zdoom
/
qzdoom
mirror of https://github.com/ZDoom/qzdoom.git
0
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
qzdoom/libraries/oplsynth/fmopl.cpp

1712 lines
46 KiB
C++
Raw Normal View History

- updated the license in fmopl.cpp to the one in the current version of the original file.
2017-04-21 15:48:40 +00:00
// license:GPL-2.0+
// copyright-holders:Jarek Burczynski,Tatsuyuki Satoh
/*
Normalize line endings
2016-03-01 15:47:10 +00:00
- updated the license in fmopl.cpp to the one in the current version of the original file.
2017-04-21 15:48:40 +00:00
This file is based on fmopl.c from MAME. The non-YM3816 parts have been
Normalize line endings
2016-03-01 15:47:10 +00:00
ripped out in the interest of making this simpler, since Doom music doesn't
need them. I also made it render the sound a voice at a time instead of a
sample at a time, so unused voices don't waste time being calculated. If all
voices are playing, it's not much difference, but it does offer a big
improvement when only a few voices are playing.
**
** File: fmopl.c - software implementation of FM sound generator
** types OPL and OPL2
**
- updated the license in fmopl.cpp to the one in the current version of the original file.
2017-04-21 15:48:40 +00:00
** Copyright Jarek Burczynski (bujar at mame dot net)
** Copyright Tatsuyuki Satoh , MultiArcadeMachineEmulator development
Normalize line endings
2016-03-01 15:47:10 +00:00
**
** Version 0.72
**
Revision History:
04-08-2003 Jarek Burczynski:
- removed BFRDY hack. BFRDY is busy flag, and it should be 0 only when the chip
handles memory read/write or during the adpcm synthesis when the chip
requests another byte of ADPCM data.
24-07-2003 Jarek Burczynski:
- added a small hack for Y8950 status BFRDY flag (bit 3 should be set after
some (unknown) delay). Right now it's always set.
14-06-2003 Jarek Burczynski:
- implemented all of the status register flags in Y8950 emulation
- updated the license in fmopl.cpp to the one in the current version of the original file.
2017-04-21 15:48:40 +00:00
- renamed y8950_set_delta_t_memory() parameters from _rom_ to _mem_ since
Normalize line endings
2016-03-01 15:47:10 +00:00
they can be either RAM or ROM
08-10-2002 Jarek Burczynski (thanks to Dox for the YM3526 chip)
- updated the license in fmopl.cpp to the one in the current version of the original file.
2017-04-21 15:48:40 +00:00
- corrected ym3526_read() to always set bit 2 and bit 1
to HIGH state - identical to ym3812_read (verified on real YM3526)
Normalize line endings
2016-03-01 15:47:10 +00:00
04-28-2002 Jarek Burczynski:
- binary exact Envelope Generator (verified on real YM3812);
compared to YM2151: the EG clock is equal to internal_clock,
rates are 2 times slower and volume resolution is one bit less
- modified interface functions (they no longer return pointer -
that's internal to the emulator now):
- updated the license in fmopl.cpp to the one in the current version of the original file.
2017-04-21 15:48:40 +00:00
- new wrapper functions for OPLCreate: ym3526_init(), ym3812_init() and y8950_init()
Normalize line endings
2016-03-01 15:47:10 +00:00
- corrected 'off by one' error in feedback calculations (when feedback is off)
- enabled waveform usage (credit goes to Vlad Romascanu and zazzal22)
- speeded up noise generator calculations (Nicola Salmoria)
03-24-2002 Jarek Burczynski (thanks to Dox for the YM3812 chip)
Complete rewrite (all verified on real YM3812):
- corrected sin_tab and tl_tab data
- corrected operator output calculations
- corrected waveform_select_enable register;
simply: ignore all writes to waveform_select register when
waveform_select_enable == 0 and do not change the waveform previously selected.
- corrected KSR handling
- corrected Envelope Generator: attack shape, Sustain mode and
Percussive/Non-percussive modes handling
- Envelope Generator rates are two times slower now
- LFO amplitude (tremolo) and phase modulation (vibrato)
- rhythm sounds phase generation
- white noise generator (big thanks to Olivier Galibert for mentioning Berlekamp-Massey algorithm)
- corrected key on/off handling (the 'key' signal is ORed from three sources: FM, rhythm and CSM)
- funky details (like ignoring output of operator 1 in BD rhythm sound when connect == 1)
12-28-2001 Acho A. Tang
- reflected Delta-T EOS status on Y8950 status port.
- fixed subscription range of attack/decay tables
- updated the license in fmopl.cpp to the one in the current version of the original file.
2017-04-21 15:48:40 +00:00
To do:
add delay before key off in CSM mode (see CSMKeyControll)
verify volume of the FM part on the Y8950
Normalize line endings
2016-03-01 15:47:10 +00:00
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <math.h>
- made the OPL synth backend a separate library.
2019-09-26 18:06:39 +00:00
#include <stdint.h>
#include <string>
Normalize line endings
2016-03-01 15:47:10 +00:00
//#include "driver.h" /* use M.A.M.E. */
#include "opl.h"
/* compiler dependence */
#ifndef OSD_CPU_H
#define OSD_CPU_H
#endif
#ifndef PI
#define PI 3.14159265358979323846
#endif
#ifdef _MSC_VER
#pragma warning (disable: 4244)
#endif
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
#define FREQ_SH 16 /* 16.16 fixed point (frequency calculations) */
#define EG_SH 16 /* 16.16 fixed point (EG timing) */
#define LFO_SH 24 /* 8.24 fixed point (LFO calculations) */
#define TIMER_SH 16 /* 16.16 fixed point (timers calculations) */
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
#define FREQ_MASK ((1<<FREQ_SH)-1)
Normalize line endings
2016-03-01 15:47:10 +00:00
/* envelope output entries */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
#define ENV_BITS 10
#define ENV_LEN (1<<ENV_BITS)
#define ENV_STEP (128.0/ENV_LEN)
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
#define MAX_ATT_INDEX ((1<<(ENV_BITS-1))-1) /*511*/
#define MIN_ATT_INDEX (0)
Normalize line endings
2016-03-01 15:47:10 +00:00
/* sinwave entries */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
#define SIN_BITS 10
#define SIN_LEN (1<<SIN_BITS)
#define SIN_MASK (SIN_LEN-1)
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
#define TL_RES_LEN (256) /* 8 bits addressing (real chip) */
Normalize line endings
2016-03-01 15:47:10 +00:00
/* register number to channel number , slot offset */
#define SLOT1 0
#define SLOT2 1
/* Envelope Generator phases */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
#define EG_ATT 4
#define EG_DEC 3
#define EG_SUS 2
#define EG_REL 1
#define EG_OFF 0
Normalize line endings
2016-03-01 15:47:10 +00:00
#define OPL_CLOCK 3579545 // master clock (Hz)
#define OPL_RATE 49716 // sampling rate (Hz)
#define OPL_TIMERBASE (OPL_CLOCK / 72.0) // Timer base time (==sampling time)
#define OPL_FREQBASE (OPL_TIMERBASE / OPL_RATE) // frequency base
/* Saving is necessary for member of the 'R' mark for suspend/resume */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
struct OPL_SLOT
{
uint32_t ar; /* attack rate: AR<<2 */
uint32_t dr; /* decay rate: DR<<2 */
uint32_t rr; /* release rate:RR<<2 */
uint8_t KSR; /* key scale rate */
uint8_t ksl; /* keyscale level */
uint8_t ksr; /* key scale rate: kcode>>KSR */
uint8_t mul; /* multiple: mul_tab[ML] */
Normalize line endings
2016-03-01 15:47:10 +00:00
/* Phase Generator */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t Cnt; /* frequency counter */
uint32_t Incr; /* frequency counter step */
uint8_t FB; /* feedback shift value */
int32_t *connect1; /* slot1 output pointer */
int32_t op1_out[2]; /* slot1 output for feedback */
uint8_t CON; /* connection (algorithm) type */
Normalize line endings
2016-03-01 15:47:10 +00:00
/* Envelope Generator */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t eg_type; /* percussive/non-percussive mode */
uint8_t state; /* phase type */
uint32_t TL; /* total level: TL << 2 */
int32_t TLL; /* adjusted now TL */
int32_t volume; /* envelope counter */
uint32_t sl; /* sustain level: sl_tab[SL] */
uint8_t eg_sh_ar; /* (attack state) */
uint8_t eg_sel_ar; /* (attack state) */
uint8_t eg_sh_dr; /* (decay state) */
uint8_t eg_sel_dr; /* (decay state) */
uint8_t eg_sh_rr; /* (release state) */
uint8_t eg_sel_rr; /* (release state) */
uint32_t key; /* 0 = KEY OFF, >0 = KEY ON */
Normalize line endings
2016-03-01 15:47:10 +00:00
/* LFO */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t AMmask; /* LFO Amplitude Modulation enable mask */
uint8_t vib; /* LFO Phase Modulation enable flag (active high)*/
Normalize line endings
2016-03-01 15:47:10 +00:00
/* waveform select */
- updated the license in fmopl.cpp to the one in the current version of the original file.
