Commit graph

48 commits

Author SHA1 Message Date
MajorCooke
c972caa9f3 - Added rollIntensity and rollWave to A_QuakeEx.
- Instead of moving the camera around, it rolls the camera.
- This only has an effect in GZDoom.
2016-04-27 13:42:15 +02:00
MajorCooke
c8ba6f0611 Fixed quake falloff not working in floatcvt branch. 2016-03-24 18:30:23 +01:00
Christoph Oelckers
4a79602325 - floatification of g_shared.
- rewrote FraggleScript's movecamera function because it was utterly incomprehensible.
2016-03-24 01:46:11 +01:00
Christoph Oelckers
6557f3b8c8 - floatified quake and weapon code 2016-03-23 20:45:48 +01:00
Christoph Oelckers
2dbd79cc8d - floatified the return data from Trace(). 2016-03-23 18:07:04 +01:00
Christoph Oelckers
70d87f94f2 Merge branch 'master' into floatcvt
# Conflicts:
#	src/p_acs.cpp
#	src/r_utility.cpp
#	src/thingdef/thingdef_codeptr.cpp
#	src/version.h
2016-03-23 14:15:24 +01:00
Christoph Oelckers
0d1fbcf65f - flattened the following commits by Major Cooke:
* Added falloff parameter to A_QuakeEx.
- Treated just like A_Explode's 'fullradiusdamage' parameter, where the quake will fall off from this distance on out to the edge. Default is 0, which means no falloff.
- Credits to MaxED and Michaelis for helping.

* - Added HighPoint parameter to QuakeEx.
- Allows fine tuning of where the quake's maximum or minimum occurs, in tics. This must be a range between [1, duration).
- For up or down scaling quakes, this sets the quake to reach maximum sooner or start minimizing later.
- For both, this indicates when the strongest will occur. Default is 0, or in the middle.

The original commits were nearly impossible to find in the convoluted commit tree, so I think it's preferable to have one clean commit instead.
2016-03-23 14:03:10 +01:00
Christoph Oelckers
8362c6a856 - conversion of floorz to double. 2016-03-20 19:52:35 +01:00
Christoph Oelckers
0bdb65c477 - made AActor::radius a double.
This means that all files in g_doom are now fully converted.
2016-03-20 15:04:13 +01:00
Christoph Oelckers
a4f5846c7c - replaced all uses of P_ThrustMobj with the already implemented AActor::Thrust method and deleted this function.
- for quakes, making a distinction between circular and elliptic thrust is pointless, so the checks were removed and both paths consolidated. The elliptic code will do exactly the same for circles and there isn't even a performance difference.
2016-03-20 01:25:47 +01:00
Christoph Oelckers
a43dccaa86 Merge branch 'master' into floatcvt
# Conflicts:
#	src/g_hexen/a_heresiarch.cpp
#	src/g_shared/a_quake.cpp
2016-03-20 00:56:09 +01:00
Christoph Oelckers
51b05d331d - replaced AActor::vel and player_t::Vel with a floating point version.
- Converted P_MovePlayer and all associated variables to floating point because this wasn't working well with a mixture between float and fixed.

Like the angle commit this has just been patched up to compile, the bulk of work is yet to be done.
2016-03-20 00:54:18 +01:00
Christoph Oelckers
0ef9ee23b1 - fixed: When the intensity values of DEarthquake were converted to fixed point, its uses in DEarthquake::Tick were not changed along. 2016-03-19 12:01:10 +01:00
Christoph Oelckers
671291227e - first stage of converting actor angles to float complete
Patched up everything so that it compiles without errors again. This only addresses code related to some compile error. A large portion of the angle code still uses angle_t and converts back and forth.
2016-03-16 12:41:26 +01:00
Christoph Oelckers
c64eee5b15 Merge branch 'master' into float
# Conflicts:
#	src/g_heretic/a_hereticweaps.cpp
#	src/p_map.cpp
#	src/p_mobj.cpp
#	src/p_things.cpp
#	src/portal.cpp
2016-03-15 00:16:13 +01:00
Christoph Oelckers
651817fad7 - made AActor::velx/y/z and player_t::velx/y fixedvec's.
(This commit is 95% search & replace with only a few places where velz was used as a local variable changed.)
2016-03-12 14:11:43 +01:00
Christoph Oelckers
161d03231a - added custom math routines for reliability. 2016-03-11 15:45:47 +01:00
Randy Heit
55142078d8 Normalize line endings 2016-03-01 09:47:10 -06:00
Christoph Oelckers
6adb069506 - rewrote p_local.h so that it doesn't pull in the entire bunch of headers.
This was to resolve some circular dependencies with the portal code.
The most notable changees:

