2016-03-01 15:47:10 +00:00
/*
* * gameconfigfile . cpp
* * An . ini parser specifically for zdoom . ini
* *
* * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
* * Copyright 1998 - 2008 Randy Heit
* * All rights reserved .
* *
* * Redistribution and use in source and binary forms , with or without
* * modification , are permitted provided that the following conditions
* * are met :
* *
* * 1. Redistributions of source code must retain the above copyright
* * notice , this list of conditions and the following disclaimer .
* * 2. Redistributions in binary form must reproduce the above copyright
* * notice , this list of conditions and the following disclaimer in the
* * documentation and / or other materials provided with the distribution .
* * 3. The name of the author may not be used to endorse or promote products
* * derived from this software without specific prior written permission .
* *
* * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ` ` AS IS ' ' AND ANY EXPRESS OR
* * IMPLIED WARRANTIES , INCLUDING , BUT NOT LIMITED TO , THE IMPLIED WARRANTIES
* * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED .
* * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT , INDIRECT ,
* * INCIDENTAL , SPECIAL , EXEMPLARY , OR CONSEQUENTIAL DAMAGES ( INCLUDING , BUT
* * NOT LIMITED TO , PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES ; LOSS OF USE ,
* * DATA , OR PROFITS ; OR BUSINESS INTERRUPTION ) HOWEVER CAUSED AND ON ANY
* * THEORY OF LIABILITY , WHETHER IN CONTRACT , STRICT LIABILITY , OR TORT
* * ( INCLUDING NEGLIGENCE OR OTHERWISE ) ARISING IN ANY WAY OUT OF THE USE OFf
* * THIS SOFTWARE , EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE .
* * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
* *
*/
# include <stdio.h>
# include "gameconfigfile.h"
# include "c_cvars.h"
# include "c_dispatch.h"
# include "c_bind.h"
# include "m_argv.h"
# include "cmdlib.h"
# include "version.h"
# include "m_misc.h"
# include "v_font.h"
# include "a_pickups.h"
# include "doomstat.h"
# include "gi.h"
# include "d_main.h"
2019-02-01 08:37:05 +00:00
# if !defined _MSC_VER && !defined __APPLE__
# include "i_system.h" // for SHARE_DIR
# endif // !_MSC_VER && !__APPLE__
2016-03-01 15:47:10 +00:00
EXTERN_CVAR ( Bool , con_centernotify )
EXTERN_CVAR ( Int , msg0color )
EXTERN_CVAR ( Color , color )
EXTERN_CVAR ( Float , dimamount )
EXTERN_CVAR ( Int , msgmidcolor )
EXTERN_CVAR ( Int , msgmidcolor2 )
EXTERN_CVAR ( Bool , snd_pitched )
EXTERN_CVAR ( Color , am_wallcolor )
EXTERN_CVAR ( Color , am_fdwallcolor )
EXTERN_CVAR ( Color , am_cdwallcolor )
EXTERN_CVAR ( Bool , wi_percents )
2018-12-10 19:25:29 +00:00
EXTERN_CVAR ( Int , gl_texture_hqresizemode )
EXTERN_CVAR ( Int , gl_texture_hqresizemult )
2019-12-06 17:05:52 +00:00
EXTERN_CVAR ( Int , vid_preferbackend )
2016-03-01 15:47:10 +00:00
FGameConfigFile : : FGameConfigFile ( )
{
# ifdef __APPLE__
FString user_docs , user_app_support , local_app_support ;
2018-07-15 07:44:14 +00:00
M_GetMacSearchDirectories ( user_docs , user_app_support , local_app_support ) ;
2016-03-01 15:47:10 +00:00
# endif
2018-07-15 07:44:14 +00:00
2016-03-01 15:47:10 +00:00
FString pathname ;
2019-09-25 09:21:08 +00:00
OkayToWrite = false ; // Do not allow saving of the config before DoKeySetup()
2016-03-01 15:47:10 +00:00
bModSetup = false ;
pathname = GetConfigPath ( true ) ;
ChangePathName ( pathname ) ;
LoadConfigFile ( ) ;
// If zdoom.ini was read from the program directory, switch
// to the user directory now. If it was read from the user
// directory, this effectively does nothing.