2017-04-21 15:48:40 +00:00
uint16_t wavetable;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
};
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
struct OPL_CH
{
Normalize line endings
2016-03-01 15:47:10 +00:00
OPL_SLOT SLOT[2];
/* phase generator state */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t block_fnum; /* block+fnum */
uint32_t fc; /* Freq. Increment base */
uint32_t ksl_base; /* KeyScaleLevel Base step */
uint8_t kcode; /* key code (for key scaling) */
Normalize line endings
2016-03-01 15:47:10 +00:00
float LeftVol; /* volumes for stereo panning */
float RightVol;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
};
Normalize line endings
2016-03-01 15:47:10 +00:00
/* OPL state */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
struct FM_OPL
{
Normalize line endings
2016-03-01 15:47:10 +00:00
/* FM channel slots */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
OPL_CH P_CH[9]; /* OPL/OPL2 chips have 9 channels*/
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t eg_cnt; /* global envelope generator counter */
uint32_t eg_timer; /* global envelope generator counter works at frequency = chipclock/72 */
uint32_t eg_timer_add; /* step of eg_timer */
uint32_t eg_timer_overflow; /* envelope generator timer overflows every 1 sample (on real chip) */
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t rhythm; /* Rhythm mode */
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t fn_tab[1024]; /* fnumber->increment counter */
Normalize line endings
2016-03-01 15:47:10 +00:00
/* LFO */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t lfo_am_depth;
uint8_t lfo_pm_depth_range;
uint32_t lfo_am_cnt;
uint32_t lfo_am_inc;
uint32_t lfo_pm_cnt;
uint32_t lfo_pm_inc;
uint32_t noise_rng; /* 23 bit noise shift register */
uint32_t noise_p; /* current noise 'phase' */
uint32_t noise_f; /* current noise period */
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t wavesel; /* waveform select enable flag */
Normalize line endings
2016-03-01 15:47:10 +00:00
int T[2]; /* timer counters */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t st[2]; /* timer enable */
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t address; /* address register */
uint8_t status; /* status flag */
uint8_t statusmask; /* status mask */
uint8_t mode; /* Reg.08 : CSM,notesel,etc. */
Normalize line endings
2016-03-01 15:47:10 +00:00
bool IsStereo; /* Write stereo output */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
};
Normalize line endings
2016-03-01 15:47:10 +00:00
/* mapping of register number (offset) to slot number used by the emulator */
static const int slot_array[32]=
{
0, 2, 4, 1, 3, 5,-1,-1,
6, 8,10, 7, 9,11,-1,-1,
12,14,16,13,15,17,-1,-1,
-1,-1,-1,-1,-1,-1,-1,-1
};
/* key scale level */
/* table is 3dB/octave , DV converts this into 6dB/octave */
/* 0.1875 is bit 0 weight of the envelope counter (volume) expressed in the 'decibel' scale */
#define DV (0.1875/2.0)
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static const uint32_t ksl_tab[8*16]=
Normalize line endings
2016-03-01 15:47:10 +00:00
{
/* OCT 0 */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV),
uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV),
uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV),
uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV),
Normalize line endings
2016-03-01 15:47:10 +00:00
/* OCT 1 */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV),
uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV),
uint32_t(0.000/DV), uint32_t(0.750/DV), uint32_t(1.125/DV), uint32_t(1.500/DV),
uint32_t(1.875/DV), uint32_t(2.250/DV), uint32_t(2.625/DV), uint32_t(3.000/DV),
Normalize line endings
2016-03-01 15:47:10 +00:00
/* OCT 2 */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV),
uint32_t(0.000/DV), uint32_t(1.125/DV), uint32_t(1.875/DV), uint32_t(2.625/DV),
uint32_t(3.000/DV), uint32_t(3.750/DV), uint32_t(4.125/DV), uint32_t(4.500/DV),
uint32_t(4.875/DV), uint32_t(5.250/DV), uint32_t(5.625/DV), uint32_t(6.000/DV),
Normalize line endings
2016-03-01 15:47:10 +00:00
/* OCT 3 */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(1.875/DV),
uint32_t(3.000/DV), uint32_t(4.125/DV), uint32_t(4.875/DV), uint32_t(5.625/DV),
uint32_t(6.000/DV), uint32_t(6.750/DV), uint32_t(7.125/DV), uint32_t(7.500/DV),
uint32_t(7.875/DV), uint32_t(8.250/DV), uint32_t(8.625/DV), uint32_t(9.000/DV),
Normalize line endings
2016-03-01 15:47:10 +00:00
/* OCT 4 */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t(0.000/DV), uint32_t(0.000/DV), uint32_t(3.000/DV), uint32_t(4.875/DV),
uint32_t(6.000/DV), uint32_t(7.125/DV), uint32_t(7.875/DV), uint32_t(8.625/DV),
uint32_t(9.000/DV), uint32_t(9.750/DV),uint32_t(10.125/DV),uint32_t(10.500/DV),
uint32_t(10.875/DV),uint32_t(11.250/DV),uint32_t(11.625/DV),uint32_t(12.000/DV),
Normalize line endings
2016-03-01 15:47:10 +00:00
/* OCT 5 */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t(0.000/DV), uint32_t(3.000/DV), uint32_t(6.000/DV), uint32_t(7.875/DV),
uint32_t(9.000/DV),uint32_t(10.125/DV),uint32_t(10.875/DV),uint32_t(11.625/DV),
uint32_t(12.000/DV),uint32_t(12.750/DV),uint32_t(13.125/DV),uint32_t(13.500/DV),
uint32_t(13.875/DV),uint32_t(14.250/DV),uint32_t(14.625/DV),uint32_t(15.000/DV),
Normalize line endings
2016-03-01 15:47:10 +00:00
/* OCT 6 */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t(0.000/DV), uint32_t(6.000/DV), uint32_t(9.000/DV),uint32_t(10.875/DV),
uint32_t(12.000/DV),uint32_t(13.125/DV),uint32_t(13.875/DV),uint32_t(14.625/DV),
uint32_t(15.000/DV),uint32_t(15.750/DV),uint32_t(16.125/DV),uint32_t(16.500/DV),
uint32_t(16.875/DV),uint32_t(17.250/DV),uint32_t(17.625/DV),uint32_t(18.000/DV),
Normalize line endings
2016-03-01 15:47:10 +00:00
/* OCT 7 */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t(0.000/DV), uint32_t(9.000/DV),uint32_t(12.000/DV),uint32_t(13.875/DV),
uint32_t(15.000/DV),uint32_t(16.125/DV),uint32_t(16.875/DV),uint32_t(17.625/DV),
uint32_t(18.000/DV),uint32_t(18.750/DV),uint32_t(19.125/DV),uint32_t(19.500/DV),
uint32_t(19.875/DV),uint32_t(20.250/DV),uint32_t(20.625/DV),uint32_t(21.000/DV)
Normalize line endings
2016-03-01 15:47:10 +00:00
};
#undef DV
/* 0 / 3.0 / 1.5 / 6.0 dB/OCT */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static const uint32_t ksl_shift[4] = { 31, 1, 2, 0 };
Normalize line endings
2016-03-01 15:47:10 +00:00
/* sustain level table (3dB per step) */
/* 0 - 15: 0, 3, 6, 9,12,15,18,21,24,27,30,33,36,39,42,93 (dB)*/
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
#define SC(db) (uint32_t) ( db * (2.0/ENV_STEP) )
static const uint32_t sl_tab[16]={
SC( 0),SC( 1),SC( 2),SC(3 ),SC(4 ),SC(5 ),SC(6 ),SC( 7),
SC( 8),SC( 9),SC(10),SC(11),SC(12),SC(13),SC(14),SC(31)
Normalize line endings
2016-03-01 15:47:10 +00:00
};
#undef SC
#define RATE_STEPS (8)
static const unsigned char eg_inc[15*RATE_STEPS]={
/*cycle:0 1 2 3 4 5 6 7*/
/* 0 */ 0,1, 0,1, 0,1, 0,1, /* rates 00..12 0 (increment by 0 or 1) */
/* 1 */ 0,1, 0,1, 1,1, 0,1, /* rates 00..12 1 */
/* 2 */ 0,1, 1,1, 0,1, 1,1, /* rates 00..12 2 */
/* 3 */ 0,1, 1,1, 1,1, 1,1, /* rates 00..12 3 */
