Commit graph

383 commits

Author SHA1 Message Date
terminx
f368bc1a03 Silence FBO initialization failure message on Intel HD 4000 by moving the glCheckFramebufferStatusEXT() call to below the glBindFramebufferEXT() call. The error returned on HD 4000 previously was something to do with the framebuffer being incomplete, and this seems to fix it, so hopefully it's right.
git-svn-id: https://svn.eduke32.com/eduke32@3985 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-06 23:52:16 +00:00
helixhorned
57822a2481 Polymer: slightly more complete handling of (multi-tile) ART skies.
- Use the proper tile sequence when multiple pskies are present in a map.
  However, there's still only *one* psky chosen at map load time.
- Handle three horizfrac cases:
 * 0, psky always at same level wrt screen
 * 65536, psky horiz follows camera horiz (e.g. E4L9)
 * otherwise, fall back to default hard-coded parallax implemented as an
   angle fraction

git-svn-id: https://svn.eduke32.com/eduke32@3977 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-04 20:37:49 +00:00
helixhorned
a374a401be Clean up parallaxed sky functionality, part 2.
- Rename sky_t members: yscale -> horizfrac, bits -> lognumtiles.
- Add default sky (8 tiles, horizfrac=32768 (i.e. 1/2 the scene horiz), offsets
  all zero) and CLOUDYOCEAN sky (8 tiles, horizfrac=65536, offsets all zero)
  to multipsky[].
- Get rid of "psky_t g_psky", merely maintaining a g_pskyidx instead. Set it up
  at map load time so as to keep the behavior of the legacy per-map psky:
  the last sector index with a matching psky ceiling wins.
- In mapstate_t, save g_pskyidx too, not (former) pskybits and pskyoffs[].
- Make on-map-load global psky setup consistent for the game and editor by
  factoring it out into common.c: G_SetupGlobalPsky().
- Remove a couple of useless initializations, add some static assertions.

This commit is more likely to introduce subtle differences in behavior.
Specifically, getpsky() now always returns the default sky properties instead of
the global sky ones (but with all-zero offsets) when no match for a suiting
multi-psky is found. This is only likely to affect the yscale/horizfrac of
non-multi-pskies when a global non-default multi-psky has been set up.
Bump BYTEVERSION again.

git-svn-id: https://svn.eduke32.com/eduke32@3976 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-04 20:37:48 +00:00
helixhorned
46e8549b5e Clean up parallaxed sky functionality, part 1.
- Consolidate psky* arrays into a "typedef struct psky_t" "g_psky" and
  "multipsky[]".
- Factor out getting parallaxed sky properties into getpsky().
- Condense initial multi-psky setup by memcpy'ing from multipsky[].
- New function: MultiPsky_TileToIdx().
- Add new define PSKYOFF_MAX and related consistency-checking assertions.
- Lower MAXPSKYTILES to 8 to reflect current usage (was 256).
- Game: make multi-pskies consider dynamically-remapped MOONSKY1, BIGORBIT1
  and LA. (Not very useful as the editor will still only act for the static
  values -- 80, 84 and 89, respectively.)

An attempt has been made to preserve behavior even in strange cases, so this
commit is unlikely to introduce regressions. Because of point 6, BYTEVERSION
had to be bumped.

git-svn-id: https://svn.eduke32.com/eduke32@3975 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-04 20:37:45 +00:00
helixhorned
2945a966e1 Polymer/ART mapping: fix formula for globalvisibility.
Also, very slightly tweak a factor toward a "brighter" (farther visible)
scene overall to account for the "circular" nature of the fragment distance
(as opposed to an "ortho" distance in Build).

git-svn-id: https://svn.eduke32.com/eduke32@3962 1a8010ca-5511-0410-912e-c29ae57300e0
2013-07-18 18:08:15 +00:00
helixhorned
184a7322de Polymodes/Lunatic: don't do y panning "correction" for nonpow2 ysize tiles.
git-svn-id: https://svn.eduke32.com/eduke32@3926 1a8010ca-5511-0410-912e-c29ae57300e0
2013-07-04 19:38:37 +00:00
helixhorned
d25dcbff17 Polymer: Fix one-sided y-flipped floor-aligned sprites, introduced in r3776.
Add a test case in test_tileoffsets.map.

git-svn-id: https://svn.eduke32.com/eduke32@3869 1a8010ca-5511-0410-912e-c29ae57300e0
2013-06-11 20:03:39 +00:00
helixhorned
43520eba5b Polymer: fix possible NULL pointer dereference in polymer_getbuildmaterial().
git-svn-id: https://svn.eduke32.com/eduke32@3799 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-22 16:23:14 +00:00
terminx
f8cc394fa3 Sanitize hard coded render mode numbers... replace all references to rendmode 0, 3, 4, etc with proper REND_CLASSIC, REND_POLYMOST, REND_POLYMER labels.
git-svn-id: https://svn.eduke32.com/eduke32@3784 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-17 03:44:09 +00:00
helixhorned
6e364b1f4b Polymer: fix centering of y-flipped wall sprites. (Case D in test_tileoffsets.)
git-svn-id: https://svn.eduke32.com/eduke32@3779 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-16 21:54:58 +00:00
helixhorned
946d207c56 Polymodes: make flipping closer to classic.
This fixes cases A and B in test_tileoffsets.map.