 * FTextureID was moved from textures.h to doomtype.h because it is frequently needed in files that don't want to do anything with actual textures.
 * split off the parts from p_maputl into a separate header.
 * consolidated all blockmap related data into p_blockmap.h
 * split off the polyobject parts into po_man.h
2016-02-15 02:14:34 +01:00
Christoph Oelckers
27aeb6a656 - g_shared refactored 2016-01-19 13:26:05 +01:00
Christoph Oelckers
1e2ce9a622 - some refactoring of P_AproxDistance calls into newly defined AActor method AproxDistance.
The main reason here is to reduce the number of instances where AActor::x and AActor::y are being referenced.
2016-01-10 17:52:41 +01:00
Randy Heit
156d1e61fd Use sub-tic accuracy for smooth sine quakes
- Converting the wave speed back to floats, since I'm using sin() instead
  of the finesine table now.
- Pre-shift the quake intensities to avoid extra shifting in GetModIntensity.
- Loading old saves will shift the intensities to fixed point but will not
  convert the fixed wave speeds to floats. The chances of this
  being in a savegame where the speeds are non-zero is pretty much nil,
  and int and floating point 0 are bitwise identical (not counting -0.0).
2015-03-02 19:23:24 -06:00
MajorCooke
6b83dcab89 - Fixed broken regular quakes. 2015-03-01 21:40:03 -06:00
Randy Heit
dca5f0e908 Added QF_SINE
- Squashed commit of the following:

commit bc45fe3263d34ef5f746f524687999c19bf7b779
Author: Randy Heit <rheit@users.noreply.github.com>
Date:   Sun Mar 1 18:51:05 2015 -0600

    wave scale -> wave speed

commit ff96388b128c724c1198757bfa52f1935a263356
Author: Randy Heit <rheit@users.noreply.github.com>
Date:   Sun Mar 1 18:45:32 2015 -0600

    More sine quake fixes

commit 2a89749a6fe6d271b9fbdc218779f680afcf4cb6
Merge: 719dfbe 5456074
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Sat Feb 28 20:37:22 2015 -0600

    Added QF_WAVE to A_QuakeEx.
    - Changes the random quakes into a sine wave (see Shadow Warrior/Rise of the Triad reboots, Hard Reset, etc.)
    - Added 3 properties to control waves per second along each individual axis. Only works with QF_WAVE.
    - Intensity X/Y/Z property becomes the amplitude of the wave.
    - Stacks with regular quakes, allowing shaking along the camera which must be called using A_QuakeEx WITHOUT the flag, or the other quaking functions.
    - Uses the youngest quake's time for positioning.

commit 54560741581e8d15cc7060e8e068cf85e9a4b432
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Sat Feb 28 20:21:19 2015 -0600

    Recommitted recommended changes by Randi, with some modifications. Now, we should be finished!

commit 6f4473013411686d88fc185bdc1cc58b1035b0f1
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Sat Feb 28 12:52:57 2015 -0600

    Finish this revert.

commit 467e53f9400f588a2ada9b32e7634cb1f4ad5066
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Sat Feb 28 12:46:02 2015 -0600

    Reverted back to what was working.

commit da9de56a67efda08036e481fd5fccd5392ce6810
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Thu Feb 26 18:53:20 2015 -0600

    Forgot this bit, for testing.

commit c5093d9bb97caf8478cefc32abc56a036feeea58
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Thu Feb 26 18:52:46 2015 -0600

    Some more progress, but...
    - This did not solve anything. In fact, it did the opposite -- completely broke wave quakes. Now they only happen whenever a random quake is in progress.
    - Left in the commented code on purpose so Randi can test it.

commit 7e526405d2127cbb279f66008c8f8e55a5d497f3
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Wed Feb 25 17:50:42 2015 -0600

    - Use newest waveform timer, not oldest.

commit 1356443609dbc6c7f46e081d0846816dc0836124
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Wed Feb 25 17:32:09 2015 -0600

    - Got regular quakes to multiply onto sine quakes, but the vice versa needs fixing too.

commit d95796c94c70cd0229d4a6d30f69e3a7568b9588
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Wed Feb 25 16:46:21 2015 -0600

    - Last hurdle. Now just need to figure out how to properly scale up and down.

commit 4bc3458e689155ce72c09776604d9eb4fa73d8be
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Tue Feb 24 23:18:03 2015 -0600

    - Fixed the quakes being unstackable.