/* 4 */ 1,1, 1,1, 1,1, 1,1, /* rate 13 0 (increment by 1) */
/* 5 */ 1,1, 1,2, 1,1, 1,2, /* rate 13 1 */
/* 6 */ 1,2, 1,2, 1,2, 1,2, /* rate 13 2 */
/* 7 */ 1,2, 2,2, 1,2, 2,2, /* rate 13 3 */
/* 8 */ 2,2, 2,2, 2,2, 2,2, /* rate 14 0 (increment by 2) */
/* 9 */ 2,2, 2,4, 2,2, 2,4, /* rate 14 1 */
/*10 */ 2,4, 2,4, 2,4, 2,4, /* rate 14 2 */
/*11 */ 2,4, 4,4, 2,4, 4,4, /* rate 14 3 */
/*12 */ 4,4, 4,4, 4,4, 4,4, /* rates 15 0, 15 1, 15 2, 15 3 (increment by 4) */
/*13 */ 8,8, 8,8, 8,8, 8,8, /* rates 15 2, 15 3 for attack */
/*14 */ 0,0, 0,0, 0,0, 0,0, /* infinity rates for attack and decay(s) */
};
#define O(a) (a*RATE_STEPS)
/*note that there is no O(13) in this table - it's directly in the code */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static const unsigned char eg_rate_select[16+64+16]={ /* Envelope Generator rates (16 + 64 rates + 16 RKS) */
Normalize line endings
2016-03-01 15:47:10 +00:00
/* 16 infinite time rates */
O(14),O(14),O(14),O(14),O(14),O(14),O(14),O(14),
O(14),O(14),O(14),O(14),O(14),O(14),O(14),O(14),
/* rates 00-12 */
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
O( 0),O( 1),O( 2),O( 3),
/* rate 13 */
O( 4),O( 5),O( 6),O( 7),
/* rate 14 */
O( 8),O( 9),O(10),O(11),
/* rate 15 */
O(12),O(12),O(12),O(12),
/* 16 dummy rates (same as 15 3) */
O(12),O(12),O(12),O(12),O(12),O(12),O(12),O(12),
O(12),O(12),O(12),O(12),O(12),O(12),O(12),O(12),
};
#undef O
/*rate 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 */
/*shift 12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1, 0, 0, 0, 0 */
/*mask 4095, 2047, 1023, 511, 255, 127, 63, 31, 15, 7, 3, 1, 0, 0, 0, 0 */
#define O(a) (a*1)
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static const unsigned char eg_rate_shift[16+64+16]={ /* Envelope Generator counter shifts (16 + 64 rates + 16 RKS) */
Normalize line endings
2016-03-01 15:47:10 +00:00
/* 16 infinite time rates */
O(0),O(0),O(0),O(0),O(0),O(0),O(0),O(0),
O(0),O(0),O(0),O(0),O(0),O(0),O(0),O(0),
/* rates 00-12 */
O(12),O(12),O(12),O(12),
O(11),O(11),O(11),O(11),
O(10),O(10),O(10),O(10),
O( 9),O( 9),O( 9),O( 9),
O( 8),O( 8),O( 8),O( 8),
O( 7),O( 7),O( 7),O( 7),
O( 6),O( 6),O( 6),O( 6),
O( 5),O( 5),O( 5),O( 5),
O( 4),O( 4),O( 4),O( 4),
O( 3),O( 3),O( 3),O( 3),
O( 2),O( 2),O( 2),O( 2),
O( 1),O( 1),O( 1),O( 1),
O( 0),O( 0),O( 0),O( 0),
/* rate 13 */
O( 0),O( 0),O( 0),O( 0),
/* rate 14 */
O( 0),O( 0),O( 0),O( 0),
/* rate 15 */
O( 0),O( 0),O( 0),O( 0),
/* 16 dummy rates (same as 15 3) */
O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),
O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),O( 0),
};
#undef O
/* multiple table */
#define ML 2
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static const uint8_t mul_tab[16]= {
Normalize line endings
2016-03-01 15:47:10 +00:00
/* 1/2, 1, 2, 3, 4, 5, 6, 7, 8, 9,10,10,12,12,15,15 */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t(0.50*ML), uint8_t(1.00*ML), uint8_t(2.00*ML), uint8_t(3.00*ML), uint8_t(4.00*ML), uint8_t(5.00*ML), uint8_t(6.00*ML), uint8_t(7.00*ML),
uint8_t(8.00*ML), uint8_t(9.00*ML),uint8_t(10.00*ML),uint8_t(10.00*ML),uint8_t(12.00*ML),uint8_t(12.00*ML),uint8_t(15.00*ML),uint8_t(15.00*ML)
Normalize line endings
2016-03-01 15:47:10 +00:00
};
#undef ML
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
/* TL_TAB_LEN is calculated as:
* 12 - sinus amplitude bits (Y axis)
* 2 - sinus sign bit (Y axis)
* TL_RES_LEN - sinus resolution (X axis)
Normalize line endings
2016-03-01 15:47:10 +00:00
*/
#define TL_TAB_LEN (12*2*TL_RES_LEN)
static signed int tl_tab[TL_TAB_LEN];
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
#define ENV_QUIET (TL_TAB_LEN>>4)
Normalize line endings
2016-03-01 15:47:10 +00:00
/* sin waveform table in 'decibel' scale */
/* four waveforms on OPL2 type chips */
static unsigned int sin_tab[SIN_LEN * 4];
/* LFO Amplitude Modulation table (verified on real YM3812)
27 output levels (triangle waveform); 1 level takes one of: 192, 256 or 448 samples
Length: 210 elements.
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
Each of the elements has to be repeated
exactly 64 times (on 64 consecutive samples).
The whole table takes: 64 * 210 = 13440 samples.
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
When AM = 1 data is used directly
When AM = 0 data is divided by 4 before being used (losing precision is important)
Normalize line endings
2016-03-01 15:47:10 +00:00
*/
#define LFO_AM_TAB_ELEMENTS 210
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static const uint8_t lfo_am_table[LFO_AM_TAB_ELEMENTS] = {
Normalize line endings
2016-03-01 15:47:10 +00:00
0,0,0,0,0,0,0,
1,1,1,1,
2,2,2,2,
3,3,3,3,
4,4,4,4,
5,5,5,5,
6,6,6,6,
7,7,7,7,
8,8,8,8,
9,9,9,9,
10,10,10,10,
11,11,11,11,
12,12,12,12,
13,13,13,13,
14,14,14,14,
15,15,15,15,
16,16,16,16,
17,17,17,17,
18,18,18,18,
19,19,19,19,
20,20,20,20,
21,21,21,21,
22,22,22,22,
23,23,23,23,
24,24,24,24,
25,25,25,25,
26,26,26,
25,25,25,25,
24,24,24,24,
23,23,23,23,
22,22,22,22,
21,21,21,21,
20,20,20,20,
19,19,19,19,
18,18,18,18,
17,17,17,17,
16,16,16,16,
15,15,15,15,
14,14,14,14,
13,13,13,13,
12,12,12,12,
11,11,11,11,
10,10,10,10,
9,9,9,9,
8,8,8,8,
7,7,7,7,
6,6,6,6,
5,5,5,5,
4,4,4,4,
3,3,3,3,
2,2,2,2,
1,1,1,1
};
/* LFO Phase Modulation table (verified on real YM3812) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static const int8_t lfo_pm_table[8*8*2] = {
Normalize line endings
2016-03-01 15:47:10 +00:00
/* FNUM2/FNUM = 00 0xxxxxxx (0x0000) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
0, 0, 0, 0, 0, 0, 0, 0, /*LFO PM depth = 0*/
0, 0, 0, 0, 0, 0, 0, 0, /*LFO PM depth = 1*/
Normalize line endings
2016-03-01 15:47:10 +00:00
/* FNUM2/FNUM = 00 1xxxxxxx (0x0080) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
0, 0, 0, 0, 0, 0, 0, 0, /*LFO PM depth = 0*/
1, 0, 0, 0,-1, 0, 0, 0, /*LFO PM depth = 1*/
Normalize line endings
2016-03-01 15:47:10 +00:00
/* FNUM2/FNUM = 01 0xxxxxxx (0x0100) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
1, 0, 0, 0,-1, 0, 0, 0, /*LFO PM depth = 0*/
2, 1, 0,-1,-2,-1, 0, 1, /*LFO PM depth = 1*/
Normalize line endings
2016-03-01 15:47:10 +00:00
/* FNUM2/FNUM = 01 1xxxxxxx (0x0180) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
1, 0, 0, 0,-1, 0, 0, 0, /*LFO PM depth = 0*/
3, 1, 0,-1,-3,-1, 0, 1, /*LFO PM depth = 1*/
Normalize line endings
2016-03-01 15:47:10 +00:00
/* FNUM2/FNUM = 10 0xxxxxxx (0x0200) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
2, 1, 0,-1,-2,-1, 0, 1, /*LFO PM depth = 0*/
4, 2, 0,-2,-4,-2, 0, 2, /*LFO PM depth = 1*/
Normalize line endings
2016-03-01 15:47:10 +00:00
/* FNUM2/FNUM = 10 1xxxxxxx (0x0280) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
2, 1, 0,-1,-2,-1, 0, 1, /*LFO PM depth = 0*/
5, 2, 0,-2,-5,-2, 0, 2, /*LFO PM depth = 1*/
Normalize line endings
2016-03-01 15:47:10 +00:00
/* FNUM2/FNUM = 11 0xxxxxxx (0x0300) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
3, 1, 0,-1,-3,-1, 0, 1, /*LFO PM depth = 0*/
6, 3, 0,-3,-6,-3, 0, 3, /*LFO PM depth = 1*/
Normalize line endings
2016-03-01 15:47:10 +00:00
/* FNUM2/FNUM = 11 1xxxxxxx (0x0380) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
3, 1, 0,-1,-3,-1, 0, 1, /*LFO PM depth = 0*/
