Also made the decode_vorbis function in DUMB a function pointer so that the library does not depend on high level code and can just ignore the vorbis case if no supported.
It's "doom.id.doom1/2" instead of "doom.doom1/2" now.
The config file's content will be renamed and for lump filtering a fallback has been added - note that you cannot combine both naming schemes! The old one has to be considered deprecated now.
This also removes the duplicated content necessitated by the old naming scheme.
src/posix/cocoa/i_video.mm:559:2: error: use of undeclared identifier 'atterm'
src/posix/sdl/hardware.cpp:85:28: error: ‘atterm’ was not declared in this scope
src/posix/sdl/i_input.cpp:261:10: error: ‘gamestate’ was not declared in this scope
src/posix/sdl/i_input.cpp:261:23: error: ‘GS_LEVEL’ was not declared in this scope
src/posix/sdl/i_input.cpp:263:48: error: ‘GS_INTERMISSION’ was not declared in this scope
src/posix/sdl/i_input.cpp:263:80: error: ‘GS_FINALE’ was not declared in this scope
src/posix/sdl/i_system.cpp:115:25: error: ‘atterm’ was not declared in this scope
src/posix/sdl/i_system.cpp:372:30: error: invalid use of incomplete type ‘const struct dirent’
src/posix/sdl/i_system.cpp:375:42: error: ‘findstate_t’ has not been declared
src/posix/sdl/i_system.cpp:391:12: error: request for member ‘current’ in ‘* fileinfo’, which is of non-class type ‘int’
src/posix/sdl/i_system.cpp:392:12: error: request for member ‘count’ in ‘* fileinfo’, which is of non-class type ‘int’
src/posix/sdl/i_system.cpp:392:56: error: request for member ‘namelist’ in ‘* fileinfo’, which is of non-class type ‘int’
src/posix/sdl/i_system.cpp:393:22: error: ‘alphasort’ was not declared in this scope
src/posix/sdl/i_system.cpp:393:31: error: ‘scandir’ was not declared in this scope
src/posix/sdl/i_system.cpp:394:16: error: request for member ‘count’ in ‘* fileinfo’, which is of non-class type ‘int’
src/posix/sdl/i_system.cpp:401:31: error: ‘findstate_t’ has not been declared
src/posix/sdl/i_system.cpp:403:2: error: ‘findstate_t’ was not declared in this scope
src/posix/sdl/i_system.cpp:403:15: error: ‘state’ was not declared in this scope
src/posix/sdl/i_system.cpp:403:37: error: expected primary-expression before ‘)’ token
src/posix/sdl/i_system.cpp:404:33: error: request for member ‘count’ in ‘* fileinfo’, which is of non-class type ‘int’
src/posix/sdl/i_system.cpp:406:39: error: request for member ‘count’ in ‘* fileinfo’, which is of non-class type ‘int’
src/posix/sdl/i_system.cpp:413:2: error: ‘findstate_t’ was not declared in this scope
src/posix/sdl/i_system.cpp:413:15: error: ‘state’ was not declared in this scope
src/posix/sdl/i_system.cpp:413:37: error: expected primary-expression before ‘)’ token
src/posix/sdl/i_system.cpp:425:16: error: ‘findstate_t’ was not declared in this scope
src/posix/sdl/i_system.cpp:425:29: error: expected primary-expression before ‘const’
src/posix/sdl/i_system.cpp:426:1: error: expected ‘,’ or ‘;’ before ‘{’ token
src/posix/sdl/i_main.cpp:160:6: error: ‘gamestate’ was not declared in this scope
src/posix/sdl/i_main.cpp:160:19: error: ‘GS_LEVEL’ was not declared in this scope
src/posix/sdl/i_main.cpp:160:44: error: ‘GS_TITLELEVEL’ was not declared in this scope
src/posix/sdl/i_main.cpp:217:18: error: ‘atterm’ was not declared in this scope
src/posix/sdl/i_main.cpp:242:11: error: ‘I_Quit’ was not declared in this scope
src/gameconfigfile.cpp:126:27: error: ‘SHARE_DIR’ was not declared in this scope
src/scripting/decorate/thingdef_parse.cpp:929:2: error: use of undeclared identifier 'strlwr'; did you mean 'strlen'?
src/scripting/decorate/thingdef_parse.cpp:937:3: error: use of undeclared identifier 'strlwr'; did you mean 'strlen'?
src/scripting/decorate/thingdef_states.cpp:564:2: error: use of undeclared identifier 'strlwr'; did you mean 'strlen'?