git-svn-id: https://svn.eduke32.com/eduke32@3778 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-16 21:54:56 +00:00
helixhorned
91523f60b1 Polymer: fix floor sprites with y flipping by removing special-case code.
This fixes the case marked with the silver letter C in test_tileoffsets.map.
The orientation of the sprites is correct (matches classic) as far as I can
see, there are now only problems with translation.

git-svn-id: https://svn.eduke32.com/eduke32@3776 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-16 21:54:53 +00:00
helixhorned
99d7f1e964 Polymer: rewrite sprite x/y flipping so that data flow is explicit.
Also, add some defines for sprite cstats to build.h (SPR_*) and use them.

git-svn-id: https://svn.eduke32.com/eduke32@3775 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-16 21:54:52 +00:00
terminx
6cc4cfbf8a Promote pr_customaspect to double from float to match the array of predefined aspect ratios that's in the menu
git-svn-id: https://svn.eduke32.com/eduke32@3769 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-15 14:53:54 +00:00
terminx
20e5bfd821 A bit more work on the Polymost shade table mode (r_usetileshades)
git-svn-id: https://svn.eduke32.com/eduke32@3763 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-15 02:19:14 +00:00
terminx
5a4e7b651b Add an experimental shading mode to Polymost for .art tiles, in which extra textures are allocated for each shade level based on the classic mode shade tables. Enable with r_usetileshades 1 (disabled by default). This uses a lot of memory and is still very WIP (a lot of the shading is completely wrong at this point).
Also, further refactor texcache code.

git-svn-id: https://svn.eduke32.com/eduke32@3761 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-15 02:18:27 +00:00
terminx
08444cb825 WIP texture cache refactoring
git-svn-id: https://svn.eduke32.com/eduke32@3758 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-15 02:17:17 +00:00
Plagman
e627f09787 Ignore ART mapping for TILE_ANIM, which is dynamically populated by the game
during ANM playback.

git-svn-id: https://svn.eduke32.com/eduke32@3742 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-09 07:22:40 +00:00
Plagman
c32401ba51 Polymer: Hook ART mapping to rotatesprite.
The visibility calculation relies on the distance, which might not be entirely
accurate in rotatesprite, so maybe it'll be too dark in some cases.

git-svn-id: https://svn.eduke32.com/eduke32@3741 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-08 06:53:38 +00:00
Plagman
ce76b5a3b8 Polymer: Make ART mapping work with any number of shade offsets (eg. BLOOD pal)
git-svn-id: https://svn.eduke32.com/eduke32@3740 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-08 06:18:31 +00:00
Plagman
3d65b36ebe Revert to spherical shading; it's not like you could look up in classic anyway.
git-svn-id: https://svn.eduke32.com/eduke32@3739 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-08 05:03:36 +00:00
Plagman
6128911c8c Fix interaction between ART mapping and lighting.
git-svn-id: https://svn.eduke32.com/eduke32@3738 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-08 05:03:29 +00:00
Plagman
cd1b147dd3 Finish Polymer cancer mode and enable by default.
TODO: figure out wtf is wrong with rotatesprite, linear filtering.

git-svn-id: https://svn.eduke32.com/eduke32@3737 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-07 07:48:08 +00:00
terminx
5b672a19e3 MSVC build fix
git-svn-id: https://svn.eduke32.com/eduke32@3730 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-06 18:46:34 +00:00
Plagman
6dac6ac1c0 New Polymer feature: shitty mode.
git-svn-id: https://svn.eduke32.com/eduke32@3729 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-06 03:12:38 +00:00
helixhorned
9f313043bf Fix model HUD weapons not showing in Polymer, introduced in r3717.
git-svn-id: https://svn.eduke32.com/eduke32@3722 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-01 17:42:07 +00:00
helixhorned
bc78ff27ed Classic: clean up mirror drawing code.
No functional changes, but a (commented out) debug line for an oob read of the
frame buffer when the mirror covers the whole screen is inserted.

git-svn-id: https://svn.eduke32.com/eduke32@3719 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-01 17:41:59 +00:00
helixhorned
74aaac70d2 Fix two bugs found by Clang's undefined behavior sanitizer.
- Return early from drawsprite_classic() if tspr->owner if oob.
  Commonize that check between renderers into bad_tspr().
- Make the BIT() macro a left-shift of the *unsigned* number 1,
  preventing expansion to (1<<31).

git-svn-id: https://svn.eduke32.com/eduke32@3717 1a8010ca-5511-0410-912e-c29ae57300e0
2013-04-29 19:24:19 +00:00
helixhorned
7b6bf4dda2 Lunatic: new-generation map format, in-memory representation ("map-int VX").
The Lunatic build compiles with new structures for sector and wall types.
They have separate members for TROR {up,down}{bunch,nextwall}, so there are
no conflicts with other uses of members into which they were previously
shoehorned.  Also, the maximum bunch limit is bumped to 512 in that build.

