zdoom/raze-gles
0
0
Fork 0
mirror of https://github.com/ZDoom/raze-gles.git synced 2024-12-27 04:00:42 +00:00
Code Issues Projects Releases Packages Wiki Activity
raze-gles/libraries/game-music-emu/gme/Ym2612_MAME.cpp
Christoph Oelckers 718112a8fe - added external libraries for music format playback and decompression from GZDoom. 
Currently none of these is being used, but eventually they will, once more code gets ported over.
So it's better to have them right away and avoid editing the project file too much, only to revert that later.
2019-09-22 08:59:48 +02:00

3108 lines
88 KiB
C++
Raw Blame History

// Game_Music_Emu https://bitbucket.org/mpyne/game-music-emu/
// Based on Mame YM2612 ym2612.c
#include "Ym2612_MAME.h"
/*
**
** File: fm2612.c -- software implementation of Yamaha YM2612 FM sound generator
** Split from fm.c to keep 2612 fixes from infecting other OPN chips
**
** Copyright Jarek Burczynski (bujar at mame dot net)
** Copyright Tatsuyuki Satoh , MultiArcadeMachineEmulator development
**
** Version 1.5.1 (Genesis Plus GX ym2612.c rev. 368)
**
*/
/*
** History:
**
** 2006~2012 Eke-Eke (Genesis Plus GX):
** Huge thanks to Nemesis, lot of those fixes came from his tests on Sega Genesis hardware
** More informations at http://gendev.spritesmind.net/forum/viewtopic.php?t=386
**
** TODO:
**
** - core documentation
** - BUSY flag support
**
** CHANGELOG:
**
** 26-09-2017 Eke-Eke (Genesis Plus GX):
** - fixed EG counter loopback behavior (verified on YM3438 die)
** - reverted changes to EG rates 2-7 increment values
**
** xx-xx-xxxx
** - fixed LFO implementation:
** .added support for CH3 special mode: fixes various sound effects (birds in Warlock, bug sound in Aladdin...)
** .inverted LFO AM waveform: fixes Spider-Man & Venom : Separation Anxiety (intro), California Games (surfing event)
** .improved LFO timing accuracy: now updated AFTER sample output, like EG/PG updates, and without any precision loss anymore.
** - improved internal timers emulation
** - adjusted lowest EG rates increment values
** - fixed Attack Rate not being updated in some specific cases (Batman & Robin intro)
** - fixed EG behavior when Attack Rate is maximal
** - fixed EG behavior when SL=0 (Mega Turrican tracks 03,09...) or/and Key ON occurs at minimal attenuation
** - implemented EG output immediate changes on register writes
** - fixed YM2612 initial values (after the reset): fixes missing intro in B.O.B
** - implemented Detune overflow (Ariel, Comix Zone, Shaq Fu, Spiderman & many other games using GEMS sound engine)
** - implemented accurate CSM mode emulation
** - implemented accurate SSG-EG emulation (Asterix, Beavis&Butthead, Bubba'n Stix & many other games)
** - implemented accurate address/data ports behavior
**
** 06-23-2007 Zsolt Vasvari:
** - changed the timing not to require the use of floating point calculations
**
** 03-08-2003 Jarek Burczynski:
** - fixed YM2608 initial values (after the reset)
** - fixed flag and irqmask handling (YM2608)
** - fixed BUFRDY flag handling (YM2608)
**
** 14-06-2003 Jarek Burczynski:
** - implemented all of the YM2608 status register flags
** - implemented support for external memory read/write via YM2608
** - implemented support for deltat memory limit register in YM2608 emulation
**
** 22-05-2003 Jarek Burczynski:
** - fixed LFO PM calculations (copy&paste bugfix)
**
** 08-05-2003 Jarek Burczynski:
** - fixed SSG support
**
** 22-04-2003 Jarek Burczynski:
** - implemented 100% correct LFO generator (verified on real YM2610 and YM2608)
**
** 15-04-2003 Jarek Burczynski:
** - added support for YM2608's register 0x110 - status mask
**
** 01-12-2002 Jarek Burczynski:
** - fixed register addressing in YM2608, YM2610, YM2610B chips. (verified on real YM2608)
** The addressing patch used for early Neo-Geo games can be removed now.
**
** 26-11-2002 Jarek Burczynski, Nicola Salmoria:
** - recreated YM2608 ADPCM ROM using data from real YM2608's output which leads to:
** - added emulation of YM2608 drums.
** - output of YM2608 is two times lower now - same as YM2610 (verified on real YM2608)
**
** 16-08-2002 Jarek Burczynski:
** - binary exact Envelope Generator (verified on real YM2203);
** identical to YM2151
** - corrected 'off by one' error in feedback calculations (when feedback is off)
** - corrected connection (algorithm) calculation (verified on real YM2203 and YM2610)
**
** 18-12-2001 Jarek Burczynski:
** - added SSG-EG support (verified on real YM2203)
**
** 12-08-2001 Jarek Burczynski:
** - corrected sin_tab and tl_tab data (verified on real chip)
** - corrected feedback calculations (verified on real chip)
** - corrected phase generator calculations (verified on real chip)
** - corrected envelope generator calculations (verified on real chip)
** - corrected FM volume level (YM2610 and YM2610B).
** - changed YMxxxUpdateOne() functions (YM2203, YM2608, YM2610, YM2610B, YM2612) :
** this was needed to calculate YM2610 FM channels output correctly.
** (Each FM channel is calculated as in other chips, but the output of the channel
** gets shifted right by one *before* sending to accumulator. That was impossible to do
** with previous implementation).
**
** 23-07-2001 Jarek Burczynski, Nicola Salmoria:
** - corrected YM2610 ADPCM type A algorithm and tables (verified on real chip)
**
** 11-06-2001 Jarek Burczynski:
** - corrected end of sample bug in ADPCMA_calc_cha().
** Real YM2610 checks for equality between current and end addresses (only 20 LSB bits).
**
** 08-12-98 hiro-shi:
** rename ADPCMA -> ADPCMB, ADPCMB -> ADPCMA
** move ROM limit check.(CALC_CH? -> 2610Write1/2)
** test program (ADPCMB_TEST)
** move ADPCM A/B end check.
** ADPCMB repeat flag(no check)
** change ADPCM volume rate (8->16) (32->48).
**
** 09-12-98 hiro-shi:
** change ADPCM volume. (8->16, 48->64)
** replace ym2610 ch0/3 (YM-2610B)
** change ADPCM_SHIFT (10->8) missing bank change 0x4000-0xffff.
** add ADPCM_SHIFT_MASK
** change ADPCMA_DECODE_MIN/MAX.
*/
/************************************************************************/
/* comment of hiro-shi(Hiromitsu Shioya) */
/* YM2610(B) = OPN-B */
/* YM2610 : PSG:3ch FM:4ch ADPCM(18.5KHz):6ch DeltaT ADPCM:1ch */
/* YM2610B : PSG:3ch FM:6ch ADPCM(18.5KHz):6ch DeltaT ADPCM:1ch */
/************************************************************************/
#include <stdlib.h>
#include <string.h> /* for memset */
#include <stddef.h> /* for NULL */
#include <math.h>
#include <stdint.h>
namespace Ym2612_MameImpl
{
/* ---- mamedef - begin ---- */
/* typedefs to use MAME's (U)INTxx types (copied from MAME\src\ods\odscomm.h) */
/* 8-bit values */
typedef unsigned char UINT8;
typedef signed char INT8;
/* 16-bit values */
typedef unsigned short UINT16;
typedef signed short INT16;
/* 32-bit values */
#ifndef _WINDOWS_H
typedef unsigned int UINT32;
typedef signed int INT32;
#endif
/* 64-bit values */
#ifndef _WINDOWS_H
#ifdef _MSC_VER
typedef signed __int64 INT64;
typedef unsigned __int64 UINT64;
#else
__extension__ typedef unsigned long long UINT64;
__extension__ typedef signed long long INT64;
#endif
#endif
/* offsets and addresses are 32-bit (for now...) */
typedef UINT32 offs_t;
/* stream_sample_t is used to represent a single sample in a sound stream */
typedef INT16 stream_sample_t;
#if defined(VGM_BIG_ENDIAN)
#define BYTE_XOR_BE(x) (x)
#elif defined(VGM_LITTLE_ENDIAN)
#define BYTE_XOR_BE(x) ((x) ^ 0x01)
#else
/* don't define BYTE_XOR_BE so that it throws an error when compiling */
#endif
#if defined(_MSC_VER)
//#define INLINE static __forceinline
#define INLINE static __inline
#elif defined(__GNUC__)
#define INLINE static __inline__
#else
#define INLINE static inline
#endif
#ifndef M_PI
#define M_PI 3.14159265358979323846
#endif
#ifdef _DEBUG
#define logerror printf
#else
#define logerror
#endif
typedef void (*SRATE_CALLBACK)(void*, UINT32);
/* ---- mamedef - end ---- */
/* --- select emulation chips --- */
/*
#define BUILD_YM2203 (HAS_YM2203) // build YM2203(OPN) emulator
#define BUILD_YM2608 (HAS_YM2608) // build YM2608(OPNA) emulator
#define BUILD_YM2610 (HAS_YM2610) // build YM2610(OPNB) emulator
#define BUILD_YM2610B (HAS_YM2610B) // build YM2610B(OPNB?)emulator
#define BUILD_YM2612 (HAS_YM2612) // build YM2612(OPN2) emulator
#define BUILD_YM3438 (HAS_YM3438) // build YM3438(OPN) emulator
*/
#define BUILD_YM2203 0
#define BUILD_YM2608 0
#define BUILD_YM2610 0
#define BUILD_YM2610B 0
#define BUILD_YM2612 1
#define BUILD_YM3438 0
#define FM_BUSY_FLAG_SUPPORT 0
/* select bit size of output : 8 or 16 */
#define FM_SAMPLE_BITS 16
/* select timer system internal or external */
#define FM_INTERNAL_TIMER 1
/* --- speedup optimize --- */
/* busy flag enulation , The definition of FM_GET_TIME_NOW() is necessary. */
/* #define FM_BUSY_FLAG_SUPPORT 1 */
/* --- external SSG(YM2149/AY-3-8910)emulator interface port */
/* used by YM2203,YM2608,and YM2610 */
typedef struct _ssg_callbacks ssg_callbacks;
struct _ssg_callbacks
{
void (*set_clock)(void *param, int clock);
void (*write)(void *param, int address, int data);
int (*read)(void *param);
void (*reset)(void *param);
};
/* --- external callback funstions for realtime update --- */
#if FM_BUSY_FLAG_SUPPORT
#define TIME_TYPE attotime
#define UNDEFINED_TIME attotime_zero
#define FM_GET_TIME_NOW(machine) timer_get_time(machine)
#define ADD_TIMES(t1, t2) attotime_add((t1), (t2))
#define COMPARE_TIMES(t1, t2) attotime_compare((t1), (t2))
#define MULTIPLY_TIME_BY_INT(t,i) attotime_mul(t, i)
#endif
/* compiler dependence */
#if 0
#ifndef OSD_CPU_H
#define OSD_CPU_H
typedef unsigned char UINT8; /* unsigned 8bit */
typedef unsigned short UINT16; /* unsigned 16bit */
typedef unsigned int UINT32; /* unsigned 32bit */
typedef signed char INT8; /* signed 8bit */
typedef signed short INT16; /* signed 16bit */
typedef signed int INT32; /* signed 32bit */
#endif /* OSD_CPU_H */
#endif
typedef stream_sample_t FMSAMPLE;
/*
#if (FM_SAMPLE_BITS==16)
typedef INT16 FMSAMPLE;
#endif
#if (FM_SAMPLE_BITS==8)
typedef unsigned char FMSAMPLE;
#endif
*/
typedef void (*FM_TIMERHANDLER)(void *param,int c,int cnt,int clock);
typedef void (*FM_IRQHANDLER)(void *param,int irq);
/* FM_TIMERHANDLER : Stop or Start timer */
/* int n = chip number */
/* int c = Channel 0=TimerA,1=TimerB */