pathname = GetConfigPath ( false ) ;
ChangePathName ( pathname ) ;
// Set default IWAD search paths if none present
if ( ! SetSection ( " IWADSearch.Directories " ) )
{
SetSection ( " IWADSearch.Directories " , true ) ;
SetValueForKey ( " Path " , " . " , true ) ;
SetValueForKey ( " Path " , " $DOOMWADDIR " , true ) ;
# ifdef __APPLE__
2018-03-04 09:06:11 +00:00
SetValueForKey ( " Path " , user_docs , true ) ;
SetValueForKey ( " Path " , user_app_support , true ) ;
2016-03-01 15:47:10 +00:00
SetValueForKey ( " Path " , " $PROGDIR " , true ) ;
2018-03-04 09:06:11 +00:00
SetValueForKey ( " Path " , local_app_support , true ) ;
2016-03-01 15:47:10 +00:00
# elif !defined(__unix__)
SetValueForKey ( " Path " , " $HOME " , true ) ;
SetValueForKey ( " Path " , " $PROGDIR " , true ) ;
# else
2017-12-10 16:27:36 +00:00
SetValueForKey ( " Path " , " $HOME/ " GAME_DIR , true ) ;
2016-03-01 15:47:10 +00:00
// Arch Linux likes them in /usr/share/doom
// Debian likes them in /usr/share/games/doom
// I assume other distributions don't do anything radically different
SetValueForKey ( " Path " , " /usr/local/share/doom " , true ) ;
SetValueForKey ( " Path " , " /usr/local/share/games/doom " , true ) ;
SetValueForKey ( " Path " , " /usr/share/doom " , true ) ;
SetValueForKey ( " Path " , " /usr/share/games/doom " , true ) ;
# endif
}
// Set default search paths if none present
if ( ! SetSection ( " FileSearch.Directories " ) )
{
SetSection ( " FileSearch.Directories " , true ) ;
# ifdef __APPLE__
SetValueForKey ( " Path " , user_docs , true ) ;
SetValueForKey ( " Path " , user_app_support , true ) ;
SetValueForKey ( " Path " , " $PROGDIR " , true ) ;
SetValueForKey ( " Path " , local_app_support , true ) ;
# elif !defined(__unix__)
SetValueForKey ( " Path " , " $PROGDIR " , true ) ;
# else
2017-12-10 16:27:36 +00:00
SetValueForKey ( " Path " , " $HOME/ " GAME_DIR , true ) ;
2018-02-24 15:50:13 +00:00
SetValueForKey ( " Path " , SHARE_DIR , true ) ;
2017-10-12 14:01:46 +00:00
SetValueForKey ( " Path " , " /usr/local/share/doom " , true ) ;
SetValueForKey ( " Path " , " /usr/local/share/games/doom " , true ) ;
SetValueForKey ( " Path " , " /usr/share/doom " , true ) ;
SetValueForKey ( " Path " , " /usr/share/games/doom " , true ) ;
2016-03-01 15:47:10 +00:00
# endif
SetValueForKey ( " Path " , " $DOOMWADDIR " , true ) ;
}
2018-02-25 08:32:05 +00:00
// Set default search paths if none present
if ( ! SetSection ( " SoundfontSearch.Directories " ) )
{
SetSection ( " SoundfontSearch.Directories " , true ) ;
# ifdef __APPLE__
SetValueForKey ( " Path " , user_docs + " /soundfonts " , true ) ;
Upgrade libADLMIDI and libOPNMIDI
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey ( " Path " , user_docs + " /fm_banks " , true ) ;
2018-02-25 08:32:05 +00:00
SetValueForKey ( " Path " , user_app_support + " /soundfonts " , true ) ;
Upgrade libADLMIDI and libOPNMIDI
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey ( " Path " , user_app_support + " /fm_banks " , true ) ;
2018-02-25 08:32:05 +00:00
SetValueForKey ( " Path " , " $PROGDIR/soundfonts " , true ) ;
Upgrade libADLMIDI and libOPNMIDI
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey ( " Path " , " $PROGDIR/fm_banks " , true ) ;
2018-02-25 08:32:05 +00:00
SetValueForKey ( " Path " , local_app_support + " /soundfonts " , true ) ;
Upgrade libADLMIDI and libOPNMIDI
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey ( " Path " , local_app_support + " /fm_banks " , true ) ;
2018-02-25 08:32:05 +00:00
# elif !defined(__unix__)
SetValueForKey ( " Path " , " $PROGDIR/soundfonts " , true ) ;
Upgrade libADLMIDI and libOPNMIDI
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey ( " Path " , " $PROGDIR/fm_banks " , true ) ;
2018-02-25 08:32:05 +00:00
# else
SetValueForKey ( " Path " , " $HOME/ " GAME_DIR " /soundfonts " , true ) ;
Upgrade libADLMIDI and libOPNMIDI
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey ( " Path " , " $HOME/ " GAME_DIR " /fm_banks " , true ) ;
2018-02-25 08:32:05 +00:00
SetValueForKey ( " Path " , " /usr/local/share/doom/soundfonts " , true ) ;
Upgrade libADLMIDI and libOPNMIDI
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey ( " Path " , " /usr/local/share/doom/fm_banks " , true ) ;
2018-02-25 08:32:05 +00:00
SetValueForKey ( " Path " , " /usr/local/share/games/doom/soundfonts " , true ) ;
Upgrade libADLMIDI and libOPNMIDI
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey ( " Path " , " /usr/local/share/games/doom/fm_banks " , true ) ;
2018-02-25 08:32:05 +00:00
SetValueForKey ( " Path " , " /usr/share/doom/soundfonts " , true ) ;
Upgrade libADLMIDI and libOPNMIDI
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey ( " Path " , " /usr/share/doom/fm_banks " , true ) ;
2018-02-25 08:32:05 +00:00
SetValueForKey ( " Path " , " /usr/share/games/doom/soundfonts " , true ) ;
Upgrade libADLMIDI and libOPNMIDI
Added full-panning stereo, improvement of channel management, and many other things.
Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes.
To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback.
ADLMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Fixed correctness of CMF files playing
* Fixed unnecessary overuse of chip channels by blank notes
* Added API to disable specific MIDI tracks or play one of MIDI tracks solo
* Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits.
* Added working implementation of TMB's velocity offset
* Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!)
* Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip
OPNMIDI 1.4.0 2018-10-01
* Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!)
* Added support for GS way of custom drum channels (through SysEx events)
* Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call)
* Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes)
* Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played)
* Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels
* Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis
* Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip
* Added support for full-panning stereo option
ADL&OPN Hotfix: re-calculated default banks
The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time.
2018-10-01 21:07:05 +00:00
SetValueForKey ( " Path " , " /usr/share/games/doom/fm_banks " , true ) ;
2018-02-25 08:32:05 +00:00
# endif
}
2016-03-01 15:47:10 +00:00
// Add some self-documentation.
SetSectionNote ( " IWADSearch.Directories " ,
" # These are the directories to automatically search for IWADs. \n "
" # Each directory should be on a separate line, preceded by Path= \n " ) ;
SetSectionNote ( " FileSearch.Directories " ,
" # These are the directories to search for wads added with the -file \n "
" # command line parameter, if they cannot be found with the path \n "
" # as-is. Layout is the same as for IWADSearch.Directories \n " ) ;
2018-02-25 08:32:05 +00:00
SetSectionNote ( " SoundfontSearch.Directories " ,
" # These are the directories to search for soundfonts that let listed in the menu. \n "
" # Layout is the same as for IWADSearch.Directories \n " ) ;
2016-03-01 15:47:10 +00:00
}
FGameConfigFile : : ~ FGameConfigFile ( )
{
}
2018-08-30 21:39:11 +00:00
void FGameConfigFile : : WriteCommentHeader ( FileWriter * file ) const
2016-03-01 15:47:10 +00:00
{
2018-08-30 21:39:11 +00:00
file - > Printf ( " # This file was generated by " GAMENAME " %s on %s \n " , GetVersionString ( ) , myasctime ( ) ) ;
2016-03-01 15:47:10 +00:00
}
void FGameConfigFile : : DoAutoloadSetup ( FIWadManager * iwad_man )
{
// Create auto-load sections, so users know what's available.
// Note that this totem pole is the reverse of the order that
// they will appear in the file.
double last = 0 ;
if ( SetSection ( " LastRun " ) )
{
const char * lastver = GetValueForKey ( " Version " ) ;
if ( lastver ! = NULL ) last = atof ( lastver ) ;
}
if ( last < 211 )
{
RenameSection ( " Chex3.Autoload " , " chex.chex3.Autoload " ) ;
RenameSection ( " Chex1.Autoload " , " chex.chex1.Autoload " ) ;
RenameSection ( " HexenDK.Autoload " , " hexen.deathkings.Autoload " ) ;
RenameSection ( " HereticSR.Autoload " , " heretic.shadow.Autoload " ) ;
RenameSection ( " FreeDM.Autoload " , " doom.freedoom.freedm.Autoload " ) ;
RenameSection ( " Freedoom2.Autoload " , " doom.freedoom.phase2.Autoload " ) ;
RenameSection ( " Freedoom1.Autoload " , " doom.freedoom.phase1.Autoload " ) ;
RenameSection ( " Freedoom.Autoload " , " doom.freedoom.Autoload " ) ;
2019-04-09 22:15:16 +00:00
RenameSection ( " DoomBFG.Autoload " , " doom.id.doom1.bfg.Autoload " ) ;
RenameSection ( " DoomU.Autoload " , " doom.id.doom1.ultimate.Autoload " ) ;
RenameSection ( " Doom1.Autoload " , " doom.id.doom1.registered.Autoload " ) ;
RenameSection ( " TNT.Autoload " , " doom.id.doom2.tnt.Autoload " ) ;
RenameSection ( " Plutonia.Autoload " , " doom.id.doom2.plutonia.Autoload " ) ;
RenameSection ( " Doom2BFG.Autoload " , " doom.id.doom2.bfg.Autoload " ) ;
RenameSection ( " Doom2.Autoload " , " doom.id.doom2.commercial.Autoload " ) ;
}
else if ( last < 218 )
{
RenameSection ( " doom.doom1.bfg.Autoload " , " doom.id.doom1.bfg.Autoload " ) ;
RenameSection ( " doom.doom1.ultimate.Autoload " , " doom.id.doom1.ultimate.Autoload " ) ;
RenameSection ( " doom.doom1.registered.Autoload " , " doom.id.doom1.registered.Autoload " ) ;
RenameSection ( " doom.doom2.tnt.Autoload " , " doom.id.doom2.tnt.Autoload " ) ;
RenameSection ( " doom.doom2.plutonia.Autoload " , " doom.id.doom2.plutonia.Autoload " ) ;
RenameSection ( " doom.doom2.bfg.Autoload " , " doom.id.doom2.bfg.Autoload " ) ;
RenameSection ( " doom.doom2.commercial.Autoload " , " doom.id.doom2.commercial.Autoload " ) ;
2016-03-01 15:47:10 +00:00
}
const FString * pAuto ;
for ( int num = 0 ; ( pAuto = iwad_man - > GetAutoname ( num ) ) ! = NULL ; num + + )
{
if ( ! ( iwad_man - > GetIWadFlags ( num ) & GI_SHAREWARE ) ) // we do not want autoload sections for shareware IWADs (which may have an autoname for resource filtering)
{
FString workname = * pAuto ;
while ( workname . IsNotEmpty ( ) )
{
FString section = workname + " .Autoload " ;
CreateSectionAtStart ( section . GetChars ( ) ) ;
long dotpos = workname . LastIndexOf ( ' . ' ) ;
if ( dotpos < 0 ) break ;
workname . Truncate ( dotpos ) ;
}
}
}
CreateSectionAtStart ( " Global.Autoload " ) ;
// The same goes for auto-exec files.
