gzdoom/jpeg-6b/jdmainct.c

/*
* jdmainct.c
*
* Copyright (C) 1994-1996, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains the main buffer controller for decompression.
* The main buffer lies between the JPEG decompressor proper and the
* post-processor; it holds downsampled data in the JPEG colorspace.
*
* Note that this code is bypassed in raw-data mode, since the application
* supplies the equivalent of the main buffer in that case.
*/

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"


/*
* In the current system design, the main buffer need never be a full-image
* buffer; any full-height buffers will be found inside the coefficient or
* postprocessing controllers.  Nonetheless, the main controller is not
* trivial.  Its responsibility is to provide context rows for upsampling/
* rescaling, and doing this in an efficient fashion is a bit tricky.
*
* Postprocessor input data is counted in "row groups".  A row group
* is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
* sample rows of each component.  (We require DCT_scaled_size values to be
* chosen such that these numbers are integers.  In practice DCT_scaled_size
* values will likely be powers of two, so we actually have the stronger
* condition that DCT_scaled_size / min_DCT_scaled_size is an integer.)
* Upsampling will typically produce max_v_samp_factor pixel rows from each
* row group (times any additional scale factor that the upsampler is
* applying).
*
* The coefficient controller will deliver data to us one iMCU row at a time;
* each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or
* exactly min_DCT_scaled_size row groups.  (This amount of data corresponds
* to one row of MCUs when the image is fully interleaved.)  Note that the
* number of sample rows varies across components, but the number of row
* groups does not.  Some garbage sample rows may be included in the last iMCU
* row at the bottom of the image.
*
* Depending on the vertical scaling algorithm used, the upsampler may need
* access to the sample row(s) above and below its current input row group.
* The upsampler is required to set need_context_rows TRUE at global selection
* time if so.  When need_context_rows is FALSE, this controller can simply
* obtain one iMCU row at a time from the coefficient controller and dole it
* out as row groups to the postprocessor.
*
* When need_context_rows is TRUE, this controller guarantees that the buffer
* passed to postprocessing contains at least one row group's worth of samples
* above and below the row group(s) being processed.  Note that the context
* rows "above" the first passed row group appear at negative row offsets in
* the passed buffer.  At the top and bottom of the image, the required
* context rows are manufactured by duplicating the first or last real sample
* row; this avoids having special cases in the upsampling inner loops.
*
* The amount of context is fixed at one row group just because that's a
* convenient number for this controller to work with.  The existing
* upsamplers really only need one sample row of context.  An upsampler
* supporting arbitrary output rescaling might wish for more than one row
* group of context when shrinking the image; tough, we don't handle that.
* (This is justified by the assumption that downsizing will be handled mostly
* by adjusting the DCT_scaled_size values, so that the actual scale factor at
* the upsample step needn't be much less than one.)
*
* To provide the desired context, we have to retain the last two row groups
* of one iMCU row while reading in the next iMCU row.  (The last row group
* can't be processed until we have another row group for its below-context,
* and so we have to save the next-to-last group too for its above-context.)
* We could do this most simply by copying data around in our buffer, but
* that'd be very slow.  We can avoid copying any data by creating a rather
* strange pointer structure.  Here's how it works.  We allocate a workspace
* consisting of M+2 row groups (where M = min_DCT_scaled_size is the number
* of row groups per iMCU row).  We create two sets of redundant pointers to
* the workspace.  Labeling the physical row groups 0 to M+1, the synthesized
* pointer lists look like this:
*                   M+1                          M-1
* master pointer --> 0         master pointer --> 0
*                    1                            1
*                   ...                          ...
*                   M-3                          M-3
*                   M-2                           M
*                   M-1                          M+1
*                    M                           M-2
*                   M+1                          M-1
*                    0                            0
* We read alternate iMCU rows using each master pointer; thus the last two
* row groups of the previous iMCU row remain un-overwritten in the workspace.
* The pointer lists are set up so that the required context rows appear to
* be adjacent to the proper places when we pass the pointer lists to the
* upsampler.
*
* The above pictures describe the normal state of the pointer lists.
* At top and bottom of the image, we diddle the pointer lists to duplicate
* the first or last sample row as necessary (this is cheaper than copying
* sample rows around).
*
* This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1.  In that
* situation each iMCU row provides only one row group so the buffering logic
* must be different (eg, we must read two iMCU rows before we can emit the
* first row group).  For now, we simply do not support providing context
* rows when min_DCT_scaled_size is 1.  That combination seems unlikely to
* be worth providing --- if someone wants a 1/8th-size preview, they probably
* want it quick and dirty, so a context-free upsampler is sufficient.
*/