/* int count = timer count (0=stop) */
/* doube stepTime = step time of one count (sec.)*/
/* FM_IRQHHANDLER : IRQ level changing sense */
/* int n = chip number */
/* int irq = IRQ level 0=OFF,1=ON */
/**
* @brief Initialize chip and return the instance
* @param param Unused, keep NULL
* @param baseclock YM2612 clock
* @param rate Output sample rate
* @param TimerHandler Keep NULL
* @param IRQHandler Keep NULL
* @return Chip instance or NULL on any error
*/
static void * ym2612_init(void *param, int baseclock, int rate,
FM_TIMERHANDLER TimerHandler,FM_IRQHANDLER IRQHandler);
/**
* @brief Free chip instance
* @param chip Chip instance
*/
static void ym2612_shutdown(void *chip);
/**
* @brief Reset state of the chip
* @param chip Chip instance
*/
static void ym2612_reset_chip(void *chip);
/**
* @brief Generate stereo output of specified length
* @param chip Chip instance
* @param buffer Output sound buffer
* @param frames Output buffer size in frames (one frame - two array entries of the buffer)
* @param mix 0 - override buffer data, 1 - mix output data with a content of the buffer
*/
static void ym2612_generate(void *chip, FMSAMPLE *buffer, int frames, int mix);
#define ym2612_update_one(chip, buffer, length) ym2612_generate(chip, buffer, length, 0)
/**
* @brief Single-Sample generation prepare
* @param chip Chip instance
*/
static void ym2612_pre_generate(void *chip);
/**
* @brief Generate single stereo PCM frame. Will be used native sample rate of 53267 Hz
* @param chip Chip instance
* @param buffer One stereo PCM frame
*/
static void ym2612_generate_one_native(void *chip, FMSAMPLE buffer[2]);
/* void ym2612_post_generate(void *chip, int length); */
static int ym2612_write(void *chip, int a,unsigned char v);
#if 0
static unsigned char ym2612_read(void *chip,int a);
static int ym2612_timer_over(void *chip, int c );
#endif
#ifdef __STATE_H__
static void ym2612_postload(void *chip);
#endif
static void ym2612_set_mutemask(void *chip, UINT32 MuteMask);
#if 0
static void ym2612_setoptions(UINT8 Flags);
#endif
static stream_sample_t *DUMMYBUF = NULL;
/* shared function building option */
#define BUILD_OPN (BUILD_YM2203||BUILD_YM2608||BUILD_YM2610||BUILD_YM2610B||BUILD_YM2612||BUILD_YM3438)
#define BUILD_OPN_PRESCALER (BUILD_YM2203||BUILD_YM2608)
#define RSM_ENABLE 0
#define RSM_FRAC 10
/* globals */
#define TYPE_SSG 0x01 /* SSG support */
#define TYPE_LFOPAN 0x02 /* OPN type LFO and PAN */
#define TYPE_6CH 0x04 /* FM 6CH / 3CH */
#define TYPE_DAC 0x08 /* YM2612's DAC device */
#define TYPE_ADPCM 0x10 /* two ADPCM units */
#define TYPE_2610 0x20 /* bogus flag to differentiate 2608 from 2610 */
#define TYPE_YM2203 (TYPE_SSG)
#define TYPE_YM2608 (TYPE_SSG |TYPE_LFOPAN |TYPE_6CH |TYPE_ADPCM)
#define TYPE_YM2610 (TYPE_SSG |TYPE_LFOPAN |TYPE_6CH |TYPE_ADPCM |TYPE_2610)
#define TYPE_YM2612 (TYPE_DAC |TYPE_LFOPAN |TYPE_6CH)
/* globals */
#define FREQ_SH 16 /* 16.16 fixed point (frequency calculations) */
#define EG_SH 16 /* 16.16 fixed point (envelope generator timing) */
#define LFO_SH 24 /* 8.24 fixed point (LFO calculations) */
#define TIMER_SH 16 /* 16.16 fixed point (timers calculations) */
#define FREQ_MASK ((1<<FREQ_SH)-1)
#define MAXOUT (+32767)
#define MINOUT (-32768)
/* envelope generator */
#define ENV_BITS 10
#define ENV_LEN (1<<ENV_BITS)
#define ENV_STEP (128.0/ENV_LEN)
#define MAX_ATT_INDEX (ENV_LEN-1) /* 1023 */
#define MIN_ATT_INDEX (0) /* 0 */
#define EG_ATT 4
#define EG_DEC 3
#define EG_SUS 2
#define EG_REL 1
#define EG_OFF 0
/* operator unit */
#define SIN_BITS 10
#define SIN_LEN (1<<SIN_BITS)
#define SIN_MASK (SIN_LEN-1)
#define TL_RES_LEN (256) /* 8 bits addressing (real chip) */
/* TL_TAB_LEN is calculated as:
* 13 - sinus amplitude bits (Y axis)
* 2 - sinus sign bit (Y axis)
* TL_RES_LEN - sinus resolution (X axis)
*/
#define TL_TAB_LEN (13*2*TL_RES_LEN)
static signed int tl_tab[TL_TAB_LEN];
#define ENV_QUIET (TL_TAB_LEN>>3)
/* sin waveform table in 'decibel' scale */
static unsigned int sin_tab[SIN_LEN];
/* sustain level table (3dB per step) */
/* bit0, bit1, bit2, bit3, bit4, bit5, bit6 */
/* 1, 2, 4, 8, 16, 32, 64 (value)*/
/* 0.75, 1.5, 3, 6, 12, 24, 48 (dB)*/
/* 0 - 15: 0, 3, 6, 9,12,15,18,21,24,27,30,33,36,39,42,93 (dB)*/
/* attenuation value (10 bits) = (SL << 2) << 3 */
#define SC(db) (UINT32) ( db * (4.0/ENV_STEP) )
static const UINT32 sl_table[16]={
SC( 0),SC( 1),SC( 2),SC(3 ),SC(4 ),SC(5 ),SC(6 ),SC( 7),
SC( 8),SC( 9),SC(10),SC(11),SC(12),SC(13),SC(14),SC(31)
};
#undef SC
#define RATE_STEPS (8)
static const UINT8 eg_inc[19*RATE_STEPS]={
/*cycle:0 1 2 3 4 5 6 7*/
/* 0 */ 0,1, 0,1, 0,1, 0,1, /* rates 00..11 0 (increment by 0 or 1) */
/* 1 */ 0,1, 0,1, 1,1, 0,1, /* rates 00..11 1 */
/* 2 */ 0,1, 1,1, 0,1, 1,1, /* rates 00..11 2 */
/* 3 */ 0,1, 1,1, 1,1, 1,1, /* rates 00..11 3 */
/* 4 */ 1,1, 1,1, 1,1, 1,1, /* rate 12 0 (increment by 1) */
/* 5 */ 1,1, 1,2, 1,1, 1,2, /* rate 12 1 */
/* 6 */ 1,2, 1,2, 1,2, 1,2, /* rate 12 2 */
/* 7 */ 1,2, 2,2, 1,2, 2,2, /* rate 12 3 */
/* 8 */ 2,2, 2,2, 2,2, 2,2, /* rate 13 0 (increment by 2) */
/* 9 */ 2,2, 2,4, 2,2, 2,4, /* rate 13 1 */
/*10 */ 2,4, 2,4, 2,4, 2,4, /* rate 13 2 */
/*11 */ 2,4, 4,4, 2,4, 4,4, /* rate 13 3 */
/*12 */ 4,4, 4,4, 4,4, 4,4, /* rate 14 0 (increment by 4) */
/*13 */ 4,4, 4,8, 4,4, 4,8, /* rate 14 1 */
/*14 */ 4,8, 4,8, 4,8, 4,8, /* rate 14 2 */
/*15 */ 4,8, 8,8, 4,8, 8,8, /* rate 14 3 */
/*16 */ 8,8, 8,8, 8,8, 8,8, /* rates 15 0, 15 1, 15 2, 15 3 (increment by 8) */
/*17 */ 16,16,16,16,16,16,16,16, /* rates 15 2, 15 3 for attack */
/*18 */ 0,0, 0,0, 0,0, 0,0, /* infinity rates for attack and decay(s) */
};
#define O(a) (a*RATE_STEPS)
/*note that there is no O(17) in this table - it's directly in the code */
static const UINT8 eg_rate_select2612[32+64+32]={ /* Envelope Generator rates (32 + 64 rates + 32 RKS) */
/* 32 infinite time rates (same as Rate 0) */
O(18),O(18),O(18),O(18),O(18),O(18),O(18),O(18),
O(18),O(18),O(18),O(18),O(18),O(18),O(18),O(18),
O(18),O(18),O(18),O(18),O(18),O(18),O(18),O(18),
O(18),O(18),O(18),O(18),O(18),O(18),O(18),O(18),
/* rates 00-11 */
/*
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
*/
O(18),O(18),O( 2),O( 3), /* from Nemesis's tests on real YM2612 hardware */
O( 0),O( 1),O( 2),O( 2), /* Nemesis's tests */
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
/* rate 12 */
O( 4),O( 5),O( 6),O( 7),
/* rate 13 */
O( 8),O( 9),O(10),O(11),
/* rate 14 */
O(12),O(13),O(14),O(15),
/* rate 15 */
O(16),O(16),O(16),O(16),
/* 32 dummy rates (same as 15 3) */
O(16),O(16),O(16),O(16),O(16),O(16),O(16),O(16),
O(16),O(16),O(16),O(16),O(16),O(16),O(16),O(16),
O(16),O(16),O(16),O(16),O(16),O(16),O(16),O(16),
O(16),O(16),O(16),O(16),O(16),O(16),O(16),O(16)
};
#undef O
/*rate 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15*/
/*shift 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0, 0, 0, 0 */
/*mask 2047, 1023, 511, 255, 127, 63, 31, 15, 7, 3, 1, 0, 0, 0, 0, 0 */
#define O(a) (a*1)
static const UINT8 eg_rate_shift[32+64+32]={ /* Envelope Generator counter shifts (32 + 64 rates + 32 RKS) */
/* 32 infinite time rates */
/* O(0),O(0),O(0),O(0),O(0),O(0),O(0),O(0),
O(0),O(0),O(0),O(0),O(0),O(0),O(0),O(0),
O(0),O(0),O(0),O(0),O(0),O(0),O(0),O(0),
O(0),O(0),O(0),O(0),O(0),O(0),O(0),O(0), */
/* fixed (should be the same as rate 0, even if it makes no difference since increment value is 0 for these rates) */
O(11),O(11),O(11),O(11),O(11),O(11),O(11),O(11),
O(11),O(11),O(11),O(11),O(11),O(11),O(11),O(11),
O(11),O(11),O(11),O(11),O(11),O(11),O(11),O(11),
O(11),O(11),O(11),O(11),O(11),O(11),O(11),O(11),
/* rates 00-11 */
O(11),O(11),O(11),O(11),
O(10),O(10),O(10),O(10),
O( 9),O( 9),O( 9),O( 9),
O( 8),O( 8),O( 8),O( 8),
O( 7),O( 7),O( 7),O( 7),
O( 6),O( 6),O( 6),O( 6),
O( 5),O( 5),O( 5),O( 5),
O( 4),O( 4),O( 4),O( 4),
O( 3),O( 3),O( 3),O( 3),
O( 2),O( 2),O( 2),O( 2),
O( 1),O( 1),O( 1),O( 1),
O( 0),O( 0),O( 0),O( 0),
/* rate 12 */
O( 0),O( 0),O( 0),O( 0),
/* rate 13 */
O( 0),O( 0),O( 0),O( 0),
/* rate 14 */
O( 0),O( 0),O( 0),O( 0),
/* rate 15 */
O( 0),O( 0),O( 0),O( 0),
/* 32 dummy rates (same as 15 3) */
O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),
O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),
O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),
O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0)
};
#undef O
static const UINT8 dt_tab[4 * 32]={
/* this is YM2151 and YM2612 phase increment data (in 10.10 fixed point format)*/
/* FD=0 */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
/* FD=1 */
0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2,
2, 3, 3, 3, 4, 4, 4, 5, 5, 6, 6, 7, 8, 8, 8, 8,
/* FD=2 */
1, 1, 1, 1, 2, 2, 2, 2, 2, 3, 3, 3, 4, 4, 4, 5,
5, 6, 6, 7, 8, 8, 9,10,11,12,13,14,16,16,16,16,
/* FD=3 */
2, 2, 2, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 6, 6, 7,
8 , 8, 9,10,11,12,13,14,16,17,19,20,22,22,22,22
};
/* OPN key frequency number -> key code follow table */
/* fnum higher 4bit -> keycode lower 2bit */
static const UINT8 opn_fktable[16] = {0,0,0,0,0,0,0,1,2,3,3,3,3,3,3,3};
/* 8 LFO speed parameters */
/* each value represents number of samples that one LFO level will last for */
static const UINT32 lfo_samples_per_step[8] = {108, 77, 71, 67, 62, 44, 8, 5};
/*There are 4 different LFO AM depths available, they are:
0 dB, 1.4 dB, 5.9 dB, 11.8 dB
Here is how it is generated (in EG steps):
11.8 dB = 0, 2, 4, 6, 8, 10,12,14,16...126,126,124,122,120,118,....4,2,0
5.9 dB = 0, 1, 2, 3, 4, 5, 6, 7, 8....63, 63, 62, 61, 60, 59,.....2,1,0
1.4 dB = 0, 0, 0, 0, 1, 1, 1, 1, 2,...15, 15, 15, 15, 14, 14,.....0,0,0
(1.4 dB is losing precision as you can see)
It's implemented as generator from 0..126 with step 2 then a shift
right N times, where N is:
8 for 0 dB
3 for 1.4 dB
1 for 5.9 dB
0 for 11.8 dB
*/
static const UINT8 lfo_ams_depth_shift[4] = {8, 3, 1, 0};
/*There are 8 different LFO PM depths available, they are:
0, 3.4, 6.7, 10, 14, 20, 40, 80 (cents)
Modulation level at each depth depends on F-NUMBER bits: 4,5,6,7,8,9,10
(bits 8,9,10 = FNUM MSB from OCT/FNUM register)
Here we store only first quarter (positive one) of full waveform.
Full table (lfo_pm_table) containing all 128 waveforms is build
at run (init) time.
One value in table below represents 4 (four) basic LFO steps
(1 PM step = 4 AM steps).
