Commit graph

14 commits

Author SHA1 Message Date
Randy Heit
55142078d8 Normalize line endings 2016-03-01 09:47:10 -06:00
Randy Heit
e259087c19 Change RGB32k to a union of BYTE[32][32][32] and BYTE[32*32*32]
- Clang's optional runtime array bounds checking doesn't understand when we
  intentionally "overflow" by doing this:
    RGB32k[0][0][colorval]
  It will warn that it was accessed at an index will past the bounds
  of type 'BYTE [32]', which makes it less than useful for catching real
  array bounds overflows. So now do this:
    RGB32k.All[colorval]
  And if you want this:
    RGB32k[r][g][b]
  Now do this:
    RGB32k.RGB[r][g][b]
2015-03-08 18:05:02 -05:00
Randy Heit
2add3fb381 - Merge voxels back into trunk. Even if it needs further tweaking, it should at least be stable now.
SVN r3086 (trunk)
2011-01-02 18:02:27 +00:00
Christoph Oelckers
545a892faa - added Firebrand's patch to rename 'swap' due to naming conflicts in newer MSVC compilers.
SVN r2449 (trunk)
2010-07-23 21:19:59 +00:00
Randy Heit
dda5ddd3c2 - Ported vlinetallasm4 to AMD64 assembly. Even with the increased number of
registers AMD64 provides, this routine still needs to be written as self-
  modifying code for maximum performance. The additional registers do allow
  for further optimization over the x86 version by allowing all four pixels
  to be in flight at the same time. The end result is that AMD64 ASM is about
  2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
  (For further comparison, AMD64 C and x86 C are practically the same for
  this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
  most likely candidate, but it's not used enough at this point to bother.
  Also, this may or may not work with Linux at the moment, since it doesn't
  have the eh_handler metadata. Win64 is easier, since I just need to
  structure the function prologue and epilogue properly and use some
  assembler directives/macros to automatically generate the metadata. And
  that brings up another point: You need YASM to assemble the AMD64 code,
  because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
  VC++ still throws around unneccessary register moves. GCC seems to be
  pretty close to optimal, requiring only about 2 cycles/color. They're
  both faster than my hand-written MMX routine, so I don't need to feel
  bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
  instructions, and unrolled it once, shaving off about 80 cycles from the
  time required to blend 256 palette entries. Why? Because I tried writing
  a C version of the routine using compiler intrinsics and was appalled by
  all the extra movq's VC++ added to the code. GCC was better, but still
  generated extra instructions. I only wanted a C version because I can't
  use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
  of a pain. (It's a pain because Linux and Windows have different calling
  conventions, and you need to maintain extra metadata for functions.) So,
  the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
  were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
  only for AMD processors, so we must not use it on other architectures, or
  we end up overwriting the L1 cache line size with 0 or some other number
  we don't actually understand.


SVN r1134 (trunk)
2008-08-09 03:13:43 +00:00
Randy Heit
dc82a26c8a - Fixed: The colormap changes by column, so the assembly rt_* routines need
to be setup for every column group, not once per image.


SVN r775 (trunk)
2008-02-28 22:15:24 +00:00
Randy Heit
965bfda5fe - Fixed: rt_Translate1col() had a couple of bugs.
SVN r774 (trunk)
2008-02-28 21:15:13 +00:00
Randy Heit
db5938d22a - Added assembly versions of rt_add4cols and rt_addclamp4cols.
SVN r773 (trunk)
2008-02-28 05:24:06 +00:00
Randy Heit
9cb674c60c - Added an assembly version of rt_shaded4cols, since that's the main decal
drawing function. The most improvement came from being able to turn some
  constant variables into immediate values with self-modifying code, but I
  also managed to reorder it to make it a little faster. It's about 9% faster
  than VC++'s code and 19% faster than GCC's code. That's not a huge
  improvement (for VC++), but at least it's measurable.
- Removed the solid fill "optimization" from rt_shaded4cols(), because in my
  testing, it didn't help any and in fact, hurt just a little bit.
- In the name of simplification, all the rt_tlate* drawers were changed to do
  the translation in one step and the drawing in another. This lets me call
  the untranslated drawer to do the real drawing instead of mostly duplicating
  them. Performance wise, there is practically no difference from before.


