qzdoom-gpl/src/sound/fmodsound.cpp

2618 lines
74 KiB
C++
Raw Normal View History

/*
** i_sound.cpp
** System interface for sound; uses fmod.dll
**
**---------------------------------------------------------------------------
** Copyright 1998-2008 Randy Heit
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
**
*/
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// HEADER FILES ------------------------------------------------------------
#ifdef _WIN32
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#include <mmsystem.h>
#include "resource.h"
extern HWND Window;
#define USE_WINDOWS_DWORD
#else
#define FALSE 0
#define TRUE 1
#endif
#include "templates.h"
#include "fmodsound.h"
#include "c_cvars.h"
#include "i_system.h"
#include "gi.h"
#include "actor.h"
#include "r_state.h"
#include "w_wad.h"
#include "i_music.h"
#include "i_musicinterns.h"
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
#include "v_text.h"
#include "p_local.h"
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// MACROS ------------------------------------------------------------------
// killough 2/21/98: optionally use varying pitched sounds
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
#define PITCH(freq,pitch) (snd_pitched ? ((freq)*(pitch))/128.f : float(freq))
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Just some extra for music and whatever
#define NUM_EXTRA_SOFTWARE_CHANNELS 1
#define MAX_CHANNELS 256
#define SPECTRUM_SIZE 256
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// TYPES -------------------------------------------------------------------
struct FEnumList
{
const char *Name;
int Value;
};
// EXTERNAL FUNCTION PROTOTYPES --------------------------------------------
FMOD_RESULT SPC_CreateCodec(FMOD::System *sys);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// PUBLIC FUNCTION PROTOTYPES ----------------------------------------------
// PRIVATE FUNCTION PROTOTYPES ---------------------------------------------
static int Enum_NumForName(const FEnumList *list, const char *name);
static const char *Enum_NameForNum(const FEnumList *list, int num);
// EXTERNAL DATA DECLARATIONS ----------------------------------------------
EXTERN_CVAR (String, snd_output)
EXTERN_CVAR (Float, snd_musicvolume)
EXTERN_CVAR (Int, snd_buffersize)
EXTERN_CVAR (Int, snd_samplerate)
EXTERN_CVAR (Bool, snd_pitched)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
EXTERN_CVAR (Int, snd_channels)
// PUBLIC DATA DEFINITIONS -------------------------------------------------
ReverbContainer *ForcedEnvironment;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
CVAR (Int, snd_driver, 0, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
CVAR (Int, snd_buffercount, 0, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (Bool, snd_hrtf, false, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
CVAR (Bool, snd_waterreverb, true, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (String, snd_resampler, "Linear", CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (String, snd_speakermode, "Auto", CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (String, snd_output_format, "PCM-16", CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
CVAR (String, snd_midipatchset, "", CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (Bool, snd_profile, false, 0)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Underwater low-pass filter cutoff frequency. Set to 0 to disable the filter.
CUSTOM_CVAR (Float, snd_waterlp, 250, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
{
// Clamp to the DSP unit's limits.
if (*self < 10 && *self != 0)
{
self = 10;
}
else if (*self > 22000)
{
self = 22000;
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// PRIVATE DATA DEFINITIONS ------------------------------------------------
static const ReverbContainer *PrevEnvironment;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
static bool ShowedBanner;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// The rolloff callback is called during FMOD::Sound::play, so we need this
// global variable to contain the sound info during that time for the
// callback.
static sfxinfo_t *GSfxInfo;
static float GDistScale;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// In the below lists, duplicate entries are for user selection. When
// queried, only the first one for the particular value is shown.
static const FEnumList OutputNames[] =
{
{ "Auto", FMOD_OUTPUTTYPE_AUTODETECT },
{ "Default", FMOD_OUTPUTTYPE_AUTODETECT },
{ "No sound", FMOD_OUTPUTTYPE_NOSOUND },
// Windows
{ "DirectSound", FMOD_OUTPUTTYPE_DSOUND },
{ "DSound", FMOD_OUTPUTTYPE_DSOUND },
{ "Windows Multimedia", FMOD_OUTPUTTYPE_WINMM },
{ "WinMM", FMOD_OUTPUTTYPE_WINMM },
{ "WaveOut", FMOD_OUTPUTTYPE_WINMM },
{ "OpenAL", FMOD_OUTPUTTYPE_OPENAL },
{ "WASAPI", FMOD_OUTPUTTYPE_WASAPI },
{ "ASIO", FMOD_OUTPUTTYPE_ASIO },
// Linux
{ "OSS", FMOD_OUTPUTTYPE_OSS },
{ "ALSA", FMOD_OUTPUTTYPE_ALSA },
{ "ESD", FMOD_OUTPUTTYPE_ESD },
// Mac
{ "Sound Manager", FMOD_OUTPUTTYPE_SOUNDMANAGER },
{ "Core Audio", FMOD_OUTPUTTYPE_COREAUDIO },
{ NULL, 0 }
};
static const FEnumList SpeakerModeNames[] =
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "Mono", FMOD_SPEAKERMODE_MONO },
{ "Stereo", FMOD_SPEAKERMODE_STEREO },
{ "Quad", FMOD_SPEAKERMODE_QUAD },
{ "Surround", FMOD_SPEAKERMODE_SURROUND },
{ "5.1", FMOD_SPEAKERMODE_5POINT1 },
{ "7.1", FMOD_SPEAKERMODE_7POINT1 },
{ "Prologic", FMOD_SPEAKERMODE_PROLOGIC },
{ "1", FMOD_SPEAKERMODE_MONO },
{ "2", FMOD_SPEAKERMODE_STEREO },
{ "4", FMOD_SPEAKERMODE_QUAD },
{ NULL, 0 }
};
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static const FEnumList ResamplerNames[] =
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "No Interpolation", FMOD_DSP_RESAMPLER_NOINTERP },
{ "NoInterp", FMOD_DSP_RESAMPLER_NOINTERP },
{ "Linear", FMOD_DSP_RESAMPLER_LINEAR },
{ "Cubic", FMOD_DSP_RESAMPLER_CUBIC },
{ "Spline", FMOD_DSP_RESAMPLER_SPLINE },
{ NULL, 0 }
};
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static const FEnumList SoundFormatNames[] =
{
{ "None", FMOD_SOUND_FORMAT_NONE },
{ "PCM-8", FMOD_SOUND_FORMAT_PCM8 },
{ "PCM-16", FMOD_SOUND_FORMAT_PCM16 },
{ "PCM-24", FMOD_SOUND_FORMAT_PCM24 },
{ "PCM-32", FMOD_SOUND_FORMAT_PCM32 },
{ "PCM-Float", FMOD_SOUND_FORMAT_PCMFLOAT },
{ "GCADPCM", FMOD_SOUND_FORMAT_GCADPCM },
{ "IMAADPCM", FMOD_SOUND_FORMAT_IMAADPCM },
{ "VAG", FMOD_SOUND_FORMAT_VAG },
{ "XMA", FMOD_SOUND_FORMAT_XMA },
{ "MPEG", FMOD_SOUND_FORMAT_MPEG },
{ NULL, 0 }
};
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
static const char *OpenStateNames[] =
{
"Ready",
"Loading",
"Error",
"Connecting",
"Buffering",
"Seeking",
"Streaming"
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
};
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// CODE --------------------------------------------------------------------
//==========================================================================
//
// Enum_NumForName
//
// Returns the value of an enum name, or -1 if not found.
//
//==========================================================================
static int Enum_NumForName(const FEnumList *list, const char *name)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
while (list->Name != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (stricmp(list->Name, name) == 0)
{
return list->Value;
}
list++;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return -1;
}
//==========================================================================
//
// Enum_NameForNum
//
// Returns the name of an enum value. If there is more than one name for a
// value, on the first one in the list is returned. Returns NULL if there
// was no match.
//
//==========================================================================
static const char *Enum_NameForNum(const FEnumList *list, int num)
{
while (list->Name != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (list->Value == num)
{
return list->Name;
}
list++;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return NULL;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
//
// The container for a streaming FMOD::Sound, for playing music.
//
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
class FMODStreamCapsule : public SoundStream
{
public:
FMODStreamCapsule(FMOD::Sound *stream, FMODSoundRenderer *owner, const char *url)
: Owner(owner), Stream(NULL), Channel(NULL),
UserData(NULL), Callback(NULL), URL(url), Ended(false)
{
SetStream(stream);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODStreamCapsule(void *udata, SoundStreamCallback callback, FMODSoundRenderer *owner)
: Owner(owner), Stream(NULL), Channel(NULL),
UserData(udata), Callback(callback), Ended(false)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
~FMODStreamCapsule()
{
if (Channel != NULL)
{
Channel->stop();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Stream != NULL)
{
Stream->release();
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void SetStream(FMOD::Sound *stream)
{
float frequency;
Stream = stream;
// As this interface is for music, make it super-high priority.
if (FMOD_OK == stream->getDefaults(&frequency, NULL, NULL, NULL))
{
stream->setDefaults(frequency, 1, 0, 0);
}
}
bool Play(bool looping, float volume)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
if (URL.IsNotEmpty())
{ // Net streams cannot be looped, because they cannot be seeked.
looping = false;
}
Stream->setMode((looping ? FMOD_LOOP_NORMAL : FMOD_LOOP_OFF) | FMOD_SOFTWARE | FMOD_2D);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Owner->Sys->playSound(FMOD_CHANNEL_FREE, Stream, true, &Channel);
if (result != FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Channel->setChannelGroup(Owner->MusicGroup);
Channel->setSpeakerMix(1, 1, 1, 1, 1, 1, 1, 1);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Channel->setVolume(volume);
// Ensure reverb is disabled.