For example:
at LFO SPEED=0 (which is 108 samples per basic LFO step)
one value from "lfo_pm_output" table lasts for 432 consecutive
samples (4*108=432) and one full LFO waveform cycle lasts for 13824
samples (32*432=13824; 32 because we store only a quarter of whole
waveform in the table below)
*/
static const UINT8 lfo_pm_output[7*8][8]={ /* 7 bits meaningful (of F-NUMBER), 8 LFO output levels per one depth (out of 32), 8 LFO depths */
/* FNUM BIT 4: 000 0001xxxx */
/* DEPTH 0 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 1 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 2 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 3 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 4 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 5 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 6 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 7 */ {0, 0, 0, 0, 1, 1, 1, 1},
/* FNUM BIT 5: 000 0010xxxx */
/* DEPTH 0 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 1 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 2 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 3 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 4 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 5 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 6 */ {0, 0, 0, 0, 1, 1, 1, 1},
/* DEPTH 7 */ {0, 0, 1, 1, 2, 2, 2, 3},
/* FNUM BIT 6: 000 0100xxxx */
/* DEPTH 0 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 1 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 2 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 3 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 4 */ {0, 0, 0, 0, 0, 0, 0, 1},
/* DEPTH 5 */ {0, 0, 0, 0, 1, 1, 1, 1},
/* DEPTH 6 */ {0, 0, 1, 1, 2, 2, 2, 3},
/* DEPTH 7 */ {0, 0, 2, 3, 4, 4, 5, 6},
/* FNUM BIT 7: 000 1000xxxx */
/* DEPTH 0 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 1 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 2 */ {0, 0, 0, 0, 0, 0, 1, 1},
/* DEPTH 3 */ {0, 0, 0, 0, 1, 1, 1, 1},
/* DEPTH 4 */ {0, 0, 0, 1, 1, 1, 1, 2},
/* DEPTH 5 */ {0, 0, 1, 1, 2, 2, 2, 3},
/* DEPTH 6 */ {0, 0, 2, 3, 4, 4, 5, 6},
/* DEPTH 7 */ {0, 0, 4, 6, 8, 8, 0xa, 0xc},
/* FNUM BIT 8: 001 0000xxxx */
/* DEPTH 0 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 1 */ {0, 0, 0, 0, 1, 1, 1, 1},
/* DEPTH 2 */ {0, 0, 0, 1, 1, 1, 2, 2},
/* DEPTH 3 */ {0, 0, 1, 1, 2, 2, 3, 3},
/* DEPTH 4 */ {0, 0, 1, 2, 2, 2, 3, 4},
/* DEPTH 5 */ {0, 0, 2, 3, 4, 4, 5, 6},
/* DEPTH 6 */ {0, 0, 4, 6, 8, 8, 0xa, 0xc},
/* DEPTH 7 */ {0, 0, 8, 0xc,0x10,0x10,0x14,0x18},
/* FNUM BIT 9: 010 0000xxxx */
/* DEPTH 0 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 1 */ {0, 0, 0, 0, 2, 2, 2, 2},
/* DEPTH 2 */ {0, 0, 0, 2, 2, 2, 4, 4},
/* DEPTH 3 */ {0, 0, 2, 2, 4, 4, 6, 6},
/* DEPTH 4 */ {0, 0, 2, 4, 4, 4, 6, 8},
/* DEPTH 5 */ {0, 0, 4, 6, 8, 8, 0xa, 0xc},
/* DEPTH 6 */ {0, 0, 8, 0xc,0x10,0x10,0x14,0x18},
/* DEPTH 7 */ {0, 0,0x10,0x18,0x20,0x20,0x28,0x30},
/* FNUM BIT10: 100 0000xxxx */
/* DEPTH 0 */ {0, 0, 0, 0, 0, 0, 0, 0},
/* DEPTH 1 */ {0, 0, 0, 0, 4, 4, 4, 4},
/* DEPTH 2 */ {0, 0, 0, 4, 4, 4, 8, 8},
/* DEPTH 3 */ {0, 0, 4, 4, 8, 8, 0xc, 0xc},
/* DEPTH 4 */ {0, 0, 4, 8, 8, 8, 0xc,0x10},
/* DEPTH 5 */ {0, 0, 8, 0xc,0x10,0x10,0x14,0x18},
/* DEPTH 6 */ {0, 0,0x10,0x18,0x20,0x20,0x28,0x30},
/* DEPTH 7 */ {0, 0,0x20,0x30,0x40,0x40,0x50,0x60},
};
/* all 128 LFO PM waveforms */
static INT32 lfo_pm_table[128*8*32]; /* 128 combinations of 7 bits meaningful (of F-NUMBER), 8 LFO depths, 32 LFO output levels per one depth */
/* register number to channel number , slot offset */
#define OPN_CHAN(N) (N&3)
#define OPN_SLOT(N) ((N>>2)&3)
/* slot number */
#define SLOT1 0
#define SLOT2 2
#define SLOT3 1
#define SLOT4 3
/* bit0 = Right enable , bit1 = Left enable */
#define OUTD_RIGHT 1
#define OUTD_LEFT 2
#define OUTD_CENTER 3
/* save output as raw 16-bit sample */
/* #define SAVE_SAMPLE */
#ifdef SAVE_SAMPLE
static FILE *sample[1];
#if 1 /*save to MONO file */
#define SAVE_ALL_CHANNELS \
{ signed int pom = lt; \
fputc((unsigned short)pom&0xff,sample[0]); \
fputc(((unsigned short)pom>>8)&0xff,sample[0]); \
}
#else /*save to STEREO file */
#define SAVE_ALL_CHANNELS \
{ signed int pom = lt; \
fputc((unsigned short)pom&0xff,sample[0]); \
fputc(((unsigned short)pom>>8)&0xff,sample[0]); \
pom = rt; \
fputc((unsigned short)pom&0xff,sample[0]); \
fputc(((unsigned short)pom>>8)&0xff,sample[0]); \
}
#endif
#endif
/* struct describing a single operator (SLOT) */
typedef struct
{
INT32 *DT; /* detune :dt_tab[DT] */
UINT8 KSR; /* key scale rate :3-KSR */
UINT32 ar; /* attack rate */
UINT32 d1r; /* decay rate */
UINT32 d2r; /* sustain rate */
UINT32 rr; /* release rate */
UINT8 ksr; /* key scale rate :kcode>>(3-KSR) */
UINT32 mul; /* multiple :ML_TABLE[ML] */
/* Phase Generator */
UINT32 phase; /* phase counter */
INT32 Incr; /* phase step */
/* Envelope Generator */
UINT8 state; /* phase type */
UINT32 tl; /* total level: TL << 3 */
INT32 volume; /* envelope counter */
UINT32 sl; /* sustain level:sl_table[SL] */
UINT32 vol_out; /* current output from EG circuit (without AM from LFO) */
UINT8 eg_sh_ar; /* (attack state) */
UINT8 eg_sel_ar; /* (attack state) */
UINT8 eg_sh_d1r; /* (decay state) */
UINT8 eg_sel_d1r; /* (decay state) */
UINT8 eg_sh_d2r; /* (sustain state) */
UINT8 eg_sel_d2r; /* (sustain state) */
UINT8 eg_sh_rr; /* (release state) */
UINT8 eg_sel_rr; /* (release state) */
UINT8 ssg; /* SSG-EG waveform */
UINT8 ssgn; /* SSG-EG negated output */
UINT8 key; /* 0=last key was KEY OFF, 1=KEY ON */
/* LFO */
UINT32 AMmask; /* AM enable flag */
} FM_SLOT;
typedef struct
{
FM_SLOT SLOT[4]; /* four SLOTs (operators) */
UINT8 ALGO; /* algorithm */
UINT8 FB; /* feedback shift */
INT32 op1_out[2]; /* op1 output for feedback */
INT32 *connect1; /* SLOT1 output pointer */
INT32 *connect3; /* SLOT3 output pointer */
INT32 *connect2; /* SLOT2 output pointer */
INT32 *connect4; /* SLOT4 output pointer */
INT32 *mem_connect;/* where to put the delayed sample (MEM) */
INT32 mem_value; /* delayed sample (MEM) value */
INT32 pms; /* channel PMS */
UINT8 ams; /* channel AMS */
UINT32 fc; /* fnum,blk:adjusted to sample rate */
UINT8 kcode; /* key code: */
UINT32 block_fnum; /* current blk/fnum value for this slot (can be different betweeen slots of one channel in 3slot mode) */
UINT8 Muted;
} FM_CH;
typedef struct
{
/* running_device *device; */
void * param; /* this chip parameter */
double freqbase; /* frequency base */
int timer_prescaler; /* timer prescaler */
UINT8 irq; /* interrupt level */
UINT8 irqmask; /* irq mask */
#if FM_BUSY_FLAG_SUPPORT
TIME_TYPE busy_expiry_time; /* expiry time of the busy status */
#endif
UINT32 clock; /* master clock (Hz) */
UINT32 rate; /* internal sampling rate (Hz) */
#if RSM_ENABLE
INT32 rateratio; /* resampling ratio */
INT32 framecnt; /* resampling frames count*/
FMSAMPLE cur_sample[2]; /* previous sample */
FMSAMPLE prev_sample[2]; /* previous sample */
#endif
UINT8 address; /* address register */
UINT8 status; /* status flag */
UINT32 mode; /* mode CSM / 3SLOT */
UINT8 fn_h; /* freq latch */
UINT8 prescaler_sel; /* prescaler selector */
INT32 TA; /* timer a */
INT32 TAC; /* timer a counter */
UINT8 TB; /* timer b */
INT32 TBC; /* timer b counter */
/* local time tables */
INT32 dt_tab[8][32]; /* DeTune table */
/* Extention Timer and IRQ handler */
FM_TIMERHANDLER timer_handler;
FM_IRQHANDLER IRQ_Handler;
const ssg_callbacks *SSG;
} FM_ST;
/***********************************************************/
/* OPN unit */
/***********************************************************/
/* OPN 3slot struct */
typedef struct
{
UINT32 fc[3]; /* fnum3,blk3: calculated */
UINT8 fn_h; /* freq3 latch */
UINT8 kcode[3]; /* key code */
UINT32 block_fnum[3]; /* current fnum value for this slot (can be different betweeen slots of one channel in 3slot mode) */
UINT8 key_csm; /* CSM mode Key-ON flag */
} FM_3SLOT;
/* OPN/A/B common state */
typedef struct
{
UINT8 type; /* chip type */
FM_ST ST; /* general state */
FM_3SLOT SL3; /* 3 slot mode state */
FM_CH *P_CH; /* pointer of CH */
unsigned int pan[6*2]; /* fm channels output masks (0xffffffff = enable) */
UINT32 eg_cnt; /* global envelope generator counter */
UINT32 eg_timer; /* global envelope generator counter works at frequency = chipclock/144/3 */
UINT32 eg_timer_add; /* step of eg_timer */
UINT32 eg_timer_overflow;/* envelope generator timer overlfows every 3 samples (on real chip) */
/* there are 2048 FNUMs that can be generated using FNUM/BLK registers
but LFO works with one more bit of a precision so we really need 4096 elements */
UINT32 fn_table[4096]; /* fnumber->increment counter */
UINT32 fn_max; /* maximal phase increment (used for phase overflow) */
/* LFO */
UINT8 lfo_cnt; /* current LFO phase (out of 128) */
UINT32 lfo_timer; /* current LFO phase runs at LFO frequency */
UINT32 lfo_timer_add; /* step of lfo_timer */
UINT32 lfo_timer_overflow; /* LFO timer overflows every N samples (depends on LFO frequency) */
UINT32 LFO_AM; /* current LFO AM step */
UINT32 LFO_PM; /* current LFO PM step */
INT32 m2,c1,c2; /* Phase Modulation input for operators 2,3,4 */
INT32 mem; /* one sample delay memory */
INT32 out_fm[6]; /* outputs of working channels */
} FM_OPN;
/* here's the virtual YM2612 */
typedef struct
{
UINT8 REGS[512]; /* registers */
FM_OPN OPN; /* OPN state */
FM_CH CH[6]; /* channel state */
UINT8 addr_A1; /* address line A1 */
/* dac output (YM2612) */
/* int dacen; */
UINT8 dacen;
UINT8 dac_test;
INT32 dacout;
UINT8 MuteDAC;
UINT8 WaveOutMode;
INT32 WaveL;
INT32 WaveR;
} YM2612;
/* log output level */
#define LOG_ERR 3 /* ERROR */
#define LOG_WAR 2 /* WARNING */
#define LOG_INF 1 /* INFORMATION */
#define LOG_LEVEL LOG_INF
#ifndef __RAINE__
#define LOG(n,x) do { if( (n)>=LOG_LEVEL ) logerror x; } while (0)
#endif
/* limitter */
#define Limit(val, max,min) { \
if ( val > max ) val = max; \
else if ( val < min ) val = min; \
}
#if 0
#define USE_VGM_INIT_SWITCH
static UINT8 IsVGMInit = 0;
#endif
static UINT8 PseudoSt = 0x00;
/*#include <stdio.h>
static FILE* hFile;
static UINT32 FileSample;*/
/* status set and IRQ handling */
INLINE void FM_STATUS_SET(FM_ST *ST,int flag)
{
/* set status flag */
ST->status |= flag;
if ( !(ST->irq) && (ST->status & ST->irqmask) )
{
ST->irq = 1;
/* callback user interrupt handler (IRQ is OFF to ON) */
if(ST->IRQ_Handler) (ST->IRQ_Handler)(ST->param,1);
}
}
/* status reset and IRQ handling */
INLINE void FM_STATUS_RESET(FM_ST *ST,int flag)
{
/* reset status flag */
ST->status &=~flag;
if ( (ST->irq) && !(ST->status & ST->irqmask) )
{
ST->irq = 0;
/* callback user interrupt handler (IRQ is ON to OFF) */
if(ST->IRQ_Handler) (ST->IRQ_Handler)(ST->param,0);
}
}
/* IRQ mask set */
INLINE void FM_IRQMASK_SET(FM_ST *ST,int flag)
{
ST->irqmask = flag;
/* IRQ handling check */
FM_STATUS_SET(ST,0);
FM_STATUS_RESET(ST,0);
}
INLINE void FM_KEYON(FM_OPN *OPN, FM_CH *CH , int s )
{
FM_SLOT *SLOT = &CH->SLOT[s];
/* Note by Valley Bell:
I assume that the CSM mode shouldn't affect channels
other than FM3, so I added a check for it here.*/
if( !SLOT->key && (!OPN->SL3.key_csm || CH == &OPN->P_CH[3]))
{
/* restart Phase Generator */
SLOT->phase = 0;
/* reset SSG-EG inversion flag */
SLOT->ssgn = 0;
if ((SLOT->ar + SLOT->ksr) < 94 /*32+62*/)
{
SLOT->state = (SLOT->volume <= MIN_ATT_INDEX) ? ((SLOT->sl == MIN_ATT_INDEX) ? EG_SUS : EG_DEC) : EG_ATT;
}
else
{
/* force attenuation level to 0 */
SLOT->volume = MIN_ATT_INDEX;
/* directly switch to Decay (or Sustain) */
SLOT->state = (SLOT->sl == MIN_ATT_INDEX) ? EG_SUS : EG_DEC;
}
/* recalculate EG output */
if ((SLOT->ssg&0x08) && (SLOT->ssgn ^ (SLOT->ssg&0x04)))
SLOT->vol_out = ((UINT32)(0x200 - SLOT->volume) & MAX_ATT_INDEX) + SLOT->tl;
else
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
SLOT->key = 1;
}
INLINE void FM_KEYOFF(FM_OPN *OPN, FM_CH *CH , int s )
{
FM_SLOT *SLOT = &CH->SLOT[s];
if (SLOT->key && (!OPN->SL3.key_csm || CH == &OPN->P_CH[3]))
{
#ifdef USE_VGM_INIT_SWITCH
if (IsVGMInit) /* workaround for VGMs trimmed with VGMTool */
{
SLOT->state = EG_OFF;
SLOT->volume = MAX_ATT_INDEX;
SLOT->vol_out= MAX_ATT_INDEX;
}
else
#endif
if (SLOT->state>EG_REL)
{
SLOT->state = EG_REL; /* phase -> Release */
/* SSG-EG specific update */
if (SLOT->ssg&0x08)
{
/* convert EG attenuation level */
if (SLOT->ssgn ^ (SLOT->ssg&0x04))
SLOT->volume = (0x200 - SLOT->volume);
/* force EG attenuation level */
if (SLOT->volume >= 0x200)
{
SLOT->volume = MAX_ATT_INDEX;
SLOT->state = EG_OFF;
}
/* recalculate EG output */
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
}
}
SLOT->key = 0;
}
INLINE void FM_KEYON_CSM(FM_OPN *OPN, FM_CH *CH , int s )
{
FM_SLOT *SLOT = &CH->SLOT[s];
if( !SLOT->key && !OPN->SL3.key_csm)
{