/* Private buffer controller object */

typedef struct {
	struct jpeg_d_main_controller pub; /* public fields */

	/* Pointer to allocated workspace (M or M+2 row groups). */
	JSAMPARRAY buffer[MAX_COMPONENTS];

	boolean buffer_full;		/* Have we gotten an iMCU row from decoder? */
	JDIMENSION rowgroup_ctr;	/* counts row groups output to postprocessor */

	/* Remaining fields are only used in the context case. */

	/* These are the master pointers to the funny-order pointer lists. */
	JSAMPIMAGE xbuffer[2];	/* pointers to weird pointer lists */

	int whichptr;			/* indicates which pointer set is now in use */
	int context_state;		/* process_data state machine status */
	JDIMENSION rowgroups_avail;	/* row groups available to postprocessor */
	JDIMENSION iMCU_row_ctr;	/* counts iMCU rows to detect image top/bot */
} my_main_controller;

typedef my_main_controller * my_main_ptr;

/* context_state values: */
#define CTX_PREPARE_FOR_IMCU	0	/* need to prepare for MCU row */
#define CTX_PROCESS_IMCU	1	/* feeding iMCU to postprocessor */
#define CTX_POSTPONED_ROW	2	/* feeding postponed row group */


/* Forward declarations */
METHODDEF(void) process_data_simple_main
JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
	JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));
METHODDEF(void) process_data_context_main
JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf,
	JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail));


LOCAL(void)
alloc_funny_pointers (j_decompress_ptr cinfo)
/* Allocate space for the funny pointer lists.
* This is done only once, not once per pass.
*/
{
	my_main_ptr mymain = (my_main_ptr) cinfo->main;
	int ci, rgroup;
	int M = cinfo->min_DCT_scaled_size;
	jpeg_component_info *compptr;
	JSAMPARRAY xbuf;

	/* Get top-level space for component array pointers.
	* We alloc both arrays with one call to save a few cycles.
	*/
	mymain->xbuffer[0] = (JSAMPIMAGE)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		cinfo->num_components * 2 * SIZEOF(JSAMPARRAY));
	mymain->xbuffer[1] = mymain->xbuffer[0] + cinfo->num_components;

	for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
		ci++, compptr++) {
			rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
				cinfo->min_DCT_scaled_size; /* height of a row group of component */
			/* Get space for pointer lists --- M+4 row groups in each list.
			* We alloc both pointer lists with one call to save a few cycles.
			*/
			xbuf = (JSAMPARRAY)
				(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
				2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW));
			xbuf += rgroup;		/* want one row group at negative offsets */
			mymain->xbuffer[0][ci] = xbuf;
			xbuf += rgroup * (M + 4);
			mymain->xbuffer[1][ci] = xbuf;
	}
}


LOCAL(void)
make_funny_pointers (j_decompress_ptr cinfo)
/* Create the funny pointer lists discussed in the comments above.
* The actual workspace is already allocated (in main->buffer),
* and the space for the pointer lists is allocated too.
* This routine just fills in the curiously ordered lists.
* This will be repeated at the beginning of each pass.
*/
{
	my_main_ptr mymain = (my_main_ptr) cinfo->main;
	int ci, i, rgroup;
	int M = cinfo->min_DCT_scaled_size;
	jpeg_component_info *compptr;
	JSAMPARRAY buf, xbuf0, xbuf1;

	for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
		ci++, compptr++) {
			rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
				cinfo->min_DCT_scaled_size; /* height of a row group of component */
			xbuf0 = mymain->xbuffer[0][ci];
			xbuf1 = mymain->xbuffer[1][ci];
			/* First copy the workspace pointers as-is */
			buf = mymain->buffer[ci];
			for (i = 0; i < rgroup * (M + 2); i++) {
				xbuf0[i] = xbuf1[i] = buf[i];
			}
			/* In the second list, put the last four row groups in swapped order */
			for (i = 0; i < rgroup * 2; i++) {
				xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i];
				xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i];
			}
			/* The wraparound pointers at top and bottom will be filled later
			* (see set_wraparound_pointers, below).  Initially we want the "above"
			* pointers to duplicate the first actual data line.  This only needs
			* to happen in xbuffer[0].
			*/
			for (i = 0; i < rgroup; i++) {
				xbuf0[i - rgroup] = xbuf0[0];
			}
	}
}