commit b51012d6d4ea065bf7f6fc9c1a0472966491f7af
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Mon Feb 23 23:48:34 2015 -0600

    QF_WAVE renamed from SINE.
    - Lots of ground covered, but still more to go.
    - Still need to figure out how to make the camera properly shudder.

commit 427e4893193470bbf45415ffec70a0b69b8cccfd
Author: MajorCooke <paul.growney22@gmail.com>
Date:   Sun Feb 22 16:52:30 2015 -0600

    - Begin the groundworks for QF_SINE.
    - Need to figure out how to rework and manipulate the sine wave to move faster, and to allow going below 0 without breaking it too much.
2015-03-01 18:53:34 -06:00
Randy Heit
2827c13d0c Rewrite new quake stuff for correctness
- Quake scaling should be handled for each quake. The former
  implementation was potentially taking flags from one quake and applying
  them to another, which is broken.
- Remove all the int<->float conversions.
2015-02-20 19:36:13 -06:00
MajorCooke
fb9231a38d - Added QF_FULLINTENSITY.
- When using both scaling flags, by default, the effect only reaches half peak going either way. This forces it to go all the way to the top (or bottom if using QF_MAX) before scaling back to its original height..
2015-02-20 11:06:41 -06:00
MajorCooke
140a650442 - Added QF_SCALEUP and QF_MAX.
- QF_SCALEUP behaves like QF_SCALEDOWN: it gradually scales the tremors, only going upwards.
- QF_SCALEUP and QF_SCALEDOWN can be combined to make an earthquake that gradually smoothes in and out.
- QF_MAX can be used to invert this behavior, where it starts at the peak of the amplitude, fades out half way, and then grows back to maximum.
2015-02-20 10:46:37 -06:00
Christoph Oelckers
3019f2cc23 - fixed savegame code for quakes. 2015-02-20 16:50:03 +01:00
MajorCooke
49d9482363 - Cleaned out of the code and converted it to taking a struct instead.
- This will make it much easier on me to add future changes. Big thanks to Graf for the idea.
2015-02-20 08:26:45 -06:00
MajorCooke
3bf24204d8 - Ensure save games don't break. 2015-02-20 01:41:59 -06:00
MajorCooke
9c5d90e4cb - Removed QF_SCALEUP until I can figure out a proper way to implement it. 2015-02-20 01:33:30 -06:00
MajorCooke
0948b95e08 - Changed QuakePower to take doubles on everything but intensity. This lets the camera shake until it truly reaches 0 as the limitations of integers were actually cutting it short. 2015-02-19 23:19:24 -06:00
MajorCooke
045ab9fd5b Initial groundwork for QF_SCALEDOWN. 2015-02-19 21:42:32 -06:00
MajorCooke
284fd3e20f - Fixed: relz was never initialized.
- This could cause problems in places like the GZDoom renderer in the odd circumstance, causing the camera to become stuck in the floor or ceiling until the quake expires.
2015-02-19 16:30:00 -06:00
Randy Heit
e377c2c4f8 Change XYZ Quaking from Major Cooke
- Relative quakes are different from other quakes; all quakes affecting
  the camera do not become relative if one of them is relative.
- Use a single function call to get quake visual parameters instead of four.
- Thrust things in a psuedo-ellipse if they're inside a damaging quake whose
  IntensityX != IntensityY.
- Don't break old savegames.
2015-02-18 14:48:52 -06:00
MajorCooke
7050d03222 Added A_QuakeEx(intensity x, y, z, duration, damrad, tremrad, sound, flags)
- Unlocks the full potential of using quakes, including the Z axis. Each intensity applies to X/Y/Z planes whenever a player is experiencing it.
- Flags:
- QF_RELATIVE - Adjusts the quaking of the camera to go in the direction its aiming (X: forward/backward. Y: Left/right.)
- Plans for including pitch will be implemented in the future for the Z axis with relativity.
2015-02-14 15:58:39 -06:00
Christoph Oelckers
163301dcd5 - took all includes of farchive.h out of headers. This file will have to be included explicitly in each source file that needs it.
SVN r3259 (trunk)
2011-07-06 14:20:54 +00:00
Christoph Oelckers
0715b7dfc6 - cleaned up switch code and fixed several problems:
* savegames stored an index in the switch table and performed no validation when loading a savegame.
  * setting of a random switch animation duration was broken.
  * separated the 2 values stored in the Time variable into 2 separate variables.
  * defining a switch with one texture already belonging to another switch could leave broken definitions in the switch table.
- added function for serializing switch and door animation pointers.
- bumped min. savegame versions due to changes to DButtonThinker and removed all current savegame compatibility code.