/* restart Phase Generator */
SLOT->phase = 0;
/* reset SSG-EG inversion flag */
SLOT->ssgn = 0;
if ((SLOT->ar + SLOT->ksr) < 94 /*32+62*/)
{
SLOT->state = (SLOT->volume <= MIN_ATT_INDEX) ? ((SLOT->sl == MIN_ATT_INDEX) ? EG_SUS : EG_DEC) : EG_ATT;
}
else
{
/* force attenuation level to 0 */
SLOT->volume = MIN_ATT_INDEX;
/* directly switch to Decay (or Sustain) */
SLOT->state = (SLOT->sl == MIN_ATT_INDEX) ? EG_SUS : EG_DEC;
}
/* recalculate EG output */
if ((SLOT->ssg&0x08) && (SLOT->ssgn ^ (SLOT->ssg&0x04)))
SLOT->vol_out = ((UINT32)(0x200 - SLOT->volume) & MAX_ATT_INDEX) + SLOT->tl;
else
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
}
INLINE void FM_KEYOFF_CSM(FM_CH *CH , int s )
{
FM_SLOT *SLOT = &CH->SLOT[s];
if (!SLOT->key)
{
#ifdef USE_VGM_INIT_SWITCH
if (IsVGMInit)
{
SLOT->state = EG_OFF;
SLOT->volume = MAX_ATT_INDEX;
SLOT->vol_out= MAX_ATT_INDEX;
}
else
#endif
if (SLOT->state>EG_REL)
{
SLOT->state = EG_REL; /* phase -> Release */
/* SSG-EG specific update */
if (SLOT->ssg&0x08)
{
/* convert EG attenuation level */
if (SLOT->ssgn ^ (SLOT->ssg&0x04))
SLOT->volume = (0x200 - SLOT->volume);
/* force EG attenuation level */
if (SLOT->volume >= 0x200)
{
SLOT->volume = MAX_ATT_INDEX;
SLOT->state = EG_OFF;
}
/* recalculate EG output */
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
}
}
}
/* OPN Mode Register Write */
INLINE void set_timers( FM_OPN *OPN, FM_ST *ST, void *n, int v )
{
/* b7 = CSM MODE */
/* b6 = 3 slot mode */
/* b5 = reset b */
/* b4 = reset a */
/* b3 = timer enable b */
/* b2 = timer enable a */
/* b1 = load b */
/* b0 = load a */
if ((OPN->ST.mode ^ v) & 0xC0)
{
/* phase increment need to be recalculated */
OPN->P_CH[2].SLOT[SLOT1].Incr=-1;
/* CSM mode disabled and CSM key ON active*/
if (((v & 0xC0) != 0x80) && OPN->SL3.key_csm)
{
/* CSM Mode Key OFF (verified by Nemesis on real hardware) */
FM_KEYOFF_CSM(&OPN->P_CH[2],SLOT1);
FM_KEYOFF_CSM(&OPN->P_CH[2],SLOT2);
FM_KEYOFF_CSM(&OPN->P_CH[2],SLOT3);
FM_KEYOFF_CSM(&OPN->P_CH[2],SLOT4);
OPN->SL3.key_csm = 0;
}
}
/* reset Timer b flag */
if( v & 0x20 )
FM_STATUS_RESET(ST,0x02);
/* reset Timer a flag */
if( v & 0x10 )
FM_STATUS_RESET(ST,0x01);
/* load b */
if ((v&2) && !(ST->mode&2))
{
ST->TBC = ( 256-ST->TB)<<4;
/* External timer handler */
if (ST->timer_handler) (ST->timer_handler)(n,1,ST->TBC * ST->timer_prescaler,(int)ST->clock);
}
/* load a */
if ((v&1) && !(ST->mode&1))
{
ST->TAC = (1024-ST->TA);
/* External timer handler */
if (ST->timer_handler) (ST->timer_handler)(n,0,ST->TAC * ST->timer_prescaler,(int)ST->clock);
ST->TAC *= 4096;
}
ST->mode = (UINT32)v;
}
/* Timer A Overflow */
INLINE void TimerAOver(FM_ST *ST)
{
/* set status (if enabled) */
if(ST->mode & 0x04) FM_STATUS_SET(ST,0x01);
/* clear or reload the counter */
ST->TAC = (1024-ST->TA);
if (ST->timer_handler) (ST->timer_handler)(ST->param,0,ST->TAC * ST->timer_prescaler,(int)ST->clock);
ST->TAC *= 4096;
}
/* Timer B Overflow */
INLINE void TimerBOver(FM_ST *ST)
{
/* set status (if enabled) */
if(ST->mode & 0x08) FM_STATUS_SET(ST,0x02);
/* clear or reload the counter */
ST->TBC = ( 256-ST->TB)<<4;
if (ST->timer_handler) (ST->timer_handler)(ST->param,1,ST->TBC * ST->timer_prescaler,(int)ST->clock);
}
#if FM_INTERNAL_TIMER
/* ----- internal timer mode , update timer */
/* Valley Bell: defines fixed */
/* ---------- calculate timer A ---------- */
#define INTERNAL_TIMER_A(ST,CSM_CH) \
{ \
if( (ST)->TAC && ((ST)->timer_handler==0) ) \
if( ((ST)->TAC -= (int)((ST)->freqbase*4096)) <= 0 ) \
{ \
TimerAOver( ST ); \
/* CSM mode total level latch and auto key on */ \
if( (ST)->mode & 0x80 ) \
CSMKeyControll( OPN, CSM_CH ); \
} \
}
/* ---------- calculate timer B ---------- */
#define INTERNAL_TIMER_B(ST,step) \
{ \
if( (ST)->TBC && ((ST)->timer_handler==0) ) \
if( ((ST)->TBC -= (int)((ST)->freqbase*4096*step)) <= 0 ) \
TimerBOver( ST ); \
}
#else /* FM_INTERNAL_TIMER */
/* external timer mode */
#define INTERNAL_TIMER_A(ST,CSM_CH)
#define INTERNAL_TIMER_B(ST,step)
#endif /* FM_INTERNAL_TIMER */
#if FM_BUSY_FLAG_SUPPORT
#define FM_BUSY_CLEAR(ST) ((ST)->busy_expiry_time = UNDEFINED_TIME)
INLINE UINT8 FM_STATUS_FLAG(FM_ST *ST)
{
if( COMPARE_TIMES(ST->busy_expiry_time, UNDEFINED_TIME) != 0 )
{
if (COMPARE_TIMES(ST->busy_expiry_time, FM_GET_TIME_NOW(ST->device->machine)) > 0)
return ST->status | 0x80; /* with busy */
/* expire */
FM_BUSY_CLEAR(ST);
}
return ST->status;
}
INLINE void FM_BUSY_SET(FM_ST *ST,int busyclock )
{
TIME_TYPE expiry_period = MULTIPLY_TIME_BY_INT(ATTOTIME_IN_HZ(ST->clock), busyclock * ST->timer_prescaler);
ST->busy_expiry_time = ADD_TIMES(FM_GET_TIME_NOW(ST->device->machine), expiry_period);
}
#else
#define FM_STATUS_FLAG(ST) ((ST)->status)
#define FM_BUSY_SET(ST,bclock) {}
#define FM_BUSY_CLEAR(ST) {}
#endif
/* set algorithm connection */
INLINE void setup_connection( FM_OPN *OPN, FM_CH *CH, int ch )
{
INT32 *carrier = &OPN->out_fm[ch];
INT32 **om1 = &CH->connect1;
INT32 **om2 = &CH->connect3;
INT32 **oc1 = &CH->connect2;
INT32 **memc = &CH->mem_connect;
switch( CH->ALGO )
{
case 0:
/* M1---C1---MEM---M2---C2---OUT */
*om1 = &OPN->c1;
*oc1 = &OPN->mem;
*om2 = &OPN->c2;
*memc= &OPN->m2;
break;
case 1:
/* M1------+-MEM---M2---C2---OUT */
/* C1-+ */
*om1 = &OPN->mem;
*oc1 = &OPN->mem;
*om2 = &OPN->c2;
*memc= &OPN->m2;
break;
case 2:
/* M1-----------------+-C2---OUT */
/* C1---MEM---M2-+ */
*om1 = &OPN->c2;
*oc1 = &OPN->mem;
*om2 = &OPN->c2;
*memc= &OPN->m2;
break;
case 3:
/* M1---C1---MEM------+-C2---OUT */
/* M2-+ */
*om1 = &OPN->c1;
*oc1 = &OPN->mem;
*om2 = &OPN->c2;
*memc= &OPN->c2;
break;
case 4:
/* M1---C1-+-OUT */
/* M2---C2-+ */
/* MEM: not used */
*om1 = &OPN->c1;
*oc1 = carrier;
*om2 = &OPN->c2;
*memc= &OPN->mem; /* store it anywhere where it will not be used */
break;
case 5:
/* +----C1----+ */
/* M1-+-MEM---M2-+-OUT */
/* +----C2----+ */
*om1 = 0; /* special mark */
*oc1 = carrier;
*om2 = carrier;
*memc= &OPN->m2;
break;
case 6:
/* M1---C1-+ */
/* M2-+-OUT */
/* C2-+ */
/* MEM: not used */
*om1 = &OPN->c1;
*oc1 = carrier;
*om2 = carrier;
*memc= &OPN->mem; /* store it anywhere where it will not be used */
break;
case 7:
/* M1-+ */
/* C1-+-OUT */
/* M2-+ */
/* C2-+ */
/* MEM: not used*/
*om1 = carrier;
*oc1 = carrier;
*om2 = carrier;
*memc= &OPN->mem; /* store it anywhere where it will not be used */
break;
}
CH->connect4 = carrier;
}
/* set detune & multiple */
INLINE void set_det_mul(FM_ST *ST,FM_CH *CH,FM_SLOT *SLOT,int v)
{
SLOT->mul = (v&0x0f)? (v&0x0f)*2 : 1;
SLOT->DT = ST->dt_tab[(v>>4)&7];
CH->SLOT[SLOT1].Incr=-1;
}
/* set total level */
INLINE void set_tl(FM_CH *CH,FM_SLOT *SLOT , int v)
{
SLOT->tl = (v&0x7f)<<(ENV_BITS-7); /* 7bit TL */
(void)CH;
/* recalculate EG output */
if ((SLOT->ssg&0x08) && (SLOT->ssgn ^ (SLOT->ssg&0x04)) && (SLOT->state > EG_REL))
SLOT->vol_out = ((UINT32)(0x200 - SLOT->volume) & MAX_ATT_INDEX) + SLOT->tl;
else
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
/* set attack rate & key scale */
INLINE void set_ar_ksr(UINT8 type, FM_CH *CH,FM_SLOT *SLOT,int v)
{
UINT8 old_KSR = SLOT->KSR;
(void)type;
SLOT->ar = (v&0x1f) ? 32 + ((v&0x1f)<<1) : 0;
SLOT->KSR = 3-(v>>6);
if (SLOT->KSR != old_KSR)
{
CH->SLOT[SLOT1].Incr=-1;
}
/* Even if it seems unnecessary, in some odd case, KSR and KC are both modified */
/* and could result in SLOT->kc remaining unchanged. */
/* In such case, AR values would not be recalculated despite SLOT->ar has changed */
/* This fixes the introduction music of Batman & Robin (Eke-Eke) */
if ((SLOT->ar + SLOT->ksr) < 94 /*32+62*/)
{
SLOT->eg_sh_ar = eg_rate_shift [SLOT->ar + SLOT->ksr ];
SLOT->eg_sel_ar = eg_rate_select2612[SLOT->ar + SLOT->ksr ];
}
else
{
SLOT->eg_sh_ar = 0;
SLOT->eg_sel_ar = 18*RATE_STEPS; /* verified by Nemesis on real hardware */
}
}
/* set decay rate */
INLINE void set_dr(UINT8 type, FM_SLOT *SLOT,int v)
{
(void)type;
SLOT->d1r = (v&0x1f) ? 32 + ((v&0x1f)<<1) : 0;
SLOT->eg_sh_d1r = eg_rate_shift [SLOT->d1r + SLOT->ksr];
SLOT->eg_sel_d1r= eg_rate_select2612[SLOT->d1r + SLOT->ksr];
}
/* set sustain rate */
INLINE void set_sr(UINT8 type, FM_SLOT *SLOT,int v)
{
(void)type;
SLOT->d2r = (v&0x1f) ? 32 + ((v&0x1f)<<1) : 0;
SLOT->eg_sh_d2r = eg_rate_shift [SLOT->d2r + SLOT->ksr];
SLOT->eg_sel_d2r= eg_rate_select2612[SLOT->d2r + SLOT->ksr];
}
/* set release rate */
INLINE void set_sl_rr(UINT8 type, FM_SLOT *SLOT,int v)
{
(void)type;
SLOT->sl = sl_table[ v>>4 ];
/* check EG state changes */
if ((SLOT->state == EG_DEC) && (SLOT->volume >= (INT32)(SLOT->sl)))
SLOT->state = EG_SUS;
SLOT->rr = 34 + ((v&0x0f)<<2);
SLOT->eg_sh_rr = eg_rate_shift [SLOT->rr + SLOT->ksr];
SLOT->eg_sel_rr = eg_rate_select2612[SLOT->rr + SLOT->ksr];
}
/* advance LFO to next sample */
INLINE void advance_lfo(FM_OPN *OPN)
{
if (OPN->lfo_timer_overflow) /* LFO enabled ? */
{
/* increment LFO timer */
OPN->lfo_timer += OPN->lfo_timer_add;
/* when LFO is enabled, one level will last for 108, 77, 71, 67, 62, 44, 8 or 5 samples */
while (OPN->lfo_timer >= OPN->lfo_timer_overflow)
{
OPN->lfo_timer -= OPN->lfo_timer_overflow;
/* There are 128 LFO steps */
OPN->lfo_cnt = ( OPN->lfo_cnt + 1 ) & 127;
/* Valley Bell: Replaced old code (non-inverted triangle) with
the one from Genesis Plus GX 1.71. */
/* triangle (inverted) */
/* AM: from 126 to 0 step -2, 0 to 126 step +2 */
if (OPN->lfo_cnt<64)
OPN->LFO_AM = (UINT32)(OPN->lfo_cnt ^ 63) << 1;
else
OPN->LFO_AM = (UINT32)(OPN->lfo_cnt & 63) << 1;
/* PM works with 4 times slower clock */
OPN->LFO_PM = OPN->lfo_cnt >> 2;
}
}
}
INLINE void advance_eg_channel(FM_OPN *OPN, FM_SLOT *SLOT)
{
/* unsigned int out; */
unsigned int i = 4; /* four operators per channel */
do
{
switch(SLOT->state)
{
case EG_ATT: /* attack phase */
if (!(OPN->eg_cnt & ((1<<SLOT->eg_sh_ar)-1)))
{
/* update attenuation level */
SLOT->volume += (~SLOT->volume * (eg_inc[SLOT->eg_sel_ar + ((OPN->eg_cnt>>SLOT->eg_sh_ar)&7)]))>>4;
/* check phase transition*/
if (SLOT->volume <= MIN_ATT_INDEX)
{
SLOT->volume = MIN_ATT_INDEX;
SLOT->state = (SLOT->sl == MIN_ATT_INDEX) ? EG_SUS : EG_DEC; /* special case where SL=0 */
}
/* recalculate EG output */
if ((SLOT->ssg&0x08) && (SLOT->ssgn ^ (SLOT->ssg&0x04))) /* SSG-EG Output Inversion */
SLOT->vol_out = ((UINT32)(0x200 - SLOT->volume) & MAX_ATT_INDEX) + SLOT->tl;
else
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
break;
case EG_DEC: /* decay phase */
if (!(OPN->eg_cnt & ((1<<SLOT->eg_sh_d1r)-1)))
{
/* SSG EG type */
if (SLOT->ssg&0x08)
{
/* update attenuation level */
if (SLOT->volume < 0x200)
{
SLOT->volume += 4 * eg_inc[SLOT->eg_sel_d1r + ((OPN->eg_cnt>>SLOT->eg_sh_d1r)&7)];
/* recalculate EG output */
if (SLOT->ssgn ^ (SLOT->ssg&0x04)) /* SSG-EG Output Inversion */
SLOT->vol_out = ((UINT32)(0x200 - SLOT->volume) & MAX_ATT_INDEX) + SLOT->tl;
else
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
}
else
{
/* update attenuation level */
SLOT->volume += eg_inc[SLOT->eg_sel_d1r + ((OPN->eg_cnt>>SLOT->eg_sh_d1r)&7)];
/* recalculate EG output */
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
/* check phase transition*/
if (SLOT->volume >= (INT32)(SLOT->sl))
SLOT->state = EG_SUS;
}
break;
case EG_SUS: /* sustain phase */
if (!(OPN->eg_cnt & ((1<<SLOT->eg_sh_d2r)-1)))
{
/* SSG EG type */
if (SLOT->ssg&0x08)
{
/* update attenuation level */
if (SLOT->volume < 0x200)
{
SLOT->volume += 4 * eg_inc[SLOT->eg_sel_d2r + ((OPN->eg_cnt>>SLOT->eg_sh_d2r)&7)];
/* recalculate EG output */
if (SLOT->ssgn ^ (SLOT->ssg&0x04)) /* SSG-EG Output Inversion */
SLOT->vol_out = ((UINT32)(0x200 - SLOT->volume) & MAX_ATT_INDEX) + SLOT->tl;
else
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
}
else
{
/* update attenuation level */
SLOT->volume += eg_inc[SLOT->eg_sel_d2r + ((OPN->eg_cnt>>SLOT->eg_sh_d2r)&7)];
/* check phase transition*/
if ( SLOT->volume >= MAX_ATT_INDEX )
SLOT->volume = MAX_ATT_INDEX;
/* do not change SLOT->state (verified on real chip) */
/* recalculate EG output */
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
}
break;
case EG_REL: /* release phase */
if (!(OPN->eg_cnt & ((1<<SLOT->eg_sh_rr)-1)))
{
/* SSG EG type */
if (SLOT->ssg&0x08)
{
/* update attenuation level */
if (SLOT->volume < 0x200)
SLOT->volume += 4 * eg_inc[SLOT->eg_sel_rr + ((OPN->eg_cnt>>SLOT->eg_sh_rr)&7)];
/* check phase transition */
if (SLOT->volume >= 0x200)
{
SLOT->volume = MAX_ATT_INDEX;
SLOT->state = EG_OFF;
}
}
else
{
/* update attenuation level */
SLOT->volume += eg_inc[SLOT->eg_sel_rr + ((OPN->eg_cnt>>SLOT->eg_sh_rr)&7)];
/* check phase transition*/
if (SLOT->volume >= MAX_ATT_INDEX)
{
SLOT->volume = MAX_ATT_INDEX;
SLOT->state = EG_OFF;
}
}
/* recalculate EG output */
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
break;
}
/* Valley Bell: These few lines are missing in Genesis Plus GX' ym2612 core file.