LOCAL(void)
set_wraparound_pointers (j_decompress_ptr cinfo)
/* Set up the "wraparound" pointers at top and bottom of the pointer lists.
* This changes the pointer list state from top-of-image to the normal state.
*/
{
	my_main_ptr mymain = (my_main_ptr) cinfo->main;
	int ci, i, rgroup;
	int M = cinfo->min_DCT_scaled_size;
	jpeg_component_info *compptr;
	JSAMPARRAY xbuf0, xbuf1;

	for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
		ci++, compptr++) {
			rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
				cinfo->min_DCT_scaled_size; /* height of a row group of component */
			xbuf0 = mymain->xbuffer[0][ci];
			xbuf1 = mymain->xbuffer[1][ci];
			for (i = 0; i < rgroup; i++) {
				xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i];
				xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i];
				xbuf0[rgroup*(M+2) + i] = xbuf0[i];
				xbuf1[rgroup*(M+2) + i] = xbuf1[i];
			}
	}
}


LOCAL(void)
set_bottom_pointers (j_decompress_ptr cinfo)
/* Change the pointer lists to duplicate the last sample row at the bottom
* of the image.  whichptr indicates which xbuffer holds the final iMCU row.
* Also sets rowgroups_avail to indicate number of nondummy row groups in row.
*/
{
	my_main_ptr mymain = (my_main_ptr) cinfo->main;
	int ci, i, rgroup, iMCUheight, rows_left;
	jpeg_component_info *compptr;
	JSAMPARRAY xbuf;

	for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
		ci++, compptr++) {
			/* Count sample rows in one iMCU row and in one row group */
			iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size;
			rgroup = iMCUheight / cinfo->min_DCT_scaled_size;
			/* Count nondummy sample rows remaining for this component */
			rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight);
			if (rows_left == 0) rows_left = iMCUheight;
			/* Count nondummy row groups.  Should get same answer for each component,
			* so we need only do it once.
			*/
			if (ci == 0) {
				mymain->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1);
			}
			/* Duplicate the last real sample row rgroup*2 times; this pads out the
			* last partial rowgroup and ensures at least one full rowgroup of context.
			*/
			xbuf = mymain->xbuffer[mymain->whichptr][ci];
			for (i = 0; i < rgroup * 2; i++) {
				xbuf[rows_left + i] = xbuf[rows_left-1];
			}
	}
}


/*
* Initialize for a processing pass.
*/

METHODDEF(void)
start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
{
	my_main_ptr mymain = (my_main_ptr) cinfo->main;

	switch (pass_mode) {
	case JBUF_PASS_THRU:
	  if (cinfo->upsample->need_context_rows) {
		  mymain->pub.process_data = process_data_context_main;
		  make_funny_pointers(cinfo); /* Create the xbuffer[] lists */
		  mymain->whichptr = 0;	/* Read first iMCU row into xbuffer[0] */
		  mymain->context_state = CTX_PREPARE_FOR_IMCU;
		  mymain->iMCU_row_ctr = 0;
	  } else {
		  /* Simple case with no context needed */
		  mymain->pub.process_data = process_data_simple_main;
	  }
	  mymain->buffer_full = FALSE;	/* Mark buffer empty */
	  mymain->rowgroup_ctr = 0;
	  break;
	default:
	  ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
	  break;
	}
}


/*
* Process some data.
* This handles the simple case where no context is required.
*/

METHODDEF(void)
process_data_simple_main (j_decompress_ptr cinfo,
						  JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
						  JDIMENSION out_rows_avail)
{
	my_main_ptr mymain = (my_main_ptr) cinfo->main;
	JDIMENSION rowgroups_avail;

	/* Read input data if we haven't filled the main buffer yet */
	if (! mymain->buffer_full) {
		if (! (*cinfo->coef->decompress_data) (cinfo, mymain->buffer))
			return;			/* suspension forced, can do nothing more */
		mymain->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
	}

	/* There are always min_DCT_scaled_size row groups in an iMCU row. */
	rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size;
	/* Note: at the bottom of the image, we may pass extra garbage row groups
	* to the postprocessor.  The postprocessor has to check for bottom
	* of image anyway (at row resolution), so no point in us doing it too.
	*/

	/* Feed the postprocessor */
	(*cinfo->post->post_process_data) (cinfo, mymain->buffer,
		&mymain->rowgroup_ctr, rowgroups_avail,
		output_buf, out_row_ctr, out_rows_avail);

	/* Has postprocessor consumed all the data yet? If so, mark buffer empty */
	if (mymain->rowgroup_ctr >= rowgroups_avail) {
		mymain->buffer_full = FALSE;
		mymain->rowgroup_ctr = 0;
	}
}