Currently, loading from V7/8/9 and saving to V7 and V8 are supported.

git-svn-id: https://svn.eduke32.com/eduke32@3658 1a8010ca-5511-0410-912e-c29ae57300e0
2013-04-09 17:35:11 +00:00
Plagman
0abef3b8cd Polymer: Fix ART offset and sprite flipping interaction.
git-svn-id: https://svn.eduke32.com/eduke32@3633 1a8010ca-5511-0410-912e-c29ae57300e0
2013-03-31 23:26:40 +00:00
helixhorned
182121a0aa engine: give sprite cstat 1024 a marco name, CSTAT_SPRITE_MDHACK.
git-svn-id: https://svn.eduke32.com/eduke32@3584 1a8010ca-5511-0410-912e-c29ae57300e0
2013-03-21 10:19:32 +00:00
hendricks266
b46d4460bc Process ART animations on tspr->picnum early in all three renderers.
This enables ART animations to take effect on voxels in classic, voxels and models in Polymost, and models in Polymer.

git-svn-id: https://svn.eduke32.com/eduke32@3580 1a8010ca-5511-0410-912e-c29ae57300e0
2013-03-19 06:23:38 +00:00
helixhorned
05c920cf92 engine/Polymer: factor out setting {cos,sin}*globalang into set_globalang().
git-svn-id: https://svn.eduke32.com/eduke32@3471 1a8010ca-5511-0410-912e-c29ae57300e0
2013-02-10 16:24:11 +00:00
helixhorned
05161ea4d8 Re-enable spotlights on ATI cards again because the crash from 12.8 seems gone.
git-svn-id: https://svn.eduke32.com/eduke32@3381 1a8010ca-5511-0410-912e-c29ae57300e0
2013-01-06 18:56:50 +00:00
helixhorned
55283e5ce6 In Polymost, make r_usenewaspect=2 fog independent of screen x size.
git-svn-id: https://svn.eduke32.com/eduke32@3307 1a8010ca-5511-0410-912e-c29ae57300e0
2012-12-20 12:04:34 +00:00
helixhorned
922aa3ca8b Classic-like visibility/fog for OpenGL modes, r_usenewshading 2 (new default).
Implemented using GL_LINEAR fog. The only source of difference (besides the
obvious indexed vs. true color) should now be the distance constant, which
still had to be determined experimentally.  Polymer implements this mode in
its fog fragment program part.

Parallaxed skies are always drawn with full visibility, I'm not sure if there
are any maps that expect otherwise.

Also, accidentally committed: factor out initialization code from
polymost_printext256() into gen_font_glyph_tex(), small game.c changes.

git-svn-id: https://svn.eduke32.com/eduke32@3301 1a8010ca-5511-0410-912e-c29ae57300e0
2012-12-16 19:18:10 +00:00
helixhorned
4cc5c431ae Factor out fogcalc() issuing and application of the computed values.
git-svn-id: https://svn.eduke32.com/eduke32@3288 1a8010ca-5511-0410-912e-c29ae57300e0
2012-12-14 19:28:09 +00:00
helixhorned
884302bea1 OpenGL modes: factor out shade factor calculation.
This also means that the "r_shadescale_unbounded 0" option will work
in Polymer (except on models).

git-svn-id: https://svn.eduke32.com/eduke32@3286 1a8010ca-5511-0410-912e-c29ae57300e0
2012-12-14 19:28:01 +00:00
hendricks266
890aba88eb Fix warnings involving printf() requiring explicit casts on tracked types.
git-svn-id: https://svn.eduke32.com/eduke32@3238 1a8010ca-5511-0410-912e-c29ae57300e0
2012-11-26 08:26:04 +00:00
helixhorned
44904b12be Clean up picanm[] by making its elements values of struct type picanm_t.
The size of that struct is currently 4, and its layout almost the same as
what is read in with loadpics().  The number of tiles in an animation is
bumped to 256, so that the max. tile difference in DEF's animtilerange is
255. (There's no way to have such animations from ART.)

