Commit graph

108 commits

Author SHA1 Message Date
Randy Heit
cf3b1bfd6e - Removed the 64 seg limit for polyobjects defined with Polyobj_ExplicitLine.
- Polyobj_StartLine and Polyobj_ExplicitLine can now set a line's ID. This is
  the fourth parameter for Polyobj_StartLine and the fifth parameter for
  Polyobj_ExplicitLine.


SVN r310 (trunk)
2006-08-24 19:19:15 +00:00
Christoph Oelckers
605a9a7715 May 6, 2006 (Changes by Graf Zahl)
- Converted a_zombie.cpp and most of a_strifestuff.cpp to DECORATE.
- Converted a_strifekeys.cpp to DECORATE and moved the pickup messages to the
  string table.
- Removed the WIF_HITS_GHOSTS weapon flag and replaced it with MF2_THRUGHOST. 
  There is no need to keep two flags around with virtually the same meaning.
- Changed the ShadowArmor to use the VISIBILITYPULSE flag to change its translucency.
  It looks much better now than the cheap code pointer based blinking it used before.
- Converted most of a_strifeitems.cpp to DECORATE and moved the pickup messages 
  to the string table.
- Converted a_strifearmor.cpp to DECORATE and moved the pickup messages to the
  string table.
- Moved the messages for killing spectres to the string table.
- Converted the quest items to DECORATE. Also changed A_GiveQuestItem to get
  the messages it prints from the string table instead of the quest item's tag
  string.

May 5, 2006 (Changes by Graf Zahl)
- Removed the hopelessly outdated thingdef_doc.txt file from the repository.
- Converted a_peasant.cpp and a_ratbuddy.cpp to DECORATE.
- Fixed: C_DoKey didn't treat an empty string as 'no binding' when checking for
  valid double bindings.
- Converted a_merchants.cpp to DECORATE.
- Added MF5_NODAMAGE flag to generalize the behavior of Strife's merchants which
  can be shot but take no damage from getting hurt.
- Converted a_beggars.cpp to DECORATE.
- Added an Inventory.GiveQuest property. This makes it possible to define all of
  Strife's original items that also give a quest item in DECORATE but it is also 
  useful to define items like the ones in Day of the Acolyte without ugly workarounds.
- Added a Tag property and Strife teaser conversation IDs to DECORATE so now it is 
  possible to define many of Strife's items.
- Added a FastSpeed property to DECORATE so that projectiles can finally be
  assigned a higher speed for fast mode.
- Added a ACS_LockedExecuteDoor special. It is basically the same as the existing
  ACS_LockedExecute but it uses the 'door' message instead of 'remote'. This
  cannot be integrated into ACS_LockedExecute because all its arguments are already
  in use.
- Added a fully customizable A_CustomMeleeAttack function for DECORATE.


SVN r83 (trunk)
2006-05-07 00:27:22 +00:00
Randy Heit
c8cdb52863 - Removed generational garbage collection from the string pool because it didn't
actually work.
- Turned the list of TabCommands into a TArray because I saw lots of console
  commands in the memory leak report at exit. Then I realized those were actually
  key bindings, so I changed the Bindings and DoubleBindings arrays into FString
  arrays.
- Fixed: FStringCVar was missing a destructor.
- Added TArray::Insert().
- Fixed: TArray::Delete() used memmove().
- Renamed Malloc(), Realloc(), and Calloc() to M_Malloc(), M_Realloc(), and
  M_Calloc() so that the debug versions can be defined as macros.
- Enabled the CRT's memory leak detection in WinMain().
- Moved contents of PO_DeInit() into P_FreeLevelData().
- Removed "PolyBlockMap = NULL;" from P_SetupLevel(), because the P_FreeLevelData()
  call it makes next does the exact same thing, but also freeing it if needed.
- Fixed: Unneeded memcpy in UnpackUserCmd() when ucmd and basis are the same