FMOD_REVERB_CHANNELPROPERTIES reverb = { 0, };
if (FMOD_OK == Channel->getReverbProperties(&reverb))
{
reverb.Room = -10000;
Channel->setReverbProperties(&reverb);
}
Channel->setPaused(false);
Ended = false;
JustStarted = true;
Starved = false;
Loop = looping;
Volume = volume;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return true;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void Stop()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Channel != NULL)
{
Channel->stop();
Channel = NULL;
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
bool SetPaused(bool paused)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Channel != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return FMOD_OK == Channel->setPaused(paused);
}
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
unsigned int GetPosition()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
unsigned int pos;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Channel != NULL && FMOD_OK == Channel->getPosition(&pos, FMOD_TIMEUNIT_MS))
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return pos;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return 0;
}
bool IsEnded()
{
bool is;
FMOD_OPENSTATE openstate = FMOD_OPENSTATE_MAX;
bool starving;
if (Stream == NULL)
{
return true;
}
if (FMOD_OK != Stream->getOpenState(&openstate, NULL, &starving))
{
openstate = FMOD_OPENSTATE_ERROR;
}
if (openstate == FMOD_OPENSTATE_ERROR)
{
if (Channel != NULL)
{
Channel->stop();
Channel = NULL;
}
return true;
}
if (Channel != NULL && (FMOD_OK != Channel->isPlaying(&is) || is == false))
{
return true;
}
if (Ended)
{
Channel->stop();
Channel = NULL;
return true;
}
if (URL.IsNotEmpty() && !JustStarted && openstate == FMOD_OPENSTATE_READY)
{
// Reconnect the stream, since it seems to have stalled.
// The only way to do this appears to be to completely recreate it.
FMOD_RESULT result;
Channel->stop();
Stream->release();
Channel = NULL;
Stream = NULL;
Owner->Sys->setStreamBufferSize(64*1024, FMOD_TIMEUNIT_RAWBYTES);
// Open the stream asynchronously, so we don't hang the game while trying to reconnect.
// (It would be nice to do the initial open asynchronously as well, but I'd need to rethink
// the music system design to pull that off.)
result = Owner->Sys->createSound(URL, (Loop ? FMOD_LOOP_NORMAL : FMOD_LOOP_OFF) | FMOD_SOFTWARE | FMOD_2D |
FMOD_CREATESTREAM | FMOD_NONBLOCKING, NULL, &Stream);
JustStarted = true;
Owner->Sys->setStreamBufferSize(16*1024, FMOD_TIMEUNIT_RAWBYTES);
return result != FMOD_OK;
}
if (JustStarted && openstate == FMOD_OPENSTATE_STREAMING)
{
JustStarted = false;
}
if (JustStarted && Channel == NULL && openstate == FMOD_OPENSTATE_READY)
{
return !Play(Loop, Volume);
}
if (starving != Starved)
{ // Mute the sound if it's starving.
Channel->setVolume(starving ? 0 : Volume);
Starved = starving;
}
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void SetVolume(float volume)
{
if (Channel != NULL && !Starved)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Channel->setVolume(volume);
}
Volume = volume;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Sets the current order number for a MOD-type song, or the position in ms
// for anything else.
bool SetPosition(int pos)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_SOUND_TYPE type;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == Stream->getFormat(&type, NULL, NULL, NULL) &&
(type == FMOD_SOUND_TYPE_IT ||
type == FMOD_SOUND_TYPE_MOD ||
type == FMOD_SOUND_TYPE_S3M ||
type == FMOD_SOUND_TYPE_XM))
{
return FMOD_OK == Channel->setPosition(pos, FMOD_TIMEUNIT_MODORDER);
}
return FMOD_OK == Channel->setPosition(pos, FMOD_TIMEUNIT_MS);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
FString GetStats()
{
FString stats;
FMOD_OPENSTATE openstate;
unsigned int percentbuffered;
unsigned int position;
bool starving;
float volume;
float frequency;
bool paused;
bool isplaying;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (FMOD_OK == Stream->getOpenState(&openstate, &percentbuffered, &starving))
{
stats = (openstate <= FMOD_OPENSTATE_STREAMING ? OpenStateNames[openstate] : "Unknown state");
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
stats.AppendFormat(",%3d%% buffered, %s", percentbuffered, starving ? "Starving" : "Well-fed");
}
if (Channel == NULL)
{
stats += ", not playing";
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (Channel != NULL && FMOD_OK == Channel->getPosition(&position, FMOD_TIMEUNIT_MS))
{
stats.AppendFormat(", %d", position);
if (FMOD_OK == Stream->getLength(&position, FMOD_TIMEUNIT_MS))
{
stats.AppendFormat("/%d", position);
}
stats += " ms";
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
}
if (Channel != NULL && FMOD_OK == Channel->getVolume(&volume))
{
stats.AppendFormat(", %d%%", int(volume * 100));
}
if (Channel != NULL && FMOD_OK == Channel->getPaused(&paused) && paused)
{
stats += ", paused";
}
if (Channel != NULL && FMOD_OK == Channel->isPlaying(&isplaying) && isplaying)
{
stats += ", playing";
}
if (Channel != NULL && FMOD_OK == Channel->getFrequency(&frequency))
{
stats.AppendFormat(", %g Hz", frequency);
}
if (JustStarted)
{
stats += " JS";
}
if (Ended)
{
stats += " XX";
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
return stats;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static FMOD_RESULT F_CALLBACK PCMReadCallback(FMOD_SOUND *sound, void *data, unsigned int datalen)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMODStreamCapsule *self;
result = ((FMOD::Sound *)sound)->getUserData((void **)&self);
if (result != FMOD_OK || self == NULL || self->Callback == NULL || self->Ended)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{
// Contrary to the docs, this return value is completely ignored.
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return FMOD_OK;
}
if (!self->Callback(self, data, datalen, self->UserData))
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{
self->Ended = true;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
return FMOD_OK;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static FMOD_RESULT F_CALLBACK PCMSetPosCallback(FMOD_SOUND *sound, int subsound, unsigned int position, FMOD_TIMEUNIT postype)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// This is useful if the user calls Channel::setPosition and you want
// to seek your data accordingly.
return FMOD_OK;
}
private:
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODSoundRenderer *Owner;
FMOD::Sound *Stream;
FMOD::Channel *Channel;
void *UserData;
SoundStreamCallback Callback;
FString URL;
bool Ended;
bool JustStarted;
bool Starved;
bool Loop;
float Volume;
};
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
//
// The interface the game uses to talk to FMOD.
//
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODSoundRenderer::FMODSoundRenderer()
{
InitSuccess = Init();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODSoundRenderer::~FMODSoundRenderer()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Shutdown();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
bool FMODSoundRenderer::IsValid()
{
return InitSuccess;
}
//==========================================================================
//
// FMODSoundRenderer :: Init
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
bool FMODSoundRenderer::Init()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
unsigned int version;
FMOD_SPEAKERMODE speakermode;
FMOD_SOUND_FORMAT format;
FMOD_DSP_RESAMPLER resampler;
FMOD_INITFLAGS initflags;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
int samplerate;
int driver;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
int eval;
SFXPaused = 0;
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
DSPLocked = false;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
MusicGroup = NULL;
SfxGroup = NULL;
PausableSfx = NULL;
SfxConnection = NULL;
WaterLP = NULL;
WaterReverb = NULL;
PrevEnvironment = DefaultEnvironments[0];
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
DSPClock.AsOne = 0;
ChannelGroupTargetUnit = NULL;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
Printf("I_InitSound: Initializing FMOD\n");
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Create a System object and initialize.
result = FMOD::System_Create(&Sys);
if (result != FMOD_OK)
{
Sys = NULL;
Printf(TEXTCOLOR_ORANGE"Failed to create FMOD system object: Error %d\n", result);
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->getVersion(&version);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_ORANGE"Could not validate FMOD version: Error %d\n", result);
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
const char *wrongver = NULL;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (version < FMOD_VERSION)
{
wrongver = "an old";
}
else if ((version & 0xFFFF00) > (FMOD_VERSION & 0xFFFF00))
{
wrongver = "a new";
}
if (wrongver != NULL)
{
Printf (" "TEXTCOLOR_ORANGE"Error! You are using %s version of FMOD (%x.%02x.%02x).\n"
" "TEXTCOLOR_ORANGE"This program requires version %x.%02x.%02x\n",
wrongver,
version >> 16, (version >> 8) & 255, version & 255,
FMOD_VERSION >> 16, (FMOD_VERSION >> 8) & 255, FMOD_VERSION & 255);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (!ShowedBanner)
{
Printf("FMOD Sound System, copyright <20> Firelight Technologies Pty, Ltd., 1994-2008.\n");
ShowedBanner = true;
}
#ifdef _WIN32
if (OSPlatform == os_WinNT4)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// The following was true as of FMOD 3. I don't know if it still
// applies to FMOD Ex, nor do I have an NT 4 install anymore, but
// there's no reason to get rid of it yet.
//
// If running Windows NT 4, we need to initialize DirectSound before
// using WinMM. If we don't, then FSOUND_Close will corrupt a
// heap. This might just be the Audigy's drivers--I don't know why
// it happens. At least the fix is simple enough. I only need to
// initialize DirectSound once, and then I can initialize/close
// WinMM as many times as I want.
//
// Yes, using WinMM under NT 4 is a good idea. I can get latencies as
// low as 20 ms with WinMM, but with DirectSound I need to have the
// latency as high as 120 ms to avoid crackling--quite the opposite
// from the other Windows versions with real DirectSound support.
