raze-gles/source/build/src/engine_priv.h
2019-10-19 15:52:46 +02:00

242 lines
7.8 KiB
C++

// "Build Engine & Tools" Copyright (c) 1993-1997 Ken Silverman
// Ken Silverman's official web site: "http://www.advsys.net/ken"
// See the included license file "BUILDLIC.TXT" for license info.
//
// This file has been modified from Ken Silverman's original release
// by Jonathon Fowler (jf@jonof.id.au)
// by the EDuke32 team (development@voidpoint.com)
#pragma once
#ifndef ENGINE_PRIV_H
#define ENGINE_PRIV_H
#define MAXPERMS 512
#define MAXARTFILES_BASE 200
#define MAXARTFILES_TOTAL 220
#define MAXCLIPDIST 1024
// Uncomment to clear the screen before each top-level draw (classic only).
// FIXME: doesn't work with mirrors.
//#define ENGINE_CLEAR_SCREEN
#ifdef YAX_ENABLE
# define YAX_MAXDRAWS 8
#endif
extern intptr_t asm1, asm2, asm3, asm4;
extern int32_t globalx1, globaly2;
extern uint16_t sqrtable[4096], shlookup[4096+256],sqrtable_old[2048];
static inline int32_t nsqrtasm(uint32_t a)
{
// JBF 20030901: This was a damn lot simpler to reverse engineer than
// msqrtasm was. Really, it was just like simplifying an algebra equation.
uint16_t c;
if (a & 0xff000000) // test eax, 0xff000000 / jnz short over24
{
c = shlookup[(a >> 24) + 4096]; // mov ebx, eax
// over24: shr ebx, 24
// mov cx, word ptr shlookup[ebx*2+8192]
}
else
{
c = shlookup[a >> 12]; // mov ebx, eax
// shr ebx, 12
// mov cx, word ptr shlookup[ebx*2]
// jmp short under24
}
a >>= c&0xff; // under24: shr eax, cl
a = (a&0xffff0000)|(sqrtable[a]); // mov ax, word ptr sqrtable[eax*2]
a >>= ((c&0xff00) >> 8); // mov cl, ch
// shr eax, cl
return a;
}
static inline int32_t getclipmask(int32_t a, int32_t b, int32_t c, int32_t d)
{
// Ken did this
d = ((a<0)<<3) + ((b<0)<<2) + ((c<0)<<1) + (d<0);
return (((d<<4)^0xf0)|d);
}
inline int32_t getkensmessagecrc(int32_t b)
{
UNREFERENCED_PARAMETER(b);
return 0x56c764d4l;
}
inline int32_t ksqrtasm_old(int32_t n)
{
n = klabs(n);
int shift;
for (shift = 0; n >= 2048; n >>=2, shift++)
{
}
return (sqrtable_old[n]<<shift)>>10;
}
inline int32_t clip_nsqrtasm(int32_t n)
{
if (enginecompatibility_mode == ENGINECOMPATIBILITY_19950829)
return ksqrtasm_old(n);
return nsqrtasm(n);
}
extern int16_t thesector[MAXWALLSB], thewall[MAXWALLSB];
extern int16_t bunchfirst[MAXWALLSB], bunchlast[MAXWALLSB];
extern int16_t maskwall[MAXWALLSB], maskwallcnt;
extern tspriteptr_t tspriteptr[MAXSPRITESONSCREEN + 1];
extern uint8_t* mirrorBuffer;
extern int32_t xdimen, xdimenrecip, halfxdimen, xdimenscale, xdimscale, ydimen;
extern float fxdimen;
extern intptr_t frameoffset;
extern int32_t globalposx, globalposy, globalposz, globalhoriz;
extern fix16_t qglobalhoriz, qglobalang;
extern float fglobalposx, fglobalposy, fglobalposz;
extern int16_t globalang, globalcursectnum;
extern int32_t globalpal, cosglobalang, singlobalang;
extern int32_t cosviewingrangeglobalang, sinviewingrangeglobalang;
extern int32_t globalhisibility, globalpisibility, globalcisibility;
#ifdef USE_OPENGL
extern int32_t globvis2, globalvisibility2, globalhisibility2, globalpisibility2, globalcisibility2;
#endif
extern int32_t globvis, globalvisibility;
extern int32_t xyaspect;
extern int32_t globalshade;
extern int16_t globalpicnum;
extern int32_t globalorientation;
extern int16_t editstatus;
extern int16_t searchit;
extern int32_t searchx, searchy;
extern int16_t searchsector, searchwall, searchstat;
extern int16_t searchbottomwall, searchisbottom;
extern char inpreparemirror;
extern int16_t sectorborder[256];
extern int32_t qsetmode;
extern int32_t hitallsprites;
extern int32_t xb1[MAXWALLSB];
extern int32_t rx1[MAXWALLSB], ry1[MAXWALLSB];
extern int16_t bunchp2[MAXWALLSB];
extern int16_t numscans, numbunches;
extern int32_t rxi[8], ryi[8];
extern void get_wallspr_points(uspriteptr_t spr, int32_t *x1, int32_t *x2,
int32_t *y1, int32_t *y2);
extern void get_floorspr_points(uspriteptr_t spr, int32_t px, int32_t py,
int32_t *x1, int32_t *x2, int32_t *x3, int32_t *x4,
int32_t *y1, int32_t *y2, int32_t *y3, int32_t *y4);
// int32_t wallmost(int16_t *mostbuf, int32_t w, int32_t sectnum, char dastat);
int32_t wallfront(int32_t l1, int32_t l2);
void set_globalang(fix16_t const ang);
int32_t animateoffs(int tilenum, int fakevar);
static FORCE_INLINE int32_t bad_tspr(tspriteptr_t tspr)
{
// NOTE: tspr->owner >= MAXSPRITES (could be model) has to be handled by
// caller.