7, 3, 0,-3,-7,-3, 0, 3 /*LFO PM depth = 1*/
Normalize line endings
2016-03-01 15:47:10 +00:00
};
/* work table */
static signed int phase_modulation; /* phase modulation input (SLOT 2) */
static signed int output;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static uint32_t LFO_AM;
static int32_t LFO_PM;
Normalize line endings
2016-03-01 15:47:10 +00:00
static bool CalcVoice (FM_OPL *OPL, int voice, float *buffer, int length);
static bool CalcRhythm (FM_OPL *OPL, float *buffer, int length);
/* status set and IRQ handling */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void OPL_STATUS_SET(FM_OPL *OPL,int flag)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
/* set status flag */
OPL->status |= flag;
if(!(OPL->status & 0x80))
{
if(OPL->status & OPL->statusmask)
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
{ /* IRQ on */
Normalize line endings
2016-03-01 15:47:10 +00:00
OPL->status |= 0x80;
}
}
}
/* status reset and IRQ handling */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void OPL_STATUS_RESET(FM_OPL *OPL,int flag)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
/* reset status flag */
OPL->status &=~flag;
if((OPL->status & 0x80))
{
if (!(OPL->status & OPL->statusmask) )
{
OPL->status &= 0x7f;
}
}
}
/* IRQ mask set */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void OPL_STATUSMASK_SET(FM_OPL *OPL,int flag)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
OPL->statusmask = flag;
/* IRQ handling check */
OPL_STATUS_SET(OPL,0);
OPL_STATUS_RESET(OPL,0);
}
/* advance LFO to next sample */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void advance_lfo(FM_OPL *OPL)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t tmp;
Normalize line endings
2016-03-01 15:47:10 +00:00
/* LFO */
OPL->lfo_am_cnt += OPL->lfo_am_inc;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
if (OPL->lfo_am_cnt >= (uint32_t)(LFO_AM_TAB_ELEMENTS<<LFO_SH) ) /* lfo_am_table is 210 elements long */
Normalize line endings
2016-03-01 15:47:10 +00:00
OPL->lfo_am_cnt -= (LFO_AM_TAB_ELEMENTS<<LFO_SH);
tmp = lfo_am_table[ OPL->lfo_am_cnt >> LFO_SH ];
if (OPL->lfo_am_depth)
LFO_AM = tmp;
else
LFO_AM = tmp>>2;
OPL->lfo_pm_cnt += OPL->lfo_pm_inc;
LFO_PM = ((OPL->lfo_pm_cnt>>LFO_SH) & 7) | OPL->lfo_pm_depth_range;
}
/* advance to next sample */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void advance(FM_OPL *OPL, int loch, int hich)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
OPL_CH *CH;
OPL_SLOT *op;
int i;
OPL->eg_timer += OPL->eg_timer_add;
loch *= 2;
hich *= 2;
while (OPL->eg_timer >= OPL->eg_timer_overflow)
{
OPL->eg_timer -= OPL->eg_timer_overflow;
OPL->eg_cnt++;
for (i = loch; i <= hich + 1; i++)
{
CH = &OPL->P_CH[i/2];
op = &CH->SLOT[i&1];
/* Envelope Generator */
switch(op->state)
{
case EG_ATT: /* attack phase */
if ( !(OPL->eg_cnt & ((1<<op->eg_sh_ar)-1) ) )
{
op->volume += (~op->volume *
(eg_inc[op->eg_sel_ar + ((OPL->eg_cnt>>op->eg_sh_ar)&7)])
) >>3;
if (op->volume <= MIN_ATT_INDEX)
{
op->volume = MIN_ATT_INDEX;
op->state = EG_DEC;
}
}
break;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
case EG_DEC: /* decay phase */
Normalize line endings
2016-03-01 15:47:10 +00:00
if ( !(OPL->eg_cnt & ((1<<op->eg_sh_dr)-1) ) )
{
op->volume += eg_inc[op->eg_sel_dr + ((OPL->eg_cnt>>op->eg_sh_dr)&7)];
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
if ( op->volume >= (int32_t)op->sl )
Normalize line endings
2016-03-01 15:47:10 +00:00
op->state = EG_SUS;
}
break;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
case EG_SUS: /* sustain phase */
Normalize line endings
2016-03-01 15:47:10 +00:00
/* this is important behaviour:
one can change percusive/non-percussive modes on the fly and
the chip will remain in sustain phase - verified on real YM3812 */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
if(op->eg_type) /* non-percussive mode */
Normalize line endings
2016-03-01 15:47:10 +00:00
{
/* do nothing */
}
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
else /* percussive mode */
Normalize line endings
2016-03-01 15:47:10 +00:00
{
/* during sustain phase chip adds Release Rate (in percussive mode) */
if ( !(OPL->eg_cnt & ((1<<op->eg_sh_rr)-1) ) )
{
op->volume += eg_inc[op->eg_sel_rr + ((OPL->eg_cnt>>op->eg_sh_rr)&7)];
if ( op->volume >= MAX_ATT_INDEX )
op->volume = MAX_ATT_INDEX;
}
/* else do nothing in sustain phase */
}
break;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
case EG_REL: /* release phase */
Normalize line endings
2016-03-01 15:47:10 +00:00
if ( !(OPL->eg_cnt & ((1<<op->eg_sh_rr)-1) ) )
{
op->volume += eg_inc[op->eg_sel_rr + ((OPL->eg_cnt>>op->eg_sh_rr)&7)];
if ( op->volume >= MAX_ATT_INDEX )
{
op->volume = MAX_ATT_INDEX;
op->state = EG_OFF;
}
}
break;
default:
break;
}
/* Phase Generator */
if(op->vib)
{
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t block;
Normalize line endings
2016-03-01 15:47:10 +00:00
unsigned int block_fnum = CH->block_fnum;
unsigned int fnum_lfo = (block_fnum&0x0380) >> 7;
signed int lfo_fn_table_index_offset = lfo_pm_table[LFO_PM + 16*fnum_lfo ];
if (lfo_fn_table_index_offset) /* LFO phase modulation active */
{
block_fnum += lfo_fn_table_index_offset;
block = (block_fnum&0x1c00) >> 10;
op->Cnt += (OPL->fn_tab[block_fnum&0x03ff] >> (7-block)) * op->mul;
}
else /* LFO phase modulation = zero */
{
op->Cnt += op->Incr;
}
}
else /* LFO phase modulation disabled for this operator */
{
op->Cnt += op->Incr;
}
}
}
}
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void advance_noise(FM_OPL *OPL)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
int i;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
/* The Noise Generator of the YM3812 is 23-bit shift register.
* Period is equal to 2^23-2 samples.
* Register works at sampling frequency of the chip, so output
* can change on every sample.
Normalize line endings
2016-03-01 15:47:10 +00:00
*
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
* Output of the register and input to the bit 22 is:
* bit0 XOR bit14 XOR bit15 XOR bit22
Normalize line endings
2016-03-01 15:47:10 +00:00
*
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
* Simply use bit 22 as the noise output.
Normalize line endings
2016-03-01 15:47:10 +00:00
*/
OPL->noise_p += OPL->noise_f;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
i = OPL->noise_p >> FREQ_SH; /* number of events (shifts of the shift register) */
Normalize line endings
2016-03-01 15:47:10 +00:00
OPL->noise_p &= FREQ_MASK;
while (i)
{
/*
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t j;
Normalize line endings
2016-03-01 15:47:10 +00:00
j = ( (OPL->noise_rng) ^ (OPL->noise_rng>>14) ^ (OPL->noise_rng>>15) ^ (OPL->noise_rng>>22) ) & 1;
OPL->noise_rng = (j<<22) | (OPL->noise_rng>>1);
*/
/*
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
Instead of doing all the logic operations above, we
use a trick here (and use bit 0 as the noise output).
The difference is only that the noise bit changes one
step ahead. This doesn't matter since we don't know
Normalize line endings
2016-03-01 15:47:10 +00:00
what is real state of the noise_rng after the reset.