Disabling them fixes the SSG-EG.
Additional Note: Asterix and the Great Rescue: Level 1 sounds "better" with these lines,
but less accurate. */
#if 0
out = ((UINT32)SLOT->volume);
/* negate output (changes come from alternate bit, init comes from attack bit) */
if ((SLOT->ssg&0x08) && (SLOT->ssgn&2) && (SLOT->state > EG_REL))
out ^= MAX_ATT_INDEX;
/* we need to store the result here because we are going to change ssgn
in next instruction */
SLOT->vol_out = out + SLOT->tl;
#endif
SLOT++;
i--;
} while (i);
}
/* SSG-EG update process */
/* The behavior is based upon Nemesis tests on real hardware */
/* This is actually executed before each samples */
INLINE void update_ssg_eg_channel(FM_SLOT *SLOT)
{
unsigned int i = 4; /* four operators per channel */
do
{
/* detect SSG-EG transition */
/* this is not required during release phase as the attenuation has been forced to MAX and output invert flag is not used */
/* if an Attack Phase is programmed, inversion can occur on each sample */
if ((SLOT->ssg & 0x08) && (SLOT->volume >= 0x200) && (SLOT->state > EG_REL))
{
if (SLOT->ssg & 0x01) /* bit 0 = hold SSG-EG */
{
/* set inversion flag */
if (SLOT->ssg & 0x02)
SLOT->ssgn = 4;
/* force attenuation level during decay phases */
if ((SLOT->state != EG_ATT) && !(SLOT->ssgn ^ (SLOT->ssg & 0x04)))
SLOT->volume = MAX_ATT_INDEX;
}
else /* loop SSG-EG */
{
/* toggle output inversion flag or reset Phase Generator */
if (SLOT->ssg & 0x02)
SLOT->ssgn ^= 4;
else
SLOT->phase = 0;
/* same as Key ON */
if (SLOT->state != EG_ATT)
{
if ((SLOT->ar + SLOT->ksr) < 94 /*32+62*/)
{
SLOT->state = (SLOT->volume <= MIN_ATT_INDEX) ? ((SLOT->sl == MIN_ATT_INDEX) ? EG_SUS : EG_DEC) : EG_ATT;
}
else
{
/* Attack Rate is maximal: directly switch to Decay or Substain */
SLOT->volume = MIN_ATT_INDEX;
SLOT->state = (SLOT->sl == MIN_ATT_INDEX) ? EG_SUS : EG_DEC;
}
}
}
/* recalculate EG output */
if (SLOT->ssgn ^ (SLOT->ssg&0x04))
SLOT->vol_out = ((UINT32)(0x200 - SLOT->volume) & MAX_ATT_INDEX) + SLOT->tl;
else
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
/* next slot */
SLOT++;
i--;
} while (i);
}
INLINE void update_phase_lfo_slot(FM_OPN *OPN, FM_SLOT *SLOT, INT32 pms, UINT32 block_fnum)
{
UINT32 fnum_lfo = ((block_fnum & 0x7f0) >> 4) * 32 * 8;
INT32 lfo_fn_table_index_offset = lfo_pm_table[ fnum_lfo + pms + OPN->LFO_PM ];
block_fnum = block_fnum*2 + lfo_fn_table_index_offset;
if (lfo_fn_table_index_offset) /* LFO phase modulation active */
{
UINT8 blk = (block_fnum&0x7000) >> 12;
UINT32 fn = block_fnum & 0xfff;
/* recalculate keyscale code */
/*int kc = (blk<<2) | opn_fktable[fn >> 7];*/
/* This really stupid bug caused a read outside of the
array [size 0x10] and returned invalid values.
This caused an annoying vibrato for some notes.
(Note: seems to be a copy-and-paste from OPNWriteReg -> case 0xA0)
Why are MAME cores always SOO buggy ?! */
/* Oh, and before I forget: it's correct in fm.c */
int kc = (blk<<2) | opn_fktable[fn >> 8];
/* Thanks to Blargg - his patch that helped me to find this bug */
/* recalculate (frequency) phase increment counter */
int fc = (OPN->fn_table[fn]>>(7-blk)) + SLOT->DT[kc];
/* (frequency) phase overflow (credits to Nemesis) */
if (fc < 0) fc += OPN->fn_max;
/* update phase */
SLOT->phase += (fc * SLOT->mul) >> 1;
}
else /* LFO phase modulation = zero */
{
SLOT->phase += SLOT->Incr;
}
}
INLINE void update_phase_lfo_channel(FM_OPN *OPN, FM_CH *CH)
{
UINT32 block_fnum = CH->block_fnum;
UINT32 fnum_lfo = ((block_fnum & 0x7f0) >> 4) * 32 * 8;
INT32 lfo_fn_table_index_offset = lfo_pm_table[ fnum_lfo + CH->pms + OPN->LFO_PM ];
block_fnum = block_fnum*2 + lfo_fn_table_index_offset;
if (lfo_fn_table_index_offset) /* LFO phase modulation active */
{
UINT8 blk = (block_fnum&0x7000) >> 12;
UINT32 fn = block_fnum & 0xfff;
/* recalculate keyscale code */
/*int kc = (blk<<2) | opn_fktable[fn >> 7];*/
/* the same stupid bug as above */
int kc = (blk<<2) | opn_fktable[fn >> 8];
/* recalculate (frequency) phase increment counter */
int fc = (OPN->fn_table[fn]>>(7-blk));
/* (frequency) phase overflow (credits to Nemesis) */
int finc = fc + CH->SLOT[SLOT1].DT[kc];
if (finc < 0) finc += OPN->fn_max;
CH->SLOT[SLOT1].phase += (finc*CH->SLOT[SLOT1].mul) >> 1;
finc = fc + CH->SLOT[SLOT2].DT[kc];
if (finc < 0) finc += OPN->fn_max;
CH->SLOT[SLOT2].phase += (finc*CH->SLOT[SLOT2].mul) >> 1;
finc = fc + CH->SLOT[SLOT3].DT[kc];
if (finc < 0) finc += OPN->fn_max;
CH->SLOT[SLOT3].phase += (finc*CH->SLOT[SLOT3].mul) >> 1;
finc = fc + CH->SLOT[SLOT4].DT[kc];
if (finc < 0) finc += OPN->fn_max;
CH->SLOT[SLOT4].phase += (finc*CH->SLOT[SLOT4].mul) >> 1;
}
else /* LFO phase modulation = zero */
{
CH->SLOT[SLOT1].phase += CH->SLOT[SLOT1].Incr;
CH->SLOT[SLOT2].phase += CH->SLOT[SLOT2].Incr;
CH->SLOT[SLOT3].phase += CH->SLOT[SLOT3].Incr;
CH->SLOT[SLOT4].phase += CH->SLOT[SLOT4].Incr;
}
}
/* update phase increment and envelope generator */
INLINE void refresh_fc_eg_slot(FM_OPN *OPN, FM_SLOT *SLOT , int fc , int kc )
{
int ksr = kc >> SLOT->KSR;
fc += SLOT->DT[kc];
/* detects frequency overflow (credits to Nemesis) */
if (fc < 0) fc += OPN->fn_max;
/* (frequency) phase increment counter */
SLOT->Incr = (fc * SLOT->mul) >> 1;
if( SLOT->ksr != ksr )
{
SLOT->ksr = ksr;
/* calculate envelope generator rates */
if ((SLOT->ar + SLOT->ksr) < 32+62)
{
SLOT->eg_sh_ar = eg_rate_shift [SLOT->ar + SLOT->ksr ];
SLOT->eg_sel_ar = eg_rate_select2612[SLOT->ar + SLOT->ksr ];
}
else
{
SLOT->eg_sh_ar = 0;
SLOT->eg_sel_ar = 18*RATE_STEPS; /* verified by Nemesis on real hardware (Attack phase is blocked) */
}
SLOT->eg_sh_d1r = eg_rate_shift [SLOT->d1r + SLOT->ksr];
SLOT->eg_sh_d2r = eg_rate_shift [SLOT->d2r + SLOT->ksr];
SLOT->eg_sh_rr = eg_rate_shift [SLOT->rr + SLOT->ksr];
SLOT->eg_sel_d1r= eg_rate_select2612[SLOT->d1r + SLOT->ksr];
SLOT->eg_sel_d2r= eg_rate_select2612[SLOT->d2r + SLOT->ksr];
SLOT->eg_sel_rr = eg_rate_select2612[SLOT->rr + SLOT->ksr];
}
}
/* update phase increment counters */
INLINE void refresh_fc_eg_chan(FM_OPN *OPN, FM_CH *CH )
{
if( CH->SLOT[SLOT1].Incr==-1)
{
int fc = CH->fc;
int kc = CH->kcode;
refresh_fc_eg_slot(OPN, &CH->SLOT[SLOT1] , fc , kc );
refresh_fc_eg_slot(OPN, &CH->SLOT[SLOT2] , fc , kc );
refresh_fc_eg_slot(OPN, &CH->SLOT[SLOT3] , fc , kc );
refresh_fc_eg_slot(OPN, &CH->SLOT[SLOT4] , fc , kc );
}
}
#define volume_calc(OP) ((OP)->vol_out + (AM & (OP)->AMmask))
INLINE signed int op_calc(UINT32 phase, unsigned int env, signed int pm)
{
UINT32 p;
p = (env<<3) + sin_tab[ ( ((signed int)((phase & ~FREQ_MASK) + (pm<<15))) >> FREQ_SH ) & SIN_MASK ];
if (p >= TL_TAB_LEN)
return 0;
return tl_tab[p];
}
INLINE signed int op_calc1(UINT32 phase, unsigned int env, signed int pm)
{
UINT32 p = (env<<3) + sin_tab[ ( ((signed int)((phase & ~FREQ_MASK) + pm )) >> FREQ_SH ) & SIN_MASK ];
if (p >= TL_TAB_LEN)
return 0;
return tl_tab[p];
}
INLINE void chan_calc(YM2612 *F2612, FM_OPN *OPN, FM_CH *CH)
{
UINT32 AM = OPN->LFO_AM >> CH->ams;
unsigned int eg_out;
if (CH->Muted)
return;
OPN->m2 = OPN->c1 = OPN->c2 = OPN->mem = 0;
*CH->mem_connect = CH->mem_value; /* restore delayed sample (MEM) value to m2 or c2 */
eg_out = volume_calc(&CH->SLOT[SLOT1]);
{
INT32 out = CH->op1_out[0] + CH->op1_out[1];
CH->op1_out[0] = CH->op1_out[1];
if( !CH->connect1 )
{
/* algorithm 5 */
OPN->mem = OPN->c1 = OPN->c2 = CH->op1_out[0];
}
else
{
/* other algorithms */
*CH->connect1 += CH->op1_out[0];
}
CH->op1_out[1] = 0;
if( eg_out < ENV_QUIET ) /* SLOT 1 */
{
if (!CH->FB)
out=0;
CH->op1_out[1] = op_calc1(CH->SLOT[SLOT1].phase, eg_out, (out<<CH->FB) );
}
}
eg_out = volume_calc(&CH->SLOT[SLOT3]);
if( eg_out < ENV_QUIET ) /* SLOT 3 */
*CH->connect3 += op_calc(CH->SLOT[SLOT3].phase, eg_out, OPN->m2);
eg_out = volume_calc(&CH->SLOT[SLOT2]);
if( eg_out < ENV_QUIET ) /* SLOT 2 */
*CH->connect2 += op_calc(CH->SLOT[SLOT2].phase, eg_out, OPN->c1);
eg_out = volume_calc(&CH->SLOT[SLOT4]);
if( eg_out < ENV_QUIET ) /* SLOT 4 */
*CH->connect4 += op_calc(CH->SLOT[SLOT4].phase, eg_out, OPN->c2);
/* store current MEM */
CH->mem_value = OPN->mem;
/* update phase counters AFTER output calculations */
if(CH->pms)
{
/* add support for 3 slot mode */
if ((OPN->ST.mode & 0xC0) && (CH == &F2612->CH[2]))
{
update_phase_lfo_slot(OPN, &CH->SLOT[SLOT1], CH->pms, OPN->SL3.block_fnum[1]);
update_phase_lfo_slot(OPN, &CH->SLOT[SLOT2], CH->pms, OPN->SL3.block_fnum[2]);
update_phase_lfo_slot(OPN, &CH->SLOT[SLOT3], CH->pms, OPN->SL3.block_fnum[0]);
update_phase_lfo_slot(OPN, &CH->SLOT[SLOT4], CH->pms, CH->block_fnum);
}
else update_phase_lfo_channel(OPN, CH);
}
else /* no LFO phase modulation */
{
CH->SLOT[SLOT1].phase += CH->SLOT[SLOT1].Incr;
CH->SLOT[SLOT2].phase += CH->SLOT[SLOT2].Incr;
CH->SLOT[SLOT3].phase += CH->SLOT[SLOT3].Incr;
CH->SLOT[SLOT4].phase += CH->SLOT[SLOT4].Incr;
}
}
static void FMCloseTable( void )
{
#ifdef SAVE_SAMPLE
fclose(sample[0]);
#endif
return;
}
/* CSM Key Controll */
INLINE void CSMKeyControll(FM_OPN *OPN, FM_CH *CH)
{
/* all key ON (verified by Nemesis on real hardware) */
FM_KEYON_CSM(OPN,CH,SLOT1);
FM_KEYON_CSM(OPN,CH,SLOT2);
FM_KEYON_CSM(OPN,CH,SLOT3);
FM_KEYON_CSM(OPN,CH,SLOT4);
OPN->SL3.key_csm = 1;
}
#ifdef __STATE_H__
/* FM channel save , internal state only */
static void FMsave_state_channel(running_device *device,FM_CH *CH,int num_ch)
{
int slot , ch;
for(ch=0;ch<num_ch;ch++,CH++)
{
/* channel */
state_save_register_device_item_array(device, ch, CH->op1_out);
state_save_register_device_item(device, ch, CH->fc);
/* slots */