git-svn-id: https://svn.eduke32.com/eduke32@3202 1a8010ca-5511-0410-912e-c29ae57300e0
2012-11-17 19:46:28 +00:00
helixhorned
826be655db picanm[]-cleanup pt1: hide code using animateoffs() behind macro DO_TILE_ANIM.
git-svn-id: https://svn.eduke32.com/eduke32@3186 1a8010ca-5511-0410-912e-c29ae57300e0
2012-11-15 21:09:53 +00:00
helixhorned
6144a2e18c Split r3159..r3161, part 13: Poly{mer,most}, engine changes.
git-svn-id: https://svn.eduke32.com/eduke32@3179 1a8010ca-5511-0410-912e-c29ae57300e0
2012-11-15 14:28:44 +00:00
helixhorned
107fa9cc39 Split r3159..r3161, part 12: Add explicit casts, non-pointer types.
Notes:
 - Atomic Edition (Censored) -> Plutonium Pak in grpscan.c
 - "scale" in astub.c:drawtileinfo() is incorrect, I think.
 - in demo.c, the gethitickms() value should be returned to a double.

git-svn-id: https://svn.eduke32.com/eduke32@3178 1a8010ca-5511-0410-912e-c29ae57300e0
2012-11-15 14:28:41 +00:00
helixhorned
61d038f217 Split r3159..r3161, part 11: Add explicit casts, pointer types.
git-svn-id: https://svn.eduke32.com/eduke32@3177 1a8010ca-5511-0410-912e-c29ae57300e0
2012-11-15 14:28:36 +00:00
helixhorned
5ad385c043 Split r3159..r3161, part 10: add explicit casts to *alloc return values.
NOTE: changes such as these are best viewed with something like
git diff (...) --color-words='[a-zA-Z0-9_]+|[^[:space:]]'

git-svn-id: https://svn.eduke32.com/eduke32@3176 1a8010ca-5511-0410-912e-c29ae57300e0
2012-11-15 14:28:29 +00:00
helixhorned
274726be9b Split r3159..r3161, part 5: "nowarn" wrapping of printing functions.
git-svn-id: https://svn.eduke32.com/eduke32@3170 1a8010ca-5511-0410-912e-c29ae57300e0
2012-11-15 14:28:04 +00:00
helixhorned
1cd11d06ef Revert "Fix the warnings when building with C++, add MSVC C++ build support."
This reverts r3159..r3161.

Conflicts:
	eduke32/build/include/compat.h
(Handled so that r3163's changes are kept applied.)

git-svn-id: https://svn.eduke32.com/eduke32@3165 1a8010ca-5511-0410-912e-c29ae57300e0
2012-11-15 14:27:45 +00:00
terminx
3ff46c02b2 Fix the warnings when building with C++, add MSVC C++ build support. This also changes the internal type of lotags, hitags and cstat type fields to uint16_t instead of int16_t to clean up some dubious behavior wherein the code was using a value of 32768 as a flag in these fields for certain types of things, like invisible sprites (using the value as if it was uint16_t) where it was elsewhere checking if the value was < 0 (using the value as if it was int16_t). This change may break a few specific effects if any part of the relevant code was missed when looking for areas that needed to be addressed.
I think there's also a fix for the CON precache system breakage in here (lost it in my local tree when I started getting the C++ build working in MSVC, sorry!)


git-svn-id: https://svn.eduke32.com/eduke32@3159 1a8010ca-5511-0410-912e-c29ae57300e0
2012-11-14 23:32:43 +00:00
Plagman
67c7d67166 polymer: only let emitshadow affect shadows, not lightmaps.
Lightmaps are already opt-in anyway.

git-svn-id: https://svn.eduke32.com/eduke32@3093 1a8010ca-5511-0410-912e-c29ae57300e0
2012-10-21 18:41:09 +00:00
Plagman
e726484ccc polymer: add support for negative lights
And hook them up to cstat 128 (half-submerged, 'c' in mapster).

git-svn-id: https://svn.eduke32.com/eduke32@3092 1a8010ca-5511-0410-912e-c29ae57300e0
2012-10-21 04:52:43 +00:00
Plagman
9d10b0b087 polymer: add a prlight flag to make shadow-less spotlights
And hook it up to SE cstat 64 ('1' in mapster32). This disables both lightmaps
and shadow maps for the spotlight; please let me know if you have a usecase
where you want lightmaps but no shadow maps for specific lights.

git-svn-id: https://svn.eduke32.com/eduke32@3091 1a8010ca-5511-0410-912e-c29ae57300e0
2012-10-21 03:41:13 +00:00
helixhorned
d4ff4c4595 Clean up updatesector* family, no functional changes.
- factor out the "is inside" predicates
- rename updatesector_onlynextwalls() -> updatesectorbreadth()
- add ATTRIBUTE((nonnull(4))) to the bitmap arg of updatesectorexclude().