src/scripting/vm/jit_runtime.cpp:957:2: error: ‘unique_ptr’ is not a member of ‘std’
src/scripting/vm/jit_runtime.cpp:957:38: error: expected primary-expression before ‘>’ token
src/scripting/vm/jit_runtime.cpp:957:40: error: ‘nativeSymbols’ was not declared in this scope
src/utility/cmdlib.cpp:962:2: error: ‘DIR’ was not declared in this scope
src/utility/cmdlib.cpp:962:7: error: ‘directory’ was not declared in this scope
src/utility/cmdlib.cpp:962:34: error: ‘opendir’ was not declared in this scope
src/utility/cmdlib.cpp:967:33: error: ‘readdir’ was not declared in this scope
src/utility/cmdlib.cpp:969:10: error: invalid use of incomplete type ‘struct ScanDirectory(TArray<FFileList>&, const char*)::dirent’
src/utility/cmdlib.cpp:973:34: error: invalid use of incomplete type ‘struct ScanDirectory(TArray<FFileList>&, const char*)::dirent’
src/utility/cmdlib.cpp:985:20: error: ‘closedir’ was not declared in this scope
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
When running in a confined environment (such as a snap) it may not be
possible to write to directories such as ~/.config. By using the $HOME
variable instead of the '~' shortcut, the confined environment can pass
an alternative 'home' directory with write privelges.
I have only changed this for posix/unix and haven't touched code for
MacOS, as I don't know if that behaves differently
This is to ensure that the Class pointer can be set right on creation. ZDoom had always depended on handling this lazily which poses some problems for the VM.
So now there is a variadic Create<classtype> function taking care of that, but to ensure that it gets used, direct access to the new operator has been blocked.
This also neccessitated making DArgs a regular object because they get created before the type system is up. Since the few uses of DArgs are easily controllable this wasn't a big issue.
- did a bit of optimization on the bots' decision making whether to pick up a health item or not.
- all 5 settings affected by uiscale have been changed to have the exact same semantics: -1, if supported means special scaling, this is available for HUD and status bar, 0 means to use uiscale, any larger value is a direct scaling factor.
- scaling is cut off when the factor is larger than screenwidth/320 or screenheight/200 because anything larger will definitely not fit.
- a lot of code has been cleaned up and consolidated. Especially the message code had an incredible amount of redundancy.
- all scaling options have been moved into a submenu. This menu is not complete, though - it still requires a special menu widget to convey the intended information without confusing the user.
- better handling of ForceScale for the fullscreen HUD that doesn't mess around with CVARs.
- moved the mug shot into the status bar, because this is global state that needs to be shared between different pieces of code which want to display a mug shot.
- SBARINFO should work off the current status bar settings instead of the ones stored in its script object
This has an important implication:
Previously the config was loaded before IWADINFO so in order to allow the config to access the data this had to be switched around.
This means that zdoom.pk3 will not be looked for in the global IWAD search paths anymore, but since it shouldn't be there to begin with it should be an acceptable compromise.
As a result the old 'Group' property could be removed and all other means to get a section name were disabled.
As an example, if the code gets 'doom.doom2.commercial' it will use the following sections in this order:
global.autoload
doom.autoload
doom.doom2.autoload
doom.doom2.commercial.autoload.
* add new Autoname "HereticSR" for Heretic: Shadow of the Serpent Riders.
* add missing CreateSectionAtStart() calls for Chex1, HereticSR,
Freedoom2, DoomBFG and Doom2BFG.
* remove Autoname "HexenDemo" because shareware games do not allow
loading any custom content.
The 'unix' identifier isn't defined when '-std' is passed to the compiler (tested with gcc and clang), so use '__unix__' which is well enough documented.
- Use functions in gitinfo.cpp to retrieve the strings from gitinfo.h so
that changes to gitinfo.h only require recompiling one file instead of
several.
- Separated CVAR_MODARCHIVE into CVAR_MOD|CVAR_ARCHIVE so that mod-defined cvars can still be
identified when they aren't meant to be archived.
SVN r4281 (trunk)
of the form:
<scope> [noarchive] <type> <name> [= <defaultvalue>];
Where <scope> is one of:
* server: This cvar is shared by all players, and in network games, only select players can
change it.
* user: Each player has their own copy of this cvar, which they can change independently.
To prevent the cvar from being written to the config file, add noarchive to its definition.
<Type> is one of:
* int: An integral value. Defaults to 0.
* float: A value that can include a fraction. Defaults to 0.0.
* color: A color value. Default to black ("00 00 00").
* bool: A boolean value that can hold either true or false. Defaults to false.
* string: A string value. It's not too useful for mods but is included for completeness. Defaults to "".
<Name> is the cvar's name and must begin with a letter and may only include alphanumeric
characters and the underscore character.
If you wish a non-standard default add an = character after the cvar's name followed by the
default value you want to use. Example:
server int mymod_coolness = 10;
- Fixed: FStringCVar::SetGenericRepDefault() did not make a copy of the input string.
SVN r4280 (trunk)