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static bool inited_dsound = false;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (!inited_dsound)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Sys->setOutput(FMOD_OUTPUTTYPE_DSOUND) == FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Sys->init(1, FMOD_INIT_NORMAL, 0) == FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
inited_dsound = true;
Sleep(50);
Sys->close();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->setOutput(FMOD_OUTPUTTYPE_WINMM);
}
}
}
#endif
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Set the user specified output mode.
eval = Enum_NumForName(OutputNames, snd_output);
if (eval >= 0)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->setOutput(FMOD_OUTPUTTYPE(eval));
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Setting output type '%s' failed. Using default instead. (Error %d)\n", *snd_output, result);
Sys->setOutput(FMOD_OUTPUTTYPE_AUTODETECT);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
result = Sys->getNumDrivers(&driver);
if (result == FMOD_OK)
{
if (snd_driver >= driver)
{
Printf(TEXTCOLOR_BLUE"Driver %d does not exist. Using 0.\n", *snd_driver);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
driver = 0;
}
else
{
driver = snd_driver;
}
result = Sys->setDriver(driver);
}
result = Sys->getDriver(&driver);
result = Sys->getDriverCaps(driver, &Driver_Caps, &Driver_MinFrequency, &Driver_MaxFrequency, &speakermode);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Could not ascertain driver capabilities. Some things may be weird. (Error %d)\n", result);
// Fill in some default to pretend it worked. (But as long as we specify a valid driver,
// can this call actually fail?)
Driver_Caps = 0;
Driver_MinFrequency = 4000;
Driver_MaxFrequency = 48000;
speakermode = FMOD_SPEAKERMODE_STEREO;
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
// Set the user selected speaker mode.
eval = Enum_NumForName(SpeakerModeNames, snd_speakermode);
if (eval >= 0)
{
speakermode = FMOD_SPEAKERMODE(eval);
}
result = Sys->setSpeakerMode(speakermode);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Could not set speaker mode to '%s'. (Error %d)\n", *snd_speakermode, result);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
// Set software format
eval = Enum_NumForName(SoundFormatNames, snd_output_format);
format = eval >= 0 ? FMOD_SOUND_FORMAT(eval) : FMOD_SOUND_FORMAT_PCM16;
eval = Enum_NumForName(ResamplerNames, snd_resampler);
resampler = eval >= 0 ? FMOD_DSP_RESAMPLER(eval) : FMOD_DSP_RESAMPLER_LINEAR;
samplerate = clamp<int>(snd_samplerate, Driver_MinFrequency, Driver_MaxFrequency);
if (samplerate == 0 || snd_samplerate == 0)
{ // Creative's ASIO drivers report the only supported frequency as 0!
if (FMOD_OK != Sys->getSoftwareFormat(&samplerate, NULL, NULL, NULL, NULL, NULL))
{
samplerate = 48000;
}
}
if (samplerate != snd_samplerate && snd_samplerate != 0)
{
Printf(TEXTCOLOR_BLUE"Sample rate %d is unsupported. Trying %d.\n", *snd_samplerate, samplerate);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
}
result = Sys->setSoftwareFormat(samplerate, format, 0, 0, resampler);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Could not set mixing format. Defaults will be used. (Error %d)\n", result);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
// Set software channels according to snd_channels
result = Sys->setSoftwareChannels(snd_channels + NUM_EXTRA_SOFTWARE_CHANNELS);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Failed to set the preferred number of channels. (Error %d)\n", result);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Driver_Caps & FMOD_CAPS_HARDWARE_EMULATED)
{ // The user has the 'Acceleration' slider set to off!
// This is really bad for latency!
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
Printf (TEXTCOLOR_BLUE"Warning: The sound acceleration slider has been set to off.\n");
Printf (TEXTCOLOR_BLUE"Please turn it back on if you want decent sound.\n");
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->setDSPBufferSize(1024, 10); // At 48khz, the latency between issuing an fmod command and hearing it will now be about 213ms.
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
else if (snd_buffersize != 0 || snd_buffercount != 0)
{
int buffersize = snd_buffersize ? snd_buffersize : 1024;
int buffercount = snd_buffercount ? snd_buffercount : 4;
result = Sys->setDSPBufferSize(buffersize, buffercount);
}
else
{
result = FMOD_OK;
}
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Setting DSP buffer size failed. (Error %d)\n", result);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Try to init
initflags = FMOD_INIT_NORMAL;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (snd_hrtf)
{
initflags |= FMOD_INIT_SOFTWARE_HRTF;
}
if (snd_profile)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{
initflags |= FMOD_INIT_ENABLE_PROFILE;
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
for (;;)
{
result = Sys->init(snd_channels + NUM_EXTRA_SOFTWARE_CHANNELS, initflags, 0);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (result == FMOD_ERR_OUTPUT_CREATEBUFFER)
{
// Possible causes of a buffer creation failure:
// 1. The speaker mode selected isn't supported by this soundcard. Force it to stereo.
// 2. The output format is unsupported. Force it to 16-bit PCM.
// 3. ???
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
result = Sys->getSpeakerMode(&speakermode);
if (result == FMOD_OK &&
speakermode != FMOD_SPEAKERMODE_STEREO &&
FMOD_OK == Sys->setSpeakerMode(FMOD_SPEAKERMODE_STEREO))
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
{
Printf(TEXTCOLOR_RED" Buffer creation failed. Retrying with stereo output.\n");
continue;
}
result = Sys->getSoftwareFormat(&samplerate, &format, NULL, NULL, &resampler, NULL);
if (result == FMOD_OK &&
format != FMOD_SOUND_FORMAT_PCM16 &&
FMOD_OK == Sys->setSoftwareFormat(samplerate, FMOD_SOUND_FORMAT_PCM16, 0, 0, resampler))
{
Printf(TEXTCOLOR_RED" Buffer creation failed. Retrying with PCM-16 output.\n");
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
continue;
}
}
#ifdef _WIN32
else if (result == FMOD_ERR_OUTPUT_INIT)
{
FMOD_OUTPUTTYPE output;
result = Sys->getOutput(&output);
if (result == FMOD_OK && output != FMOD_OUTPUTTYPE_DSOUND)
{
Printf(TEXTCOLOR_BLUE" Init failed for output type %s. Retrying with DirectSound.\n",
Enum_NameForNum(OutputNames, output));
if (FMOD_OK == Sys->setOutput(FMOD_OUTPUTTYPE_DSOUND))
{
continue;
}
}
}
#endif
break;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
if (result != FMOD_OK)
{ // Initializing FMOD failed. Cry cry.
Printf(TEXTCOLOR_ORANGE" System::init returned error code %d\n", result);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return false;
}
// Create channel groups
result = Sys->createChannelGroup("Music", &MusicGroup);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_ORANGE" Could not create music channel group. (Error %d)\n", result);
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->createChannelGroup("SFX", &SfxGroup);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_ORANGE" Could not create sfx channel group. (Error %d)\n", result);
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->createChannelGroup("Pausable SFX", &PausableSfx);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_ORANGE" Could not create pausable sfx channel group. (Error %d)\n", result);
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = SfxGroup->addGroup(PausableSfx);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE" Could not attach pausable sfx to sfx channel group. (Error %d)\n", result);
}
// Create DSP units for underwater effect
result = Sys->createDSPByType(FMOD_DSP_TYPE_LOWPASS, &WaterLP);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE" Could not create underwater lowpass unit. (Error %d)\n", result);
}
else
{
result = Sys->createDSPByType(FMOD_DSP_TYPE_REVERB, &WaterReverb);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE" Could not create underwater reverb unit. (Error %d)\n", result);
}
}
// Connect underwater DSP unit between PausableSFX and SFX groups, while
// retaining the connection established by SfxGroup->addGroup().
if (WaterLP != NULL)
{
FMOD::DSP *sfx_head, *pausable_head;
result = SfxGroup->getDSPHead(&sfx_head);
result = sfx_head->getInput(0, &pausable_head, &SfxConnection);
result = WaterLP->addInput(pausable_head, NULL);
WaterLP->setActive(false);
WaterLP->setParameter(FMOD_DSP_LOWPASS_CUTOFF, snd_waterlp);
WaterLP->setParameter(FMOD_DSP_LOWPASS_RESONANCE, 2);
if (WaterReverb != NULL)
{
FMOD::DSPConnection *dry;
result = WaterReverb->addInput(pausable_head, &dry);
result = dry->setMix(0.1f);
result = WaterReverb->addInput(WaterLP, NULL);
result = sfx_head->addInput(WaterReverb, NULL);
WaterReverb->setParameter(FMOD_DSP_REVERB_ROOMSIZE, 0.001f);
WaterReverb->setParameter(FMOD_DSP_REVERB_DAMP, 0.2f);
WaterReverb->setActive(false);
}
else
{
result = sfx_head->addInput(WaterLP, NULL);
}
}
LastWaterLP = snd_waterlp;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Find the FMOD Channel Group Target Unit. To completely eliminate sound
// while the program is deactivated, we can deactivate this DSP unit, and
// all audio processing will cease. This is not directly exposed by the
// API but can be easily located by getting the master channel group and
// tracing its single output, since it is known to hook up directly to the
// Channel Group Target Unit. (See FMOD Profiler for proof.)
FMOD::ChannelGroup *master_group;
result = Sys->getMasterChannelGroup(&master_group);
if (result == FMOD_OK)
{
FMOD::DSP *master_head;
result = master_group->getDSPHead(&master_head);
if (result == FMOD_OK)
{
result = master_head->getOutput(0, &ChannelGroupTargetUnit, NULL);
if (result != FMOD_OK)
{
ChannelGroupTargetUnit = NULL;
}
}
}
result = SPC_CreateCodec(Sys);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE" Could not register SPC codec. (Error %d)\n", result);
}
if (FMOD_OK != Sys->getSoftwareFormat(&OutputRate, NULL, NULL, NULL, NULL, NULL))
{
OutputRate = 48000; // Guess, but this should never happen.