git-svn-id: https://svn.eduke32.com/eduke32@3037 1a8010ca-5511-0410-912e-c29ae57300e0
2012-10-01 17:52:09 +00:00
helixhorned
aba1ce9e7f Disable spot lights on ATI cards, fixing the recent crashes with Catalyst 12.8.
git-svn-id: https://svn.eduke32.com/eduke32@3027 1a8010ca-5511-0410-912e-c29ae57300e0
2012-09-24 21:09:37 +00:00
helixhorned
7f74880c96 Move #include <math.h> from polymer.h to polymer.c.
git-svn-id: https://svn.eduke32.com/eduke32@2985 1a8010ca-5511-0410-912e-c29ae57300e0
2012-09-02 14:05:23 +00:00
helixhorned
a17cdd9d95 Polymer: fix underwalls being not animated (introduced in r2823).
git-svn-id: https://svn.eduke32.com/eduke32@2835 1a8010ca-5511-0410-912e-c29ae57300e0
2012-07-15 09:23:58 +00:00
helixhorned
9000e23683 Polymer: simplify some code while I'm at it (equivalence tranformations only)
git-svn-id: https://svn.eduke32.com/eduke32@2823 1a8010ca-5511-0410-912e-c29ae57300e0
2012-07-09 19:00:21 +00:00
helixhorned
d66856eeea Polymer: bring the ypanning correction for non-pow2 walls closer to Pmost's, pt2
This changes a constant inside the panning calculation from 256 to 255 (making
e.g. panning 255 and 0 the same in the "San Andreas fault" sign in E1L5) and
uses the correct reference wall for the "do panning correction?" conditional.
Now, the problematic walls should look the same as in Polymost.

git-svn-id: https://svn.eduke32.com/eduke32@2822 1a8010ca-5511-0410-912e-c29ae57300e0
2012-07-09 19:00:17 +00:00
helixhorned
fe1a5fe2a6 Polymer: bring the ypanning correction for non-pow2 walls closer to Pmost's, pt1
This makes the corrections conditional on where they appear in (under-, over-,
white or mask wall).

git-svn-id: https://svn.eduke32.com/eduke32@2821 1a8010ca-5511-0410-912e-c29ae57300e0
2012-07-09 19:00:14 +00:00
helixhorned
dfdcce090b Polymer: factor out wall y panning coefficient calculation.
Non-pow2 wall/mask drawing in classic introduced cases where walls are
drawn "incorrectly" because they were constructed with the old behavior
in mind.  Polymer appears to "correct" for it partially, but doesn't cover
all cases.  Specifically, now we have:
 - E1L1 first inside secret room (5000, 50000): Polymer draws like Duke 1.5,
   classic now draws with an offset.
 - E3L2 near the vault (-20000, 25000): both classic and Polymer draw with
   offsets compared to Duke 1.5, but they're different!

This means that more research is needed into what makes these two cases
diverge, even though both have the same root cause.

!!! Also, mappers should abstain from using non-power-of two textures on
    walls until this issue is resolved in a satisfactory fashion !!!

git-svn-id: https://svn.eduke32.com/eduke32@2811 1a8010ca-5511-0410-912e-c29ae57300e0
2012-07-06 15:36:50 +00:00
helixhorned
bdedbc6f76 Constify various char* vars, parameters, etc. for more -Wwrite-strings cleanness
-Wwrite-strings is useful to detect code where string literals and e.g. alloc'd
strings are used side-by-side, potentially creating dangerous situations, or to
find uses of old, non-constified APIs.  However, enabling it would still flood
the log with too many warnings.  Also, GCC wrongly warns for initializations of
char arrays.

git-svn-id: https://svn.eduke32.com/eduke32@2796 1a8010ca-5511-0410-912e-c29ae57300e0
2012-07-01 22:11:33 +00:00
helixhorned
059e8ebe52 Fix a null pointer access in Polymer mouse picking.
Specifically, it was in the "determine searchwall when aiming at floor or
ceiling" part.  Now, if prsectors[]->ceil.plane (or ->floor.plane) is NULL,
we set the searchwall to the sector's firstwall and return.

git-svn-id: https://svn.eduke32.com/eduke32@2610 1a8010ca-5511-0410-912e-c29ae57300e0
2012-04-14 13:04:31 +00:00
helixhorned
90144e1dcc Polymer: when drawing art sky, temporarily set texcoord s wrapping to clamping.
This properly fixes the unwanted vertical lines.

git-svn-id: https://svn.eduke32.com/eduke32@2606 1a8010ca-5511-0410-912e-c29ae57300e0
2012-04-10 20:14:52 +00:00
helixhorned
c5d8aa29ee The obligatory portion of trivial stuff.
git-svn-id: https://svn.eduke32.com/eduke32@2566 1a8010ca-5511-0410-912e-c29ae57300e0
2012-03-28 19:45:25 +00:00
helixhorned
994bdd4759 Polymer: Fix a potential uninitialized mem read in debug msg when in void space.
git-svn-id: https://svn.eduke32.com/eduke32@2565 1a8010ca-5511-0410-912e-c29ae57300e0
2012-03-28 19:45:05 +00:00
plagman
90e410cf47 polymer: cull sprite lights after computing sprite geometry
This was broken ever since updatesprite() had been forked off drawsprite() and
would cause static lights to never hit static sprites until one or the other
changed, after which the light would always get culled against outdated sprite
geometry.

