This commit is just preparation for upcoming changes to completely encapsulate the coordinate info in AActor because I'm going to have to work with an altered version of actor.h that cannot be committed without breaking the engine.
With this file present in the repo before work is started the changes can be committed piece by piece.
'ceilingterrain' is needed because the top of 3D-floors refers to the model sector's ceiling, so in order to give a 3D floor a terrain it must be assignable to the sector's ceiling.
Note that although it is basically the same property, its actual function bears no relevance to its use in Eternity.
- Added 'threshold' and 'defthreshold' to DECORATE expression exposure.
- ChaseThreshold sets the default threshold for how long a monster must chase one target before it can switch targets. Default is 100, must not be negative.
- A_SetChaseThreshold can be used to alter the current or default threshold of an actor <pointer>.
- Changing current threshold has no effect on what the default will be once it hits 0 and something makes it infight with another.
- This only affects damage calculations being received by the end result. If the original damage was not a million or more, from the start, it will not hurt invulnerable-flagged or kill buddha-flagged monsters.
- Fixed: Damage was inconsistent by the time the function checked for player cheats/invulnerability and (monster and player) buddha, yet monster invulnerability checked the original damage prior to factor processing. This means a damage source that intended to damage another below the threshold could accidentally increase with a powerdamage multiplier or the recipient with a weakness for it, resulting in invulnerability/buddha foiling. Now, checks for telefrag damage using the raw original value on player godmode, player/monster invulnerability and buddha.
Introduce AActor::TakeInventory, which unifies DoTakeInv from ACS and DoTakeInventory from Decorate, and AInventory::DepleteOrDestroy, which is extracted from the DoTakeInv core function, and use both where they're needed.
I don't know if the differences between DoTakeInv and DoTakeInventory were intentional, so I kept both behaviors.
- Rippers will rip through anything with an equivalent ripper level, or if their level is between or on the min and max ranges.
- If no min or max is defined, it simply checks if the monster's ripper level is lower than the missiles.
- Functions: A_SetRipperLevel(int level), A_SetRipMin(int min), A_SetRipMax(int max)
- Properties: RipperLevel, RipLevelMin, and RipLevelMax.
- RipperLevel: Applicable to monsters and projectiles.
- RipLevelMin and RipLevelMax are only useful on monsters.
- By default, all are 0.
Conflicts:
src/CMakeLists.txt
src/b_think.cpp
src/g_doom/a_doomweaps.cpp
src/g_hexen/a_clericstaff.cpp
src/g_hexen/a_fighterplayer.cpp
src/namedef.h
src/p_enemy.cpp
src/p_local.h
src/p_mobj.cpp
src/p_teleport.cpp
src/sc_man_tokens.h
src/thingdef/thingdef_codeptr.cpp
src/thingdef/thingdef_function.cpp
src/thingdef/thingdef_parse.cpp
wadsrc/static/actors/actor.txt
wadsrc/static/actors/constants.txt
wadsrc/static/actors/shared/inventory.txt
- Added register reuse to VMFunctionBuilder for FxPick's code emitter.
- Note to self: Need to reimplement IsPointerEqual and CheckClass, which
were added to thingdef_function.cpp over the past year, as this file no
longer exists in this branch.
- New properties include TeleFogSourceType and TeleFogDestType.
- TeleFogSourceType is the fog left behind where the actor teleported away from.
- TeleFogDestType is the fog the actor sees when it arrives at its destination.
- Added A_SetTeleFog(<oldpos>,<newpos>) -- oldpos sets TeleFogSourceType, newpos sets TeleFogDestType.
- HITTARGET, HITMASTER, and HITTRACER.
- A missile that dies hitting an actor will set this impacted actor as the new target/master/tracer, depending on specifications.
- Added THRUREFLECT, MIRRORREFLECT, and AIMREFLECT. All require REFLECTIVE to work.
- THRUREFLECT prevents missiles from changing course if reflected, and takes precedence over all reflective flags.
- MIRRORREFLECT causes missiles to perform a direct 180 turn-around.
- AIMREFLECT turns the missile back to the original shooter, and does not slow the missile down.
-Fixed: ALLOWPAIN should not trigger pain states if the damage is 0, but still allow for infighting to occur.
-Fixed: an unneeded logic call was processing damage modification when it was 0 to begin with.