}
Sys->set3DSettings(0.5f, 96.f, 1.f);
Sys->set3DRolloffCallback(RolloffCallback);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
snd_sfxvolume.Callback ();
return true;
}
//==========================================================================
//
// FMODSoundRenderer :: Shutdown
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::Shutdown()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Sys != NULL)
{
unsigned int i;
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
//S_StopAllChannels();
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (MusicGroup != NULL)
{
MusicGroup->release();
MusicGroup = NULL;
}
if (PausableSfx != NULL)
{
PausableSfx->release();
PausableSfx = NULL;
}
if (SfxGroup != NULL)
{
SfxGroup->release();
SfxGroup = NULL;
}
if (WaterLP != NULL)
{
WaterLP->release();
WaterLP = NULL;
}
if (WaterReverb != NULL)
{
WaterReverb->release();
WaterReverb = NULL;
}
// Free all loaded samples
for (i = 0; i < S_sfx.Size(); i++)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (S_sfx[i].data != NULL)
{
((FMOD::Sound *)S_sfx[i].data)->release();
S_sfx[i].data = NULL;
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->close();
Sys->release();
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys = NULL;
}
}
//==========================================================================
//
// FMODSoundRenderer :: GetOutputRate
//
//==========================================================================
float FMODSoundRenderer::GetOutputRate()
{
return (float)OutputRate;
}
//==========================================================================
//
// FMODSoundRenderer :: PrintStatus
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::PrintStatus()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_OUTPUTTYPE output;
FMOD_SPEAKERMODE speakermode;
FMOD_SOUND_FORMAT format;
FMOD_DSP_RESAMPLER resampler;
int driver;
int samplerate;
int numoutputchannels;
int num2d, num3d, total;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
unsigned int bufferlength;
int numbuffers;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == Sys->getOutput(&output))
{
Printf ("Output type: "TEXTCOLOR_GREEN"%s\n", Enum_NameForNum(OutputNames, output));
}
if (FMOD_OK == Sys->getSpeakerMode(&speakermode))
{
Printf ("Speaker mode: "TEXTCOLOR_GREEN"%s\n", Enum_NameForNum(SpeakerModeNames, speakermode));
}
if (FMOD_OK == Sys->getDriver(&driver))
{
char name[256];
if (FMOD_OK != Sys->getDriverInfo(driver, name, sizeof(name), NULL))
{
strcpy(name, "Unknown");
}
Printf ("Driver: "TEXTCOLOR_GREEN"%d"TEXTCOLOR_NORMAL" ("TEXTCOLOR_ORANGE"%s"TEXTCOLOR_NORMAL")\n", driver, name);
DumpDriverCaps(Driver_Caps, Driver_MinFrequency, Driver_MaxFrequency);
}
if (FMOD_OK == Sys->getHardwareChannels(&num2d, &num3d, &total))
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Printf (TEXTCOLOR_YELLOW "Hardware 2D channels: "TEXTCOLOR_GREEN"%d\n", num2d);
Printf (TEXTCOLOR_YELLOW "Hardware 3D channels: "TEXTCOLOR_GREEN"%d\n", num3d);
Printf (TEXTCOLOR_YELLOW "Total hardware channels: "TEXTCOLOR_GREEN"%d\n", total);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == Sys->getSoftwareFormat(&samplerate, &format, &numoutputchannels, NULL, &resampler, NULL))
{
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer sample rate: "TEXTCOLOR_GREEN"%d\n", samplerate);
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer format: "TEXTCOLOR_GREEN"%s\n", Enum_NameForNum(SoundFormatNames, format));
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer channels: "TEXTCOLOR_GREEN"%d\n", numoutputchannels);
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer resampler: "TEXTCOLOR_GREEN"%s\n", Enum_NameForNum(ResamplerNames, resampler));
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (FMOD_OK == Sys->getDSPBufferSize(&bufferlength, &numbuffers))
{
Printf (TEXTCOLOR_LIGHTBLUE "DSP buffers: "TEXTCOLOR_GREEN"%u samples x %d\n", bufferlength, numbuffers);
}
}
//==========================================================================
//
// FMODSoundRenderer :: DumpDriverCaps
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::DumpDriverCaps(FMOD_CAPS caps, int minfrequency, int maxfrequency)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Printf (TEXTCOLOR_OLIVE " Min. frequency: "TEXTCOLOR_GREEN"%d\n", minfrequency);
Printf (TEXTCOLOR_OLIVE " Max. frequency: "TEXTCOLOR_GREEN"%d\n", maxfrequency);
Printf (" Features:\n");
if (caps == 0) Printf(TEXTCOLOR_OLIVE " None\n");
if (caps & FMOD_CAPS_HARDWARE) Printf(TEXTCOLOR_OLIVE " Hardware mixing\n");
if (caps & FMOD_CAPS_HARDWARE_EMULATED) Printf(TEXTCOLOR_OLIVE " Hardware acceleration is turned off!\n");
if (caps & FMOD_CAPS_OUTPUT_MULTICHANNEL) Printf(TEXTCOLOR_OLIVE " Multichannel\n");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM8) Printf(TEXTCOLOR_OLIVE " PCM-8");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM16) Printf(TEXTCOLOR_OLIVE " PCM-16");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM24) Printf(TEXTCOLOR_OLIVE " PCM-24");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM32) Printf(TEXTCOLOR_OLIVE " PCM-32");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCMFLOAT) Printf(TEXTCOLOR_OLIVE " PCM-Float");
if (caps & (FMOD_CAPS_OUTPUT_FORMAT_PCM8 | FMOD_CAPS_OUTPUT_FORMAT_PCM16 | FMOD_CAPS_OUTPUT_FORMAT_PCM24 | FMOD_CAPS_OUTPUT_FORMAT_PCM32 | FMOD_CAPS_OUTPUT_FORMAT_PCMFLOAT))
{
Printf("\n");
}
if (caps & FMOD_CAPS_REVERB_EAX2) Printf(TEXTCOLOR_OLIVE " EAX2");
if (caps & FMOD_CAPS_REVERB_EAX3) Printf(TEXTCOLOR_OLIVE " EAX3");
if (caps & FMOD_CAPS_REVERB_EAX4) Printf(TEXTCOLOR_OLIVE " EAX4");
if (caps & FMOD_CAPS_REVERB_EAX5) Printf(TEXTCOLOR_OLIVE " EAX5");
if (caps & FMOD_CAPS_REVERB_I3DL2) Printf(TEXTCOLOR_OLIVE " I3DL2");
if (caps & (FMOD_CAPS_REVERB_EAX2 | FMOD_CAPS_REVERB_EAX3 | FMOD_CAPS_REVERB_EAX4 | FMOD_CAPS_REVERB_EAX5 | FMOD_CAPS_REVERB_I3DL2))
{
Printf("\n");
}
if (caps & FMOD_CAPS_REVERB_LIMITED) Printf("TEXTCOLOR_OLIVE Limited reverb\n");
}
//==========================================================================
//
// FMODSoundRenderer :: PrintDriversList
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::PrintDriversList()
{
int numdrivers;
int i;
char name[256];
if (FMOD_OK == Sys->getNumDrivers(&numdrivers))
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
for (i = 0; i < numdrivers; ++i)
{
if (FMOD_OK == Sys->getDriverInfo(i, name, sizeof(name), NULL))
{
Printf("%d. %s\n", i, name);
}
}
}
}
//==========================================================================
//
// FMODSoundRenderer :: GatherStats
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FString FMODSoundRenderer::GatherStats()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
int channels;
float dsp, stream, update, total;
FString out;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
channels = 0;
total = update = stream = dsp = 0;
Sys->getChannelsPlaying(&channels);
Sys->getCPUUsage(&dsp, &stream, &update, &total);
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
out.Format ("%d channels,"TEXTCOLOR_YELLOW"%5.2f"TEXTCOLOR_NORMAL"%% CPU "
"(DSP:"TEXTCOLOR_YELLOW"%2.2f"TEXTCOLOR_NORMAL"%% "
"Stream:"TEXTCOLOR_YELLOW"%2.2f"TEXTCOLOR_NORMAL"%% "
"Update:"TEXTCOLOR_YELLOW"%2.2f"TEXTCOLOR_NORMAL"%%)",
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
channels, total, dsp, stream, update);
return out;
}
//==========================================================================
//
// FMODSoundRenderer :: SetSfxVolume
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::SetSfxVolume(float volume)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
SfxGroup->setVolume(volume);
}
//==========================================================================
//
// FMODSoundRenderer :: SetMusicVolume
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::SetMusicVolume(float volume)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
MusicGroup->setVolume(volume);
}
//==========================================================================
//
// FMODSoundRenderer :: CreateStream
//
// Creates a streaming sound that receives PCM data through a callback.
//
//==========================================================================
SoundStream *FMODSoundRenderer::CreateStream (SoundStreamCallback callback, int buffbytes, int flags, int samplerate, void *userdata)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODStreamCapsule *capsule;
FMOD::Sound *sound;
FMOD_RESULT result;
FMOD_CREATESOUNDEXINFO exinfo = { sizeof(exinfo), };
FMOD_MODE mode;
int sample_shift;
int channel_shift;
2006-04-14 12:58:52 +00:00
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
capsule = new FMODStreamCapsule (userdata, callback, this);
mode = FMOD_2D | FMOD_OPENUSER | FMOD_LOOP_NORMAL | FMOD_SOFTWARE | FMOD_CREATESTREAM | FMOD_OPENONLY;
sample_shift = (flags & (SoundStream::Bits32 | SoundStream::Float)) ? 2 : (flags & SoundStream::Bits8) ? 0 : 1;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
channel_shift = (flags & SoundStream::Mono) ? 0 : 1;
// Chunk size of stream update in samples. This will be the amount of data
// passed to the user callback.
exinfo.decodebuffersize = buffbytes >> (sample_shift + channel_shift);
// Number of channels in the sound.
exinfo.numchannels = 1 << channel_shift;
2006-04-14 12:58:52 +00:00
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Length of PCM data in bytes of whole song (for Sound::getLength).