CreateStandardAutoExec ( " Chex.AutoExec " , true ) ;
CreateStandardAutoExec ( " Strife.AutoExec " , true ) ;
CreateStandardAutoExec ( " Hexen.AutoExec " , true ) ;
CreateStandardAutoExec ( " Heretic.AutoExec " , true ) ;
CreateStandardAutoExec ( " Doom.AutoExec " , true ) ;
// Move search paths back to the top.
2018-02-25 08:32:05 +00:00
MoveSectionToStart ( " SoundfontSearch.Directories " ) ;
2016-03-01 15:47:10 +00:00
MoveSectionToStart ( " FileSearch.Directories " ) ;
MoveSectionToStart ( " IWADSearch.Directories " ) ;
SetSectionNote ( " Doom.AutoExec " ,
" # Files to automatically execute when running the corresponding game. \n "
" # Each file should be on its own line, preceded by Path= \n \n " ) ;
SetSectionNote ( " Global.Autoload " ,
" # WAD files to always load. These are loaded after the IWAD but before \n "
" # any files added with -file. Place each file on its own line, preceded \n "
" # by Path= \n " ) ;
SetSectionNote ( " Doom.Autoload " ,
" # Wad files to automatically load depending on the game and IWAD you are \n "
" # playing. You may have have files that are loaded for all similar IWADs \n "
" # (the game) and files that are only loaded for particular IWADs. For example, \n "
" # any files listed under 'doom.Autoload' will be loaded for any version of Doom, \n "
" # but files listed under 'doom.doom2.Autoload' will only load when you are \n "
" # playing a Doom 2 based game (doom2.wad, tnt.wad or plutonia.wad), and files listed under \n "
" # 'doom.doom2.commercial.Autoload' only when playing doom2.wad. \n \n " ) ;
}
void FGameConfigFile : : DoGlobalSetup ( )
{
if ( SetSection ( " GlobalSettings.Unknown " ) )
{
ReadCVars ( CVAR_GLOBALCONFIG ) ;
}
if ( SetSection ( " GlobalSettings " ) )
{
ReadCVars ( CVAR_GLOBALCONFIG ) ;
}
if ( SetSection ( " LastRun " ) )
{
const char * lastver = GetValueForKey ( " Version " ) ;
if ( lastver ! = NULL )
{
double last = atof ( lastver ) ;
if ( last < 123.1 )
{
FBaseCVar * noblitter = FindCVar ( " vid_noblitter " , NULL ) ;
if ( noblitter ! = NULL )
{
noblitter - > ResetToDefault ( ) ;
}
}
if ( last < 202 )
{
// Make sure the Hexen hotkeys are accessible by default.
if ( SetSection ( " Hexen.Bindings " ) )
{
SetValueForKey ( " \\ " , " use ArtiHealth " ) ;
SetValueForKey ( " scroll " , " +showscores " ) ;
SetValueForKey ( " 0 " , " useflechette " ) ;
SetValueForKey ( " 9 " , " use ArtiBlastRadius " ) ;
SetValueForKey ( " 8 " , " use ArtiTeleport " ) ;
SetValueForKey ( " 7 " , " use ArtiTeleportOther " ) ;
SetValueForKey ( " 6 " , " use ArtiPork " ) ;
SetValueForKey ( " 5 " , " use ArtiInvulnerability2 " ) ;
}
}
if ( last < 204 )
{ // The old default for vsync was true, but with an unlimited framerate
// now, false is a better default.
FBaseCVar * vsync = FindCVar ( " vid_vsync " , NULL ) ;
if ( vsync ! = NULL )
{
vsync - > ResetToDefault ( ) ;
}
}
2019-09-28 18:33:25 +00:00
/* spc_amp no longer exists
2016-03-01 15:47:10 +00:00
if ( last < 206 )
{ // spc_amp is now a float, not an int.
if ( spc_amp > 16 )
{
spc_amp = spc_amp / 16.f ;
}
}
2019-09-28 18:33:25 +00:00
*/
2016-03-01 15:47:10 +00:00
if ( last < 207 )
{ // Now that snd_midiprecache works again, you probably don't want it on.