SVN r75 (trunk)
2006-05-04 03:49:46 +00:00
Randy Heit
7e7ab6b4ec - Fixed compilation with mingw again.
- Added multiple-choice sound sequences. These overcome one of the major
  deficiences of the Hexen-inherited SNDSEQ system while still being Hexen
  compatible: Custom door sounds can now use different opening and closing
  sequences, for both normal and blazing speeds.
- Added a serializer for TArray.
- Added a countof macro to doomtype.h. See the1's blog to find out why
  it's implemented the way it is.
    <http://blogs.msdn.com/the1/articles/210011.aspx>
- Added a new method to FRandom for getting random numbers larger than 255,
  which lets me:
- Fixed: SNDSEQ delayrand commands could delay for no more than 255 tics.
- Fixed: If you're going to have sector_t.SoundTarget, then they need to
  be included in the pointer cleanup scans.
- Ported back newer name code from 2.1.
- Fixed: Using -warp with only one parameter in Doom and Heretic to
  select a map on episode 1 no longer worked.
- New: Loading a multiplayer save now restores the players based on
  their names rather than on their connection order. Using connection
  order was sensible when -net was the only way to start a network game,
  but with -host/-join, it's not so nice. Also, if there aren't enough
  players in the save, then the extra players will be spawned normally,
  so you can continue a saved game with more players than you started it
  with.
- Added some new SNDSEQ commands to make it possible to define Heretic's
  ambient sounds in SNDSEQ: volumerel, volumerand, slot, randomsequence,
  delayonce, and restart. With these, it is basically possible to obsolete
  all of the $ambient SNDINFO commands.
- Fixed: Sound sequences would only execute one command each time they were
  ticked.
- Fixed: No bounds checking was done on the volume sound sequences played at.
- Fixed: The tic parameter to playloop was useless and caused it to
  act like a redundant playrepeat. I have removed all the logic that
  caused playloop to play repeating sounds, and now it acts like an
  infinite sequence of play/delay commands until the sequence is
  stopped.
- Fixed: Sound sequences were ticked every frame, not every tic, so all
  the delay commands were timed incorrectly and varied depending on your
  framerate. Since this is useful for restarting looping sounds that got
  cut off, I have not changed this. Instead, the delay commands now
  record the tic when execution should resume, not the number of tics
  left to delay.


SVN r57 (trunk)
2006-04-21 01:22:55 +00:00
Randy Heit
735e6d72c4 - Added Jim's Makefile.linux;
- Changed: Decal scales now use full precision fixed point numbers.
- Changed: Keeping impact decals in their own statlist is enough to keep track
  of them for when one needs to be destroyed. There's no need to maintain a
  separate list for them.
- Fixed: Decal actors did not spread their decals across neighboring walls.
- Fixed: Decal groups did not initialize their IDs and could not be reliably
  used with the decal actor.
- Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal()
  now uses the decal's LeftDistance to calculate its visible location, so it
  always stays in sync with the wall's vertices. This also lets me dump some
  code from the polyobjects that maintained the decals' (x, y) coordinates.
  Also, the decals' x and y information is redundant and can be removed.
  Doing this revealed a bug with slider decals and horizontal sliding:
  That is, it didn't work at all. I have opted to simply remove the horizontal
  sliding support so that I don't have to worry about what happens when a
  decal slides across the edge of a wall.
- Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number.
  It should be 2.30 fixed point.


SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
Randy Heit
e815474cbe - Fixed: ACS improperly calculated the address of local variables when
returning from one function to another function when the function that
  was called was used as part of an expression.
- Fixed: Using Thing_Hate with arg0 (hater) set to 0 from an open script
  could crash.
- Fixed: Some items along ledges in Hexen's MAP32 (Orchard of Lamentations)
  appeared at the bottom of the ledge (and consequently inside it) instead
  of on top of it because the items were placed directly on the lines.
  AActor::LinkToWorldForMapThing() needs to use the original R_PointOnLineSide()
  code to handle situations like this. Previously, it just used the original
  code for straight horizontal/vertical lines and used the new code for
  diagonal lines.
- Fixed: FWadCollection::MergeLumps() used in incorrect realloc.
- Fixed: FPlayList::NextLine() did not properly handle blank lines in the
  playlist.
- Changed: Decals now use lightweight thinkers instead of actors. (76 bytes
  versus 396, so you save 320k if you have 1024 decals present.)
- Fixed: Wads added with pullin were loaded immediately after the IWAD.
  Exec files are now processed immediately before -file but after autoloading
  wads in D_DoomMain().
- Fixed: sdl/i_system.h unconditionally defined SHARE_DIR, preventing
  redefinition from the command line.
- Fixed: The standard way to include SDL.h is <SDL.h>, not <SDL/SDL.h>.
- Fixed: Returned FActiveInterpolation::HashKey()'s return type to size_t,
  avoiding a pointer truncation warning.


SVN r30 (trunk)
2006-04-12 01:50:09 +00:00
Christoph Oelckers
25f90d6221 SVN r27 (trunk) 2006-04-11 16:27:41 +00:00
Randy Heit
cf11cbdb30 Directory restructuring to make it easier to version projects that don't build zdoom.exe.
SVN r4 (trunk)
2006-02-24 04:48:15 +00:00