the rest of the game is concerned, these sounds will never stop once they
have been started until they are explicitly stopped. If they are evicted
from their channels, the sound code will restart them as soon as possible.
This means that instead of this:
if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1))
{
S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM);
}
The following is now just as effective:
S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM);
There are also a couple of other ramifications presented by this change:
* The full state of the sound system (sans music) is now stored in save
games. Any sounds that were playing when you saved will still be
playing when you load. (Try saving while Korax is making a speech in
Hexen to hear it.)
* Using snd_reset will also preserve any playing sounds.
* Movie playback is disabled, probably forever. I did not want to
update the MovieDisable/ResumeSound stuff for the new eviction
tracking code. A properly updated movie player will use the VMR,
which doesn't need these functions, since it would pipe the sound
straight through the sound system like everything else, so I decided
to dump them now, which leaves the movie player in a totally unworkable
state.
June 26, 2008
- Changed S_Sound() to take the same floating point attenuation that the
internal S_StartSound() uses. Now ambient sounds can use the public
S_Sound() interface.
- Fixed: S_RelinkSound() compared the points of the channels against the
from actor's point, rather than checking the channels' mover.
- Changed Strife's animated doors so that their sounds originate from the
interior of the sector making them and not from the entire vertical height
of the map.
SVN r1055 (trunk)
that animated icons can be done with it.
- Changed FImageCollection to use a TArray to hold its data.
- Fixed: SetChanHeadSettings did an assignment instead of comparing
the channel ID witg CHAN_CEILING.
- Changed sound sequence names for animated doors to FNames.
- Automatically fixed: DCeiling didn't properly serialize its texture id.
- Replaced integers as texture ID representation with a specific new type
to track down all potentially incorrect uses and remaining WORDs used
for texture IDs so that more than 32767 or 65535 textures can be defined.
SVN r1036 (trunk)
consideration the size and shape of the sector producing the sound. See
the lifts on Doom 2 MAP30 and compare with previous versions.
- Fixed: The stop sound for sector-based sound sequences was not played with
the CHAN_AREA flag.
- Removed the distinction between S_Sound() and S_SoundID() functions. Use
S_Sound() for both names and IDs from now on.
SVN r1034 (trunk)
were doing some things in their destructor that needed to be done in the
Destroy method.
- Rewrote the interpolation code. Interpolations are no longer some objects
that are separate from the rest of the engine. Instead, they are owned by
the thinkers starting them. Also, polyobjects only spawn a single interpolation
for each polyobject instead of a single one for each vertex.
Also, different types of interpolation objects are used for different types
of interpolation so that they can do some additional work if eventually needed.
SVN r1018 (trunk)
of all types on the same linedef. Also added a 'first side only' flag. This
is not usable from Hexen or Doom format maps though but in preparation of
the UDMF format discussed here:
http://www.doomworld.com/vb/source-ports/43145-udmf-v0-99-specification-draft-aka-textmap/
- Changed linedef's alpha property from a byte to fixed point after seeing that
255 wasn't handled to be fully opaque.
- fixed a GCC warning in fmodsound.cpp
SVN r954 (trunk)
xlat_parser.y because both files had the same time stamp after an update,
and Lemon only rewrites the header file if it's changed.
- Added $volume SNDINFO command. This is multiplied with the volume the sound
is played at to arrive at the final volume (before distance attenuation).
- Added the CHAN_AREA flag to disable 3D panning within the min distance of a
sound. Sector sound sequences (except doors) use this flag.
- Added the CHAN_LOOP flag to replace the S_Looped* sound functions.
- Restored the sound limiting.
SVN r849 (trunk)
Since it uses fixed point parameters it can only be used in scripts though.
- Added flags parameters to all wall scroller specials that didn't use
all 5 args.
- Separated scrolling of the 3 different texture parts of a sidedef.
While doing this I did some more restructuring of the sidedef structure
and changed it so that all state changes to sidedefs that affect rendering
have to be made with access functions. This is not of much use to the
software renderer but it allows far easier caching of rendering data
for OpenGL because the only place I need to check is in the access functions.
SVN r832 (trunk)
which crushing mode is used: 0 uses the game's default for compatibility,
1 uses Doom's mode (crushers continue to move while damaging any actors ) and
2 uses Hexen's mode (crushers stay at blocking actor's top until they die).
Since Generic_Crusher already used all 5 args I created a second version for
Hexen crushing mode.
- Added PICKUP flag to DECORATE.
SVN r817 (trunk)
to be able to save the 3dMidtex attachment info.
- Fixed: The TArray serializer needs to be declared as a friend of TArray
in order to be able to access its fields.
- Since there are no backwards compatibility issues due to savegame version
bumping I closed all gaps in the level flag set.
