- move D_LoadWadSettings to keysections.cpp.
- made some more data reloadable.
- data structures filled by P_SetupLevel should be cleared before loading the level. They can remain non-empty in case of an error. There's probably more to fix here...
- fixed: MidiDevices and MusicAliases were not cleared before reloading local SNDINFOs.
- fixed signed/unsigned warnings in AddSwitchPair for real (GCC really allows -1u? MSVC prints a warning for that.)
SVN r3036 (trunk)
- Was there any reason why the MIDI_GUS device was so well hidden from the user? It sure does not sound broken. Added it to MIDI menu and $mididevice.
SVN r2862 (trunk)
way MP3 obfuscates custom tags. Vorbis and FLAC are fine. (I could make it work with MP3,
but you should be using Vorbis instead.) They are:
* LOOP_START: Start time for the loop. If omitted, the song repeats from the beginning.
* LOOP_END: End time for the loop. If omitted, the song loops at the end. (If you need to specify this, why aren't you using a shorter song.)
You only need to specify one of these tags to set the custom loop. Naturally, you can set
them both, as well. The format for each tag is the same:
* If it contains a colon (:), it specifies by time. This may be of the form 00:00:00.00
(HH:MM:SS.ss) to specify by play. Various parts may be left off. e.g. To start the loop
at 20 seconds in, you can use ":20", 0:20", "00:00:20", ":20.0", etc. Values after the
decimal are fractions of a second and accurate to one millisecond.
* If you don't include a colon but just have a raw number, then it's the number of PCM
samples at which to loop.
* Any characters other than digits (0-9), colons (:), or a single decimal point for the
seconds portion will result in the tag being ignored.
SVN r2424 (trunk)
* Second argument: Volume scalar. 0 and 128 are normal volume. (Where "normal" is whatever
it was defined with in SNDINFO.) Other values scale it accordingly.
* Third argument: Minimum distance before volume fading starts.
* Fourth argument: Maximum distance at which the sound is audible. Setting either of these to 0
will use whatever they were defined with in SNDINFO.
SVN r2214 (trunk)
- fixed: The sound channel structure should not store the sound table's entries' addresses which are stored in a TArray by pointer. In case the array gets reallocated very bad things can happen. This caused some bad crashes when GZDoom's FraggleScript implementation created new sound entries.
SVN r2114 (trunk)
do it the old way and scan every channel to see if it matches an actor/
entchannel pair.
- Fixed: S_RelinkSounds() did not move the SoundChans bitfield to the new
actor.
- Fixed: Stolen channels could be kept around by the high-level channels
indefinitely.
SVN r1289 (trunk)
structure.
- Fixed: Items which should stay but had an IF_ALWAYSPICKUP flag were removed.
- Fixed: The pickup flash must only play when an item is picked up so the
correct place to spawn it is in AInventory::Touch, not in AInventory::GoAway.
SVN r1278 (trunk)
The rolloff and channel ended callbacks now call functions in s_sound.cpp
instead of working on the data itself and GSnd->StopSound has been replaced
with S_StopChannel.
SVN r1227 (trunk)
method to the SoundRenderer class so that this function doesn't need to
load the sound for the NullSoundRenderer.
- Took some more non-FMOD related code out of fmodsound.cpp, including the
code that checks for raw and Doom sounds. This means that sfxinfo_t is no
longer needed in the SoundRenderer class so I took out all references to it.
SVN r1208 (trunk)
to the rolloff information back to NULL when starting the sound fails.
- Fixed: Rolloff information was taken from the sfxinfo that contained the
actual sound data, not the one that was used for starting the sound.
SVN r1206 (trunk)
and sectors are done in s_sound.cpp and not in fmodsound.cpp. Also removed
several 'sector' parameters because they were never used inside the sound code.
SVN r1200 (trunk)
during it.
- UI sounds are now omitted from savegames.
- Fixed: Menu sounds had been restricted to one at a time again.
- Moved the P_SerializeSounds() call to the end of G_SerializeLevel() so that
it will occur after the players are loaded.
- Added fixes from FreeBSD for 0-length and very large string buffers
passed to myvsnprintf.
SVN r1063 (trunk)
arbitrary point. It has been replaced with a variant that takes a polyobject
as a source, since that was the only use that couldn't be rewritten with the
other variants. This also fixes the bug that polyobject sounds were not
successfully saved and caused a crash when reloading the game. Note that
this is a significant change to how equality of sound sources is determined,
so some things may not behave quite the same as before. (Which would be a
bug, but hopefully everything still sounds the same.)