/*
* Process some data.
* This handles the case where context rows must be provided.
*/

METHODDEF(void)
process_data_context_main (j_decompress_ptr cinfo,
						   JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
						   JDIMENSION out_rows_avail)
{
	my_main_ptr mymain = (my_main_ptr) cinfo->main;

	/* Read input data if we haven't filled the main buffer yet */
	if (! mymain->buffer_full) {
		if (! (*cinfo->coef->decompress_data) (cinfo,
			mymain->xbuffer[mymain->whichptr]))
			return;			/* suspension forced, can do nothing more */
		mymain->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
		mymain->iMCU_row_ctr++;	/* count rows received */
	}

	/* Postprocessor typically will not swallow all the input data it is handed
	* in one call (due to filling the output buffer first).  Must be prepared
	* to exit and restart.  This switch lets us keep track of how far we got.
	* Note that each case falls through to the next on successful completion.
	*/
	switch (mymain->context_state) {
  case CTX_POSTPONED_ROW:
	  /* Call postprocessor using previously set pointers for postponed row */
	  (*cinfo->post->post_process_data) (cinfo, mymain->xbuffer[mymain->whichptr],
		  &mymain->rowgroup_ctr, mymain->rowgroups_avail,
		  output_buf, out_row_ctr, out_rows_avail);
	  if (mymain->rowgroup_ctr < mymain->rowgroups_avail)
		  return;			/* Need to suspend */
	  mymain->context_state = CTX_PREPARE_FOR_IMCU;
	  if (*out_row_ctr >= out_rows_avail)
		  return;			/* Postprocessor exactly filled output buf */
	  /*FALLTHROUGH*/
  case CTX_PREPARE_FOR_IMCU:
	  /* Prepare to process first M-1 row groups of this iMCU row */
	  mymain->rowgroup_ctr = 0;
	  mymain->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1);
	  /* Check for bottom of image: if so, tweak pointers to "duplicate"
	  * the last sample row, and adjust rowgroups_avail to ignore padding rows.
	  */
	  if (mymain->iMCU_row_ctr == cinfo->total_iMCU_rows)
		  set_bottom_pointers(cinfo);
	  mymain->context_state = CTX_PROCESS_IMCU;
	  /*FALLTHROUGH*/
  case CTX_PROCESS_IMCU:
	  /* Call postprocessor using previously set pointers */
	  (*cinfo->post->post_process_data) (cinfo, mymain->xbuffer[mymain->whichptr],
		  &mymain->rowgroup_ctr, mymain->rowgroups_avail,
		  output_buf, out_row_ctr, out_rows_avail);
	  if (mymain->rowgroup_ctr < mymain->rowgroups_avail)
		  return;			/* Need to suspend */
	  /* After the first iMCU, change wraparound pointers to normal state */
	  if (mymain->iMCU_row_ctr == 1)
		  set_wraparound_pointers(cinfo);
	  /* Prepare to load new iMCU row using other xbuffer list */
	  mymain->whichptr ^= 1;	/* 0=>1 or 1=>0 */
	  mymain->buffer_full = FALSE;
	  /* Still need to process last row group of this iMCU row, */
	  /* which is saved at index M+1 of the other xbuffer */
	  mymain->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1);
	  mymain->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2);
	  mymain->context_state = CTX_POSTPONED_ROW;
	}
}


/*
* Initialize main buffer controller.
*/

GLOBAL(void)
jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
{
	my_main_ptr mymain;
	int ci, rgroup, ngroups;
	jpeg_component_info *compptr;

	mymain = (my_main_ptr)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		SIZEOF(my_main_controller));
	cinfo->main = (struct jpeg_d_main_controller *) mymain;
	mymain->pub.start_pass = start_pass_main;

	if (need_full_buffer)		/* shouldn't happen */
		ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);

	/* Allocate the workspace.
	* ngroups is the number of row groups we need.
	*/
	if (cinfo->upsample->need_context_rows) {
		if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */
			ERREXIT(cinfo, JERR_NOTIMPL);
		alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */
		ngroups = cinfo->min_DCT_scaled_size + 2;
	} else {
		ngroups = cinfo->min_DCT_scaled_size;
	}

	for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
		ci++, compptr++) {
			rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
				cinfo->min_DCT_scaled_size; /* height of a row group of component */
			mymain->buffer[ci] = (*cinfo->mem->alloc_sarray)
				((j_common_ptr) cinfo, JPOOL_IMAGE,
				compptr->width_in_blocks * compptr->DCT_scaled_size,
				(JDIMENSION) (rgroup * ngroups));
	}
}