- Rename sky_t members: yscale -> horizfrac, bits -> lognumtiles.
- Add default sky (8 tiles, horizfrac=32768 (i.e. 1/2 the scene horiz), offsets
all zero) and CLOUDYOCEAN sky (8 tiles, horizfrac=65536, offsets all zero)
to multipsky[].
- Get rid of "psky_t g_psky", merely maintaining a g_pskyidx instead. Set it up
at map load time so as to keep the behavior of the legacy per-map psky:
the last sector index with a matching psky ceiling wins.
- In mapstate_t, save g_pskyidx too, not (former) pskybits and pskyoffs[].
- Make on-map-load global psky setup consistent for the game and editor by
factoring it out into common.c: G_SetupGlobalPsky().
- Remove a couple of useless initializations, add some static assertions.
This commit is more likely to introduce subtle differences in behavior.
Specifically, getpsky() now always returns the default sky properties instead of
the global sky ones (but with all-zero offsets) when no match for a suiting
multi-psky is found. This is only likely to affect the yscale/horizfrac of
non-multi-pskies when a global non-default multi-psky has been set up.
Bump BYTEVERSION again.
git-svn-id: https://svn.eduke32.com/eduke32@3976 1a8010ca-5511-0410-912e-c29ae57300e0
- Consolidate psky* arrays into a "typedef struct psky_t" "g_psky" and
"multipsky[]".
- Factor out getting parallaxed sky properties into getpsky().
- Condense initial multi-psky setup by memcpy'ing from multipsky[].
- New function: MultiPsky_TileToIdx().
- Add new define PSKYOFF_MAX and related consistency-checking assertions.
- Lower MAXPSKYTILES to 8 to reflect current usage (was 256).
- Game: make multi-pskies consider dynamically-remapped MOONSKY1, BIGORBIT1
and LA. (Not very useful as the editor will still only act for the static
values -- 80, 84 and 89, respectively.)
An attempt has been made to preserve behavior even in strange cases, so this
commit is unlikely to introduce regressions. Because of point 6, BYTEVERSION
had to be bumped.
git-svn-id: https://svn.eduke32.com/eduke32@3975 1a8010ca-5511-0410-912e-c29ae57300e0
- Allow xoffset and yoffset to modified independently of a tile definition, much like texhitscan and nofullbright.
(Both still default to zero when a tile is specified, to keep current behavior, and because it makes sense.)
- Add actual detection of the "nofullbright" keyword, which appears to have been overlooked in r3230.
- Internal: Eliminate the need for one int32_t by condensing two variables into "flags".
git-svn-id: https://svn.eduke32.com/eduke32@3973 1a8010ca-5511-0410-912e-c29ae57300e0
The old extension is an artifact from when I was thought that extensions
should label whether a Lunatic module is to be used in internal/external
contexts.
Also, change test.lua slightly and commit a little updated documentation.
git-svn-id: https://svn.eduke32.com/eduke32@3969 1a8010ca-5511-0410-912e-c29ae57300e0
Its members are already laid out on the natural alignment boundaries.
Compilation tested with {32-bit, 64-bit} x {Lunatic, non-Lua} builds.
git-svn-id: https://svn.eduke32.com/eduke32@3968 1a8010ca-5511-0410-912e-c29ae57300e0
It didn't turn out that useful and was giving a warning with one of the
preceding changes.
git-svn-id: https://svn.eduke32.com/eduke32@3963 1a8010ca-5511-0410-912e-c29ae57300e0
Also, very slightly tweak a factor toward a "brighter" (farther visible)
scene overall to account for the "circular" nature of the fragment distance
(as opposed to an "ortho" distance in Build).
git-svn-id: https://svn.eduke32.com/eduke32@3962 1a8010ca-5511-0410-912e-c29ae57300e0
It was only ever used as upper bound to the time that a visibility change
decays, but since it does that in an exponential fashion, there's really
no point.
git-svn-id: https://svn.eduke32.com/eduke32@3961 1a8010ca-5511-0410-912e-c29ae57300e0
Now, if p->visibility differs from the constant visibility, the former converges
toward the latter by three-quartering the difference each second totalclock
increment (1/60th second).
