0
0
Fork 0
mirror of https://github.com/ZDoom/gzdoom.git synced 2024-12-19 00:52:01 +00:00
gzdoom/jpeg-6b/jpegint.h
Randy Heit ed12bdc0f4 - Switched to IJG code for reading JPEG images. I have included a stripped-
down version of the library with the ZDoom source. (It actually uses less
  space than zlib now.) Unix users probably ought to use the system-supplied
  libjpeg instead. I modified Makefile.linux to hopefully do that. I'm sure
  Jim or someone will correct me if it doesn't actually work.


SVN r293 (trunk)
2006-08-16 18:08:39 +00:00

261 lines
10 KiB
C

/*
* jpegint.h
*
* Copyright (C) 1991-1997, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file provides common declarations for the various JPEG modules.
* These declarations are considered internal to the JPEG library; most
* applications using the library shouldn't need to include this file.
*/
/* Declarations for both compression & decompression */
typedef enum { /* Operating modes for buffer controllers */
JBUF_PASS_THRU, /* Plain stripwise operation */
/* Remaining modes require a full-image buffer to have been created */
JBUF_SAVE_SOURCE, /* Run source subobject only, save output */
JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */
JBUF_SAVE_AND_PASS /* Run both subobjects, save output */
} J_BUF_MODE;
/* Values of global_state field (jdapi.c has some dependencies on ordering!) */
#define CSTATE_START 100 /* after create_compress */
#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */
#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */
#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */
#define DSTATE_START 200 /* after create_decompress */
#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */
#define DSTATE_READY 202 /* found SOS, ready for start_decompress */
#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/
#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */
#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */
//#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */
//#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */
#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */
#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */
#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */
/* Declarations for decompression modules */
/* Master control module */
struct jpeg_decomp_master {
JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo));
JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo));
};
/* Input control module */
struct jpeg_input_controller {
JMETHOD(int, consume_input, (j_decompress_ptr cinfo));
JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo));
JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo));
/* State variables made visible to other modules */
boolean has_multiple_scans; /* True if file has multiple scans */
boolean eoi_reached; /* True when EOI has been consumed */
};
/* Main buffer control (downsampled-data buffer) */
struct jpeg_d_main_controller {
JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
JMETHOD(void, process_data, (j_decompress_ptr cinfo,
JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
JDIMENSION out_rows_avail));
};
/* Coefficient buffer control */
struct jpeg_d_coef_controller {
JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
JMETHOD(int, consume_data, (j_decompress_ptr cinfo));
JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo));
JMETHOD(int, decompress_data, (j_decompress_ptr cinfo,
JSAMPIMAGE output_buf));
/* Pointer to array of coefficient virtual arrays, or NULL if none */
jvirt_barray_ptr *coef_arrays;
};
/* Decompression postprocessing (color quantization buffer control) */
struct jpeg_d_post_controller {
JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
JMETHOD(void, post_process_data, (j_decompress_ptr cinfo,
JSAMPIMAGE input_buf,
JDIMENSION *in_row_group_ctr,
JDIMENSION in_row_groups_avail,
JSAMPARRAY output_buf,
JDIMENSION *out_row_ctr,
JDIMENSION out_rows_avail));
};
/* Marker reading & parsing */
struct jpeg_marker_reader {
JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo));
/* Read markers until SOS or EOI.
* Returns same codes as are defined for jpeg_consume_input:
* JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
*/
JMETHOD(int, read_markers, (j_decompress_ptr cinfo));
/* Read a restart marker --- exported for use by entropy decoder only */
jpeg_marker_parser_method read_restart_marker;
/* State of marker reader --- nominally internal, but applications
* supplying COM or APPn handlers might like to know the state.
*/
boolean saw_SOI; /* found SOI? */
boolean saw_SOF; /* found SOF? */
int next_restart_num; /* next restart number expected (0-7) */
unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */
};
/* Entropy decoding */
struct jpeg_entropy_decoder {
JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo,
JBLOCKROW *MCU_data));
/* This is here to share code between baseline and progressive decoders; */
/* other modules probably should not use it */
boolean insufficient_data; /* set TRUE after emitting warning */
};