- Bumped min. Savegame version and Netgame version for 3dMidtex related
changes.
- Changed Jump and Crouch DMFlags into 3-way switches:
0: map default, 1: off, 2: on. Since I needed new bits the rest of
the DMFlag bit values had to be changed as a result.
- fixed: PTR_SlideTraverse didn't check ML_BLOCKMONSTERS for sliding
actors without MF3_NOBLOCKMONST.
- Added MAPINFO commands 'checkswitchrange' and 'nocheckswitchrange'
that can enable or disable switch range checking globally per map.
- Changed ML_3DMIDTEX to force ML_CHECKSWITCHRANGE.
- Added a ML_CHECKSWITCHRANGE flag which allows checking whether the
player can actually reach the switch he wants to use.
- Made DActiveButton::EWhere global so that I can use it outside thr
DActiveButton class.
March 17, 2008 (Changes by Graf Zahl)
- Changed P_LineOpening to pass its result in a struct instead of global
variables.
- Added Eternity's 3DMIDTEX feature (no Eternity code used though.)
It should be feature complete with the exception of the ML_BLOCKMONSTERS
flag handling. That particular part of Eternity's implementation is
sub-optimal because it hijacks an existing flag and doesn't seem to make
much sense to me. Maybe I'll implement it as a separate flag later.
SVN r810 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
I got rid of the old tx and ty CVARs because they made the texture scaling
much more complicated than it was actually needed (and besides, they were completely
useless except for testing purposes anyway.)
SVN r522 (trunk)
dialogs.
- Added Thing_Raise special that allows Arch-Vile like resurrections from scripts
or DECORATE states.
- Added a RadiusDamageFactor property for actors. This replaces the hard coded
factor of 0.25 for Hexen's players.
- Added new SpawnProjectile function to ACS. It's the same as Thing_Projectile2
but the projectile is specified by name, not spawn ID.
- Added MAPINFO option to set the compatibility flags. If this is done these
explicit settings will take precedence over the compatflags CVAR.
SVN r164 (trunk)
- Fixed: The animated door parser was still leaking memory when it encountered
an invalid animation due to missing textures.
- Fixed: The music volume list wasn't freed.
- Fixed: The image for WADs that were loaded from inside Zips was never freed.
SVN r92 (trunk)
- Fixed: Names in terrain definitions were never freed. Replacing them with
FNames would have been a good idea anyway.
- Fixed: The lock definitions were never freed.
- Fixed: FDoorAnimation was missing a destructor.
- Fixed: animation and switch definitions were never freed.
- Replaced all other places where FindType was used with FNames with
IFindType.
SVN r90 (trunk)
- Added multiple-choice sound sequences. These overcome one of the major
deficiences of the Hexen-inherited SNDSEQ system while still being Hexen
compatible: Custom door sounds can now use different opening and closing
sequences, for both normal and blazing speeds.
- Added a serializer for TArray.
- Added a countof macro to doomtype.h. See the1's blog to find out why
it's implemented the way it is.
<http://blogs.msdn.com/the1/articles/210011.aspx>
- Added a new method to FRandom for getting random numbers larger than 255,
which lets me:
- Fixed: SNDSEQ delayrand commands could delay for no more than 255 tics.
- Fixed: If you're going to have sector_t.SoundTarget, then they need to
be included in the pointer cleanup scans.
- Ported back newer name code from 2.1.
- Fixed: Using -warp with only one parameter in Doom and Heretic to
select a map on episode 1 no longer worked.
- New: Loading a multiplayer save now restores the players based on
their names rather than on their connection order. Using connection
order was sensible when -net was the only way to start a network game,
but with -host/-join, it's not so nice. Also, if there aren't enough
players in the save, then the extra players will be spawned normally,
so you can continue a saved game with more players than you started it
with.
- Added some new SNDSEQ commands to make it possible to define Heretic's
ambient sounds in SNDSEQ: volumerel, volumerand, slot, randomsequence,
delayonce, and restart. With these, it is basically possible to obsolete
all of the $ambient SNDINFO commands.
- Fixed: Sound sequences would only execute one command each time they were
ticked.
- Fixed: No bounds checking was done on the volume sound sequences played at.
- Fixed: The tic parameter to playloop was useless and caused it to
act like a redundant playrepeat. I have removed all the logic that
caused playloop to play repeating sounds, and now it acts like an
infinite sequence of play/delay commands until the sequence is
stopped.
- Fixed: Sound sequences were ticked every frame, not every tic, so all
the delay commands were timed incorrectly and varied depending on your
framerate. Since this is useful for restarting looping sounds that got
cut off, I have not changed this. Instead, the delay commands now
record the tic when execution should resume, not the number of tics
left to delay.
SVN r57 (trunk)