*/
if (OPL->noise_rng & 1) OPL->noise_rng ^= 0x800302;
OPL->noise_rng >>= 1;
i--;
}
}
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline signed int op_calc(uint32_t phase, unsigned int env, signed int pm, unsigned int wave_tab)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t p;
Normalize line endings
2016-03-01 15:47:10 +00:00
p = (env<<4) + sin_tab[wave_tab + ((((signed int)((phase & ~FREQ_MASK) + (pm<<16))) >> FREQ_SH ) & SIN_MASK) ];
if (p >= TL_TAB_LEN)
return 0;
return tl_tab[p];
}
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline signed int op_calc1(uint32_t phase, unsigned int env, signed int pm, unsigned int wave_tab)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t p;
Normalize line endings
2016-03-01 15:47:10 +00:00
p = (env<<4) + sin_tab[wave_tab + ((((signed int)((phase & ~FREQ_MASK) + pm )) >> FREQ_SH ) & SIN_MASK) ];
if (p >= TL_TAB_LEN)
return 0;
return tl_tab[p];
}
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
#define volume_calc(OP) ((OP)->TLL + ((uint32_t)(OP)->volume) + (LFO_AM & (OP)->AMmask))
Normalize line endings
2016-03-01 15:47:10 +00:00
/* calculate output */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline float OPL_CALC_CH( OPL_CH *CH )
Normalize line endings
2016-03-01 15:47:10 +00:00
{
OPL_SLOT *SLOT;
unsigned int env;
signed int out;
phase_modulation = 0;
/* SLOT 1 */
SLOT = &CH->SLOT[SLOT1];
env = volume_calc(SLOT);
out = SLOT->op1_out[0] + SLOT->op1_out[1];
SLOT->op1_out[0] = SLOT->op1_out[1];
*SLOT->connect1 += SLOT->op1_out[0];
SLOT->op1_out[1] = 0;
if( env < ENV_QUIET )
{
if (!SLOT->FB)
out = 0;
SLOT->op1_out[1] = op_calc1(SLOT->Cnt, env, (out<<SLOT->FB), SLOT->wavetable );
}
/* SLOT 2 */
SLOT++;
env = volume_calc(SLOT);
if( env < ENV_QUIET )
{
output += op_calc(SLOT->Cnt, env, phase_modulation, SLOT->wavetable);
/* [RH] Convert to floating point. */
return float(output) / 10240;
}
return 0;
}
/*
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
operators used in the rhythm sounds generation process:
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
Envelope Generator:
Normalize line endings
2016-03-01 15:47:10 +00:00
channel operator register number Bass High Snare Tom Top
/ slot number TL ARDR SLRR Wave Drum Hat Drum Tom Cymbal
6 / 0 12 50 70 90 f0 +
6 / 1 15 53 73 93 f3 +
7 / 0 13 51 71 91 f1 +
7 / 1 16 54 74 94 f4 +
8 / 0 14 52 72 92 f2 +
8 / 1 17 55 75 95 f5 +
Phase Generator:
channel operator register number Bass High Snare Tom Top
/ slot number MULTIPLE Drum Hat Drum Tom Cymbal
6 / 0 12 30 +
6 / 1 15 33 +
7 / 0 13 31 + + +
7 / 1 16 34 ----- n o t u s e d -----
8 / 0 14 32 +
8 / 1 17 35 + +
channel operator register number Bass High Snare Tom Top
number number BLK/FNUM2 FNUM Drum Hat Drum Tom Cymbal
6 12,15 B6 A6 +
7 13,16 B7 A7 + + +
8 14,17 B8 A8 + + +
*/
/* calculate rhythm */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void OPL_CALC_RH( OPL_CH *CH, unsigned int noise )
Normalize line endings
2016-03-01 15:47:10 +00:00
{
OPL_SLOT *SLOT;
signed int out;
unsigned int env;
/* Bass Drum (verified on real YM3812):
- depends on the channel 6 'connect' register:
when connect = 0 it works the same as in normal (non-rhythm) mode (op1->op2->out)
when connect = 1 _only_ operator 2 is present on output (op2->out), operator 1 is ignored
- output sample always is multiplied by 2
*/
phase_modulation = 0;
/* SLOT 1 */
SLOT = &CH[6].SLOT[SLOT1];
env = volume_calc(SLOT);
out = SLOT->op1_out[0] + SLOT->op1_out[1];
SLOT->op1_out[0] = SLOT->op1_out[1];
if (!SLOT->CON)
phase_modulation = SLOT->op1_out[0];
/* else ignore output of operator 1 */
SLOT->op1_out[1] = 0;
if( env < ENV_QUIET )
{
if (!SLOT->FB)
out = 0;
SLOT->op1_out[1] = op_calc1(SLOT->Cnt, env, (out<<SLOT->FB), SLOT->wavetable );
}
/* SLOT 2 */
SLOT++;
env = volume_calc(SLOT);
if( env < ENV_QUIET )
output += op_calc(SLOT->Cnt, env, phase_modulation, SLOT->wavetable) * 2;
/* Phase generation is based on: */
/* HH (13) channel 7->slot 1 combined with channel 8->slot 2 (same combination as TOP CYMBAL but different output phases) */
/* SD (16) channel 7->slot 1 */
/* TOM (14) channel 8->slot 1 */
/* TOP (17) channel 7->slot 1 combined with channel 8->slot 2 (same combination as HIGH HAT but different output phases) */
/* Envelope generation based on: */
/* HH channel 7->slot1 */
/* SD channel 7->slot2 */
/* TOM channel 8->slot1 */
/* TOP channel 8->slot2 */
/* The following formulas can be well optimized.
I leave them in direct form for now (in case I've missed something).
*/
/* High Hat (verified on real YM3812) */
env = volume_calc(&CH[7].SLOT[SLOT1]);
if( env < ENV_QUIET )
{
/* high hat phase generation:
phase = d0 or 234 (based on frequency only)
phase = 34 or 2d0 (based on noise)
*/
/* base frequency derived from operator 1 in channel 7 */
unsigned char bit7 = ((CH[7].SLOT[SLOT1].Cnt>>FREQ_SH)>>7)&1;
unsigned char bit3 = ((CH[7].SLOT[SLOT1].Cnt>>FREQ_SH)>>3)&1;
unsigned char bit2 = ((CH[7].SLOT[SLOT1].Cnt>>FREQ_SH)>>2)&1;
unsigned char res1 = (bit2 ^ bit7) | bit3;
/* when res1 = 0 phase = 0x000 | 0xd0; */
/* when res1 = 1 phase = 0x200 | (0xd0>>2); */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t phase = res1 ? (0x200|(0xd0>>2)) : 0xd0;
Normalize line endings
2016-03-01 15:47:10 +00:00
/* enable gate based on frequency of operator 2 in channel 8 */
unsigned char bit5e= ((CH[8].SLOT[SLOT2].Cnt>>FREQ_SH)>>5)&1;
unsigned char bit3e= ((CH[8].SLOT[SLOT2].Cnt>>FREQ_SH)>>3)&1;
unsigned char res2 = (bit3e ^ bit5e);
/* when res2 = 0 pass the phase from calculation above (res1); */
/* when res2 = 1 phase = 0x200 | (0xd0>>2); */
if (res2)
phase = (0x200|(0xd0>>2));
/* when phase & 0x200 is set and noise=1 then phase = 0x200|0xd0 */
/* when phase & 0x200 is set and noise=0 then phase = 0x200|(0xd0>>2), ie no change */
if (phase&0x200)
{
if (noise)
phase = 0x200|0xd0;
}
else
/* when phase & 0x200 is clear and noise=1 then phase = 0xd0>>2 */
/* when phase & 0x200 is clear and noise=0 then phase = 0xd0, ie no change */
{
if (noise)
phase = 0xd0>>2;
}
output += op_calc(phase<<FREQ_SH, env, 0, CH[7].SLOT[SLOT1].wavetable) * 2;
}
/* Snare Drum (verified on real YM3812) */
env = volume_calc(&CH[7].SLOT[SLOT2]);
if( env < ENV_QUIET )
{
/* base frequency derived from operator 1 in channel 7 */
unsigned char bit8 = ((CH[7].SLOT[SLOT1].Cnt>>FREQ_SH)>>8)&1;
/* when bit8 = 0 phase = 0x100; */
/* when bit8 = 1 phase = 0x200; */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t phase = bit8 ? 0x200 : 0x100;
Normalize line endings
2016-03-01 15:47:10 +00:00
/* Noise bit XOR'es phase by 0x100 */
/* when noisebit = 0 pass the phase from calculation above */
/* when noisebit = 1 phase ^= 0x100; */
/* in other words: phase ^= (noisebit<<8); */
if (noise)
phase ^= 0x100;
output += op_calc(phase<<FREQ_SH, env, 0, CH[7].SLOT[SLOT2].wavetable) * 2;
}
/* Tom Tom (verified on real YM3812) */
env = volume_calc(&CH[8].SLOT[SLOT1]);
if( env < ENV_QUIET )
output += op_calc(CH[8].SLOT[SLOT1].Cnt, env, 0, CH[8].SLOT[SLOT2].wavetable) * 2;
/* Top Cymbal (verified on real YM3812) */
env = volume_calc(&CH[8].SLOT[SLOT2]);
if( env < ENV_QUIET )
{
/* base frequency derived from operator 1 in channel 7 */
unsigned char bit7 = ((CH[7].SLOT[SLOT1].Cnt>>FREQ_SH)>>7)&1;
unsigned char bit3 = ((CH[7].SLOT[SLOT1].Cnt>>FREQ_SH)>>3)&1;
unsigned char bit2 = ((CH[7].SLOT[SLOT1].Cnt>>FREQ_SH)>>2)&1;
unsigned char res1 = (bit2 ^ bit7) | bit3;
/* when res1 = 0 phase = 0x000 | 0x100; */
/* when res1 = 1 phase = 0x200 | 0x100; */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t phase = res1 ? 0x300 : 0x100;
Normalize line endings
2016-03-01 15:47:10 +00:00
/* enable gate based on frequency of operator 2 in channel 8 */
unsigned char bit5e= ((CH[8].SLOT[SLOT2].Cnt>>FREQ_SH)>>5)&1;
