gzdoom/src/s_environment.cpp

647 lines
17 KiB
C++
Raw Normal View History

#include "doomtype.h"
#include "tarray.h"
#include "s_sound.h"
#include "farchive.h"
#include "sc_man.h"
#include "cmdlib.h"
#include "templates.h"
#include "w_wad.h"
#include "i_system.h"
struct FReverbField
{
int Min, Max;
float REVERB_PROPERTIES::*Float;
int REVERB_PROPERTIES::*Int;
unsigned int Flag;
};
static const FReverbField ReverbFields[] =
{
{ 0, 25, 0, &REVERB_PROPERTIES::Environment, 0 },
{ 1000, 100000, &REVERB_PROPERTIES::EnvSize, 0, 0 },
{ 0, 1000, &REVERB_PROPERTIES::EnvDiffusion, 0, 0 },
{ -10000, 0, 0, &REVERB_PROPERTIES::Room, 0 },
{ -10000, 0, 0, &REVERB_PROPERTIES::RoomHF, 0 },
{ -10000, 0, 0, &REVERB_PROPERTIES::RoomLF, 0 },
{ 100, 20000, &REVERB_PROPERTIES::DecayTime, 0, 0 },
{ 100, 2000, &REVERB_PROPERTIES::DecayHFRatio, 0, 0 },
{ 100, 2000, &REVERB_PROPERTIES::DecayLFRatio, 0, 0 },
{ -10000, 1000, 0, &REVERB_PROPERTIES::Reflections, 0 },
{ 0, 300, &REVERB_PROPERTIES::ReflectionsDelay, 0, 0 },
{ -2000000, 2000000, &REVERB_PROPERTIES::ReflectionsPan0, 0, 0 },
{ -2000000, 2000000, &REVERB_PROPERTIES::ReflectionsPan1, 0, 0 },
{ -2000000, 2000000, &REVERB_PROPERTIES::ReflectionsPan2, 0, 0 },
{ -10000, 2000, 0, &REVERB_PROPERTIES::Reverb, 0 },
{ 0, 100, &REVERB_PROPERTIES::ReverbDelay, 0, 0 },
{ -2000000, 2000000, &REVERB_PROPERTIES::ReverbPan0, 0, 0 },
{ -2000000, 2000000, &REVERB_PROPERTIES::ReverbPan1, 0, 0 },
{ -2000000, 2000000, &REVERB_PROPERTIES::ReverbPan2, 0, 0 },
{ 75, 250, &REVERB_PROPERTIES::EchoTime, 0, 0 },
{ 0, 1000, &REVERB_PROPERTIES::EchoDepth, 0, 0 },
{ 40, 4000, &REVERB_PROPERTIES::ModulationTime, 0, 0 },
{ 0, 1000, &REVERB_PROPERTIES::ModulationDepth, 0, 0 },
{ -100000, 0, &REVERB_PROPERTIES::AirAbsorptionHF, 0, 0 },
{ 1000000, 20000000, &REVERB_PROPERTIES::HFReference, 0, 0 },
{ 20000, 1000000, &REVERB_PROPERTIES::LFReference, 0, 0 },
{ 0, 10000, &REVERB_PROPERTIES::RoomRolloffFactor, 0, 0 },
{ 0, 100000, &REVERB_PROPERTIES::Diffusion, 0, 0 },
{ 0, 100000, &REVERB_PROPERTIES::Density, 0, 0 },
{ 0, 0, 0, 0, 1 },
{ 0, 0, 0, 0, 2 },
{ 0, 0, 0, 0, 0 },
{ 0, 0, 0, 0, 5 },
{ 0, 0, 0, 0, 3 },
{ 0, 0, 0, 0, 4 },
{ 0, 0, 0, 0, 6 },
{ 0, 0, 0, 0, 7 }
};
#define NUM_REVERB_FIELDS (int(countof(ReverbFields)))
static const char *ReverbFieldNames[NUM_REVERB_FIELDS+2] =
{
"Environment",
"EnvironmentSize",
"EnvironmentDiffusion",
"Room",
"RoomHF",
"RoomLF",
"DecayTime",
"DecayHFRatio",
"DecayLFRatio",
"Reflections",
"ReflectionsDelay",
"ReflectionsPanX",
"ReflectionsPanY",
"ReflectionsPanZ",
"Reverb",
"ReverbDelay",
"ReverbPanX",
"ReverbPanY",
"ReverbPanZ",
"EchoTime",
"EchoDepth",
"ModulationTime",
"ModulationDepth",
"AirAbsorptionHF",
"HFReference",
"LFReference",
"RoomRolloffFactor",
"Diffusion",
"Density",
"bReflectionsScale",
"bReflectionsDelayScale",
"bDecayTimeScale",
"bDecayHFLimit",
"bReverbScale",
"bReverbDelayScale",
"bEchoTimeScale",
"bModulationTimeScale",
"}",
NULL
};
static const char *BoolNames[3] = { "False", "True", NULL };
static ReverbContainer DSPWater =
{
// Based on the "off" reverb, this one uses the software water effect,
// which is completely independant from EAX-like reverb.