/* Inverse DCT (also performs dequantization) */
typedef JMETHOD(void, inverse_DCT_method_ptr,
(j_decompress_ptr cinfo, jpeg_component_info * compptr,
JCOEFPTR coef_block,
JSAMPARRAY output_buf, JDIMENSION output_col));
struct jpeg_inverse_dct {
JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
/* It is useful to allow each component to have a separate IDCT method. */
inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS];
};
/* Upsampling (note that upsampler must also call color converter) */
struct jpeg_upsampler {
JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
JMETHOD(void, upsample, (j_decompress_ptr cinfo,
JSAMPIMAGE input_buf,
JDIMENSION *in_row_group_ctr,
JDIMENSION in_row_groups_avail,
JSAMPARRAY output_buf,
JDIMENSION *out_row_ctr,
JDIMENSION out_rows_avail));
boolean need_context_rows; /* TRUE if need rows above & below */
};
/* Colorspace conversion */
struct jpeg_color_deconverter {
JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
JMETHOD(void, color_convert, (j_decompress_ptr cinfo,
JSAMPIMAGE input_buf, JDIMENSION input_row,
JSAMPARRAY output_buf, int num_rows));
};
/* Color quantization or color precision reduction */
struct jpeg_color_quantizer {
JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan));
JMETHOD(void, color_quantize, (j_decompress_ptr cinfo,
JSAMPARRAY input_buf, JSAMPARRAY output_buf,
int num_rows));
JMETHOD(void, finish_pass, (j_decompress_ptr cinfo));
JMETHOD(void, new_color_map, (j_decompress_ptr cinfo));
};
/* Miscellaneous useful macros */
#undef MAX
#define MAX(a,b) ((a) > (b) ? (a) : (b))
#undef MIN
#define MIN(a,b) ((a) < (b) ? (a) : (b))
/* We assume that right shift corresponds to signed division by 2 with
* rounding towards minus infinity. This is correct for typical "arithmetic
* shift" instructions that shift in copies of the sign bit. But some
* C compilers implement >> with an unsigned shift. For these machines you
* must define RIGHT_SHIFT_IS_UNSIGNED.
* RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity.
* It is only applied with constant shift counts. SHIFT_TEMPS must be
* included in the variables of any routine using RIGHT_SHIFT.
*/
#ifdef RIGHT_SHIFT_IS_UNSIGNED
#define SHIFT_TEMPS INT32 shift_temp;
#define RIGHT_SHIFT(x,shft) \
((shift_temp = (x)) < 0 ? \
(shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \
(shift_temp >> (shft)))
#else
#define SHIFT_TEMPS
#define RIGHT_SHIFT(x,shft) ((x) >> (shft))
#endif
/* Compression module initialization routines */
EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo));
EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo,
boolean transcode_only));
EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo,
boolean need_full_buffer));
EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo,
boolean need_full_buffer));
EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo,
boolean need_full_buffer));
EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo));
EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo));
EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo));
EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo));
EXTERN(void) jinit_phuff_encoder JPP((j_compress_ptr cinfo));
EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo));
/* Decompression module initialization routines */
EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo));
EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo,
boolean need_full_buffer));
EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo,
boolean need_full_buffer));
EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo,
boolean need_full_buffer));
EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo));
EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo));
EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo));
EXTERN(void) jinit_phuff_decoder JPP((j_decompress_ptr cinfo));
EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo));
EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo));
EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo));
EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo));
EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo));
EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo));
/* Memory manager initialization */
EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo));
/* Utility routines in jutils.c */
static INLINE long jdiv_round_up (long a, long b)
/* Compute a/b rounded up to next integer, ie, ceil(a/b) */
/* Assumes a >= 0, b > 0 */
{
return (a + b - 1L) / b;
}
static INLINE long jround_up (long a, long b)
/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */
/* Assumes a >= 0, b > 0 */
{
a += b - 1L;
return a - (a % b);
}
EXTERN(long) jround_up JPP((long a, long b));
EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row,
JSAMPARRAY output_array, int dest_row,
int num_rows, JDIMENSION num_cols));
/* Constant tables in jutils.c */
#if 0 /* This table is not actually needed in v6a */
extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */
#endif
extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */