- instead add a list of SpecialInits to VMScriptFunction so this can be done transparently when setting up and popping the stack frame. The only drawback is that this requires permanent allocation of stack objects for the entire lifetime of a function but this is a relatively small tradeoff for significantly reduced maintenance work throughout.
- removed most #include "vm.h", because nearly all files already pull this in through dobject.h.
This could cause problems with functions that take states as parameters but use them to set them internally instead of passing them through the A_Jump interface back to the caller, like A_Chase or A_LookEx.
This required some quite significant refactoring because the entire state resolution logic had been baked into the compiler which turned out to be a major maintenance problem.
Fixed this by adding a new builtin type 'statelabel'. This is an opaque identifier representing a state, with the actual data either directly encoded into the number for single label state or an index into a state information table.
The state resolution is now the task of the called function as it should always have remained. Note, that this required giving back the 'action' qualifier to most state jumping functions.
- refactored most A_Jump checkers to a two stage setup with a pure checker that returns a boolean and a scripted A_Jump wrapper, for some simpler checks the checker function was entirely omitted and calculated inline in the A_Jump function. It is strongly recommended to use the boolean checkers unless using an inline function invocation in a state as they lead to vastly clearer code and offer more flexibility.
- let Min() and Max() use the OP_MIN and OP_MAX opcodes. Although these were present, these function were implemented using some grossly inefficient branching tests.
- the DECORATE 'state' cast kludge will now actually call ResolveState because a state label is not a state and needs conversion.
- fixed creation of direct function invocations on a state line. In order to receive the implicit arguments this needs to be wrapped into a compound statement so that the local variable getter works.
The proper setup for such classes was only done in CreateDerivedClass, but not in FindClassTentative itself. This extends CreateDerivedClass to allow it to create a class without fully initializing it.
Syntax-wise I chose to make it as strict as possible to reduce the chance of errors: Virtual base functions must be declared with the 'virtual' keyword, and overrides in child classes with the 'override' keyword. This way any mismatch in parameters that otherwise would cause silent failure will outright produce a compile error.
- made 'DamageMultiply' an actor property and moved the initialization of ConversationRoot to the property handler for the compiler to get this stuff out of the type classes.
- consolidate default initialization into one function which performs all the required setup. The original implementation did this when adding the fields but that cannot work because at that time no defaults have been created yet.
- fixed: When deriving a class the child class's defaults also must initialize the copied parent fields with special initialization. This part was completely missing.
- removed DECORATE code for parsing native classes because it's no longer needed.
This bypasses a declaration in the script in favor of a simpler implementation. In order to work it is always necessary to have an offset table to map the variables to, but doing it fully on the native side only requires adding the type to the declaration.
- added support for global variables to the code generator - not the compiler, though. For the handful of entries this is needed for it may just as well be done manually. So far FLevelLocals level is the only one being exported.
- fixed: The VM disassembler truncated 64 bit pointers to 15 digits because the output buffer was too small.
- resolve entire FxSequences instead of aborting on the first failed entry. This allows to output all errors at once.
- exported thinker iterator and drop item chain to scripting. Unlike its native counterpart the script-side iterator is wrapped into a DObject to allow proper handling for memory management.
- fixed: The VMFunctionBuilder only distinguished between member and action functions but failed on static ones.
- fixed: FxAssign did not add all needed type casts. Except for purely numeric types it will now wrap the expression in an FxTypeCast. Numeric handling remains unchanged for both performance reasons and not altering semantics for DECORATE.
- exported all internal flags as variables to scripting. They still cannot be used in an actor definition.
- make ATAG_STATE the same as ATAG_GENERIC. Since state pointers exist as actual variables they can take both values which on occasion can trigger some asserts.
- gave PClass a bExported flag, so that scripts cannot see purely internal classes. Especially the types like PInt can cause problems.
Todo: we need readonly references to safely expose the actor defaults. Right now some badly behaving code could overwrite them.
- added initializer syntax for vectors. A vector can be set with vectorvar = (x,y,z); for a 3-dimensional vector and vectorvar = (x, y); for a 2-dimensional one.
- disabled the assert in PType::GetRegType. This assert blocks any use to check for types that are incompatible with function parameters.
- pass the default parameter constants to the native functions. At the moment this is not used yet.
- use the function defaults to complete argument lists to script functions.
- fixed all default values that got flagged by the expression evaluator as non-constant. Most were state labels and colors which were defaulted to "". The proper value is null for states and 0 for colors.
- also replaced all "" defaults for names with "none".
- synthesize PField entries from the flag list for AActor. This intentionally excludes the bounce flags for now.
- allow deprecated flags that do not call the deprecated flag handler.
- disallow constructs like (a = b) = c by not allowing an address request on an assignment operation.
- restrict modify/assign on boolean variables to the bit operators. Everything else needs to promote the result to an integer to make sense so it should be disallowed.
- fixed: FxMemberIdentifier checked for ClassPointers instead of object pointers to resolve the left hand side of the expression.
- allow comparison of pointers.
- create proper variable data from the function prototype instead of assuming that there's just 3 pointers.
- added a printable name to VMScriptFunction for error output during gameplay in case something goes wrong.
- added a descriptive name to all types for error messages.
- added a generic type cast node to the code generator.
- added a few more cast operations to the 'cast' VM instruction.
- extended FxClassTypeCast to handle all possible input that can be cast to a class pointer, not just names.
ZDoom only uses these types in a very few isolated places, and even those can be removed without problems, so it's very doubtful that having support for these types is of any benefit - on the other hand, having them will most likely introduce more code than is saved in the data by using them...
* explicitly require passing the owning class when creating it.
* extract self pointer class when adding a variant.
* put the flags on the single variants, we can not fully rule out that they will be 100% identical, if variants ever get allowed.
* Allow PFunction to work without a VMFunction being attached.
* The Variant for a function must store the prototype itself instead of relying on the VMFunction it points to. Otherwise it would not be possible to reference a prototype during compilation of the function because it does not exist yet.
* Give the variant a list of the function's argument's names, because these are also needed to compile the function.
* create an anonymous function symbol when the function gets registered to the builder. At this point we have all the needed information to set it up correctly, but later this is no longer the case. This is the most convenient info to have here because it contains everything that's needed to compile the function in the proper context, so it has to be present when starting compilation.
* added some preparations to implement special handling for weapons and custom inventory items, which can run action functions in another actor's context. This part is not active yet but the basics are present in SetImplicitArgs.
This uses the same property and flag tables as DECORATE with a few changes:
* it sets the parse mode to strict, so that several DECORATE warnings are now errors.
* trying to change a deprecated flag will print a warning.
* setting of editor numbers, spawn and conversation ID id not possible. Use MAPINFO to do this.
* all subclass flags must use the qualified name now (e.g. +ALWAYSPICKUP will print an error.)
* the scriptable Damage property is not yet implemented. This will require a special case with a differently named property in the processing function because in the AST it is no longer possible to distinguish between a damage value and a constant damage function.
- added checks for duplicate field names.
- moved the tree node symbol tables out of PSymbolTreeNode to the worker data. That symbol is a bad location because it restricts the usefulness of the symbol class which is also needed for variables which use different AST structs.
- fixed some memory management issues with the work classes for the compiler that became apparent after moving the symbol tables in there. In several places these were copied around, possibly losing data.
This uses a different algorithm as the old implementation - instead of recursively resolving unknown symbols it will first collect all constants from all scopes and then process them in one operation, doing multiple passes over the list until no more constants can be resolved anymore.
- fixed class creation. There was an infinite loop and some missing checks for native classes.
- do not write the compiler's symbols to the same symbol table as the output. The output must go to GlobalSymbols but the internal symbols must go to a namespace specific table that can be discarded after compilation.
Instead of replacing the original, the second class will get renamed now, using the originating file as an identifier. In the vast majority of cases this should do exactly what is needed: Create an unconflicting second class that can coexist with the original. Unless the class is used by name this should eliminate all problems with this, but so far I haven't seen anything that used them by name.
This is choosing the lesser of two evils. While some mod out there may get broken, the old setup meant that the first class of a given name could not be written out to a savegame because it was not retrievable when loading it back.
Ultimately we may have to get a fully qualified name out of this, so Outer should be a type that can handle this feature. The new class for this is currently used as base for PType and PSymbol so that PNamedType inherits from it and maybe later a namespace symbol can, too.
After testing with a savegame on ZDCMP2 which is probably the largest map in existence, timing both methods resulted in a speed difference of less than 40 ms (70 vs 110 ms for reading all sectory, linedefs, sidedefs and objects).
This compares to an overall restoration time, including reloading the level, precaching all textures and setting everything up, of approx. 1.2 s, meaning an increase of 3% of the entire reloading time.
That's simply not worth all the negative side effects that may happen with a method that highly depends on proper code construction.
On the other hand, using random access means that a savegame version change is only needed now when the semantics of a field change, but not if some get added or deleted.
- do not I_Error out in the serializer unless caused by a programming error.
It is better to let the serializer finish, collect all the errors and I_Error out when the game is known to be in a stable enough state to allow unwinding.