// This pretends it's extremely long.
exinfo.length = ~0u;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Default playback rate of sound. */
exinfo.defaultfrequency = samplerate;
// Data format of sound.
if (flags & SoundStream::Float)
{
exinfo.format = FMOD_SOUND_FORMAT_PCMFLOAT;
}
else if (flags & SoundStream::Bits32)
{
exinfo.format = FMOD_SOUND_FORMAT_PCM32;
}
else if (flags & SoundStream::Bits8)
{
exinfo.format = FMOD_SOUND_FORMAT_PCM8;
}
else
{
exinfo.format = FMOD_SOUND_FORMAT_PCM16;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// User callback for reading.
exinfo.pcmreadcallback = FMODStreamCapsule::PCMReadCallback;
// User callback for seeking.
exinfo.pcmsetposcallback = FMODStreamCapsule::PCMSetPosCallback;
// User data to be attached to the sound during creation. Access via Sound::getUserData.
exinfo.userdata = capsule;
result = Sys->createSound(NULL, mode, &exinfo, &sound);
if (result != FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
delete capsule;
return NULL;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
capsule->SetStream(sound);
return capsule;
}
//==========================================================================
//
// FMODSoundRenderer :: OpenStream
//
// Creates a streaming sound from a file on disk.
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
SoundStream *FMODSoundRenderer::OpenStream(const char *filename_or_data, int flags, int offset, int length)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_MODE mode;
FMOD_CREATESOUNDEXINFO exinfo = { sizeof(exinfo), };
FMOD::Sound *stream;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
FMOD_RESULT result;
bool url;
2006-04-14 12:58:52 +00:00
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
mode = FMOD_SOFTWARE | FMOD_2D | FMOD_CREATESTREAM;
if (flags & SoundStream::Loop)
2006-04-14 12:58:52 +00:00
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
mode |= FMOD_LOOP_NORMAL;
2006-04-14 12:58:52 +00:00
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (offset == -1)
{
mode |= FMOD_OPENMEMORY;
offset = 0;
}
exinfo.length = length;
exinfo.fileoffset = offset;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if ((*snd_midipatchset)[0] != '\0')
{
exinfo.dlsname = snd_midipatchset;
}
2006-04-14 12:58:52 +00:00
url = (offset == 0 && length == 0 && strstr(filename_or_data, "://") > filename_or_data);
if (url)
{
// Use a larger buffer for URLs so that it's less likely to be effected
// by hiccups in the data rate from the remote server.
Sys->setStreamBufferSize(64*1024, FMOD_TIMEUNIT_RAWBYTES);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
result = Sys->createSound(filename_or_data, mode, &exinfo, &stream);
if (url)
{
// Restore standard buffer size.
Sys->setStreamBufferSize(16*1024, FMOD_TIMEUNIT_RAWBYTES);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (result == FMOD_ERR_FORMAT && exinfo.dlsname != NULL)
{
// FMOD_ERR_FORMAT could refer to either the main sound file or
// to the DLS instrument set. Try again without special DLS
// instruments to see if that lets it succeed.
exinfo.dlsname = NULL;
result = Sys->createSound(filename_or_data, mode, &exinfo, &stream);
if (result == FMOD_OK)
{
Printf("%s is an unsupported format.\n", *snd_midipatchset);
}
}
if (result == FMOD_OK)
{
return new FMODStreamCapsule(stream, this, url ? filename_or_data : NULL);
}
return NULL;
}
//==========================================================================
//
// FMODSoundRenderer :: StartSound
//
//==========================================================================
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
FSoundChan *FMODSoundRenderer::StartSound(sfxinfo_t *sfx, float vol, int pitch, int chanflags, FSoundChan *reuse_chan)
{
int id = int(sfx - &S_sfx[0]);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMOD_MODE mode;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD::Channel *chan;
float freq;
if (FMOD_OK == ((FMOD::Sound *)sfx->data)->getDefaults(&freq, NULL, NULL, NULL))
{
freq = PITCH(freq, pitch);
}
else
{
freq = 0;
}
GSfxInfo = sfx;
result = Sys->playSound(FMOD_CHANNEL_FREE, (FMOD::Sound *)sfx->data, true, &chan);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == result)
{
result = chan->getMode(&mode);
if (result != FMOD_OK)
{
assert(0);
mode = FMOD_SOFTWARE;
}
mode = (mode & ~FMOD_3D) | FMOD_2D;
if (chanflags & CHAN_LOOP)
{
mode = (mode & ~FMOD_LOOP_OFF) | FMOD_LOOP_NORMAL;
}
chan->setMode(mode);
chan->setChannelGroup((chanflags & (CHAN_UI | CHAN_NOPAUSE)) ? SfxGroup : PausableSfx);
if (freq != 0)
{
chan->setFrequency(freq);
}
chan->setVolume(vol);
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
HandleChannelDelay(chan, reuse_chan, freq);
chan->setPaused(false);
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
return CommonChannelSetup(chan, reuse_chan);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
DPrintf ("Sound %s failed to play: %d\n", sfx->name.GetChars(), result);
return 0;
}
//==========================================================================
//
// FMODSoundRenderer :: StartSound3D
//
//==========================================================================
CVAR(Float, snd_3dspread, 180, 0)
FSoundChan *FMODSoundRenderer::StartSound3D(sfxinfo_t *sfx, float vol, float distscale,
int pitch, int priority, const FVector3 &pos, const FVector3 &vel, const sector_t *sector,
int channum, int chanflags, FSoundChan *reuse_chan)
{
int id = int(sfx - &S_sfx[0]);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMOD_MODE mode;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD::Channel *chan;
float freq;
float def_freq, def_vol, def_pan;
int numchans;
int def_priority;
if (FMOD_OK == ((FMOD::Sound *)sfx->data)->getDefaults(&def_freq, &def_vol, &def_pan, &def_priority))
{
freq = PITCH(def_freq, pitch);
// Change the sound's default priority before playing it.
((FMOD::Sound *)sfx->data)->setDefaults(def_freq, def_vol, def_pan, clamp(def_priority - priority, 1, 256));
}
else
{
freq = 0;
def_priority = -1;
}
// Play it.
GSfxInfo = sfx;
GDistScale = distscale;
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
// Experiments indicate that playSound will ignore priorities and always succeed
// as long as the paremeters are set properly. It will first try to kick out sounds
// with the same priority level but has no problem with kicking out sounds at
// higher priority levels if it needs to.
result = Sys->playSound(FMOD_CHANNEL_FREE, (FMOD::Sound *)sfx->data, true, &chan);
// Then set the priority back.
if (def_priority >= 0)
{
((FMOD::Sound *)sfx->data)->setDefaults(def_freq, def_vol, def_pan, def_priority);
}
// Reduce volume of stereo sounds, because each channel will be summed together
// and is likely to be very similar, resulting in an amplitude twice what it
// would have been had it been mixed to mono.
if (FMOD_OK == ((FMOD::Sound *)sfx->data)->getFormat(NULL, NULL, &numchans, NULL))
{
if (numchans > 1)
{
vol *= 0.5f;
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == result)
{
result = chan->getMode(&mode);
if (result != FMOD_OK)
{
mode = FMOD_3D | FMOD_SOFTWARE;
}
if (chanflags & CHAN_LOOP)
{
mode = (mode & ~FMOD_LOOP_OFF) | FMOD_LOOP_NORMAL;
}
mode = SetChanHeadSettings(chan, sfx, pos, channum, chanflags, sector, mode);
chan->setMode(mode);
chan->setChannelGroup((chanflags & (CHAN_UI | CHAN_NOPAUSE)) ? SfxGroup : PausableSfx);
if (freq != 0)
{
chan->setFrequency(freq);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
chan->setVolume(vol);
if (mode & FMOD_3D)
{
chan->set3DAttributes((FMOD_VECTOR *)&pos[0], (FMOD_VECTOR *)&vel[0]);
chan->set3DSpread(snd_3dspread);
}
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
HandleChannelDelay(chan, reuse_chan, freq);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
chan->setPaused(false);
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
FSoundChan *schan = CommonChannelSetup(chan, reuse_chan);
return schan;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
DPrintf ("Sound %s failed to play: %d\n", sfx->name.GetChars(), result);
return 0;
}
//==========================================================================
//
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
// FMODSoundRenderer :: HandleChannelDelay
//
// If the sound is restarting, seek it to its proper place.
// Otherwise, record its starting time.
//
//==========================================================================
void FMODSoundRenderer::HandleChannelDelay(FMOD::Channel *chan, FSoundChan *reuse_chan, float freq) const
{
if (reuse_chan != NULL)
{ // Sound is being restarted, so seek it to the position
// it would be in now if it had never been evicted.
QWORD_UNION nowtime;
chan->getDelay(FMOD_DELAYTYPE_DSPCLOCK_START, &nowtime.Hi, &nowtime.Lo);
// If CHAN_ABSTIME is set, the sound is being restored, and
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
// the channel's start time is actually its seek position.
if (reuse_chan->ChanFlags & CHAN_ABSTIME)
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
{
unsigned int seekpos = reuse_chan->StartTime.Lo;
if (seekpos > 0)
{
chan->setPosition(seekpos, FMOD_TIMEUNIT_PCM);
}
reuse_chan->StartTime.AsOne = QWORD(nowtime.AsOne - seekpos * OutputRate / freq);
reuse_chan->ChanFlags &= ~CHAN_ABSTIME;
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
}
else
{
QWORD difftime = nowtime.AsOne - reuse_chan->StartTime.AsOne;
if (difftime > 0)
{
chan->setPosition((unsigned int)(difftime / OutputRate), FMOD_TIMEUNIT_MS);
}
}
}
else
{
chan->setDelay(FMOD_DELAYTYPE_DSPCLOCK_START, DSPClock.Hi, DSPClock.Lo);
}
}
//==========================================================================
//
// FMODSoundRenderer :: SetChanHeadSettings
//
// If this sound is played at the same coordinates as the listener, make
// it head relative. Also, area sounds should use no 3D panning if close
// enough to the listener.