git-svn-id: https://svn.eduke32.com/eduke32@2536 1a8010ca-5511-0410-912e-c29ae57300e0
2012-03-26 00:55:53 +00:00
plagman
3818282811 polymer: don't shadow-optimize light culling in cached sprites
Since updatesprite() only happens once for static sprites, avoiding
light culling if we hit it in a shadow pass means that sprite will
never be lit as long as that happens.

git-svn-id: https://svn.eduke32.com/eduke32@2535 1a8010ca-5511-0410-912e-c29ae57300e0
2012-03-26 00:55:41 +00:00
helixhorned
51398ca749 Rename 'numpalookups' to 'numshades' internally.
git-svn-id: https://svn.eduke32.com/eduke32@2504 1a8010ca-5511-0410-912e-c29ae57300e0
2012-03-20 18:32:00 +00:00
plagman
cdafeef732 polymer: fix animations that loop to frame 0
With VBOs enabled, the virtual pointer to the geometry of frame 0 of a model
is always NULL. This was confusing the polymer code responsible for deciding
whether to enable smooth animations or not, which meant that any animation
that would loop to frame 0 would do it as if animation interpolation was
disabled, which looks very choppy.

git-svn-id: https://svn.eduke32.com/eduke32@2443 1a8010ca-5511-0410-912e-c29ae57300e0
2012-03-11 06:52:41 +00:00
helixhorned
103a6e76f9 constify various cache1d and pragmas functions, some copybuf* -> memcpy/move.
The following functions have const qualifiers attached for the 'destination'
arguments: kdfwrite, dfwrite in cache1d.c and copybuf{byte,reverse,} in the
pragmas source or headers.  A couple uses of the latter ones were replaced
with calls to standard library functions.

git-svn-id: https://svn.eduke32.com/eduke32@2361 1a8010ca-5511-0410-912e-c29ae57300e0
2012-02-18 22:14:45 +00:00
helixhorned
d95511ed1d Fix sprite[] access with indices > MAXSPRITES in Polymer model drawing code.
Internally, updateanimation() now takes a third parameter 'lpal'.

git-svn-id: https://svn.eduke32.com/eduke32@2277 1a8010ca-5511-0410-912e-c29ae57300e0
2012-01-22 17:18:49 +00:00
hendricks266
426ef1494e Add the 'yoffset' token to model definitions to allow models to compensate for ART tiles with large yoffsets, such as #603. Under normal circumstances the existing 'zadd' parameter should be used instead. Special thanks to Supertanker.
git-svn-id: https://svn.eduke32.com/eduke32@2264 1a8010ca-5511-0410-912e-c29ae57300e0
2012-01-17 04:31:59 +00:00
helixhorned
480690aa1d Fix the Polymer hitches first encountered with Parkade.
The cause was a combination of many factors. First, Polymer requires the
start-drawing position to be inside the sector to draw (deviations lead to
incorrect drawing).  This was violated by the game, because it interpolated
the current and next tic position without updating the sectnum, leading to
inconsistencies especially when passing through narrow sectors.  Polymer
worked around it by doing an updatesector() each frame, however this works
poorly for maps with overlapping geometry such as SoS or RoR.

The solution to this is to add a new engine function,
updatesector_onlynextwalls(), which searches the sectors (via nextsector)
in breadth-first fashion instead of from 0 to numsectors-1, like updatesector
does when it fails for the *immediate* nextwall neighbors.

Internally, the breadt-first search helpers are moved into the engine.

git-svn-id: https://svn.eduke32.com/eduke32@2256 1a8010ca-5511-0410-912e-c29ae57300e0
2012-01-14 14:48:30 +00:00
helixhorned
5f50c30ac2 polymer.c: "Compiling GPU program with bits (octal) %o" for easier reading.
Also, for debugging builds, show this message from verbosity level 1 on.

git-svn-id: https://svn.eduke32.com/eduke32@2250 1a8010ca-5511-0410-912e-c29ae57300e0
2012-01-12 20:48:17 +00:00
helixhorned
b926e2a496 - When saving game, clear all polymer lights before. Not doing this makes
the SE ones douple, triple, ... after each save.  Maphack lights are reloaded
with polymer_resetlights() (though I've had them disappearing after load, I
couldn't reproduce it afterwards).
- in debugging builds, print a message when polymer_resetlight is called on a
nonexistent one.  The problem is not so much the call itself (it's guarded),
but the fact that resources on the caller side may not have been freed if it
thinks that those lights do in fact exist. Right now, it's not the case though.
- add 'loaded map hack' messages after some other successful loadmaphack calls

git-svn-id: https://svn.eduke32.com/eduke32@2236 1a8010ca-5511-0410-912e-c29ae57300e0
2012-01-05 21:58:23 +00:00
helixhorned
664e0dcb9b Fix non-TROR build and add a warning that such a build is only useful for
debugging, i.e. savegames and the like will break.