FBaseCVar * precache = FindCVar ( " snd_midiprecache " , NULL ) ;
if ( precache ! = NULL )
{
precache - > ResetToDefault ( ) ;
}
}
if ( last < 208 )
{ // Weapon sections are no longer used, so tidy up the config by deleting them.
const char * name ;
size_t namelen ;
bool more ;
more = SetFirstSection ( ) ;
while ( more )
{
name = GetCurrentSection ( ) ;
if ( name ! = NULL & &
( namelen = strlen ( name ) ) > 12 & &
strcmp ( name + namelen - 12 , " .WeaponSlots " ) = = 0 )
{
more = DeleteCurrentSection ( ) ;
}
else
{
more = SetNextSection ( ) ;
}
}
}
if ( last < 209 )
{
// menu dimming is now a gameinfo option so switch user override off
FBaseCVar * dim = FindCVar ( " dimamount " , NULL ) ;
if ( dim ! = NULL )
{
dim - > ResetToDefault ( ) ;
}
}
if ( last < 210 )
{
if ( SetSection ( " Hexen.Bindings " ) )
{
// These 2 were misnamed in earlier versions
SetValueForKey ( " 6 " , " use ArtiPork " ) ;
SetValueForKey ( " 5 " , " use ArtiInvulnerability2 " ) ;
}
}
2017-03-28 20:51:37 +00:00
if ( last < 213 )
2017-03-25 17:31:53 +00:00
{
2017-03-30 00:16:23 +00:00
auto var = FindCVar ( " snd_channels " , NULL ) ;
2017-03-25 17:31:53 +00:00
if ( var ! = NULL )
{
// old settings were default 32, minimum 8, new settings are default 128, minimum 64.
UCVarValue v = var - > GetGenericRep ( CVAR_Int ) ;
if ( v . Int < 64 ) var - > ResetToDefault ( ) ;
}
}
2017-03-30 00:16:23 +00:00
if ( last < 214 )
{
FBaseCVar * var = FindCVar ( " hud_scale " , NULL ) ;
if ( var ! = NULL ) var - > ResetToDefault ( ) ;
var = FindCVar ( " st_scale " , NULL ) ;
if ( var ! = NULL ) var - > ResetToDefault ( ) ;
var = FindCVar ( " hud_althudscale " , NULL ) ;
if ( var ! = NULL ) var - > ResetToDefault ( ) ;
var = FindCVar ( " con_scale " , NULL ) ;
if ( var ! = NULL ) var - > ResetToDefault ( ) ;
var = FindCVar ( " con_scaletext " , NULL ) ;
if ( var ! = NULL ) var - > ResetToDefault ( ) ;
2017-03-30 09:30:09 +00:00
var = FindCVar ( " uiscale " , NULL ) ;
if ( var ! = NULL ) var - > ResetToDefault ( ) ;
2017-03-30 00:16:23 +00:00
}
2017-04-30 19:01:38 +00:00
if ( last < 215 )
{
// Previously a true/false boolean. Now an on/off/auto tri-state with auto as the default.
FBaseCVar * var = FindCVar ( " snd_hrtf " , NULL ) ;
if ( var ! = NULL ) var - > ResetToDefault ( ) ;
}
2018-12-10 19:25:29 +00:00
if ( last < 216 )
{
FBaseCVar * var = FindCVar ( " gl_texture_hqresize " , NULL ) ;
if ( var ! = NULL )
{
auto v = var - > GetGenericRep ( CVAR_Int ) ;
switch ( v . Int )
{
case 1 :
gl_texture_hqresizemode = 1 ; gl_texture_hqresizemult = 2 ;
break ;
case 2 :
gl_texture_hqresizemode = 1 ; gl_texture_hqresizemult = 3 ;
break ;
case 3 :
gl_texture_hqresizemode = 1 ; gl_texture_hqresizemult = 4 ;
break ;
case 4 :
gl_texture_hqresizemode = 2 ; gl_texture_hqresizemult = 2 ;
break ;
case 5 :
gl_texture_hqresizemode = 2 ; gl_texture_hqresizemult = 3 ;
break ;
case 6 :
gl_texture_hqresizemode = 2 ; gl_texture_hqresizemult = 4 ;
break ;
case 7 :
gl_texture_hqresizemode = 3 ; gl_texture_hqresizemult = 2 ;
break ;
case 8 :
gl_texture_hqresizemode = 3 ; gl_texture_hqresizemult = 3 ;
break ;
case 9 :
gl_texture_hqresizemode = 3 ; gl_texture_hqresizemult = 4 ;
break ;
case 10 :
gl_texture_hqresizemode = 4 ; gl_texture_hqresizemult = 2 ;
break ;
case 11 :
gl_texture_hqresizemode = 4 ; gl_texture_hqresizemult = 3 ;
break ;
case 12 :
gl_texture_hqresizemode = 4 ; gl_texture_hqresizemult = 4 ;
break ;
case 18 :
gl_texture_hqresizemode = 4 ; gl_texture_hqresizemult = 5 ;
break ;
case 19 :
gl_texture_hqresizemode = 4 ; gl_texture_hqresizemult = 6 ;
break ;
case 13 :
gl_texture_hqresizemode = 5 ; gl_texture_hqresizemult = 2 ;
break ;
case 14 :
gl_texture_hqresizemode = 5 ; gl_texture_hqresizemult = 3 ;
break ;
case 15 :
gl_texture_hqresizemode = 5 ; gl_texture_hqresizemult = 4 ;
break ;