for(slot=0;slot<4;slot++)
{
FM_SLOT *SLOT = &CH->SLOT[slot];
state_save_register_device_item(device, ch * 4 + slot, SLOT->phase);
state_save_register_device_item(device, ch * 4 + slot, SLOT->state);
state_save_register_device_item(device, ch * 4 + slot, SLOT->volume);
}
}
}
static void FMsave_state_st(running_device *device,FM_ST *ST)
{
#if FM_BUSY_FLAG_SUPPORT
state_save_register_device_item(device, 0, ST->busy_expiry_time.seconds );
state_save_register_device_item(device, 0, ST->busy_expiry_time.attoseconds );
#endif
state_save_register_device_item(device, 0, ST->address );
state_save_register_device_item(device, 0, ST->irq );
state_save_register_device_item(device, 0, ST->irqmask );
state_save_register_device_item(device, 0, ST->status );
state_save_register_device_item(device, 0, ST->mode );
state_save_register_device_item(device, 0, ST->prescaler_sel );
state_save_register_device_item(device, 0, ST->fn_h );
state_save_register_device_item(device, 0, ST->TA );
state_save_register_device_item(device, 0, ST->TAC );
state_save_register_device_item(device, 0, ST->TB );
state_save_register_device_item(device, 0, ST->TBC );
}
#endif /* _STATE_H */
#if BUILD_OPN
/* write a OPN mode register 0x20-0x2f */
static void OPNWriteMode(FM_OPN *OPN, int r, int v)
{
UINT8 c;
FM_CH *CH;
switch(r)
{
case 0x21: /* Test */
break;
case 0x22: /* LFO FREQ (YM2608/YM2610/YM2610B/YM2612) */
if (v&8) /* LFO enabled ? */
{
#if 0
if (!OPN->lfo_timer_overflow)
{
/* restart LFO */
OPN->lfo_cnt = 0;
OPN->lfo_timer = 0;
OPN->LFO_AM = 0;
OPN->LFO_PM = 0;
}
#endif
OPN->lfo_timer_overflow = lfo_samples_per_step[v&7] << LFO_SH;
}
else
{
/* Valley Bell: Ported from Genesis Plus GX 1.71
hold LFO waveform in reset state */
OPN->lfo_timer_overflow = 0;
OPN->lfo_timer = 0;
OPN->lfo_cnt = 0;
OPN->LFO_PM = 0;
OPN->LFO_AM = 126;
/* OPN->lfo_timer_overflow = 0; */
}
break;
case 0x24: /* timer A High 8*/
OPN->ST.TA = (OPN->ST.TA & 0x03)|(((int)v)<<2);
break;
case 0x25: /* timer A Low 2*/
OPN->ST.TA = (OPN->ST.TA & 0x3fc)|(v&3);
break;
case 0x26: /* timer B */
OPN->ST.TB = (UINT8)v;
break;
case 0x27: /* mode, timer control */
set_timers( OPN, &(OPN->ST),OPN->ST.param,v );
break;
case 0x28: /* key on / off */
c = v & 0x03;
if( c == 3 ) break;
if( (v&0x04) && (OPN->type & TYPE_6CH) ) c+=3;
CH = OPN->P_CH;
CH = &CH[c];
if(v&0x10) FM_KEYON(OPN,CH,SLOT1); else FM_KEYOFF(OPN,CH,SLOT1);
if(v&0x20) FM_KEYON(OPN,CH,SLOT2); else FM_KEYOFF(OPN,CH,SLOT2);
if(v&0x40) FM_KEYON(OPN,CH,SLOT3); else FM_KEYOFF(OPN,CH,SLOT3);
if(v&0x80) FM_KEYON(OPN,CH,SLOT4); else FM_KEYOFF(OPN,CH,SLOT4);
break;
}
}
/* write a OPN register (0x30-0xff) */
static void OPNWriteReg(FM_OPN *OPN, int r, int v)
{
FM_CH *CH;
FM_SLOT *SLOT;
UINT8 c = OPN_CHAN(r);
if (c == 3) return; /* 0xX3,0xX7,0xXB,0xXF */
if (r >= 0x100) c+=3;
CH = OPN->P_CH;
CH = &CH[c];
SLOT = &(CH->SLOT[OPN_SLOT(r)]);
switch( r & 0xf0 ) {
case 0x30: /* DET , MUL */
set_det_mul(&OPN->ST,CH,SLOT,v);
break;
case 0x40: /* TL */
set_tl(CH,SLOT,v);
break;
case 0x50: /* KS, AR */
set_ar_ksr(OPN->type,CH,SLOT,v);
break;
case 0x60: /* bit7 = AM ENABLE, DR */
set_dr(OPN->type, SLOT,v);
if(OPN->type & TYPE_LFOPAN) /* YM2608/2610/2610B/2612 */
{
SLOT->AMmask = (v&0x80) ? ~0 : 0;
}
break;
case 0x70: /* SR */
set_sr(OPN->type,SLOT,v);
break;
case 0x80: /* SL, RR */
set_sl_rr(OPN->type,SLOT,v);
break;
case 0x90: /* SSG-EG */
SLOT->ssg = v&0x0f;
/* recalculate EG output */
if (SLOT->state > EG_REL)
{
if ((SLOT->ssg&0x08) && (SLOT->ssgn ^ (SLOT->ssg&0x04)))
SLOT->vol_out = ((UINT32)(0x200 - SLOT->volume) & MAX_ATT_INDEX) + SLOT->tl;
else
SLOT->vol_out = (UINT32)SLOT->volume + SLOT->tl;
}
/* SSG-EG envelope shapes :
E AtAlH
1 0 0 0 \\\\
1 0 0 1 \___
1 0 1 0 \/\/
___
1 0 1 1 \
1 1 0 0 ////
___
1 1 0 1 /
1 1 1 0 /\/\
1 1 1 1 /___
E = SSG-EG enable
The shapes are generated using Attack, Decay and Sustain phases.
Each single character in the diagrams above represents this whole
sequence:
- when KEY-ON = 1, normal Attack phase is generated (*without* any
difference when compared to normal mode),
- later, when envelope level reaches minimum level (max volume),
the EG switches to Decay phase (which works with bigger steps
when compared to normal mode - see below),
- later when envelope level passes the SL level,
the EG swithes to Sustain phase (which works with bigger steps
when compared to normal mode - see below),
- finally when envelope level reaches maximum level (min volume),
the EG switches to Attack phase again (depends on actual waveform).
Important is that when switch to Attack phase occurs, the phase counter
of that operator will be zeroed-out (as in normal KEY-ON) but not always.
(I havent found the rule for that - perhaps only when the output level is low)
The difference (when compared to normal Envelope Generator mode) is
that the resolution in Decay and Sustain phases is 4 times lower;
this results in only 256 steps instead of normal 1024.
In other words:
when SSG-EG is disabled, the step inside of the EG is one,
when SSG-EG is enabled, the step is four (in Decay and Sustain phases).
Times between the level changes are the same in both modes.
Important:
Decay 1 Level (so called SL) is compared to actual SSG-EG output, so
it is the same in both SSG and no-SSG modes, with this exception:
when the SSG-EG is enabled and is generating raising levels
(when the EG output is inverted) the SL will be found at wrong level !!!
For example, when SL=02:
0 -6 = -6dB in non-inverted EG output
96-6 = -90dB in inverted EG output
Which means that EG compares its level to SL as usual, and that the
output is simply inverted afterall.
The Yamaha's manuals say that AR should be set to 0x1f (max speed).
That is not necessary, but then EG will be generating Attack phase.
*/
break;
case 0xa0:
switch( OPN_SLOT(r) )
{
case 0: /* 0xa0-0xa2 : FNUM1 */
#ifdef USE_VGM_INIT_SWITCH
if (IsVGMInit)
OPN->ST.fn_h = CH->block_fnum >> 8;
#endif
{
UINT32 fn = (((UINT32)( (OPN->ST.fn_h)&7))<<8) + v;
UINT8 blk = OPN->ST.fn_h>>3;
/* keyscale code */
CH->kcode = (blk<<2) | opn_fktable[fn >> 7];
/* phase increment counter */
CH->fc = OPN->fn_table[fn*2]>>(7-blk);
/* store fnum in clear form for LFO PM calculations */
CH->block_fnum = (blk<<11) | fn;
CH->SLOT[SLOT1].Incr=-1;
}
break;
case 1: /* 0xa4-0xa6 : FNUM2,BLK */
OPN->ST.fn_h = v&0x3f;
#ifdef USE_VGM_INIT_SWITCH
if (IsVGMInit) // workaround for stupid Kega Fusion init block
CH->block_fnum = (OPN->ST.fn_h << 8) | (CH->block_fnum & 0xFF);
#endif
break;
case 2: /* 0xa8-0xaa : 3CH FNUM1 */
#ifdef USE_VGM_INIT_SWITCH
if (IsVGMInit)
OPN->SL3.fn_h = OPN->SL3.block_fnum[c] >> 8;
#endif
if(r < 0x100)
{
UINT32 fn = (((UINT32)(OPN->SL3.fn_h&7))<<8) + v;
UINT8 blk = OPN->SL3.fn_h>>3;
/* keyscale code */
OPN->SL3.kcode[c]= (blk<<2) | opn_fktable[fn >> 7];
/* phase increment counter */
OPN->SL3.fc[c] = OPN->fn_table[fn*2]>>(7-blk);
OPN->SL3.block_fnum[c] = (blk<<11) | fn;
(OPN->P_CH)[2].SLOT[SLOT1].Incr=-1;
}
break;
case 3: /* 0xac-0xae : 3CH FNUM2,BLK */
if(r < 0x100)
{
OPN->SL3.fn_h = v&0x3f;
#ifdef USE_VGM_INIT_SWITCH
if (IsVGMInit)
OPN->SL3.block_fnum[c] = (OPN->SL3.fn_h << 8) | (OPN->SL3.block_fnum[c] & 0xFF);
#endif
}
break;
}
break;
case 0xb0:
switch( OPN_SLOT(r) )
{
case 0: /* 0xb0-0xb2 : FB,ALGO */
{
unsigned char feedback = ((v>>3)&7);
CH->ALGO = v&7;
CH->FB = feedback ? feedback + 6 : 0;
setup_connection( OPN, CH, c );
}
break;
case 1: /* 0xb4-0xb6 : L , R , AMS , PMS (YM2612/YM2610B/YM2610/YM2608) */
if( OPN->type & TYPE_LFOPAN)
{
/* b0-2 PMS */
CH->pms = (v & 7) * 32; /* CH->pms = PM depth * 32 (index in lfo_pm_table) */
/* b4-5 AMS */
CH->ams = lfo_ams_depth_shift[(v>>4) & 0x03];
/* PAN : b7 = L, b6 = R */
OPN->pan[ c*2 ] = (v & 0x80) ? ~0 : 0;
OPN->pan[ c*2+1 ] = (v & 0x40) ? ~0 : 0;
}
break;
}
break;
}
}
/* initialize time tables */
static void init_timetables(FM_OPN *OPN, double freqbase)
{
int i,d;
double rate;
/* DeTune table */
for (d = 0;d <= 3;d++)
{
for (i = 0;i <= 31;i++)
{
rate = ((double)dt_tab[d*32 + i]) * freqbase * (1<<(FREQ_SH-10)); /* -10 because chip works with 10.10 fixed point, while we use 16.16 */
OPN->ST.dt_tab[d][i] = (INT32) rate;
OPN->ST.dt_tab[d+4][i] = -OPN->ST.dt_tab[d][i];
}
}
/* there are 2048 FNUMs that can be generated using FNUM/BLK registers
but LFO works with one more bit of a precision so we really need 4096 elements */
/* calculate fnumber -> increment counter table */
for(i = 0; i < 4096; i++)
{
/* freq table for octave 7 */
/* OPN phase increment counter = 20bit */
/* the correct formula is : F-Number = (144 * fnote * 2^20 / M) / 2^(B-1) */
/* where sample clock is M/144 */
/* this means the increment value for one clock sample is FNUM * 2^(B-1) = FNUM * 64 for octave 7 */
/* we also need to handle the ratio between the chip frequency and the emulated frequency (can be 1.0) */
OPN->fn_table[i] = (UINT32)( (double)i * 32 * freqbase * (1<<(FREQ_SH-10)) ); /* -10 because chip works with 10.10 fixed point, while we use 16.16 */
}
/* maximal frequency is required for Phase overflow calculation, register size is 17 bits (Nemesis) */
OPN->fn_max = (UINT32)( (double)0x20000 * freqbase * (1<<(FREQ_SH-10)) );
}
/* prescaler set (and make time tables) */
static void OPNSetPres(FM_OPN *OPN, int pres, int timer_prescaler, int SSGpres)
{
/* frequency base */
OPN->ST.freqbase = (OPN->ST.rate) ? ((double)OPN->ST.clock / OPN->ST.rate) / pres : 0;
/* EG is updated every 3 samples */
OPN->eg_timer_add = (UINT32)((1<<EG_SH) * OPN->ST.freqbase);