git-svn-id: https://svn.eduke32.com/eduke32@2204 1a8010ca-5511-0410-912e-c29ae57300e0
2011-12-25 15:33:02 +00:00
helixhorned
b85b4d7b7c polymer.c: fix out-of-bounds picanm[] read.
git-svn-id: https://svn.eduke32.com/eduke32@2167 1a8010ca-5511-0410-912e-c29ae57300e0
2011-12-09 19:10:51 +00:00
helixhorned
026e1f44e9 Make Polymer's FOV depend viewingrange variable in a 'tangent-linear'
fashion. Among other things, this makes the FOV widening when shrunk
work. User CON code should always check the initial viewingrange value
when attempting to do FOV effects like zoom, because it is not guaranteed
to be 65536 due to different screen aspect ratios etc.

git-svn-id: https://svn.eduke32.com/eduke32@2078 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-17 18:41:38 +00:00
helixhorned
9196bdbd81 fix osx build: looks like it doesn't have the GL debugging functions
git-svn-id: https://svn.eduke32.com/eduke32@2073 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-11 16:52:53 +00:00
helixhorned
48c49e751f Initialize prlights[lighti].flags.invalidate with 0 when calling
polymer_addlight().  I have no idea whether it's the 'right' thing,
but it fixes this:

Conditional jump or move depends on uninitialised value(s)
  at polymer_updatelights (polymer.c:5090)
  by polymer_drawrooms (polymer.c:938)
              . . .
Uninitialised value was created by a stack allocation
  at loadmaphack (engine.c:9482)

Fix another uninitialized access when rendering jpegs.

git-svn-id: https://svn.eduke32.com/eduke32@2069 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-03 17:43:36 +00:00
plagman
f08610b6c8 Polymer: support for creating a debugging context in winlayer
This also fixes a warning when building for Windows.

git-svn-id: https://svn.eduke32.com/eduke32@2067 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-03 00:14:56 +00:00
plagman
dee99139f5 Polymer: constantly get the textures handle for projective spotlights
Getting the texture handles without requiring invalidation means we can
handle ART-animating tilenums without impacting performance too much.

git-svn-id: https://svn.eduke32.com/eduke32@2058 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-02 07:09:15 +00:00
plagman
93b4d6182e Polymer: preliminary support for GL_ARB_debug_output
This won't actually do anything until the a debug bit is added when
creating the context, but that requires support for GLX_create_context
which SDL doesn't support. I'll add support for WGL_create_context to
winlayer in a bit as a stopgap.

Also updates our local copy of glext.h with a fresh one from the
Khronos registry.

git-svn-id: https://svn.eduke32.com/eduke32@2056 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-02 05:56:35 +00:00
plagman
e7c735418f Polymer: Fix upside-down projective textures
We need to Y-invert the projection texcoords when sampling
from the lightmap.

git-svn-id: https://svn.eduke32.com/eduke32@2055 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-02 03:09:20 +00:00
plagman
7c4b84a8f2 Polymer: apply ART animation to spotlight lightmaps.
git-svn-id: https://svn.eduke32.com/eduke32@2054 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-02 01:44:54 +00:00
plagman
98b6be4fed Polymer: Discard cached sprite planes on texinvalidate
Sprites would stick with their old material on global palette change.
This goes through all prsprites and clobbers their CRCs so that an
alternate skin / tint / highpal can be applied accordingly.

git-svn-id: https://svn.eduke32.com/eduke32@2053 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-02 01:00:14 +00:00
plagman
a6d349c90a Polymer: account for model flipping for backface culling.
The winding order of faces is different if only flipping about X or Y,
and we were unconditionally culling CW faces.

git-svn-id: https://svn.eduke32.com/eduke32@2052 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-02 00:32:00 +00:00
plagman
6863a463b4 polymer: fix leading whitespace in polymer_drawmdsprite
git-svn-id: https://svn.eduke32.com/eduke32@2051 1a8010ca-5511-0410-912e-c29ae57300e0
2011-10-02 00:31:46 +00:00
helixhorned
bb72f803c4 Two tweaks to make the precaching more efficient/less redundant in the game.
First, if we're in Polymer, don't precache tinted tiles that have a highpal
for that certain pal.  Second, don't precache tiles for palnum 251 (the last
non-reserved one, which is used as a crosshair pal). Assuming that there are
no other tints, this cuts the initial precache time and cache size on disk in
half.

git-svn-id: https://svn.eduke32.com/eduke32@2045 1a8010ca-5511-0410-912e-c29ae57300e0
2011-09-28 20:30:24 +00:00
plagman
03429e8f2e Polymer: sanitize backface culling
Keep track of which side is getting culled, swap around mirrors, swap
around model drawing.