SVN r3030 (trunk)
2010-12-12 15:43:35 +00:00
Christoph Oelckers
efd3e7f94e - added better earthquake functions for ACS and DECORATE.
SVN r1912 (trunk)
2009-10-15 08:25:07 +00:00
Randy Heit
9e42cdaf08 - Replaced the naive area sound implementation with one that takes into
consideration the size and shape of the sector producing the sound. See
  the lifts on Doom 2 MAP30 and compare with previous versions.
- Fixed: The stop sound for sector-based sound sequences was not played with
  the CHAN_AREA flag.
- Removed the distinction between S_Sound() and S_SoundID() functions. Use
  S_Sound() for both names and IDs from now on.


SVN r1034 (trunk)
2008-06-15 02:25:09 +00:00
Randy Heit
eb1e17db06 - Fixed: The music stream needs to zero the FMOD_REVERB_CHANNELPROPERTIES
before sending it to Channel::getReverbProperties().
- Fixed: The earthquake effect did not play its sound as an actual looping
  sound. I'm a bit surprised this only recently started causing problems.


SVN r923 (trunk)
2008-04-18 03:26:48 +00:00
Christoph Oelckers
8ca5f3821d - Changed earthquake code to not add all the intensities but use the maximum
in DEarthQuake::StaticGetQuakeIntensity. The reason for this: Quakes were
  never supposed to be additive. Many maps, including Hexen's own have placed
  quake spots so that they cover a larger area but the areas covered by the
  single spots overlap. On such maps the view will shake like crazy and
  render the map nearly unplayable.


SVN r480 (trunk)
2007-02-10 21:22:31 +00:00
Christoph Oelckers
2b6203f950 - Replaced several calls to S_GetSoundPlayingInfo with S_IsActorPlayingSomething
because S_GetSoundPlayingInfo cannot properly resolve player and random sounds.
- Fixed: S_IsActorPlayingSomething has to resolve aliases and player sounds.
- Took S_ParseSndSeq call out of S_Init. This doesn't work when parsing SNDINFO
  in D_DoomMain.
- Moved SNDINFO reading back to its old place after MAPINFO. This is necessary
  for Hexen's music definitions.


SVN r425 (trunk)
2006-12-24 23:08:49 +00:00
Christoph Oelckers
063c85b157 - Fixed: The global WeaponSection string was never freed. It has been replaced
with an FString now.
- Fixed: The music strings in the default level info were never freed and
  caused memory leaks when used repeatedly.
- Fixed: The intermusic string in the level info was never freed.
- Fixed: The default fire obituary should only be printed if the damage
  came from the environment. If it comes from a monster the monster specific
  obituary should be used instead.
- Added custom damage types from the floating point test release.
- Changed Pain Elemental's massacre check. Now A_PainDie checks for the damage 
  type and doesn't spawn anything if it is NAME_Massacre. A_PainDie can also 
  be used by other actors so a more generalized approach is needed than hard
  coding it into the Pain Elemental.
- Converted a few of Doom's monsters to DECORATE because I couldn't test the
  first version of the custom state code with the corpses inheriting from them.
- Added custom states from last year's floating point test release and fixed
  some bugs I found in that code. Unfortunately it wasn't all salvageable
  and it was easier to recreate some parts from scratch.



SVN r368 (trunk)
2006-10-31 14:53:21 +00:00
Christoph Oelckers
d6bc07c3b1 - Fixed: Starting a game without skill menu always started the first episode.
- Changed A_AlertMonsters so that it can be placed directly in a weapon state.
- Fixed: Frozen corpses of stealth monsters were invisible.
- Added: Calling Radius_Quake with a tid of 0 now uses the activator
  as the quake's center.


SVN r275 (trunk)
2006-07-30 08:31:26 +00:00
Christoph Oelckers
133a035c76 - Fixed: The earthquake code needs to check whether a quake's spot is still valid.
Super Sonic Doom crashed due to this.
- Fixed: G_DoAutosave could divide by 0 if autosavecount was 0.


SVN r243 (trunk)
2006-07-11 00:20:45 +00:00
Randy Heit
0398ddcc76 - Changed the earthquake view shaking so that it works for anything and not
just players.


SVN r235 (trunk)
2006-07-01 00:21:36 +00:00
Randy Heit
cf11cbdb30 Directory restructuring to make it easier to version projects that don't build zdoom.exe.
SVN r4 (trunk)
2006-02-24 04:48:15 +00:00