//
//==========================================================================
FMOD_MODE FMODSoundRenderer::SetChanHeadSettings(FMOD::Channel *chan, sfxinfo_t *sfx, const FVector3 &pos, int channum, int chanflags, const sector_t *sec, FMOD_MODE oldmode) const
{
if (players[consoleplayer].camera == NULL)
{
return oldmode;
}
FVector3 cpos, mpos;
cpos.X = FIXED2FLOAT(players[consoleplayer].camera->x);
cpos.Y = FIXED2FLOAT(players[consoleplayer].camera->z);
cpos.Z = FIXED2FLOAT(players[consoleplayer].camera->y);
if (chanflags & CHAN_AREA)
{
float level, old_level;
// How far are we from the perceived sound origin? Within a certain
// short distance, we interpolate between 2D panning and full 3D panning.
const double interp_range = 32.0;
double dist_sqr = (cpos - pos).LengthSquared();
if (dist_sqr == 0)
{
level = 0;
}
else if (dist_sqr <= interp_range * interp_range)
{ // Within interp_range: Interpolate between none and full 3D panning.
level = float(1 - (interp_range - sqrt(dist_sqr)) / interp_range);
}
else
{ // Beyond interp_range: Normal 3D panning.
level = 1;
}
if (chan->get3DPanLevel(&old_level) == FMOD_OK && old_level != level)
{ // Only set it if it's different.
chan->set3DPanLevel(level);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (level < 1)
{ // Let the noise come from all speakers, not just the front ones.
// A centered 3D sound does not play at full volume, so neither should the 2D-panned one.
// This is sqrt(0.5), which is the result for a centered equal power panning.
chan->setSpeakerMix(0.70711f,0.70711f,0.70711f,0.70711f,0.70711f,0.70711f,0.70711f,0.70711f);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
}
}
return oldmode;
}
else if (cpos == pos)
{ // Head relative
return (oldmode & ~FMOD_3D) | FMOD_2D;
}
// World relative
return (oldmode & ~FMOD_2D) | FMOD_3D;
}
//==========================================================================
//
// FMODSoundRenderer :: CommonChannelSetup
//
// Assign an end callback to the channel and allocates a game channel for
// it.
//
//==========================================================================
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
FSoundChan *FMODSoundRenderer::CommonChannelSetup(FMOD::Channel *chan, FSoundChan *reuse_chan) const
{
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
FSoundChan *schan;
if (reuse_chan != NULL)
{
schan = reuse_chan;
schan->ChanFlags &= ~CHAN_EVICTED;
schan->SysChannel = chan;
}
else
{
schan = S_GetChannel(chan);
chan->getDelay(FMOD_DELAYTYPE_DSPCLOCK_START, &schan->StartTime.Hi, &schan->StartTime.Lo);
}
chan->setUserData(schan);
chan->setCallback(FMOD_CHANNEL_CALLBACKTYPE_END, ChannelEndCallback, 0);
GSfxInfo = NULL;
return schan;
}
//==========================================================================
//
// FMODSoundRenderer :: StopSound
//
//==========================================================================
void FMODSoundRenderer::StopSound(FSoundChan *chan)
{
if (chan == NULL)
return;
if (chan->SysChannel != NULL)
{
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
// S_EvictAllChannels() will set the CHAN_EVICTED flag to indicate
// that it wants to keep all the channel information around.
if (!(chan->ChanFlags & CHAN_EVICTED))
{
chan->ChanFlags |= CHAN_FORGETTABLE;
}
((FMOD::Channel *)chan->SysChannel)->stop();
}
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
else
{
S_ReturnChannel(chan);
}
}
//==========================================================================
//
// FMODSoundRenderer :: GetPosition
//
// Returns position of sound on this channel, in samples.
//
//==========================================================================
unsigned int FMODSoundRenderer::GetPosition(FSoundChan *chan)
{
unsigned int pos;
if (chan == NULL || chan->SysChannel == NULL)
{
return 0;
}
((FMOD::Channel *)chan->SysChannel)->getPosition(&pos, FMOD_TIMEUNIT_PCM);
return pos;
}
//==========================================================================
//
// FMODSoundRenderer :: SetSfxPaused
//
//==========================================================================
void FMODSoundRenderer::SetSfxPaused(bool paused, int slot)
{
int oldslots = SFXPaused;
if (paused)
{
SFXPaused |= 1 << slot;
}
else
{
SFXPaused &= ~(1 << slot);
}
Printf("%d\n", SFXPaused);
if (oldslots != 0 && SFXPaused == 0)
{
PausableSfx->setPaused(false);
}
else if (oldslots == 0 && SFXPaused != 0)
{
PausableSfx->setPaused(true);
}
}
//==========================================================================
//
// FMODSoundRenderer :: SetInactive
//
// This is similar to SetSfxPaused but will *pause* everything, including
// the global reverb effect. This is meant to be used only when the
// game is deactivated, not for general sound pausing.
//
//==========================================================================
void FMODSoundRenderer::SetInactive(bool inactive)
{
if (ChannelGroupTargetUnit != NULL)
{
ChannelGroupTargetUnit->setActive(!inactive);
}
}
//==========================================================================
//
// FMODSoundRenderer :: UpdateSoundParams3D
//
//==========================================================================
void FMODSoundRenderer::UpdateSoundParams3D(FSoundChan *chan, const FVector3 &pos, const FVector3 &vel)
{
if (chan == NULL || chan->SysChannel == NULL)
return;
FMOD::Channel *fchan = (FMOD::Channel *)chan->SysChannel;
FMOD_MODE oldmode, mode;
if (fchan->getMode(&oldmode) != FMOD_OK)
{
oldmode = FMOD_3D | FMOD_SOFTWARE;
}
mode = SetChanHeadSettings(fchan, chan->SfxInfo, pos, chan->EntChannel, chan->ChanFlags, chan->Sector, oldmode);
if (mode != oldmode)
{ // Only set the mode if it changed.
fchan->setMode(mode);
}
fchan->set3DAttributes((FMOD_VECTOR *)&pos[0], (FMOD_VECTOR *)&vel[0]);
}
//==========================================================================
//
// FMODSoundRenderer :: UpdateListener
//
//==========================================================================
void FMODSoundRenderer::UpdateListener()
{
AActor *listener = players[consoleplayer].camera;
float angle;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_VECTOR pos, vel;
FMOD_VECTOR forward;
FMOD_VECTOR up;
if (listener == NULL)
{
return;
}
// Set velocity to 0 to prevent crazy doppler shifts just from running.
vel.x = 0;//listener->momx * (TICRATE/65536.f);
vel.y = 0;//listener->momz * (TICRATE/65536.f);
vel.z = 0;//listener->momy * (TICRATE/65536.f);
pos.x = listener->x / 65536.f;
pos.y = listener->z / 65536.f;
pos.z = listener->y / 65536.f;
angle = (float)(listener->angle) * ((float)PI / 2147483648.f);
forward.x = cosf(angle);
forward.y = 0;
forward.z = sinf(angle);
up.x = 0;
up.y = 1;
up.z = 0;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->set3DListenerAttributes(0, &pos, &vel, &forward, &up);
bool underwater = false;
const ReverbContainer *env;
if (ForcedEnvironment)
{
env = ForcedEnvironment;
}
else
{
underwater = (listener->waterlevel == 3 && snd_waterlp);
assert (zones != NULL);
env = zones[listener->Sector->ZoneNumber].Environment;
if (env == NULL)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{
env = DefaultEnvironments[0];
}
}
if (env != PrevEnvironment || env->Modified)
{
DPrintf ("Reverb Environment %s\n", env->Name);
const_cast<ReverbContainer*>(env)->Modified = false;
Sys->setReverbProperties((FMOD_REVERB_PROPERTIES *)(&env->Properties));
PrevEnvironment = env;
}
if (underwater || env->SoftwareWater)
{
//PausableSfx->setPitch(0.64171f); // This appears to be what Duke 3D uses
PausableSfx->setPitch(0.7937005f); // Approx. 4 semitones lower; what Nash suggesetd
if (WaterLP != NULL)
{
if (LastWaterLP != snd_waterlp)
{
LastWaterLP = snd_waterlp;
WaterLP->setParameter(FMOD_DSP_LOWPASS_CUTOFF, snd_waterlp);
}
WaterLP->setActive(true);
if (WaterReverb != NULL && snd_waterreverb)
{
WaterReverb->setActive(true);
WaterReverb->setBypass(false);
SfxConnection->setMix(0);
}
else
{
// Let some of the original mix through so that high frequencies are
// not completely lost. The reverb unit has its own connection and
// preserves dry sounds itself if used.
SfxConnection->setMix(0.1f);
if (WaterReverb != NULL)
{
WaterReverb->setActive(true);
WaterReverb->setBypass(true);
}
}
}
}
else
{
PausableSfx->setPitch(1);
if (WaterLP != NULL)
{
SfxConnection->setMix(1);
WaterLP->setActive(false);
if (WaterReverb != NULL)
{
WaterReverb->setActive(false);
}
}
}
}
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
//==========================================================================
//
// FMODSoundRenderer :: Sync
//
// Used by the save/load code to restart sounds at the same position they
// were in at the time of saving. Must not be nested.
//
//==========================================================================
void FMODSoundRenderer::Sync(bool sync)
{
DSPLocked = sync;
if (sync)
{
Sys->lockDSP();
Sys->getDSPClock(&DSPClock.Hi, &DSPClock.Lo);
}
else
{
Sys->unlockDSP();
}
}
//==========================================================================
//
// FMODSoundRenderer :: UpdateSounds
//
//==========================================================================
void FMODSoundRenderer::UpdateSounds()
{
// Any sounds played between now and the next call to this function
// will start exactly one tic from now.