case 16 :
gl_texture_hqresizemode = 5 ; gl_texture_hqresizemult = 5 ;
break ;
case 17 :
gl_texture_hqresizemode = 5 ; gl_texture_hqresizemult = 6 ;
break ;
case 20 :
gl_texture_hqresizemode = 6 ; gl_texture_hqresizemult = 2 ;
break ;
case 21 :
gl_texture_hqresizemode = 6 ; gl_texture_hqresizemult = 3 ;
break ;
case 22 :
gl_texture_hqresizemode = 6 ; gl_texture_hqresizemult = 4 ;
break ;
case 23 :
gl_texture_hqresizemode = 6 ; gl_texture_hqresizemult = 5 ;
break ;
case 24 :
gl_texture_hqresizemode = 6 ; gl_texture_hqresizemult = 6 ;
break ;
case 0 :
default :
gl_texture_hqresizemode = 0 ; gl_texture_hqresizemult = 1 ;
break ;
}
}
}
2019-03-31 07:38:15 +00:00
if ( last < 217 )
{
auto var = FindCVar ( " vid_scalemode " , NULL ) ;
UCVarValue newvalue ;
if ( var ! = NULL )
{
UCVarValue v = var - > GetGenericRep ( CVAR_Int ) ;
2019-12-24 04:14:08 +00:00
if ( v . Int = = 3 ) // 640x400
{
newvalue . Int = 2 ;
var - > SetGenericRep ( newvalue , CVAR_Int ) ;
}
if ( v . Int = = 2 ) // 320x200
{
newvalue . Int = 7 ;
var - > SetGenericRep ( newvalue , CVAR_Int ) ;
}
2019-03-31 07:38:15 +00:00
}
}
2019-12-06 17:05:52 +00:00
if ( last < 219 )
{
// migrate vid_enablevulkan to vid_preferbackend
auto var = FindCVar ( " vid_enablevulkan " , NULL ) ;
if ( var ! = NULL )
{
UCVarValue v = var - > GetGenericRep ( CVAR_Int ) ;
vid_preferbackend = v . Int ;
}
}
2016-03-01 15:47:10 +00:00
}
}
}
void FGameConfigFile : : DoGameSetup ( const char * gamename )
{
const char * key ;
const char * value ;
sublen = countof ( section ) - 1 - mysnprintf ( section , countof ( section ) , " %s. " , gamename ) ;
subsection = section + countof ( section ) - sublen - 1 ;
section [ countof ( section ) - 1 ] = ' \0 ' ;
strncpy ( subsection , " UnknownConsoleVariables " , sublen ) ;
if ( SetSection ( section ) )
{
ReadCVars ( 0 ) ;
}
strncpy ( subsection , " ConsoleVariables " , sublen ) ;
if ( SetSection ( section ) )
{
ReadCVars ( 0 ) ;
}
if ( gameinfo . gametype & GAME_Raven )
{
SetRavenDefaults ( gameinfo . gametype = = GAME_Hexen ) ;
}
// The NetServerInfo section will be read and override anything loaded
// here when it's determined that a netgame is being played.
strncpy ( subsection , " LocalServerInfo " , sublen ) ;
if ( SetSection ( section ) )
{
ReadCVars ( 0 ) ;
}
strncpy ( subsection , " Player " , sublen ) ;
if ( SetSection ( section ) )
{
ReadCVars ( 0 ) ;
}
strncpy ( subsection , " ConsoleAliases " , sublen ) ;
if ( SetSection ( section ) )
{
const char * name = NULL ;
while ( NextInSection ( key , value ) )
{
if ( stricmp ( key , " Name " ) = = 0 )
{
name = value ;
}
else if ( stricmp ( key , " Command " ) = = 0 & & name ! = NULL )
{
C_SetAlias ( name , value ) ;
name = NULL ;
}
}
}
}
// Moved from DoGameSetup so that it can happen after wads are loaded
void FGameConfigFile : : DoKeySetup ( const char * gamename )
{
static const struct { const char * label ; FKeyBindings * bindings ; } binders [ ] =
{
{ " Bindings " , & Bindings } ,
{ " DoubleBindings " , & DoubleBindings } ,
{ " AutomapBindings " , & AutomapBindings } ,
{ NULL , NULL }
} ;
const char * key , * value ;
sublen = countof ( section ) - 1 - mysnprintf ( section , countof ( section ) , " %s. " , gamename ) ;
subsection = section + countof ( section ) - sublen - 1 ;
section [ countof ( section ) - 1 ] = ' \0 ' ;
C_SetDefaultBindings ( ) ;
for ( int i = 0 ; binders [ i ] . label ! = NULL ; + + i )
{
strncpy ( subsection , binders [ i ] . label , sublen ) ;
if ( SetSection ( section ) )
{
FKeyBindings * bindings = binders [ i ] . bindings ;
bindings - > UnbindAll ( ) ;
while ( NextInSection ( key , value ) )
{
bindings - > DoBind ( key , value ) ;
}
}
}
2019-09-25 09:21:08 +00:00
OkayToWrite = true ;
2016-03-01 15:47:10 +00:00
}
// Like DoGameSetup(), but for mod-specific cvars.