Negative player visibilities are not handled consistently throughout the
different renderers, so make it look the same as 0 (can view to infinity).
git-svn-id: https://svn.eduke32.com/eduke32@3960 1a8010ca-5511-0410-912e-c29ae57300e0
So there's no "jump" from vis!=0 to vis=0 making the texture appear brighter.
git-svn-id: https://svn.eduke32.com/eduke32@3959 1a8010ca-5511-0410-912e-c29ae57300e0
Also, in test.elua, add a currently failing must-fail test (i.e. it wrongly
succeeds where it should not!).
git-svn-id: https://svn.eduke32.com/eduke32@3954 1a8010ca-5511-0410-912e-c29ae57300e0
Because that function might have inserted tsprites itself, e.g. for the fake
floor shadow. Also add one "spritesortcnt < MAXSPRITESONSCREEN" bound check
in legacy ROR code.
git-svn-id: https://svn.eduke32.com/eduke32@3952 1a8010ca-5511-0410-912e-c29ae57300e0
Smoothed using an exponential moving average... with a time constant of 1 sec
if I didn't miscalculate things. Also, split BYTEVERSION_JF into Lunatic and
non-Lua.
git-svn-id: https://svn.eduke32.com/eduke32@3947 1a8010ca-5511-0410-912e-c29ae57300e0
The base name is taken from the environment variable LUNATIC_TIMING_BASEFN,
which is suffixed with .actors.csv and .events.csv.
git-svn-id: https://svn.eduke32.com/eduke32@3946 1a8010ca-5511-0410-912e-c29ae57300e0
That is, for shade of objects, use shade tables. For visibility, use GL fog.
Mixing these two does not produce satisfactory results in areas where both
shade and visibility darkening are high, such as around the E1L1 restroom.
git-svn-id: https://svn.eduke32.com/eduke32@3941 1a8010ca-5511-0410-912e-c29ae57300e0
- 'copy' may have them as source, 'getarraysize' works fine
- 'setarray' and 'resizearray' are obviously forbidden
- 'readarrayfromfile' and 'writearrayfromfile' is not implemented for them
(use case?)
Also, in the Makefile: don't use realpath on directories. It may give an empty
string.
git-svn-id: https://svn.eduke32.com/eduke32@3940 1a8010ca-5511-0410-912e-c29ae57300e0
Don't yet make this official API though, since there are unresolved issues
with newly created tsprites potentially being fed back to the animation loop.
Add xmath.angvec(), xmath.bangvec(), tspr:set_sectnum(), tspr:setpos().
git-svn-id: https://svn.eduke32.com/eduke32@3937 1a8010ca-5511-0410-912e-c29ae57300e0
- check map-text version on load
- LunaCON: don't allow (back)slash as identifier char
- LunaCON stand-alone: don't resort to default directory for root file names
- document non-local control flow functions and for LunaCON, ambigious lexical
elements
git-svn-id: https://svn.eduke32.com/eduke32@3933 1a8010ca-5511-0410-912e-c29ae57300e0
Having to tag these few variables and functions as ATTRIBUTE((used))
seems sensible, but what follows is just strange. OSD_Printf? headspritesect?
git-svn-id: https://svn.eduke32.com/eduke32@3932 1a8010ca-5511-0410-912e-c29ae57300e0
- swap 2d and 3rd args in xmath.rotate() -- now rotate(point, ang, pivot)
- add vec3 method 'rotate', calling xmath.rotate
- store game tic count in savegames
git-svn-id: https://svn.eduke32.com/eduke32@3929 1a8010ca-5511-0410-912e-c29ae57300e0
- some renames of functions/methods
- con.actorvar: explicitly allow (for now) boolean and number values
- added gv.gametic, player.holdskey(), player.all(), actor.check*()/hit*(),
gv.rendmode, gv.REND, <bitint>:mask(), spr:getheightofs()
- make read of nil var in "finalized" (live) module produce error, too
- add test/helixspawner.lua
git-svn-id: https://svn.eduke32.com/eduke32@3928 1a8010ca-5511-0410-912e-c29ae57300e0