unsigned char bit3e= ((CH[8].SLOT[SLOT2].Cnt>>FREQ_SH)>>3)&1;
unsigned char res2 = (bit3e ^ bit5e);
/* when res2 = 0 pass the phase from calculation above (res1); */
/* when res2 = 1 phase = 0x200 | 0x100; */
if (res2)
phase = 0x300;
output += op_calc(phase<<FREQ_SH, env, 0, CH[8].SLOT[SLOT2].wavetable) * 2;
}
}
/* generic table initialize */
static void init_tables(void)
{
signed int i,x;
signed int n;
double o,m;
/* We only need to do this once. */
static bool did_init = false;
if (did_init)
{
return;
}
for (x=0; x<TL_RES_LEN; x++)
{
m = (1<<16) / pow(2.0, (x+1) * (ENV_STEP/4.0) / 8.0);
m = floor(m);
/* we never reach (1<<16) here due to the (x+1) */
/* result fits within 16 bits at maximum */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
n = (int)m; /* 16 bits here */
n >>= 4; /* 12 bits here */
Normalize line endings
2016-03-01 15:47:10 +00:00
n = (n+1)>>1; /* round to nearest */
/* 11 bits here (rounded) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
n <<= 1; /* 12 bits here (as in real chip) */
Normalize line endings
2016-03-01 15:47:10 +00:00
tl_tab[ x*2 + 0 ] = n;
tl_tab[ x*2 + 1 ] = -tl_tab[ x*2 + 0 ];
for (i=1; i<12; i++)
{
tl_tab[ x*2+0 + i*2*TL_RES_LEN ] = tl_tab[ x*2+0 ]>>i;
tl_tab[ x*2+1 + i*2*TL_RES_LEN ] = -tl_tab[ x*2+0 ]>>i;
}
}
for (i=0; i<SIN_LEN; i++)
{
/* non-standard sinus */
m = sin( ((i*2)+1) * PI / SIN_LEN ); /* checked against the real chip */
/* we never reach zero here due to ((i*2)+1) */
if (m>0.0)
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
o = 8*log(1.0/m)/log(2.0); /* convert to 'decibels' */
Normalize line endings
2016-03-01 15:47:10 +00:00
else
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
o = 8*log(-1.0/m)/log(2.0); /* convert to 'decibels' */
Normalize line endings
2016-03-01 15:47:10 +00:00
o = o / (ENV_STEP/4);
n = (int)(2.0*o);
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
if (n&1) /* round to nearest */
Normalize line endings
2016-03-01 15:47:10 +00:00
n = (n>>1)+1;
else
n = n>>1;
sin_tab[ i ] = n*2 + (m>=0.0? 0: 1 );
}
for (i=0; i<SIN_LEN; i++)
{
/* waveform 1: __ __ */
/* / \____/ \____*/
/* output only first half of the sinus waveform (positive one) */
if (i & (1<<(SIN_BITS-1)) )
sin_tab[1*SIN_LEN+i] = TL_TAB_LEN;
else
sin_tab[1*SIN_LEN+i] = sin_tab[i];
/* waveform 2: __ __ __ __ */
/* / \/ \/ \/ \*/
/* abs(sin) */
sin_tab[2*SIN_LEN+i] = sin_tab[i & (SIN_MASK>>1) ];
/* waveform 3: _ _ _ _ */
/* / |_/ |_/ |_/ |_*/
/* abs(output only first quarter of the sinus waveform) */
if (i & (1<<(SIN_BITS-2)) )
sin_tab[3*SIN_LEN+i] = TL_TAB_LEN;
else
sin_tab[3*SIN_LEN+i] = sin_tab[i & (SIN_MASK>>2)];
}
did_init = true;
}
static void OPL_initalize(FM_OPL *OPL)
{
int i;
/* make fnumber -> increment counter table */
for( i=0 ; i < 1024 ; i++ )
{
/* opn phase increment counter = 20bit */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
OPL->fn_tab[i] = (uint32_t)( (double)i * 64 * OPL_FREQBASE * (1<<(FREQ_SH-10)) ); /* -10 because chip works with 10.10 fixed point, while we use 16.16 */
Normalize line endings
2016-03-01 15:47:10 +00:00
}
/* Amplitude modulation: 27 output levels (triangle waveform); 1 level takes one of: 192, 256 or 448 samples */
/* One entry from LFO_AM_TABLE lasts for 64 samples */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
OPL->lfo_am_inc = uint32_t((1.0 / 64.0 ) * (1<<LFO_SH) * OPL_FREQBASE);
Normalize line endings
2016-03-01 15:47:10 +00:00
/* Vibrato: 8 output levels (triangle waveform); 1 level takes 1024 samples */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
OPL->lfo_pm_inc = uint32_t((1.0 / 1024.0) * (1<<LFO_SH) * OPL_FREQBASE);
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
OPL->eg_timer_add = uint32_t((1<<EG_SH) * OPL_FREQBASE);
OPL->eg_timer_overflow = uint32_t(( 1 ) * (1<<EG_SH));
Normalize line endings
2016-03-01 15:47:10 +00:00
// [RH] Support full MIDI panning. (But default to mono and center panning.)
OPL->IsStereo = false;
for (int i = 0; i < 9; ++i)
{
OPL->P_CH[i].LeftVol = (float)CENTER_PANNING_POWER;
OPL->P_CH[i].RightVol = (float)CENTER_PANNING_POWER;
}
}
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void FM_KEYON(OPL_SLOT *SLOT, uint32_t key_set)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
if( !SLOT->key )
{
/* restart Phase Generator */
SLOT->Cnt = 0;
/* phase -> Attack */
SLOT->state = EG_ATT;
}
SLOT->key |= key_set;
}
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void FM_KEYOFF(OPL_SLOT *SLOT, uint32_t key_clr)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
if( SLOT->key )
{
SLOT->key &= key_clr;
if( !SLOT->key )
{
/* phase -> Release */
if (SLOT->state>EG_REL)
SLOT->state = EG_REL;
}
}
}
/* update phase increment counter of operator (also update the EG rates if necessary) */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void CALC_FCSLOT(OPL_CH *CH,OPL_SLOT *SLOT)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
int ksr;
/* (frequency) phase increment counter */
SLOT->Incr = CH->fc * SLOT->mul;
ksr = CH->kcode >> SLOT->KSR;
if( SLOT->ksr != ksr )
{
SLOT->ksr = ksr;
/* calculate envelope generator rates */
if ((SLOT->ar + SLOT->ksr) < 16+62)
{
SLOT->eg_sh_ar = eg_rate_shift [SLOT->ar + SLOT->ksr ];
SLOT->eg_sel_ar = eg_rate_select[SLOT->ar + SLOT->ksr ];
}
else
{
SLOT->eg_sh_ar = 0;
SLOT->eg_sel_ar = 13*RATE_STEPS;
}
SLOT->eg_sh_dr = eg_rate_shift [SLOT->dr + SLOT->ksr ];
SLOT->eg_sel_dr = eg_rate_select[SLOT->dr + SLOT->ksr ];
SLOT->eg_sh_rr = eg_rate_shift [SLOT->rr + SLOT->ksr ];
SLOT->eg_sel_rr = eg_rate_select[SLOT->rr + SLOT->ksr ];
}
}
/* set multi,am,vib,EG-TYP,KSR,mul */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void set_mul(FM_OPL *OPL,int slot,int v)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
OPL_CH *CH = &OPL->P_CH[slot/2];
OPL_SLOT *SLOT = &CH->SLOT[slot&1];
SLOT->mul = mul_tab[v&0x0f];
SLOT->KSR = (v&0x10) ? 0 : 2;
SLOT->eg_type = (v&0x20);
SLOT->vib = (v&0x40);
SLOT->AMmask = (v&0x80) ? ~0 : 0;
CALC_FCSLOT(CH,SLOT);
}
/* set ksl & tl */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void set_ksl_tl(FM_OPL *OPL,int slot,int v)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
OPL_CH *CH = &OPL->P_CH[slot/2];
OPL_SLOT *SLOT = &CH->SLOT[slot&1];
SLOT->ksl = ksl_shift[v >> 6];
SLOT->TL = (v&0x3f)<<(ENV_BITS-1-7); /* 7 bits TL (bit 6 = always 0) */
SLOT->TLL = SLOT->TL + (CH->ksl_base>>SLOT->ksl);
}
/* set attack rate & decay rate */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void set_ar_dr(FM_OPL *OPL,int slot,int v)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
OPL_CH *CH = &OPL->P_CH[slot/2];
OPL_SLOT *SLOT = &CH->SLOT[slot&1];
SLOT->ar = (v>>4) ? 16 + ((v>>4) <<2) : 0;
if ((SLOT->ar + SLOT->ksr) < 16+62)
{
SLOT->eg_sh_ar = eg_rate_shift [SLOT->ar + SLOT->ksr ];
SLOT->eg_sel_ar = eg_rate_select[SLOT->ar + SLOT->ksr ];
}
else
{
SLOT->eg_sh_ar = 0;
SLOT->eg_sel_ar = 13*RATE_STEPS;
}
SLOT->dr = (v&0x0f)? 16 + ((v&0x0f)<<2) : 0;
SLOT->eg_sh_dr = eg_rate_shift [SLOT->dr + SLOT->ksr ];
SLOT->eg_sel_dr = eg_rate_select[SLOT->dr + SLOT->ksr ];
}
/* set sustain level & release rate */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
static inline void set_sl_rr(FM_OPL *OPL,int slot,int v)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
OPL_CH *CH = &OPL->P_CH[slot/2];
OPL_SLOT *SLOT = &CH->SLOT[slot&1];
SLOT->sl = sl_tab[ v>>4 ];
SLOT->rr = (v&0x0f)? 16 + ((v&0x0f)<<2) : 0;
SLOT->eg_sh_rr = eg_rate_shift [SLOT->rr + SLOT->ksr ];
SLOT->eg_sel_rr = eg_rate_select[SLOT->rr + SLOT->ksr ];
}
/* write a value v to register r on OPL chip */
- rewrote the OPL middle layer to remove the MusLib code. The new version keeps the non-MusLib code of both files and replaces most of the rest with code from Chocolate Doom.