SVN r1059 (trunk)
the rest of the game is concerned, these sounds will never stop once they
have been started until they are explicitly stopped. If they are evicted
from their channels, the sound code will restart them as soon as possible.
This means that instead of this:
if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1))
{
S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM);
}
The following is now just as effective:
S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM);
There are also a couple of other ramifications presented by this change:
* The full state of the sound system (sans music) is now stored in save
games. Any sounds that were playing when you saved will still be
playing when you load. (Try saving while Korax is making a speech in
Hexen to hear it.)
* Using snd_reset will also preserve any playing sounds.
* Movie playback is disabled, probably forever. I did not want to
update the MovieDisable/ResumeSound stuff for the new eviction
tracking code. A properly updated movie player will use the VMR,
which doesn't need these functions, since it would pipe the sound
straight through the sound system like everything else, so I decided
to dump them now, which leaves the movie player in a totally unworkable
state.
June 26, 2008
- Changed S_Sound() to take the same floating point attenuation that the
internal S_StartSound() uses. Now ambient sounds can use the public
S_Sound() interface.
- Fixed: S_RelinkSound() compared the points of the channels against the
from actor's point, rather than checking the channels' mover.
- Changed Strife's animated doors so that their sounds originate from the
interior of the sector making them and not from the entire vertical height
of the map.
SVN r1055 (trunk)
consideration the size and shape of the sector producing the sound. See
the lifts on Doom 2 MAP30 and compare with previous versions.
- Fixed: The stop sound for sector-based sound sequences was not played with
the CHAN_AREA flag.
- Removed the distinction between S_Sound() and S_SoundID() functions. Use
S_Sound() for both names and IDs from now on.
SVN r1034 (trunk)
any zone you want.
- Using a too-recent version of FMOD now gives an error, since there may be
breaking changes to the API from one version to the next (excluding
revisions in stable branches, which only represent bug fixes).
- Updated fmod_wrap.h for FMOD 4.16 and corrected a bug that had gone
unnoticed before: The delayhi and delaylo parameters for Channel::setDelay()
and getDelay() were swapped.
SVN r1032 (trunk)
define any new ones of its own, I'm pre-emptively renaming the SNDEAX lump
to REVERBS to remove any possible misunderstanding that this is something
that requires EAX hardware support. (Ideally, it would have been REVERBDEF,
but that's 10 characters long.) The eaxedit console command has also been
renamed to reverbedit for the same reason.
- Fixed: The Palette part of FRemapTable was not initialized with alpha values
other than 0. I'm not sure if it would be better to fix this in the game
palette that it copies from or not, but right now, they get set
unconditionally to 255.
SVN r983 (trunk)
3D panning.
- The listener's velocity is now set at 0 for the sound engine. The player
moves so fast that you can hear the doppler shift just by running around,
otherwise.
- Changed the sound code so that all sounds that start playing on a single
tic actually start playing at the exact same sample position.
SVN r927 (trunk)
command actually existed.
- Fixed: My $Limit fix from yesterday didn't work because NearLimit was
an unsigned byte and the comparisons with -1 didn't work. Made it a
signed word instead.
- Made sfxinfo_t::Link an unsigned int because it limited the amount of
usable sounds to 65535.
SVN r869 (trunk)
the song's relative volume takes effect.
- Removed the arbitrary 1024 bytes limit when the file being played is a MIDI
file. I had a D_DM2TTL that's only 990 bytes.
- Restructured I_RegisterSong so that $mididevice works again and also supports
selecting FMOD.
SVN r857 (trunk)
xlat_parser.y because both files had the same time stamp after an update,
and Lemon only rewrites the header file if it's changed.
- Added $volume SNDINFO command. This is multiplied with the volume the sound
is played at to arrive at the final volume (before distance attenuation).
- Added the CHAN_AREA flag to disable 3D panning within the min distance of a
sound. Sector sound sequences (except doors) use this flag.
- Added the CHAN_LOOP flag to replace the S_Looped* sound functions.
- Restored the sound limiting.
SVN r849 (trunk)
subject to channel overriding.
- Re-added priority selection based on sound usage.
- Reduced the number of virtual channels to match the number of real
channels.
- Added customizable rolloff, including Doom's standard linear gain rolloff.
