gzdoom-gles/src/v_palette.h

124 lines
4.3 KiB
C
Raw Normal View History

/*
** v_palette.h
**
**---------------------------------------------------------------------------
** Copyright 1998-2006 Randy Heit
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
**
*/
#ifndef __V_PALETTE_H__
#define __V_PALETTE_H__
#include "basictypes.h"
#define MAKERGB(r,g,b) DWORD(((r)<<16)|((g)<<8)|(b))
#define MAKEARGB(a,r,g,b) DWORD(((a)<<24)|((r)<<16)|((g)<<8)|(b))
#define APART(c) (((c)>>24)&0xff)
#define RPART(c) (((c)>>16)&0xff)
#define GPART(c) (((c)>>8)&0xff)
#define BPART(c) ((c)&0xff)
struct FPalette
{
FPalette ();
FPalette (const BYTE *colors);
void SetPalette (const BYTE *colors);
void MakeGoodRemap ();
PalEntry BaseColors[256]; // non-gamma corrected palette
BYTE Remap[256]; // remap original palette indices to in-game indices
BYTE WhiteIndex; // white in original palette index
BYTE BlackIndex; // black in original palette index
// Given an array of colors, fills in remap with values to remap the
// passed array of colors to this palette.
void MakeRemap (const DWORD *colors, BYTE *remap, const BYTE *useful, int numcolors) const;
};
struct FDynamicColormap
{
void ChangeFade (PalEntry fadecolor);
void ChangeColor (PalEntry lightcolor, int desaturate);
void ChangeColorFade (PalEntry lightcolor, PalEntry fadecolor);
void BuildLights ();
static void RebuildAllLights();
BYTE *Maps;
PalEntry Color;
PalEntry Fade;
int Desaturate;
FDynamicColormap *Next;
};
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
extern BYTE InverseColormap[256];
extern BYTE GoldColormap[256];
// [BC] New Skulltag colormaps.
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
extern BYTE RedColormap[256];
extern BYTE GreenColormap[256];
extern BYTE DesaturateColormap[31][256];
extern FPalette GPalette;
extern "C" {
extern FDynamicColormap NormalLight;
}
- Discovered that Shader Model 1.4 clamps my constants, so I can't use palettes smaller than 256 entries with the shader I wrote for it. Is there a list of gotchas like this listed some where? I'd really like to see it. Well, when compiled with SM2.0, the PalTex shader seems to be every-so- slightly faster on my GF7950GT than the SM1.4 version, so I guess it's a minor win for cards that support it. - Fixed: ST_Endoom() failed to free the bitmap it used. - Added the DTA_ColorOverlay attribute to blend a color with the texture being drawn. For software, this (currently) only works with black. For hardware, it works with any color. The motiviation for this was so I could rewrite the status bar calls that passed DIM_MAP to DTA_Translation to draw darker icons into something that didn't require making a whole new remap table. - After having an "OMG! How could I have been so stupid?" moment, I have removed the off-by-one check from D3DFB. I had thought the off-by-one error was caused by rounding errors by the shader hardware. Not so. Rather, I wasn't sampling what I thought I was sampling. A texture that uses palette index 255 passes the value 1.0 to the shader. The shader needs to adjust the range of its palette indexes, or it will end up trying to read color 256 from the palette texture when it should be reading color 255. Doh! - The TranslationToTable() function has been added to map from translation numbers used by actors to the tables those numbers represent. This function performs validation for the input and returns NULL if the input value is invalid. - Major changes to the way translation tables work: No longer are they each a 256-byte array. Instead, the FRemapTable structure is used to represent each one. It includes a remap array for the software renderer, a palette array for a hardware renderer, and a native texture pointer for D3DFB. The translationtables array itself is now an array of TArrays that point to the real tables. The DTA_Translation attribute must also be passed a pointer to a FRemapTable, not a byte array as previously. - Modified DFrameBuffer::DrawRateStuff() so that it can do its thing properly for D3DFB's 2D mode. Before, any fullscreen graphics (like help images) covered it up. SVN r640 (trunk)
2007-12-26 04:42:15 +00:00
// The color overlay to use for depleted items
#define DIM_OVERLAY MAKEARGB(170,0,0,0)
int BestColor (const uint32 *pal, int r, int g, int b, int first=1, int num=255);
void InitPalette ();
// V_SetBlend()
// input: blendr: red component of blend
// blendg: green component of blend
// blendb: blue component of blend
// blenda: alpha component of blend
//
// Applies the blend to all palettes with PALETTEF_BLEND flag
void V_SetBlend (int blendr, int blendg, int blendb, int blenda);
// V_ForceBlend()
//
// Normally, V_SetBlend() does nothing if the new blend is the
// same as the old. This function will performing the blending
// even if the blend hasn't changed.
void V_ForceBlend (int blendr, int blendg, int blendb, int blenda);
// Colorspace conversion RGB <-> HSV
void RGBtoHSV (float r, float g, float b, float *h, float *s, float *v);
void HSVtoRGB (float *r, float *g, float *b, float h, float s, float v);
FDynamicColormap *GetSpecialLights (PalEntry lightcolor, PalEntry fadecolor, int desaturate);
#endif //__V_PALETTE_H__