// Called after CVARINFO has been parsed.
void FGameConfigFile : : DoModSetup ( const char * gamename )
{
mysnprintf ( section , countof ( section ) , " %s.Player.Mod " , gamename ) ;
if ( SetSection ( section ) )
{
ReadCVars ( CVAR_MOD | CVAR_USERINFO | CVAR_IGNORE ) ;
}
mysnprintf ( section , countof ( section ) , " %s.LocalServerInfo.Mod " , gamename ) ;
if ( SetSection ( section ) )
{
ReadCVars ( CVAR_MOD | CVAR_SERVERINFO | CVAR_IGNORE ) ;
}
// Signal that these sections should be rewritten when saving the config.
bModSetup = true ;
}
void FGameConfigFile : : ReadNetVars ( )
{
strncpy ( subsection , " NetServerInfo " , sublen ) ;
if ( SetSection ( section ) )
{
ReadCVars ( 0 ) ;
}
if ( bModSetup )
{
mysnprintf ( subsection , sublen , " NetServerInfo.Mod " ) ;
if ( SetSection ( section ) )
{
ReadCVars ( CVAR_MOD | CVAR_SERVERINFO | CVAR_IGNORE ) ;
}
}
}
// Read cvars from a cvar section of the ini. Flags are the flags to give
// to newly-created cvars that were not already defined.
2017-03-08 17:47:52 +00:00
void FGameConfigFile : : ReadCVars ( uint32_t flags )
2016-03-01 15:47:10 +00:00
{
const char * key , * value ;
FBaseCVar * cvar ;
UCVarValue val ;
flags | = CVAR_ARCHIVE | CVAR_UNSETTABLE | CVAR_AUTO ;
while ( NextInSection ( key , value ) )
{
cvar = FindCVar ( key , NULL ) ;
if ( cvar = = NULL )
{
cvar = new FStringCVar ( key , NULL , flags ) ;
}
val . String = const_cast < char * > ( value ) ;
cvar - > SetGenericRep ( val , CVAR_String ) ;
}
}
void FGameConfigFile : : ArchiveGameData ( const char * gamename )
{
char section [ 32 * 3 ] , * subsection ;
sublen = countof ( section ) - 1 - mysnprintf ( section , countof ( section ) , " %s. " , gamename ) ;
subsection = section + countof ( section ) - 1 - sublen ;
strncpy ( subsection , " Player " , sublen ) ;
SetSection ( section , true ) ;
ClearCurrentSection ( ) ;
C_ArchiveCVars ( this , CVAR_ARCHIVE | CVAR_USERINFO ) ;
if ( bModSetup )
{
strncpy ( subsection + 6 , " .Mod " , sublen - 6 ) ;
SetSection ( section , true ) ;
ClearCurrentSection ( ) ;
C_ArchiveCVars ( this , CVAR_MOD | CVAR_ARCHIVE | CVAR_AUTO | CVAR_USERINFO ) ;
}
strncpy ( subsection , " ConsoleVariables " , sublen ) ;
SetSection ( section , true ) ;
ClearCurrentSection ( ) ;
C_ArchiveCVars ( this , CVAR_ARCHIVE ) ;
// Do not overwrite the serverinfo section if playing a netgame, and
// this machine was not the initial host.