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
Sys->getDSPClock(&DSPClock.Hi, &DSPClock.Lo);
DSPClock.AsOne += OutputRate / TICRATE;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->update();
}
//==========================================================================
//
// FMODSoundRenderer :: LoadSound
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::LoadSound(sfxinfo_t *sfx)
{
if (sfx->data == NULL)
{
DPrintf("Loading sound \"%s\" (%td)\n", sfx->name.GetChars(), sfx - &S_sfx[0]);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
getsfx(sfx);
}
}
//==========================================================================
//
// FMODSoundRenderer :: UnloadSound
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::UnloadSound(sfxinfo_t *sfx)
{
if (sfx->data != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
((FMOD::Sound *)sfx->data)->release();
sfx->data = NULL;
DPrintf("Unloaded sound \"%s\" (%td)\n", sfx->name.GetChars(), sfx - &S_sfx[0]);
}
}
//==========================================================================
//
// FMODSoundRenderer :: GetMSLength
//
//==========================================================================
unsigned int FMODSoundRenderer::GetMSLength(sfxinfo_t *sfx)
{
if (sfx->data == NULL)
{
LoadSound(sfx);
}
if (sfx->data != NULL)
{
unsigned int length;
if (((FMOD::Sound *)sfx->data)->getLength(&length, FMOD_TIMEUNIT_MS) == FMOD_OK)
{
return length;
}
}
return 0; // Don't know.
}
//==========================================================================
//
// FMODSoundRenderer :: DoLoad
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::DoLoad(void **slot, sfxinfo_t *sfx)
{
BYTE *sfxdata;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
BYTE *sfxstart;
int size;
int errcount;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMOD_MODE samplemode;
FMOD_CREATESOUNDEXINFO exinfo = { sizeof(exinfo), };
FMOD::Sound *sample;
int rolloff;
float mindist, maxdist;
samplemode = FMOD_3D | FMOD_OPENMEMORY | FMOD_SOFTWARE;
if (sfx->MaxDistance == 0)
{
mindist = S_MinDistance;
maxdist = S_MaxDistanceOrRolloffFactor;
rolloff = S_RolloffType;
}
else
{
mindist = sfx->MinDistance;
maxdist = sfx->MaxDistance;
rolloff = sfx->RolloffType;
}
sfxdata = NULL;
errcount = 0;
while (errcount < 2)
{
if (sfxdata != NULL)
{
delete[] sfxdata;
sfxdata = NULL;
}
if (errcount)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
sfx->lumpnum = Wads.GetNumForName("dsempty", ns_sounds);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
size = Wads.LumpLength(sfx->lumpnum);
if (size == 0)
{
errcount++;
continue;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FWadLump wlump = Wads.OpenLumpNum(sfx->lumpnum);
sfxstart = sfxdata = new BYTE[size];
wlump.Read(sfxdata, size);
SDWORD len = ((SDWORD *)sfxdata)[1];
// If the sound is raw, just load it as such.
// Otherwise, try the sound as DMX format.
// If that fails, let FMOD try and figure it out.
if (sfx->bLoadRAW ||
(((BYTE *)sfxdata)[0] == 3 && ((BYTE *)sfxdata)[1] == 0 && len <= size - 8))
{
int frequency;
if (sfx->bLoadRAW)
{
len = Wads.LumpLength (sfx->lumpnum);
frequency = (sfx->bForce22050 ? 22050 : 11025);
}
else
{
frequency = ((WORD *)sfxdata)[1];
if (frequency == 0)
{
frequency = 11025;
}
sfxstart = sfxdata + 8;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
exinfo.length = len;
exinfo.numchannels = 1;
exinfo.defaultfrequency = frequency;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
exinfo.format = FMOD_SOUND_FORMAT_PCM8;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
samplemode |= FMOD_OPENRAW;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Need to convert sample data from unsigned to signed.
for (int i = 0; i < len; ++i)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
sfxstart[i] = sfxstart[i] - 128;
}
}
else
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
exinfo.length = size;
}
result = Sys->createSound((char *)sfxstart, samplemode, &exinfo, &sample);
if (result != FMOD_OK)
{
DPrintf("Failed to allocate sample: Error %d\n", result);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
errcount++;
continue;
}
*slot = sample;
break;
}
if (sample != NULL)
{
if (rolloff == ROLLOFF_Log)
{
maxdist = 10000.f;
}
sample->set3DMinMaxDistance(mindist, maxdist);
sample->setUserData(sfx);
}
if (sfxdata != NULL)
{
delete[] sfxdata;
}
}
//==========================================================================
//
// FMODSoundRenderer :: getsfx
//
// Get the sound data from the WAD and register it with sound library
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::getsfx(sfxinfo_t *sfx)
{
unsigned int i;
// If the sound doesn't exist, replace it with the empty sound.
if (sfx->lumpnum == -1)
{
sfx->lumpnum = Wads.GetNumForName("dsempty", ns_sounds);
}
// See if there is another sound already initialized with this lump. If so,
// then set this one up as a link, and don't load the sound again.
for (i = 0; i < S_sfx.Size(); i++)
{
if (S_sfx[i].data && S_sfx[i].link == sfxinfo_t::NO_LINK && S_sfx[i].lumpnum == sfx->lumpnum)
{
DPrintf ("Linked to %s (%d)\n", S_sfx[i].name.GetChars(), i);
sfx->link = i;
return;
}
}
DoLoad(&sfx->data, sfx);
}
//==========================================================================
//
// FMODSoundRenderer :: ChannelEndCallback static
//
// Called when the channel finishes playing.
//
//==========================================================================
FMOD_RESULT F_CALLBACK FMODSoundRenderer::ChannelEndCallback
(FMOD_CHANNEL *channel, FMOD_CHANNEL_CALLBACKTYPE type,
int cmd, unsigned int data1, unsigned int data2)
{
assert(type == FMOD_CHANNEL_CALLBACKTYPE_END);
FMOD::Channel *chan = (FMOD::Channel *)channel;
FSoundChan *schan;
if (chan->getUserData((void **)&schan) == FMOD_OK && schan != NULL)
{
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
bool evicted;
// If the sound was stopped with GSnd->StopSound(), then we know
// it wasn't evicted. Otherwise, if it's looping, it must have
// been evicted. If it's not looping, then it was evicted if it
// didn't reach the end of its playback.
if (schan->ChanFlags & CHAN_FORGETTABLE)
{
evicted = false;
}
else if (schan->ChanFlags & (CHAN_LOOP | CHAN_EVICTED))
{
evicted = true;
}
else
{
FMOD::Sound *sound;
unsigned int len, pos;
evicted = false; // Assume not evicted
if (FMOD_OK == chan->getPosition(&pos, FMOD_TIMEUNIT_PCM))
{
// If position is 0, then this sound either didn't have
// a chance to play at all, or it stopped normally.
if (pos == 0)
{
if (schan->ChanFlags & CHAN_JUSTSTARTED)
{
evicted = true;
}
}
else if (FMOD_OK == chan->getCurrentSound(&sound))
{
if (FMOD_OK == sound->getLength(&len, FMOD_TIMEUNIT_PCM))
{
if (pos < len)
{
evicted = true;
}
}
}
}
}
if (!evicted)
{
S_ReturnChannel(schan);
}
else
{
schan->ChanFlags |= CHAN_EVICTED;
schan->SysChannel = NULL;
}
}
return FMOD_OK;
}
//==========================================================================
//
// FMODSoundRenderer :: RolloffCallback static
//
// Calculates a volume for the sound based on distance.
//
//==========================================================================
float F_CALLBACK FMODSoundRenderer::RolloffCallback(FMOD_CHANNEL *channel, float distance)
{
FMOD::Channel *chan = (FMOD::Channel *)channel;
FSoundChan *schan;
// Defaults for Doom.
int type = ROLLOFF_Doom;
sfxinfo_t *sfx;
float min;
float max;
float factor;
float volume;
type = S_RolloffType;
factor = S_MaxDistanceOrRolloffFactor;
min = S_MinDistance;
max = S_MaxDistanceOrRolloffFactor;
if (GSfxInfo != NULL)
{
sfx = GSfxInfo;
distance *= GDistScale;
}
else if (chan->getUserData((void **)&schan) == FMOD_OK && schan != NULL)
{
sfx = schan->SfxInfo;
distance *= schan->DistanceScale;
}
else
{
return 0;
}
if (sfx == NULL)
{
return 0;
}
if (sfx->MaxDistance == 0)
{
type = sfx->RolloffType;
factor = sfx->RolloffFactor;
}
chan->get3DMinMaxDistance(&min, &max);
if (distance <= min)
{
return 1;
}
if (type == ROLLOFF_Log)
{ // Logarithmic rolloff has no max distance where it goes silent.
return min / (min + factor * (distance - min));
}
if (distance >= max)
{
return 0;
}
volume = (max - distance) / (max - min);
if (type == ROLLOFF_Custom && S_SoundCurve != NULL)
{
volume = S_SoundCurve[int(S_SoundCurveSize * (1 - volume))] / 127.f;
}
if (type == ROLLOFF_Linear)
{
return volume;
}
else
{
return (powf(10.f, volume) - 1.f) / 9.f;
}
}
//==========================================================================
//
// FMODSoundRenderer :: DrawWaveDebug
//
// Bit 0: ( 1) Show oscilloscope for sfx.
// Bit 1: ( 2) Show spectrum for sfx.
// Bit 2: ( 4) Show oscilloscope for music.
// Bit 3: ( 8) Show spectrum for music.
// Bit 4: (16) Show oscilloscope for all sounds.