SNDINFO commands are:
$rolloff <sound> <min distance> <max distance> -- linear gain (like Doom)
$rolloff <sound> linear <min distance> <max distance> -- linear volume
$rolloff <sound> log <min distance> <rolloff factor> -- logarithmic
$rolloff <sound> custom <min distance> <max distance> -- use SNDCURVE lump
Anything closer than min distance is full volume and anything further than
max distance is inaudible. Logarithmic rolloff does not have a maximum
distance; it has a scalar that controls how quickly the volume drops off
instead.
SVN r834 (trunk)
- Fixed: Heretic linetype translations included the wrong file.
- Removed all 2D sound positioning code from s_sound.cpp. Everything uses
FMOD's 3D engine now.
- Removed all the channel selection code from s_sound.cpp. FMOD has code to
handle this sort of thing, so let's use it.
- Replaced S_StopSoundID() with S_CheckSingular(). There is no longer a limit
on the number of copies of a particular sound that can be playing at once,
aside from Strife's special singular sounds. (Sorry, Heretic and Hexen.)
Consequently, the SNDINFO $limit command is now ignored.
- Removed ATTN_SURROUND, since FMOD Ex doesn't exactly support it, and it
only worked as intended on stereo speakers anyway.
- Cleaned out ancient crud from i_sound.cpp.
SVN r826 (trunk)
- Added a cheap pitch shifting for underwater environments that should be fairly
close to Duke's. It sounds okay for some sounds, but others like the BFG, where
the timing of the sound actually matters, don't sound good. I shall have to
replace it with a real pitch shifter DSP unit.
SVN r819 (trunk)
for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update
your SDKs. GCC users, be sure to do a "make cleandep && make clean" before
building, or you will likely get inexplicable errors.
- Fixed: If you wanted to make cleandep with MinGW, you had to specifically
specify Makefile.mingw as the makefile to use.
- Added a normalizer to the OPL synth. It helped bring up the volume a little,
but not nearly as much as I would have liked.
- Removed MIDI Mapper references. It doesn't work with the stream API, and
it doesn't really exist on NT kernels, either.
- Reworked music volume: Except for MIDI, all music volume is controlled
through GSnd and not at the individual song level.
- Removed the mididevice global variable.
- Removed snd_midivolume. Now that all music uses a linear volume scale,
there's no need for two separate music volume controls.
- Increased snd_samplerate default up to 48000.
- Added snd_format, defaulting to "PCM-16".
- Added snd_speakermode, defaulting to "Auto".
- Replaced snd_fpu with snd_resampler, defaulting to "Linear".
- Bumped the snd_channels default up from a pitiful 12 to 32.
- Changed snd_3d default to true. The new cvar snd_hw3d determines if
hardware 3D support is used and default to false.
- Removed the libFLAC source, since FMOD Ex has native FLAC support.
- Removed the altsound code, since it was terribly gimped in comparison to
the FMOD code. It's original purpose was to have been as a springboard for
writing a non-FMOD sound system for Unix-y systems, but that never
happened.
- Finished preliminary FMOD Ex support.
SVN r789 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
behind because it couldn't delete them.
- added a $MidiDevice option to SNDINFO which can either set the preferred
MIDI device for a song to Timidity or Windows' standard MIDI device.
The reason for this: About 80% of my MIDI music collection sounds better
with Timidity and the other 20% with Windows' standard synth and I'd like
to be able to use each with the one that sounds better. For MUS files you
can also force the use of OPL playback.
- added telefrag option to A_SpawnItemEx.
SVN r545 (trunk)
- Added more player water sounds:
*dive - Played when your head goes below water.
*surface - Played when your head goes back above water.
*gasp - Played when you were drowning and get your air back.
If your head surfaces and you were drowning, only *gasp plays, not both.
- Added damage-specific player death sounds, in the same fashion as the
damage-specific player pain sounds. It looks for a sound with a name like
"*death-damagetype" first and then "*death" if the first sound didn't exist.
- Removed the constraint that player sounds must be reserved before they can
be assigned. Hence, the $playerreserve command has been eliminated, because
it is no longer needed and it was never accessible from user wads, so I
don't need to worry about breaking anything by removing it.
SVN r474 (trunk)
because S_GetSoundPlayingInfo cannot properly resolve player and random sounds.
- Fixed: S_IsActorPlayingSomething has to resolve aliases and player sounds.
- Took S_ParseSndSeq call out of S_Init. This doesn't work when parsing SNDINFO
in D_DoomMain.
- Moved SNDINFO reading back to its old place after MAPINFO. This is necessary
for Hexen's music definitions.
SVN r425 (trunk)