OPN->eg_timer_overflow = ( 3 ) * (1<<EG_SH);
/* LFO timer increment (every samples) */
OPN->lfo_timer_add = (UINT32)((1<<LFO_SH) * OPN->ST.freqbase);
/* Timer base time */
OPN->ST.timer_prescaler = timer_prescaler;
/* SSG part prescaler set */
if( SSGpres ) (*OPN->ST.SSG->set_clock)( OPN->ST.param, OPN->ST.clock * 2 / SSGpres );
/* make time tables */
init_timetables(OPN, OPN->ST.freqbase);
}
static void reset_channels( FM_ST *ST , FM_CH *CH , int num )
{
int c,s;
(void)ST;
for( c = 0 ; c < num ; c++ )
{
/* memset(&CH[c], 0x00, sizeof(FM_CH)); */
CH[c].mem_value = 0;
CH[c].op1_out[0] = 0;
CH[c].op1_out[1] = 0;
CH[c].fc = 0;
for(s = 0 ; s < 4 ; s++ )
{
/* memset(&CH[c].SLOT[s], 0x00, sizeof(FM_SLOT)); */
CH[c].SLOT[s].Incr = -1;
CH[c].SLOT[s].key = 0;
CH[c].SLOT[s].phase = 0;
CH[c].SLOT[s].ssg = 0;
CH[c].SLOT[s].ssgn = 0;
CH[c].SLOT[s].state= EG_OFF;
CH[c].SLOT[s].volume = MAX_ATT_INDEX;
CH[c].SLOT[s].vol_out= MAX_ATT_INDEX;
}
}
}
/* initialize generic tables */
static void init_tables(void)
{
signed int i,x;
signed int n;
double o,m;
/* build Linear Power Table */
for (x=0; x<TL_RES_LEN; x++)
{
m = (1<<16) / pow(2, (x+1) * (ENV_STEP/4.0) / 8.0);
m = floor(m);
/* we never reach (1<<16) here due to the (x+1) */
/* result fits within 16 bits at maximum */
n = (int)m; /* 16 bits here */
n >>= 4; /* 12 bits here */
if (n&1) /* round to nearest */
n = (n>>1)+1;
else
n = n>>1;
/* 11 bits here (rounded) */
n <<= 2; /* 13 bits here (as in real chip) */
/* 14 bits (with sign bit) */
tl_tab[ x*2 + 0 ] = n;
tl_tab[ x*2 + 1 ] = -tl_tab[ x*2 + 0 ];
/* one entry in the 'Power' table use the following format, xxxxxyyyyyyyys with: */
/* s = sign bit */
/* yyyyyyyy = 8-bits decimal part (0-TL_RES_LEN) */
/* xxxxx = 5-bits integer 'shift' value (0-31) but, since Power table output is 13 bits, */
/* any value above 13 (included) would be discarded. */
for (i=1; i<13; i++)
{
tl_tab[ x*2+0 + i*2*TL_RES_LEN ] = tl_tab[ x*2+0 ]>>i;
tl_tab[ x*2+1 + i*2*TL_RES_LEN ] = -tl_tab[ x*2+0 + i*2*TL_RES_LEN ];
}
}
/* build Logarithmic Sinus table */
for (i=0; i<SIN_LEN; i++)
{
/* non-standard sinus */
m = sin( ((i*2)+1) * M_PI / SIN_LEN ); /* checked against the real chip */
/* we never reach zero here due to ((i*2)+1) */
if (m>0.0)
o = 8*log(1.0/m)/log(2.0); /* convert to 'decibels' */
else
o = 8*log(-1.0/m)/log(2.0); /* convert to 'decibels' */
o = o / (ENV_STEP/4);
n = (int)(2.0*o);
if (n&1) /* round to nearest */
n = (n>>1)+1;
else
n = n>>1;
/* 13-bits (8.5) value is formatted for above 'Power' table */
sin_tab[ i ] = n*2 + (m>=0.0? 0: 1 );
}
/* build LFO PM modulation table */
for(i = 0; i < 8; i++) /* 8 PM depths */
{
UINT8 fnum;
for (fnum=0; fnum<128; fnum++) /* 7 bits meaningful of F-NUMBER */
{
UINT8 value;
UINT8 step;
UINT32 offset_depth = i;
UINT32 offset_fnum_bit;
UINT32 bit_tmp;
for (step=0; step<8; step++)
{
value = 0;
for (bit_tmp=0; bit_tmp<7; bit_tmp++) /* 7 bits */
{
if (fnum & (1<<bit_tmp)) /* only if bit "bit_tmp" is set */
{
offset_fnum_bit = bit_tmp * 8;
value += lfo_pm_output[offset_fnum_bit + offset_depth][step];
}
}
/* 32 steps for LFO PM (sinus) */
lfo_pm_table[(fnum*32*8) + (i*32) + step + 0] = value;
lfo_pm_table[(fnum*32*8) + (i*32) +(step^7)+ 8] = value;
lfo_pm_table[(fnum*32*8) + (i*32) + step +16] = -value;
lfo_pm_table[(fnum*32*8) + (i*32) +(step^7)+24] = -value;
}
}
}
#ifdef SAVE_SAMPLE
sample[0]=fopen("sampsum.pcm","wb");
#endif
}
#endif /* BUILD_OPN */
/*******************************************************************************/
/* YM2612 local section */
/*******************************************************************************/
static void ym2612_generate(void *chip, FMSAMPLE *buffer, int frames, int mix)
{
YM2612 *F2612 = (YM2612 *)chip;
FM_CH *cch = F2612->CH;
FMSAMPLE *bufOut = buffer;
int i;
#if !RSM_ENABLE
FMSAMPLE bufTmp[2];
#endif
ym2612_pre_generate(chip);
if (!frames)
{
update_ssg_eg_channel(&cch[0].SLOT[SLOT1]);
update_ssg_eg_channel(&cch[1].SLOT[SLOT1]);
update_ssg_eg_channel(&cch[2].SLOT[SLOT1]);
update_ssg_eg_channel(&cch[3].SLOT[SLOT1]);
update_ssg_eg_channel(&cch[4].SLOT[SLOT1]);
update_ssg_eg_channel(&cch[5].SLOT[SLOT1]);
}
/* buffering */
for(i=0 ; i < frames ; i++)
{
#if RSM_ENABLE
while(F2612->OPN.ST.framecnt >= F2612->OPN.ST.rateratio)/* Copy-Pasta from Nuked */
{
/* Copy-Pasta from Nuked */
F2612->OPN.ST.prev_sample[0] = F2612->OPN.ST.cur_sample[0];
F2612->OPN.ST.prev_sample[1] = F2612->OPN.ST.cur_sample[1];
ym2612_generate_one_native(chip, F2612->OPN.ST.cur_sample);
F2612->OPN.ST.framecnt -= F2612->OPN.ST.rateratio;
/* Copy-Pasta from Nuked */
}
if (mix)
{
*bufOut++ += (FMSAMPLE)((F2612->OPN.ST.prev_sample[0] * (F2612->OPN.ST.rateratio - F2612->OPN.ST.framecnt)
+ F2612->OPN.ST.cur_sample[0] * F2612->OPN.ST.framecnt) / F2612->OPN.ST.rateratio);
*bufOut++ += (FMSAMPLE)((F2612->OPN.ST.prev_sample[1] * (F2612->OPN.ST.rateratio - F2612->OPN.ST.framecnt)
+ F2612->OPN.ST.cur_sample[1] * F2612->OPN.ST.framecnt) / F2612->OPN.ST.rateratio);
} else {
*bufOut++ = (FMSAMPLE)((F2612->OPN.ST.prev_sample[0] * (F2612->OPN.ST.rateratio - F2612->OPN.ST.framecnt)
+ F2612->OPN.ST.cur_sample[0] * F2612->OPN.ST.framecnt) / F2612->OPN.ST.rateratio);
*bufOut++ = (FMSAMPLE)((F2612->OPN.ST.prev_sample[1] * (F2612->OPN.ST.rateratio - F2612->OPN.ST.framecnt)
+ F2612->OPN.ST.cur_sample[1] * F2612->OPN.ST.framecnt) / F2612->OPN.ST.rateratio);
}
F2612->OPN.ST.framecnt += 1 << RSM_FRAC;
#else
if (mix)
{
ym2612_generate_one_native(chip, bufTmp);
bufOut[0] += bufTmp[0];
bufOut[1] += bufTmp[1];
}
else
{
ym2612_generate_one_native(chip, bufOut);
}
bufOut += 2;
#endif
}
/* ym2612_post_generate(chip, frames); */
}
void ym2612_pre_generate(void *chip)
{
YM2612 *F2612 = (YM2612 *)chip;
FM_OPN *OPN = &F2612->OPN;
FM_CH *cch = F2612->CH;
/* refresh PG and EG */
refresh_fc_eg_chan( OPN, &cch[0] );
refresh_fc_eg_chan( OPN, &cch[1] );
if( (OPN->ST.mode & 0xc0) )
{
/* 3SLOT MODE */
if( cch[2].SLOT[SLOT1].Incr==-1)
{
refresh_fc_eg_slot(OPN, &cch[2].SLOT[SLOT1] , OPN->SL3.fc[1] , OPN->SL3.kcode[1] );
refresh_fc_eg_slot(OPN, &cch[2].SLOT[SLOT2] , OPN->SL3.fc[2] , OPN->SL3.kcode[2] );
refresh_fc_eg_slot(OPN, &cch[2].SLOT[SLOT3] , OPN->SL3.fc[0] , OPN->SL3.kcode[0] );
refresh_fc_eg_slot(OPN, &cch[2].SLOT[SLOT4] , cch[2].fc , cch[2].kcode );
}
} else
refresh_fc_eg_chan( OPN, &cch[2] );
refresh_fc_eg_chan( OPN, &cch[3] );
refresh_fc_eg_chan( OPN, &cch[4] );
refresh_fc_eg_chan( OPN, &cch[5] );
}
void ym2612_generate_one_native(void *chip, FMSAMPLE buffer[])
{
YM2612 *F2612 = (YM2612 *)chip;
FM_OPN *OPN = &F2612->OPN;
INT32 *out_fm = OPN->out_fm;
FM_CH *cch = F2612->CH;
INT32 dacout;
int lt,rt;
if (! F2612->MuteDAC)
dacout = F2612->dacout;
else
dacout = 0;
/* clear outputs */
out_fm[0] = 0;
out_fm[1] = 0;
out_fm[2] = 0;
out_fm[3] = 0;
out_fm[4] = 0;
out_fm[5] = 0;
/* update SSG-EG output */
update_ssg_eg_channel(&cch[0].SLOT[SLOT1]);
update_ssg_eg_channel(&cch[1].SLOT[SLOT1]);
update_ssg_eg_channel(&cch[2].SLOT[SLOT1]);
update_ssg_eg_channel(&cch[3].SLOT[SLOT1]);
update_ssg_eg_channel(&cch[4].SLOT[SLOT1]);
update_ssg_eg_channel(&cch[5].SLOT[SLOT1]);
/* calculate FM */
if (! F2612->dac_test)
{
chan_calc(F2612, OPN, &cch[0]);
chan_calc(F2612, OPN, &cch[1]);
chan_calc(F2612, OPN, &cch[2]);
chan_calc(F2612, OPN, &cch[3]);
chan_calc(F2612, OPN, &cch[4]);
if( F2612->dacen )
cch[5].connect4 += dacout;
else
chan_calc(F2612, OPN, &cch[5]);
}
else
{
out_fm[0] = out_fm[1] = dacout;
out_fm[2] = out_fm[3] = dacout;
out_fm[5] = dacout;
}
/* advance LFO */
advance_lfo(OPN);
/* advance envelope generator */
OPN->eg_timer += OPN->eg_timer_add;
while (OPN->eg_timer >= OPN->eg_timer_overflow)
{
/* reset EG timer */
OPN->eg_timer -= OPN->eg_timer_overflow;
/* increment EG counter */
OPN->eg_cnt++;
/* EG counter is 12-bit only and zero value is skipped (verified on real hardware) */
if (OPN->eg_cnt == 4096)
OPN->eg_cnt = 1;
/* advance envelope generator */
advance_eg_channel(OPN, &cch[0].SLOT[SLOT1]);
advance_eg_channel(OPN, &cch[1].SLOT[SLOT1]);
advance_eg_channel(OPN, &cch[2].SLOT[SLOT1]);
advance_eg_channel(OPN, &cch[3].SLOT[SLOT1]);
advance_eg_channel(OPN, &cch[4].SLOT[SLOT1]);
advance_eg_channel(OPN, &cch[5].SLOT[SLOT1]);
}
/*fprintf(hFile, "%u", FileSample, out_fm[0]);
for (lt = 0; lt < 6; lt ++)
fprintf(hFile, "\t%d", out_fm[lt]);
fprintf(hFile, "\n");
FileSample ++;*/
if (out_fm[0] > 8192) out_fm[0] = 8192;
else if (out_fm[0] < -8192) out_fm[0] = -8192;
if (out_fm[1] > 8192) out_fm[1] = 8192;
else if (out_fm[1] < -8192) out_fm[1] = -8192;
if (out_fm[2] > 8192) out_fm[2] = 8192;
else if (out_fm[2] < -8192) out_fm[2] = -8192;
if (out_fm[3] > 8192) out_fm[3] = 8192;
else if (out_fm[3] < -8192) out_fm[3] = -8192;
if (out_fm[4] > 8192) out_fm[4] = 8192;
else if (out_fm[4] < -8192) out_fm[4] = -8192;
if (out_fm[5] > 8192) out_fm[5] = 8192;
else if (out_fm[5] < -8192) out_fm[5] = -8192;
/* 6-channels mixing */
lt = ((out_fm[0]>>0) & OPN->pan[0]);
rt = ((out_fm[0]>>0) & OPN->pan[1]);
lt += ((out_fm[1]>>0) & OPN->pan[2]);
rt += ((out_fm[1]>>0) & OPN->pan[3]);
lt += ((out_fm[2]>>0) & OPN->pan[4]);
rt += ((out_fm[2]>>0) & OPN->pan[5]);
lt += ((out_fm[3]>>0) & OPN->pan[6]);
rt += ((out_fm[3]>>0) & OPN->pan[7]);
if (! F2612->dac_test)
{
lt += ((out_fm[4]>>0) & OPN->pan[8]);
rt += ((out_fm[4]>>0) & OPN->pan[9]);
}
else
{
lt += dacout;
lt += dacout;
}
lt += ((out_fm[5]>>0) & OPN->pan[10]);
rt += ((out_fm[5]>>0) & OPN->pan[11]);
/* Limit( lt, MAXOUT, MINOUT ); */
/* Limit( rt, MAXOUT, MINOUT ); */