// Bit 5: (32) Show spectrum for all sounds.
//
//==========================================================================
void FMODSoundRenderer::DrawWaveDebug(int mode)
{
const int window_height = 100;
float wavearray[MAXWIDTH];
int window_size;
int numoutchans;
int y;
if (FMOD_OK != Sys->getSoftwareFormat(NULL, NULL, &numoutchans, NULL, NULL, NULL))
{
return;
}
// Scale all the channel windows so one group fits completely on one row, with
// 16 pixels of padding between each window.
window_size = (screen->GetWidth() - 16) / numoutchans - 16;
y = 16;
y = DrawChannelGroupOutput(SfxGroup, wavearray, window_size, window_height, y, mode);
y = DrawChannelGroupOutput(MusicGroup, wavearray, window_size, window_height, y, mode >> 2);
y = DrawSystemOutput(wavearray, window_size, window_height, y, mode >> 4);
}
//==========================================================================
//
// FMODSoundRenderer :: DrawChannelGroupOutput
//
// Draws an oscilloscope and/or a spectrum for a channel group.
//
//==========================================================================
int FMODSoundRenderer::DrawChannelGroupOutput(FMOD::ChannelGroup *group, float *wavearray, int width, int height, int y, int mode)
{
int y1, y2;
switch (mode & 0x03)
{
case 0x01: // Oscilloscope only
return DrawChannelGroupWaveData(group, wavearray, width, height, y, false);
case 0x02: // Spectrum only
return DrawChannelGroupSpectrum(group, wavearray, width, height, y, false);
case 0x03: // Oscilloscope + Spectrum
width = (width + 16) / 2 - 16;
y1 = DrawChannelGroupSpectrum(group, wavearray, width, height, y, true);
y2 = DrawChannelGroupWaveData(group, wavearray, width, height, y, true);
return MAX(y1, y2);
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer :: DrawSystemOutput
//
// Like DrawChannelGroupOutput(), but uses the system object.
//
//==========================================================================
int FMODSoundRenderer::DrawSystemOutput(float *wavearray, int width, int height, int y, int mode)
{
int y1, y2;
switch (mode & 0x03)
{
case 0x01: // Oscilloscope only
return DrawSystemWaveData(wavearray, width, height, y, false);
case 0x02: // Spectrum only
return DrawSystemSpectrum(wavearray, width, height, y, false);
case 0x03: // Oscilloscope + Spectrum
width = (width + 16) / 2 - 16;
y1 = DrawSystemSpectrum(wavearray, width, height, y, true);
y2 = DrawSystemWaveData(wavearray, width, height, y, true);
return MAX(y1, y2);
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer :: DrawChannelGroupWaveData
//
// Draws all the output channels for a specified channel group.
// Setting skip to true causes it to skip every other window.
//
//==========================================================================
int FMODSoundRenderer::DrawChannelGroupWaveData(FMOD::ChannelGroup *group, float *wavearray, int width, int height, int y, bool skip)
{
int drawn = 0;
int x = 16;
while (FMOD_OK == group->getWaveData(wavearray, width, drawn))
{
drawn++;
DrawWave(wavearray, x, y, width, height);
x += (width + 16) << int(skip);
}
if (drawn)
{
y += height + 16;
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer::DrawSystemWaveData
//
// Like DrawChannelGroupWaveData, but it uses the system object to get the
// complete output.
//
//==========================================================================
int FMODSoundRenderer::DrawSystemWaveData(float *wavearray, int width, int height, int y, bool skip)
{
int drawn = 0;
int x = 16;
while (FMOD_OK == Sys->getWaveData(wavearray, width, drawn))
{
drawn++;
DrawWave(wavearray, x, y, width, height);
x += (width + 16) << int(skip);
}
if (drawn)
{
y += height + 16;
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer :: DrawWave
//
// Draws an oscilloscope at the specified coordinates on the screen. Each
// entry in the wavearray buffer has its own column. IOW, there are <width>
// entries in wavearray.
//
//==========================================================================
void FMODSoundRenderer::DrawWave(float *wavearray, int x, int y, int width, int height)
{
float scale = height / 2.f;
float mid = y + scale;
int i;
// Draw a box around the oscilloscope.
screen->DrawLine(x - 1, y - 1, x + width, y - 1, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x + width + 1, y - 1, x + width, y + height, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x + width, y + height, x - 1, y + height, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x - 1, y + height, x - 1, y - 1, -1, MAKEARGB(160, 0, 40, 200));
// Draw the actual oscilloscope.
if (screen->Accel2D)
{ // Drawing this with lines is super-slow without hardware acceleration, at least with
// the debug build.
float lasty = mid - wavearray[0] * scale;
float newy;
for (i = 1; i < width; ++i)
{
newy = mid - wavearray[i] * scale;
screen->DrawLine(x + i - 1, int(lasty), x + i, int(newy), -1, MAKEARGB(255,255,248,248));
lasty = newy;
}
}
else
{
for (i = 0; i < width; ++i)
{
float y = wavearray[i] * scale + mid;
screen->DrawPixel(x + i, int(y), -1, MAKEARGB(255,255,255,255));
}
}
}
//==========================================================================
//
// FMODSoundRenderer :: DrawChannelGroupSpectrum
//
// Draws all the spectrum for a specified channel group.
// Setting skip to true causes it to skip every other window, starting at
// the second one.
//
//==========================================================================
int FMODSoundRenderer::DrawChannelGroupSpectrum(FMOD::ChannelGroup *group, float *spectrumarray, int width, int height, int y, bool skip)
{
int drawn = 0;
int x = 16;
if (skip)
{
x += width + 16;
}
while (FMOD_OK == group->getSpectrum(spectrumarray, SPECTRUM_SIZE, drawn, FMOD_DSP_FFT_WINDOW_TRIANGLE))
{
drawn++;
DrawSpectrum(spectrumarray, x, y, width, height);
x += (width + 16) << int(skip);
}
if (drawn)
{
y += height + 16;
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer::DrawSystemSpectrum
//
// Like DrawChannelGroupSpectrum, but it uses the system object to get the
// complete output.
//
//==========================================================================
int FMODSoundRenderer::DrawSystemSpectrum(float *spectrumarray, int width, int height, int y, bool skip)
{
int drawn = 0;
int x = 16;
if (skip)
{
x += width + 16;
}
while (FMOD_OK == Sys->getSpectrum(spectrumarray, SPECTRUM_SIZE, drawn, FMOD_DSP_FFT_WINDOW_TRIANGLE))
{
drawn++;
DrawSpectrum(spectrumarray, x, y, width, height);
x += (width + 16) << int(skip);
}
if (drawn)
{
y += height + 16;
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer :: DrawSpectrum
//
// Draws a spectrum at the specified coordinates on the screen.
//
//==========================================================================
void FMODSoundRenderer::DrawSpectrum(float *spectrumarray, int x, int y, int width, int height)
{
float scale = height / 2.f;
float mid = y + scale;
float db;
int top;
// Draw a border and dark background for the spectrum.
screen->DrawLine(x - 1, y - 1, x + width, y - 1, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x + width + 1, y - 1, x + width, y + height, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x + width, y + height, x - 1, y + height, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x - 1, y + height, x - 1, y - 1, -1, MAKEARGB(160, 0, 40, 200));
screen->Dim(MAKERGB(0,0,0), 0.3f, x, y, width, height);
// Draw the actual spectrum.
for (int i = 0; i < width; ++i)
{
db = spectrumarray[i * (SPECTRUM_SIZE - 2) / width + 1];
db = MAX(-150.f, 10 * log10f(db) * 2); // Convert to decibels and clamp
db = 1.f - (db / -150.f);
db *= height;
top = (int)db;
if (top >= height)
{
top = height - 1;
}
// screen->Clear(x + i, int(y + height - db), x + i + 1, y + height, -1, MAKEARGB(255, 255, 255, 40));
screen->Dim(MAKERGB(255,255,40), 0.65f, x + i, y + height - top, 1, top);
}
}
//==========================================================================
//
// FMODSoundRenderer :: DecodeSample
//
// Uses FMOD to decode a compressed sample to a 16-bit buffer. This is used
// by the DUMB XM reader to handle FMOD's OggMods.
//
//==========================================================================
short *FMODSoundRenderer::DecodeSample(int outlen, const void *coded, int sizebytes, ECodecType type)
{
FMOD_CREATESOUNDEXINFO exinfo = { sizeof(exinfo), };
FMOD::Sound *sound;
FMOD_SOUND_FORMAT format;
int channels;
unsigned int len, amt_read;
FMOD_RESULT result;
short *outbuf;
if (type == CODEC_Vorbis)
{
exinfo.suggestedsoundtype = FMOD_SOUND_TYPE_OGGVORBIS;
}
exinfo.length = sizebytes;
result = Sys->createSound((const char *)coded,
FMOD_2D | FMOD_SOFTWARE | FMOD_CREATESTREAM |
FMOD_OPENMEMORY_POINT | FMOD_OPENONLY | FMOD_LOWMEM,
&exinfo, &sound);
if (result != FMOD_OK)
{
return NULL;
}
result = sound->getFormat(NULL, &format, &channels, NULL);
// TODO: Handle more formats if it proves necessary.
// Does OggMod work with stereo samples?
if (result != FMOD_OK || format != FMOD_SOUND_FORMAT_PCM16 || channels != 1)
{
sound->release();
return NULL;
}
len = outlen;
// Must be malloc'ed for DUMB, which is C.
outbuf = (short *)malloc(len);
result = sound->readData(outbuf, len, &amt_read);
sound->release();
if (result == FMOD_ERR_FILE_EOF)
{
memset((BYTE *)outbuf + amt_read, 0, len - amt_read);
}
else if (result != FMOD_OK || amt_read != len)
{
free(outbuf);
return NULL;
}
return outbuf;
}