return (tspr->owner < 0 || (unsigned)tspr->picnum >= MAXTILES);
}
//
// getpalookup (internal)
//
static FORCE_INLINE int32_t getpalookup(int32_t davis, int32_t dashade)
{
if (getpalookup_replace)
return getpalookup_replace(davis, dashade);
return min(max(dashade + (davis >> 8), 0), numshades - 1);
}
static FORCE_INLINE int32_t getpalookupsh(int32_t davis) { return getpalookup(davis, globalshade) << 8; }
void dorotspr_handle_bit2(int32_t *sx, int32_t *sy, int32_t *z, int32_t dastat,
int32_t cx1_plus_cx2, int32_t cy1_plus_cy2,
int32_t *ret_yxaspect, int32_t *ret_xyaspect);
////// yax'y stuff //////
#ifdef USE_OPENGL
extern void polymost_scansector(int32_t sectnum);
#endif
int32_t renderAddTsprite(int16_t z, int16_t sectnum);
#ifdef YAX_ENABLE
extern int32_t g_nodraw, scansector_retfast, scansector_collectsprites;
extern int32_t yax_globallev, yax_globalbunch;
extern int32_t yax_globalcf, yax_nomaskpass, yax_nomaskdidit;
extern uint8_t haveymost[(YAX_MAXBUNCHES+7)>>3];
extern uint8_t yax_gotsector[(MAXSECTORS+7)>>3];
extern int32_t yax_polymostclearzbuffer;
static FORCE_INLINE int32_t yax_isislandwall(int32_t line, int32_t cf) { return (yax_vnextsec(line, cf) >= 0); }
#endif
#ifdef YAX_DEBUG
extern char m32_debugstr[64][128];
extern int32_t m32_numdebuglines;
# define yaxdebug(fmt, ...) do { if (m32_numdebuglines<64) Bsnprintf(m32_debugstr[m32_numdebuglines++], 128, fmt, ##__VA_ARGS__); } while (0)
# define yaxprintf(fmt, ...) do { initprintf(fmt, ##__VA_ARGS__); } while (0)
#else
# define yaxdebug(fmt, ...)
# define yaxprintf(fmt, ...)
#endif
static FORCE_INLINE void setgotpic(int32_t tilenume)
{
gotpic[tilenume>>3] |= pow2char[tilenume&7];
}
// Get properties of parallaxed sky to draw.
// Returns: pointer to tile offset array. Sets-by-pointer the other three.
static FORCE_INLINE const int8_t *getpsky(int32_t picnum, int32_t *dapyscale, int32_t *dapskybits, int32_t *dapyoffs, int32_t *daptileyscale)
{
psky_t const * const psky = &multipsky[getpskyidx(picnum)];
if (dapskybits)
*dapskybits = (pskybits_override == -1 ? psky->lognumtiles : pskybits_override);
if (dapyscale)
*dapyscale = (parallaxyscale_override == 0 ? psky->horizfrac : parallaxyscale_override);
if (dapyoffs)
*dapyoffs = psky->yoffs + parallaxyoffs_override;
if (daptileyscale)
*daptileyscale = psky->yscale;
return psky->tileofs;
}
static FORCE_INLINE void set_globalpos(int32_t const x, int32_t const y, int32_t const z)
{
globalposx = x, fglobalposx = (float)x;
globalposy = y, fglobalposy = (float)y;
globalposz = z, fglobalposz = (float)z;
}
template <typename T> static FORCE_INLINE void tileUpdatePicnum(T * const tileptr, int const obj)
{
auto &tile = *tileptr;
if (picanm[tile].sf & PICANM_ANIMTYPE_MASK)
tile += animateoffs(tile, obj);
if (((obj & 16384) == 16384) && (globalorientation & CSTAT_WALL_ROTATE_90) && RotTile(tile).newtile != -1)
tile = RotTile(tile).newtile;
}
#endif /* ENGINE_PRIV_H */