Monsters with this flag can enter pain states, regardless of
invulnerability or damage absorption.
- Fixed: god2 cheat wasn't being considered for drowning and thrusting.
Actors will be excluded from damage/radius thrusting of all sorts by
explosions or damage of any kind. They will also never deal impact
damage to other enemies, nor will they damage themselves from being too
close to a wall.
- fixed: Thing_Raise didn't properly set the spawn health.
- fixed: Thing_Raise did not the CanRaise state flag.
- fixed: Reviving a monster must also reset the damage type.
- fixed: Thing_Raise reset the actor after calling the raise state, but it should be before, just as the Archvile code is doing.
- consolidated some common code of Thing_Raise and Archvile resurrection into AActor methods.
- Added CF_INTERPVIEW flag for players. A_SetPitch/A_SetAngle and the
similar ACS APROPs set this when changing an angle. This forces the
renderer to interpolate the view angles instead of updating with the
latest mouse positions. The effect lasts one tick.
- Instead of tying NoDelay behavior to OF_JustSpawned, use a new actor
flag, MF7_HANDLENODELAY. This only gets cleared once it has actually
been checked by Tick(). This is necessary because freeze mode delays the
initial run of Tick() past the initial spawn, so OF_JustSpawned will no
longer be set when it does the initial tick.
- Delay NoDelay processing if an actor is spawned dormant. Actors spawned
dormant have Deactivate() called before they tick, so MF7_HANDLENODELAY
will remain set as long as an actor is dormant. This allows the NoDelay
handling to occur as expected once it is activated.
DECORATE). Then you can use:
* Bounce
* Bounce.Floor
* Bounce.Ceiling
* Bounce.Wall
* Bounce.Actor
* Bounce.Actor.Creature
Partial matches work just like Pain states, so if an actor bounces off a floor and you don't
have a Bounce.Floor state, but you do have a Bounce state, it will use the Bounce state.
Conversely, if you only have a Bounce.Floor state but no Bounce state, then the actor will
only enter the Bounce.Floor state when it bounces on a floor; bouncing off anything else will
not cause it to change state.
SVN r4250 (trunk)
- Changed Actor's Damage property into an actual function. All access to the damage property
must now be done through GetMissileDamage. actor->GetMissileDamage(0, 1) is equivalent
to the former actor->Damage, for the case where actor->Damage was not an expression. (I
suppose I will probably need to make a thunk for DECORATE expressions that want to read it.)
- Cleaned up some decorate expression evaluation functions that are no longer used.
SVN r3919 (scripting)
become ungodly slow when using mods with complex DECORATE. The GCC debug builds run just
fine, however. Hopefully this is something that can be fixed later with an assembly-optimized
version of the main VM loop, because I don't relish the thought of being stuck with GDB
for debugging.)
- Fixed: The ACS_Named* action specials were erroneously defined as taking strings instead of
names.
- Fixed: Copy-paste error caused FxMultiNameState::Emit to generate code that called
DecoNameToClass instead of DecoFindMultiNameState.
- Updated FxActionSpecialCall::Emit for named script specials.
- Fixed inverted asserts for FxMinusSign::Emit and FxUnaryNotBitwise::Emit.
SVN r3893 (scripting)
is more efficient than ThingCount(tid, T_NONE), because it only needs to check for one actor
with the TID and not all of them. It also makes no distinction between dead things and live
things like ThingCount does.
- Added ACS function UniqueTID(tid, limit): It returns a new TID that is not currently used by
any actors. It has two modes of operation. If tid is non-zero, then it checks TIDs one-by-one
starting at the given tid until if finds a free one. If tid is zero, then it returns a completely
random TID. If limit is non-zero, then it will only check that many times for a free TID, so
it might not find a free one. If no free TID is found, 0 is returned. If limit is zero, then
the search is effectively unlimited.
SVN r3798 (trunk)
- fixed: The same rules that are used for deciding if a weapon attack took place should be used when checking the PIERCEARMOR flag in P_LineAttack: It should be ignored if the attack doesn't originate from the weapon.
SVN r3649 (trunk)
- added DECORATE properties for accuracy and stamina.
- Since these changes move properties from player_t to AActor all savegame compatibility code was removed and the min. savegame version bumped.
SVN r3427 (trunk)