2017-04-15 23:36:53 +00:00
static void WriteRegister(FM_OPL *OPL, int r, int v)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
OPL_CH *CH;
int slot;
int block_fnum;
/* adjust bus to 8 bits */
r &= 0xff;
v &= 0xff;
switch(r&0xe0)
{
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
case 0x00: /* 00-1f:control */
Normalize line endings
2016-03-01 15:47:10 +00:00
switch(r&0x1f)
{
case 0x01: /* waveform select enable */
OPL->wavesel = v&0x20;
break;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
case 0x02: /* Timer 1 */
Normalize line endings
2016-03-01 15:47:10 +00:00
OPL->T[0] = (256-v)*4;
break;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
case 0x03: /* Timer 2 */
Normalize line endings
2016-03-01 15:47:10 +00:00
OPL->T[1] = (256-v)*16;
break;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
case 0x04: /* IRQ clear / mask and Timer enable */
Normalize line endings
2016-03-01 15:47:10 +00:00
if(v&0x80)
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
{ /* IRQ flag clear */
Normalize line endings
2016-03-01 15:47:10 +00:00
OPL_STATUS_RESET(OPL,0x7f-0x08); /* don't reset BFRDY flag or we will have to call deltat module to set the flag */
}
else
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
{ /* set IRQ mask ,timer enable*/
uint8_t st1 = v&1;
uint8_t st2 = (v>>1)&1;
Normalize line endings
2016-03-01 15:47:10 +00:00
/* IRQRST,T1MSK,t2MSK,EOSMSK,BRMSK,x,ST2,ST1 */
OPL_STATUS_RESET(OPL, v & (0x78-0x08) );
OPL_STATUSMASK_SET(OPL, (~v) & 0x78 );
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
Normalize line endings
2016-03-01 15:47:10 +00:00
/* timer 2 */
if(OPL->st[1] != st2)
{
OPL->st[1] = st2;
}
/* timer 1 */
if(OPL->st[0] != st1)
{
OPL->st[0] = st1;
}
}
break;
case 0x08: /* MODE,DELTA-T control 2 : CSM,NOTESEL,x,x,smpl,da/ad,64k,rom */
OPL->mode = v;
break;
}
break;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
case 0x20: /* am ON, vib ON, ksr, eg_type, mul */
Normalize line endings
2016-03-01 15:47:10 +00:00
slot = slot_array[r&0x1f];
if(slot < 0) return;
set_mul(OPL,slot,v);
break;
case 0x40:
slot = slot_array[r&0x1f];
if(slot < 0) return;
set_ksl_tl(OPL,slot,v);
break;
case 0x60:
slot = slot_array[r&0x1f];
if(slot < 0) return;
set_ar_dr(OPL,slot,v);
break;
case 0x80:
slot = slot_array[r&0x1f];
if(slot < 0) return;
set_sl_rr(OPL,slot,v);
break;
case 0xa0:
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
if (r == 0xbd) /* am depth, vibrato depth, r,bd,sd,tom,tc,hh */
Normalize line endings
2016-03-01 15:47:10 +00:00
{
OPL->lfo_am_depth = v & 0x80;
OPL->lfo_pm_depth_range = (v&0x40) ? 8 : 0;
OPL->rhythm = v&0x3f;
if(OPL->rhythm&0x20)
{
/* BD key on/off */
if(v&0x10)
{
FM_KEYON (&OPL->P_CH[6].SLOT[SLOT1], 2);
FM_KEYON (&OPL->P_CH[6].SLOT[SLOT2], 2);
}
else
{
FM_KEYOFF(&OPL->P_CH[6].SLOT[SLOT1],~2);
FM_KEYOFF(&OPL->P_CH[6].SLOT[SLOT2],~2);
}
/* HH key on/off */
if(v&0x01) FM_KEYON (&OPL->P_CH[7].SLOT[SLOT1], 2);
else FM_KEYOFF(&OPL->P_CH[7].SLOT[SLOT1],~2);
/* SD key on/off */
if(v&0x08) FM_KEYON (&OPL->P_CH[7].SLOT[SLOT2], 2);
else FM_KEYOFF(&OPL->P_CH[7].SLOT[SLOT2],~2);
/* TOM key on/off */
if(v&0x04) FM_KEYON (&OPL->P_CH[8].SLOT[SLOT1], 2);
else FM_KEYOFF(&OPL->P_CH[8].SLOT[SLOT1],~2);
/* TOP-CY key on/off */
if(v&0x02) FM_KEYON (&OPL->P_CH[8].SLOT[SLOT2], 2);
else FM_KEYOFF(&OPL->P_CH[8].SLOT[SLOT2],~2);
}
else
{
/* BD key off */
FM_KEYOFF(&OPL->P_CH[6].SLOT[SLOT1],~2);
FM_KEYOFF(&OPL->P_CH[6].SLOT[SLOT2],~2);
/* HH key off */
FM_KEYOFF(&OPL->P_CH[7].SLOT[SLOT1],~2);
/* SD key off */
FM_KEYOFF(&OPL->P_CH[7].SLOT[SLOT2],~2);
/* TOM key off */
FM_KEYOFF(&OPL->P_CH[8].SLOT[SLOT1],~2);
/* TOP-CY off */
FM_KEYOFF(&OPL->P_CH[8].SLOT[SLOT2],~2);
}
return;
}
/* keyon,block,fnum */
if( (r&0x0f) > 8) return;
CH = &OPL->P_CH[r&0x0f];
if(!(r&0x10))
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
{ /* a0-a8 */
Normalize line endings
2016-03-01 15:47:10 +00:00
block_fnum = (CH->block_fnum&0x1f00) | v;
}
else
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
{ /* b0-b8 */
Normalize line endings
2016-03-01 15:47:10 +00:00
block_fnum = ((v&0x1f)<<8) | (CH->block_fnum&0xff);
if(v&0x20)
{
FM_KEYON (&CH->SLOT[SLOT1], 1);
FM_KEYON (&CH->SLOT[SLOT2], 1);
}
else
{
FM_KEYOFF(&CH->SLOT[SLOT1],~1);
FM_KEYOFF(&CH->SLOT[SLOT2],~1);
}
}
/* update */
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
if(CH->block_fnum != (uint32_t)block_fnum)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t block = block_fnum >> 10;
Normalize line endings
2016-03-01 15:47:10 +00:00
CH->block_fnum = block_fnum;
CH->ksl_base = ksl_tab[block_fnum>>6];
CH->fc = OPL->fn_tab[block_fnum&0x03ff] >> (7-block);
/* BLK 2,1,0 bits -> bits 3,2,1 of kcode */
CH->kcode = (CH->block_fnum&0x1c00)>>9;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
/* the info below is actually opposite to what is stated in the Manuals (verifed on real YM3812) */
Normalize line endings
2016-03-01 15:47:10 +00:00
/* if notesel == 0 -> lsb of kcode is bit 10 (MSB) of fnum */
/* if notesel == 1 -> lsb of kcode is bit 9 (MSB-1) of fnum */
if (OPL->mode&0x40)
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
CH->kcode |= (CH->block_fnum&0x100)>>8; /* notesel == 1 */
Normalize line endings
2016-03-01 15:47:10 +00:00
else
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
CH->kcode |= (CH->block_fnum&0x200)>>9; /* notesel == 0 */
Normalize line endings
2016-03-01 15:47:10 +00:00
/* refresh Total Level in both SLOTs of this channel */
CH->SLOT[SLOT1].TLL = CH->SLOT[SLOT1].TL + (CH->ksl_base>>CH->SLOT[SLOT1].ksl);
CH->SLOT[SLOT2].TLL = CH->SLOT[SLOT2].TL + (CH->ksl_base>>CH->SLOT[SLOT2].ksl);
/* refresh frequency counter in both SLOTs of this channel */
CALC_FCSLOT(CH,&CH->SLOT[SLOT1]);
CALC_FCSLOT(CH,&CH->SLOT[SLOT2]);
}
break;
case 0xc0:
/* FB,C */
if( (r&0x0f) > 8) return;
CH = &OPL->P_CH[r&0x0f];
CH->SLOT[SLOT1].FB = (v>>1)&7 ? ((v>>1)&7) + 7 : 0;
CH->SLOT[SLOT1].CON = v&1;
CH->SLOT[SLOT1].connect1 = CH->SLOT[SLOT1].CON ? &output : &phase_modulation;
break;
case 0xe0: /* waveform select */
/* simply ignore write to the waveform select register if selecting not enabled in test register */
if(OPL->wavesel)
{
slot = slot_array[r&0x1f];
if(slot < 0) return;
CH = &OPL->P_CH[slot/2];
CH->SLOT[slot&1].wavetable = (v&0x03)*SIN_LEN;
}
break;
}
}
static void OPLResetChip(FM_OPL *OPL)
{
int c,s;
int i;
OPL->eg_timer = 0;
OPL->eg_cnt = 0;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
OPL->noise_rng = 1; /* noise shift register */
OPL->mode = 0; /* normal mode */
Normalize line endings
2016-03-01 15:47:10 +00:00
OPL_STATUS_RESET(OPL,0x7f);
/* reset with register write */
- rewrote the OPL middle layer to remove the MusLib code. The new version keeps the non-MusLib code of both files and replaces most of the rest with code from Chocolate Doom.