SVN r771 (trunk)
2008-02-27 03:11:35 +00:00
Randy Heit
e5572a1c4e - Updated lempar.c to v1.31.
- Added .txt files to the list of types (wad, zip, and pk3) that can be
  loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
  support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
  with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
  on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
  scope than before. The skipped entry is assumed to always be at 248, and
  it is assumed that all Shader Model 1.4 cards suffer from this. That's
  because all SM1.4 cards are based on variants of the ATI R200 core, and the
  RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
  other flavors of the R200 are any different. (Interesting note: With the
  Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
  debug Direct3D 9 runtime, but it works perfectly fine with the retail
  Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
  math inside pixel shaders. That would explain perfectly why I can't use
  constants greater than 1 with PS1.4 and why it can't do an exact mapping to
  every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
  "color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
  completely setup, meaning that Shader Model 1.4 cards could not change
  resolution.
- I have decided to let remap palettes specify variable alpha values for
  their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
  reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
  when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
  (Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
  gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
  unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
  being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
  accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
  multiple script scanner states can be stored without being forced to do so
  recursively. I think I might be taking advantage of that in the near
  future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
  * Fixed: When using even length values in drawnumber it would cap to a 98
    value instead of a 99 as intended.
  * The SBarInfo parser can now accept negatives for coordinates. This
    doesn't allow much right now, but later I plan to add better fullscreen
    hud support in which the negatives will be more useful. This also cleans
    up the source a bit since all calls for (x, y) coordinates are with the
    function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
  software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
  space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
  STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
  gets blended with the background, since that seems like a good idea for
  reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
  Since the ERenderStyle enumeration was getting rather unwieldy, I converted
  it into a new FRenderStyle structure that lets each parameter of the
  blending equation be set separately. This simplified the set up for the
  blend quite a bit, and it means a number of new combinations are available
  by setting the parameters properly.


SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
Randy Heit
94ffa6d5ae - Added << operators for FString that function exactly like +=, except they
are left-associative, so you can use them like you would with an ostream
  and append to a string in a single expression without any overhead from
  allocating temporary strings as would happen if you used the + operator.
  In other words, instead of this:
     string += "Some string " + "that is assembled" + " in parts";
  You can do this and be more efficient while still being just as readable:
     string << "Some string " << "that is assembled" << " in parts";
- Changed PCD_PRINTBIND to include the command in its output if it isn't
  bound.
- Fixed: ACS_ExecuteWithResultValue could not be used inside a script because
  DLevelScript::RunScript() was not reentrant, thanks to having a global stack.
  The stack should be local to each instance of RunScript.
- Fixed: rt_draw4cols() could get stuck in rare situations where it thinks it
  should be drawing something but doesn't. Since long-term I plan to just
  replace all the masked drawing the variants of maskwallscan, I'm not going
  to try and find the real cause and fix it there. Instead, it just detects
  the situation and bails out when it finds it.


SVN r492 (trunk)
2007-02-24 17:56:43 +00:00
Randy Heit
c412b42703 - Fixed: cycle_t was still a DWORD and not a QWORD under GCC.
- The stat meters now return an FString instead of sprintfing into a fixed
  output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
  - For consistancy with the other integral types, byte is no longer a
    synonym for BYTE.
  - Most uses of BOOL have been change to the standard C++ bool type. Those
    that weren't were changed to INTBOOL to indicate they may contain values
    other than 0 or 1 but are still used as a boolean.
  - Compiler-provided types with explicit bit sizes are now used. In
    particular, DWORD is no longer a long so it will work with both 64-bit
    Windows and Linux.
  - Since some files need to include Windows headers, uint32 is a synonym
    for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
  was all it contained.


SVN r326 (trunk)
2006-09-14 00:02:31 +00:00
Randy Heit
e2179d5c2d Guess what. It's not 2005 anymore.
SVN r184 (trunk)
2006-06-11 01:37:00 +00:00
Randy Heit
cf11cbdb30 Directory restructuring to make it easier to version projects that don't build zdoom.exe.
SVN r4 (trunk)
2006-02-24 04:48:15 +00:00