git-svn-id: https://svn.eduke32.com/eduke32@2032 1a8010ca-5511-0410-912e-c29ae57300e0
2011-09-18 07:18:50 +00:00
helixhorned
843689f8a0 polymer.c: Fix a potential zero-size calloc call when a two-walled sector
is present (like in E4L1).  Also sneak in a trivial change in cache1d.c

git-svn-id: https://svn.eduke32.com/eduke32@2010 1a8010ca-5511-0410-912e-c29ae57300e0
2011-09-06 17:46:34 +00:00
plagman
c17818aa6e Polymer: fix leak of GL query objects
In cases where performing occlusion queries for multiple red walls
leading to the same sector, we would sometimes leak a number of
query objects. This was apparently harmless on NVIDIA drivers, but
would leak tons of memory on ATI.

git-svn-id: https://svn.eduke32.com/eduke32@1993 1a8010ca-5511-0410-912e-c29ae57300e0
2011-08-28 04:42:27 +00:00
plagman
95d6c6f281 Polymer: fix sector masks translucency.
The code was using the Polymer-cached version of the sector cstat to
determine the translucency of its diffuse material, meaning it would
never get it right on the first try; that's what you get for having
completely different variables named 's' and 'sec'.

git-svn-id: https://svn.eduke32.com/eduke32@1991 1a8010ca-5511-0410-912e-c29ae57300e0
2011-08-21 19:41:34 +00:00
plagman
458ad8fa04 Polymer: Don't draw back faces of sector masks.
We normally enable backface culling always, but turn it off for
two-sided sprites; we need to make sure it's re-enabled after that
as sector masks are drawn after.

git-svn-id: https://svn.eduke32.com/eduke32@1990 1a8010ca-5511-0410-912e-c29ae57300e0
2011-08-21 19:41:22 +00:00
plagman
8e5bf7a89c Polymer: fix external view.
Some of the ROR code was operating under the assumption that drawasks
always correspond to one call of polymer_displarooms(), but that's not
necessarily the case; external view draws all sectors from the top
polymer_drawrooms(), which was causing crashes. Just ignore the sector
mask queues in external view mode, we already don't draw masked walls.

git-svn-id: https://svn.eduke32.com/eduke32@1982 1a8010ca-5511-0410-912e-c29ae57300e0
2011-08-20 21:06:00 +00:00
plagman
0423ff8184 Polymer: propagate lights across vertical boundaries.
Check all the bunch siblings if we get a floor/ceiling hit and walk
them if their own planes hit.

git-svn-id: https://svn.eduke32.com/eduke32@1981 1a8010ca-5511-0410-912e-c29ae57300e0
2011-08-20 21:05:49 +00:00
plagman
8250e5f3e8 Polymer: add preliminary support for sector masks.
When walking the sectors in displayrooms, detect floor/sector masks to
place them in a mask queue. The queues are allocated on the heap, but
a stack pointer is maintained by the displayrooms to allow it to play
nice with mirror recursion.

Right now the masks are drawn after all of drawmasks is finished; that
means you can see sprites and wall masks through sector masks, but not
the opposite. There is a slight attempt at blending far to near, but
nothing too conclusive yet; that means that in some cases some sector
masks won't be visible through other sector masks, but it should work
for trivial cases.

The next step would be to copy all the drawmasks logic into Polymer
and have it (attempt to) properly interleave sector masks where they
belong in the blending order.

git-svn-id: https://svn.eduke32.com/eduke32@1980 1a8010ca-5511-0410-912e-c29ae57300e0
2011-08-20 21:05:38 +00:00
plagman
e77548d42a Polymer: Don't draw 1-way walls twice.
Previously they would get counted both as 1-way walls for immediate
drawing and as mask walls for delayed drawing.

git-svn-id: https://svn.eduke32.com/eduke32@1979 1a8010ca-5511-0410-912e-c29ae57300e0
2011-08-20 21:05:24 +00:00
plagman
98061f3a38 Polymer: Don't bother fogcalc()ing invisible planes.
Doesn't actually matter that much.

git-svn-id: https://svn.eduke32.com/eduke32@1978 1a8010ca-5511-0410-912e-c29ae57300e0
2011-08-20 21:05:14 +00:00
plagman
5b379decc6 Polymer: handle floor/ceiling translucency.
Assigns the right alpha value to floor/ceiling planes if their
translucency bits are set and make sure that changing the cstat now
triggers an update of the material for editing purposes.

This doesn't do anything by itself, but will be needed to correctly
draw floor/ceiling masks.

git-svn-id: https://svn.eduke32.com/eduke32@1977 1a8010ca-5511-0410-912e-c29ae57300e0
2011-08-20 21:05:04 +00:00
plagman
e7fc03ed33 Polymer: Reorganize main displayrooms loop a bit.
When walking the sectors, put more drawing work between queuing and
reaping the occlusion queries to potentially make them more efficient.

git-svn-id: https://svn.eduke32.com/eduke32@1976 1a8010ca-5511-0410-912e-c29ae57300e0
2011-08-20 21:04:53 +00:00