2017-04-15 23:36:53 +00:00
WriteRegister(OPL,0x01,0); /* wavesel disable */
WriteRegister(OPL,0x02,0); /* Timer1 */
WriteRegister(OPL,0x03,0); /* Timer2 */
WriteRegister(OPL,0x04,0); /* IRQ mask clear */
for(i = 0xff ; i >= 0x20 ; i-- ) WriteRegister(OPL,i,0);
Normalize line endings
2016-03-01 15:47:10 +00:00
/* reset operator parameters */
for( c = 0 ; c < 9 ; c++ )
{
OPL_CH *CH = &OPL->P_CH[c];
for(s = 0 ; s < 2 ; s++ )
{
/* wave table */
CH->SLOT[s].wavetable = 0;
CH->SLOT[s].state = EG_OFF;
CH->SLOT[s].volume = MAX_ATT_INDEX;
}
}
}
class YM3812 : public OPLEmul
{
private:
FM_OPL Chip;
public:
/* Create one of virtual YM3812 */
YM3812(bool stereo)
{
init_tables();
/* clear */
memset(&Chip, 0, sizeof(Chip));
/* init global tables */
OPL_initalize(&Chip);
Chip.IsStereo = stereo;
Reset();
}
/* YM3812 I/O interface */
void WriteReg(int reg, int v)
{
- rewrote the OPL middle layer to remove the MusLib code. The new version keeps the non-MusLib code of both files and replaces most of the rest with code from Chocolate Doom.
2017-04-15 23:36:53 +00:00
WriteRegister(&Chip, reg & 0xff, v);
Normalize line endings
2016-03-01 15:47:10 +00:00
}
void Reset()
{
OPLResetChip(&Chip);
}
/* [RH] Full support for MIDI panning */
void SetPanning(int c, float left, float right)
{
Chip.P_CH[c].LeftVol = left;
Chip.P_CH[c].RightVol = right;
}
/*
** Generate samples for one of the YM3812's
**
** '*buffer' is the output buffer pointer
** 'length' is the number of samples that should be generated
*/
void Update(float *buffer, int length)
{
int i;
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint8_t rhythm = Chip.rhythm&0x20;
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t lfo_am_cnt_bak = Chip.lfo_am_cnt;
uint32_t eg_timer_bak = Chip.eg_timer;
uint32_t eg_cnt_bak = Chip.eg_cnt;
Normalize line endings
2016-03-01 15:47:10 +00:00
- did some cleanup on the OPL files to remove all use of homegrown integer types in favor of the standard ones. This already helps getting rid of one of the MUSLIB files still left.
2017-02-06 18:26:45 +00:00
uint32_t lfo_am_cnt_out = lfo_am_cnt_bak;
uint32_t eg_timer_out = eg_timer_bak;
uint32_t eg_cnt_out = eg_cnt_bak;
Normalize line endings
2016-03-01 15:47:10 +00:00
for (i = 0; i <= (rhythm ? 5 : 8); ++i)
{
Chip.lfo_am_cnt = lfo_am_cnt_bak;
Chip.eg_timer = eg_timer_bak;
Chip.eg_cnt = eg_cnt_bak;
if (CalcVoice (&Chip, i, buffer, length))
{
lfo_am_cnt_out = Chip.lfo_am_cnt;
eg_timer_out = Chip.eg_timer;
eg_cnt_out = Chip.eg_cnt;
}
}
Chip.lfo_am_cnt = lfo_am_cnt_out;
Chip.eg_timer = eg_timer_out;
Chip.eg_cnt = eg_cnt_out;
if (rhythm) /* Rhythm part */
{
Chip.lfo_am_cnt = lfo_am_cnt_bak;
Chip.eg_timer = eg_timer_bak;
Chip.eg_cnt = eg_cnt_bak;
CalcRhythm (&Chip, buffer, length);
}
}
- made the OPL synth backend a separate library.
2019-09-26 18:06:39 +00:00
std::string GetVoiceString(void *chip)
Normalize line endings
2016-03-01 15:47:10 +00:00
{
FM_OPL *OPL = (FM_OPL *)chip;
char out[9*3];
for (int i = 0; i <= 8; ++i)
{
int color;
if (OPL != NULL && (OPL->P_CH[i].SLOT[0].state != EG_OFF || OPL->P_CH[i].SLOT[1].state != EG_OFF))
{
color = 'D'; // Green means in use
}
else
{
color = 'A'; // Brick means free
}
out[i*3+0] = '\x1c';
out[i*3+1] = color;
out[i*3+2] = '*';
}
- made the OPL synth backend a separate library.
2019-09-26 18:06:39 +00:00
return std::string (out, 9*3);
Normalize line endings
2016-03-01 15:47:10 +00:00
}
};
OPLEmul *YM3812Create(bool stereo)
{
/* emulator create */
return new YM3812(stereo);
}
// [RH] Render a whole voice at once. If nothing else, it lets us avoid
// wasting a lot of time on voices that aren't playing anything.
static bool CalcVoice (FM_OPL *OPL, int voice, float *buffer, int length)
{
OPL_CH *const CH = &OPL->P_CH[voice];
int i;
if (CH->SLOT[0].state == EG_OFF && CH->SLOT[1].state == EG_OFF)
{ // Voice is not playing, so don't do anything for it
return false;
}
for (i = 0; i < length; ++i)
{
advance_lfo(OPL);
output = 0;
float sample = OPL_CALC_CH(CH);
if (!OPL->IsStereo)
{
buffer[i] += sample;
}
else
{
buffer[i*2] += sample * CH->LeftVol;
buffer[i*2+1] += sample * CH->RightVol;
}
advance(OPL, voice, voice);
}
return true;
}
static bool CalcRhythm (FM_OPL *OPL, float *buffer, int length)
{
int i;
for (i = 0; i < length; ++i)
{
advance_lfo(OPL);
output = 0;
OPL_CALC_RH(&OPL->P_CH[0], OPL->noise_rng & 1);
/* [RH] Convert to floating point. */
float sample = float(output) / 10240;
if (!OPL->IsStereo)
{
buffer[i] += sample;
}
else
{
// [RH] Always use center panning for rhythm.
// The MIDI player doesn't use the rhythm section anyway.
buffer[i*2] += sample * CENTER_PANNING_POWER;
buffer[i*2+1] += sample * CENTER_PANNING_POWER;
}
advance(OPL, 6, 8);
advance_noise(OPL);
}
return true;
}