if ( ! netgame | | consoleplayer = = 0 )
{
strncpy ( subsection , netgame ? " NetServerInfo " : " LocalServerInfo " , sublen ) ;
SetSection ( section , true ) ;
ClearCurrentSection ( ) ;
C_ArchiveCVars ( this , CVAR_ARCHIVE | CVAR_SERVERINFO ) ;
if ( bModSetup )
{
strncpy ( subsection , netgame ? " NetServerInfo.Mod " : " LocalServerInfo.Mod " , sublen ) ;
SetSection ( section , true ) ;
ClearCurrentSection ( ) ;
C_ArchiveCVars ( this , CVAR_MOD | CVAR_ARCHIVE | CVAR_AUTO | CVAR_SERVERINFO ) ;
}
}
strncpy ( subsection , " UnknownConsoleVariables " , sublen ) ;
SetSection ( section , true ) ;
ClearCurrentSection ( ) ;
C_ArchiveCVars ( this , CVAR_ARCHIVE | CVAR_AUTO ) ;
strncpy ( subsection , " ConsoleAliases " , sublen ) ;
SetSection ( section , true ) ;
ClearCurrentSection ( ) ;
C_ArchiveAliases ( this ) ;
M_SaveCustomKeys ( this , section , subsection , sublen ) ;
strcpy ( subsection , " Bindings " ) ;
SetSection ( section , true ) ;
Bindings . ArchiveBindings ( this ) ;
strncpy ( subsection , " DoubleBindings " , sublen ) ;
SetSection ( section , true ) ;
DoubleBindings . ArchiveBindings ( this ) ;
strncpy ( subsection , " AutomapBindings " , sublen ) ;
SetSection ( section , true ) ;
AutomapBindings . ArchiveBindings ( this ) ;
}
void FGameConfigFile : : ArchiveGlobalData ( )
{
SetSection ( " LastRun " , true ) ;
ClearCurrentSection ( ) ;
SetValueForKey ( " Version " , LASTRUNVERSION ) ;
SetSection ( " GlobalSettings " , true ) ;
ClearCurrentSection ( ) ;
C_ArchiveCVars ( this , CVAR_ARCHIVE | CVAR_GLOBALCONFIG ) ;
SetSection ( " GlobalSettings.Unknown " , true ) ;
ClearCurrentSection ( ) ;
C_ArchiveCVars ( this , CVAR_ARCHIVE | CVAR_GLOBALCONFIG | CVAR_AUTO ) ;
}
FString FGameConfigFile : : GetConfigPath ( bool tryProg )
{
const char * pathval ;
pathval = Args - > CheckValue ( " -config " ) ;
if ( pathval ! = NULL )
{
return FString ( pathval ) ;
}
return M_GetConfigPath ( tryProg ) ;
}
void FGameConfigFile : : CreateStandardAutoExec ( const char * section , bool start )
{
if ( ! SetSection ( section ) )
{
FString path = M_GetAutoexecPath ( ) ;
SetSection ( section , true ) ;
SetValueForKey ( " Path " , path . GetChars ( ) ) ;
}
if ( start )
{
MoveSectionToStart ( section ) ;
}
}
2017-04-14 11:31:58 +00:00
void FGameConfigFile : : AddAutoexec ( FArgs * list , const char * game )
2016-03-01 15:47:10 +00:00
{
char section [ 64 ] ;
const char * key ;
const char * value ;
mysnprintf ( section , countof ( section ) , " %s.AutoExec " , game ) ;
// If <game>.AutoExec section does not exist, create it
// with a default autoexec.cfg file present.
CreateStandardAutoExec ( section , false ) ;
// Run any files listed in the <game>.AutoExec section
if ( ! SectionIsEmpty ( ) )
{
while ( NextInSection ( key , value ) )
{
if ( stricmp ( key , " Path " ) = = 0 & & * value ! = ' \0 ' )
{
FString expanded_path = ExpandEnvVars ( value ) ;
if ( FileExists ( expanded_path ) )
{
list - > AppendArg ( ExpandEnvVars ( value ) ) ;
}
}
}
}
}
void FGameConfigFile : : SetRavenDefaults ( bool isHexen )
{
UCVarValue val ;
val . Bool = false ;
wi_percents . SetGenericRepDefault ( val , CVAR_Bool ) ;
val . Bool = true ;
con_centernotify . SetGenericRepDefault ( val , CVAR_Bool ) ;
snd_pitched . SetGenericRepDefault ( val , CVAR_Bool ) ;
val . Int = 9 ;
msg0color . SetGenericRepDefault ( val , CVAR_Int ) ;
val . Int = CR_WHITE ;
msgmidcolor . SetGenericRepDefault ( val , CVAR_Int ) ;
val . Int = CR_YELLOW ;
msgmidcolor2 . SetGenericRepDefault ( val , CVAR_Int ) ;
val . Int = 0x543b17 ;
am_wallcolor . SetGenericRepDefault ( val , CVAR_Int ) ;
val . Int = 0xd0b085 ;
am_fdwallcolor . SetGenericRepDefault ( val , CVAR_Int ) ;
val . Int = 0x734323 ;
am_cdwallcolor . SetGenericRepDefault ( val , CVAR_Int ) ;
// Fix the Heretic/Hexen automap colors so they are correct.
// (They were wrong on older versions.)
if ( * am_wallcolor = = 0x2c1808 & & * am_fdwallcolor = = 0x887058 & & * am_cdwallcolor = = 0x4c3820 )
{
am_wallcolor . ResetToDefault ( ) ;
am_fdwallcolor . ResetToDefault ( ) ;
am_cdwallcolor . ResetToDefault ( ) ;
}
if ( ! isHexen )
{
val . Int = 0x3f6040 ;
color . SetGenericRepDefault ( val , CVAR_Int ) ;
}
}
CCMD ( whereisini )
{
FString path = M_GetConfigPath ( false ) ;
Printf ( " %s \n " , path . GetChars ( ) ) ;
}