#ifdef SAVE_SAMPLE
SAVE_ALL_CHANNELS
#endif
/* buffering */
if (F2612->WaveOutMode & 0x01)
F2612->WaveL = lt;
if (F2612->WaveOutMode & 0x02)
F2612->WaveR = rt;
if (F2612->WaveOutMode ^ 0x03)
F2612->WaveOutMode ^= 0x03;
buffer[0] = (FMSAMPLE)(F2612->WaveL / 2);
buffer[1] = (FMSAMPLE)(F2612->WaveR / 2);
/* CSM mode: if CSM Key ON has occured, CSM Key OFF need to be sent */
/* only if Timer A does not overflow again (i.e CSM Key ON not set again) */
OPN->SL3.key_csm <<= 1;
/* timer A control */
/* INTERNAL_TIMER_A( &OPN->ST , cch[2] ) */
{
if( OPN->ST.TAC && (OPN->ST.timer_handler==0) )
if( (OPN->ST.TAC -= (int)(OPN->ST.freqbase*4096)) <= 0 )
{
TimerAOver( &OPN->ST );
/* CSM mode total level latch and auto key on */
if( OPN->ST.mode & 0x80 )
CSMKeyControll( OPN, &cch[2] );
}
}
/* CSM Mode Key ON still disabled */
if (OPN->SL3.key_csm & 2)
{
/* CSM Mode Key OFF (verified by Nemesis on real hardware) */
FM_KEYOFF_CSM(&cch[2],SLOT1);
FM_KEYOFF_CSM(&cch[2],SLOT2);
FM_KEYOFF_CSM(&cch[2],SLOT3);
FM_KEYOFF_CSM(&cch[2],SLOT4);
OPN->SL3.key_csm = 0;
}
}
#if 0
void ym2612_post_generate(void *chip, int length)
{
YM2612 *F2612 = (YM2612 *)chip;
/* timer B control */
INTERNAL_TIMER_B(&F2612->OPN.ST, length);
}
#endif
#ifdef __STATE_H__
void ym2612_postload(void *chip)
{
if (chip)
{
YM2612 *F2612 = (YM2612 *)chip;
int r;
/* DAC data & port */
F2612->dacout = ((int)F2612->REGS[0x2a] - 0x80) << 6; /* level unknown */
F2612->dacen = F2612->REGS[0x2d] & 0x80;
/* OPN registers */
/* DT / MULTI , TL , KS / AR , AMON / DR , SR , SL / RR , SSG-EG */
for(r=0x30;r<0x9e;r++)
if((r&3) != 3)
{
OPNWriteReg(&F2612->OPN,r,F2612->REGS[r]);
OPNWriteReg(&F2612->OPN,r|0x100,F2612->REGS[r|0x100]);
}
/* FB / CONNECT , L / R / AMS / PMS */
for(r=0xb0;r<0xb6;r++)
if((r&3) != 3)
{
OPNWriteReg(&F2612->OPN,r,F2612->REGS[r]);
OPNWriteReg(&F2612->OPN,r|0x100,F2612->REGS[r|0x100]);
}
/* channels */
/*FM_channel_postload(F2612->CH,6);*/
}
}
static void YM2612_save_state(YM2612 *F2612, running_device *device)
{
state_save_register_device_item_array(device, 0, F2612->REGS);
FMsave_state_st(device,&F2612->OPN.ST);
FMsave_state_channel(device,F2612->CH,6);
/* 3slots */
state_save_register_device_item_array(device, 0, F2612->OPN.SL3.fc);
state_save_register_device_item(device, 0, F2612->OPN.SL3.fn_h);
state_save_register_device_item_array(device, 0, F2612->OPN.SL3.kcode);
/* address register1 */
state_save_register_device_item(device, 0, F2612->addr_A1);
}
#endif /* _STATE_H */
/* initialize YM2612 emulator(s) */
static void * ym2612_init(void *param, int clock, int rate,
FM_TIMERHANDLER timer_handler,FM_IRQHANDLER IRQHandler)
{
YM2612 *F2612;
if (clock <= 0 || rate <= 0)
return NULL; /* Forbid zero clock and sample rate */
/* allocate extend state space */
/* F2612 = auto_alloc_clear(device->machine, YM2612); */
F2612 = (YM2612 *)malloc(sizeof(YM2612));
if (F2612 == NULL)
return NULL;
memset(F2612, 0x00, sizeof(YM2612));
/* allocate total level table (128kb space) */
init_tables();
F2612->OPN.ST.param = param;
F2612->OPN.type = TYPE_YM2612;
F2612->OPN.P_CH = F2612->CH;
/* F2612->OPN.ST.device = device; */
F2612->OPN.ST.clock = clock;
#if RSM_ENABLE
F2612->OPN.ST.rate = 53267;
F2612->OPN.ST.rateratio = (INT32)(UINT32)((((UINT64)144 * rate) << RSM_FRAC) / clock);
F2612->OPN.ST.framecnt = 1 << RSM_FRAC;
memset(&(F2612->OPN.ST.cur_sample), 0x00, sizeof(FMSAMPLE) * 2);
memset(&(F2612->OPN.ST.prev_sample), 0x00, sizeof(FMSAMPLE) * 2);
#else
F2612->OPN.ST.rate = rate;
#endif
/* F2612->OPN.ST.irq = 0; */
/* F2612->OPN.ST.status = 0; */
/* Extend handler */
F2612->OPN.ST.timer_handler = timer_handler;
F2612->OPN.ST.IRQ_Handler = IRQHandler;
if (PseudoSt)
F2612->WaveOutMode = 0x01;
else
F2612->WaveOutMode = 0x03;
/*hFile = fopen("YM2612.log", "wt");
fprintf(hFile, "Clock: %d, Sample Rate: %d\n", clock, rate);
fprintf(hFile, "Sample\tCh 0\tCh 1\tCh 2\tCh 3\tCh 4\tCh 5\n");
FileSample = 0;*/
#ifdef __STATE_H__
YM2612_save_state(F2612, device);
#endif
return F2612;
}
/* shut down emulator */
static void ym2612_shutdown(void *chip)
{
YM2612 *F2612 = (YM2612 *)chip;
/* fclose(hFile); */
FMCloseTable();
/* auto_free(F2612->OPN.ST.device->machine, F2612); */
free(F2612);
}
/* reset one of chip */
static void ym2612_reset_chip(void *chip)
{
int i;
YM2612 *F2612 = (YM2612 *)chip;
FM_OPN *OPN = &F2612->OPN;
OPNSetPres( OPN, 6*24, 6*24, 0);
/* status clear */
FM_IRQMASK_SET(&OPN->ST,0x03);
FM_BUSY_CLEAR(&OPN->ST);
/* OPNWriteMode(OPN,0x27,0x30); */ /* mode 0 , timer reset */
#if RSM_ENABLE
/* Resampler's state */
F2612->OPN.ST.framecnt = 1 << RSM_FRAC;
memset(&(F2612->OPN.ST.cur_sample), 0x00, sizeof(FMSAMPLE) * 2);
memset(&(F2612->OPN.ST.prev_sample), 0x00, sizeof(FMSAMPLE) * 2);
#endif
OPN->eg_timer = 0;
OPN->eg_cnt = 0;
OPN->lfo_timer = 0;
OPN->lfo_cnt = 0;
OPN->LFO_AM = 126;
OPN->LFO_PM = 0;
OPN->ST.TAC = 0;
OPN->ST.TBC = 0;
OPN->SL3.key_csm = 0;
OPN->ST.status = 0;
OPN->ST.mode = 0;
memset(F2612->REGS, 0x00, sizeof(UINT8) * 512);
OPNWriteMode(OPN,0x22,0x00);
OPNWriteMode(OPN,0x27,0x30);
OPNWriteMode(OPN,0x26,0x00);
OPNWriteMode(OPN,0x25,0x00);
OPNWriteMode(OPN,0x24,0x00);
reset_channels( &OPN->ST , &F2612->CH[0] , 6 );
for(i = 0xb6 ; i >= 0xb4 ; i-- )
{
OPNWriteReg(OPN,i ,0xc0);
OPNWriteReg(OPN,i|0x100,0xc0);
}
for(i = 0xb2 ; i >= 0x30 ; i-- )
{
OPNWriteReg(OPN,i ,0);
OPNWriteReg(OPN,i|0x100,0);
}
/* DAC mode clear */
F2612->dacen = 0;
F2612->dac_test = 0;
F2612->dacout = 0;
if (F2612->WaveOutMode == 0x02)
F2612->WaveOutMode >>= 1;
}
/* YM2612 write */
/* n = number */
/* a = address */
/* v = value */
static int ym2612_write(void *chip, int a, UINT8 v)
{
YM2612 *F2612 = (YM2612 *)chip;
int addr;
v &= 0xff; /* adjust to 8 bit bus */
switch( a&3)
{
case 0: /* address port 0 */
F2612->OPN.ST.address = v;
F2612->addr_A1 = 0;
break;
case 1: /* data port 0 */
if (F2612->addr_A1 != 0)
break; /* verified on real YM2608 */
addr = F2612->OPN.ST.address;
F2612->REGS[addr] = v;
switch( addr & 0xf0 )
{
case 0x20: /* 0x20-0x2f Mode */
switch( addr )
{
case 0x2a: /* DAC data (YM2612) */
ym2612_update_one(chip, DUMMYBUF, 0);
F2612->dacout = ((int)v - 0x80) << 6; /* level unknown */
break;
case 0x2b: /* DAC Sel (YM2612) */
/* b7 = dac enable */
F2612->dacen = v & 0x80;
break;
case 0x2C: /* undocumented: DAC Test Reg */
/* b5 = volume enable */
F2612->dac_test = v & 0x20;
break;
default: /* OPN section */
/* ym2612_update_req(F2612->OPN.ST.param); */
ym2612_update_one(chip, DUMMYBUF, 0);
/* write register */
OPNWriteMode(&(F2612->OPN),addr,v);
}
break;
default: /* 0x30-0xff OPN section */
ym2612_update_one(chip, DUMMYBUF, 0);
/* write register */
OPNWriteReg(&(F2612->OPN),addr,v);
}
break;
case 2: /* address port 1 */
F2612->OPN.ST.address = v;
F2612->addr_A1 = 1;
break;
case 3: /* data port 1 */
if (F2612->addr_A1 != 1)
break; /* verified on real YM2608 */
addr = F2612->OPN.ST.address;
F2612->REGS[addr | 0x100] = v;
ym2612_update_one(chip, DUMMYBUF, 0);
OPNWriteReg(&(F2612->OPN),addr | 0x100,v);
break;
}
return F2612->OPN.ST.irq;
}
#if 0
static UINT8 ym2612_read(void *chip,int a)
{
YM2612 *F2612 = (YM2612 *)chip;
switch( a&3)
{
case 0: /* status 0 */
return FM_STATUS_FLAG(&F2612->OPN.ST);
case 1:
case 2:
case 3:
/* LOG(LOG_WAR,("YM2612 #%p:A=%d read unmapped area\n",F2612->OPN.ST.param,a)); */
return FM_STATUS_FLAG(&F2612->OPN.ST);
}
return 0;
}
static int ym2612_timer_over(void *chip,int c)
{
YM2612 *F2612 = (YM2612 *)chip;
if( c )
{ /* Timer B */
TimerBOver( &(F2612->OPN.ST) );
}
else
{ /* Timer A */
ym2612_update_one(chip, DUMMYBUF, 0);
/* timer update */
TimerAOver( &(F2612->OPN.ST) );
/* CSM mode key,TL controll */
if ((F2612->OPN.ST.mode & 0xc0) == 0x80)
{ /* CSM mode total level latch and auto key on */
CSMKeyControll( &F2612->OPN, &(F2612->CH[2]) );
}
}
return F2612->OPN.ST.irq;
}
#endif
static void ym2612_set_mutemask(void *chip, UINT32 MuteMask)
{
YM2612 *F2612 = (YM2612 *)chip;
UINT8 CurChn;
for (CurChn = 0; CurChn < 6; CurChn ++)
F2612->CH[CurChn].Muted = (MuteMask >> CurChn) & 0x01;
F2612->MuteDAC = (MuteMask >> 6) & 0x01;
return;
}
#if 0
static void ym2612_setoptions(UINT8 Flags)
{
PseudoSt = (Flags >> 2) & 0x01;
return;
}
#endif
} // Ym2612_MameImpl
Ym2612_MAME_Emu::Ym2612_MAME_Emu() { impl = 0; }
Ym2612_MAME_Emu::~Ym2612_MAME_Emu()
{
if ( impl ) Ym2612_MameImpl::ym2612_shutdown( impl );
}
const char *Ym2612_MAME_Emu::set_rate(double sample_rate, double clock_rate)
{
if ( impl ) Ym2612_MameImpl::ym2612_shutdown( impl );
impl = Ym2612_MameImpl::ym2612_init( NULL, static_cast<int>(clock_rate), static_cast<int>(sample_rate), NULL, NULL );
if ( !impl )
return "Out of memory";
return 0;
}
void Ym2612_MAME_Emu::reset()
{
if ( impl ) Ym2612_MameImpl::ym2612_reset_chip( impl );
}
void Ym2612_MAME_Emu::mute_voices(int mask)
{
if ( impl ) Ym2612_MameImpl::ym2612_set_mutemask( impl, mask );
}
void Ym2612_MAME_Emu::write0(int addr, int data)
{
if ( !impl ) return;
Ym2612_MameImpl::ym2612_write( impl, 0, static_cast<uint8_t>(addr) );
Ym2612_MameImpl::ym2612_write( impl, 1, static_cast<uint8_t>(data) );
}
void Ym2612_MAME_Emu::write1(int addr, int data)
{
if ( !impl ) return;
Ym2612_MameImpl::ym2612_write( impl, 0 + 2, static_cast<uint8_t>(addr) );
Ym2612_MameImpl::ym2612_write( impl, 1 + 2, static_cast<uint8_t>(data) );
}
void Ym2612_MAME_Emu::run(int pair_count, Ym2612_MAME_Emu::sample_t *out)
{
if ( impl ) Ym2612_MameImpl::ym2612_generate( impl, out, pair_count, 0);
}
Reference in a new issue View git blame Copy permalink