NULL,
"DSP Water",
0xffff,
true,
false,
{0, 0, 7.5f, 1.00f, -10000, -10000, 0, 1.00f, 1.00f, 1.0f, -2602, 0.007f, 0.0f,0.0f,0.0f, 200, 0.011f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 0.0f, 0.0f, 0x33f },
true
};
static ReverbContainer Psychotic =
{
&DSPWater,
"Psychotic",
0x1900,
true,
false,
{0,25, 1.0f, 0.50f, -1000, -151, 0, 7.56f, 0.91f, 1.0f, -626, 0.020f, 0.0f,0.0f,0.0f, 774, 0.030f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 4.00f, 1.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x1f },
false
};
static ReverbContainer Dizzy =
{
&Psychotic,
"Dizzy",
0x1800,
true,
false,
{0,24, 1.8f, 0.60f, -1000, -400, 0, 17.23f, 0.56f, 1.0f, -1713, 0.020f, 0.0f,0.0f,0.0f, -613, 0.030f, 0.0f,0.0f,0.0f, 0.250f, 1.00f, 0.81f, 0.310f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x1f },
false
};
static ReverbContainer Drugged =
{
&Dizzy,
"Drugged",
0x1700,
true,
false,
{0,23, 1.9f, 0.50f, -1000, 0, 0, 8.39f, 1.39f, 1.0f, -115, 0.002f, 0.0f,0.0f,0.0f, 985, 0.030f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 1.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x1f },
false
};
static ReverbContainer Underwater =
{
&Drugged,
"Underwater",
0x1600,
true,
false,
{0,22, 1.8f, 1.00f, -1000, -4000, 0, 1.49f, 0.10f, 1.0f, -449, 0.007f, 0.0f,0.0f,0.0f, 1700, 0.011f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 1.18f, 0.348f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer SewerPipe =
{
&Underwater,
"Sewer Pipe",
0x1500,
true,
false,
{0,21, 1.7f, 0.80f, -1000, -1000, 0, 2.81f, 0.14f, 1.0f, 429, 0.014f, 0.0f,0.0f,0.0f, 1023, 0.021f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 80.0f, 60.0f, 0x3f },
false
};
static ReverbContainer ParkingLot =
{
&SewerPipe,
"Parking Lot",
0x1400,
true,
false,
{0,20, 8.3f, 1.00f, -1000, 0, 0, 1.65f, 1.50f, 1.0f, -1363, 0.008f, 0.0f,0.0f,0.0f, -1153, 0.012f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x1f },
false
};
static ReverbContainer Plain =
{
&ParkingLot,
"Plain",
0x1300,
true,
false,
{0,19, 42.5f, 0.21f, -1000, -2000, 0, 1.49f, 0.50f, 1.0f, -2466, 0.179f, 0.0f,0.0f,0.0f, -1926, 0.100f, 0.0f,0.0f,0.0f, 0.250f, 1.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 21.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Quarry =
{
&Plain,
"Quarry",
0x1200,
true,
false,
{0,18, 17.5f, 1.00f, -1000, -1000, 0, 1.49f, 0.83f, 1.0f, -10000, 0.061f, 0.0f,0.0f,0.0f, 500, 0.025f, 0.0f,0.0f,0.0f, 0.125f, 0.70f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Mountains =
{
&Quarry,
"Mountains",
0x1100,
true,
false,
{0,17, 100.0f, 0.27f, -1000, -2500, 0, 1.49f, 0.21f, 1.0f, -2780, 0.300f, 0.0f,0.0f,0.0f, -1434, 0.100f, 0.0f,0.0f,0.0f, 0.250f, 1.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 27.0f, 100.0f, 0x1f },
false
};
static ReverbContainer City =
{
&Mountains,
"City",
0x1000,
true,
false,
{0,16, 7.5f, 0.50f, -1000, -800, 0, 1.49f, 0.67f, 1.0f, -2273, 0.007f, 0.0f,0.0f,0.0f, -1691, 0.011f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 50.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Forest =
{
&City,
"Forest",
0x0F00,
true,
false,
{0,15, 38.0f, 0.30f, -1000, -3300, 0, 1.49f, 0.54f, 1.0f, -2560, 0.162f, 0.0f,0.0f,0.0f, -229, 0.088f, 0.0f,0.0f,0.0f, 0.125f, 1.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 79.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Alley =
{
&Forest,
"Alley",
0x0E00,
true,
false,
{0,14, 7.5f, 0.30f, -1000, -270, 0, 1.49f, 0.86f, 1.0f, -1204, 0.007f, 0.0f,0.0f,0.0f, -4, 0.011f, 0.0f,0.0f,0.0f, 0.125f, 0.95f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer StoneCorridor =
{
&Alley,
"Stone Corridor",
0x0D00,
true,
false,
{0,13, 13.5f, 1.00f, -1000, -237, 0, 2.70f, 0.79f, 1.0f, -1214, 0.013f, 0.0f,0.0f,0.0f, 395, 0.020f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Hallway =
{
&StoneCorridor,
"Hallway",
0x0C00,
true,
false,
{0,12, 1.8f, 1.00f, -1000, -300, 0, 1.49f, 0.59f, 1.0f, -1219, 0.007f, 0.0f,0.0f,0.0f, 441, 0.011f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer CarpettedHallway =
{
&Hallway,
"Carpetted Hallway",
0x0B00,
true,
false,
{0,11, 1.9f, 1.00f, -1000, -4000, 0, 0.30f, 0.10f, 1.0f, -1831, 0.002f, 0.0f,0.0f,0.0f, -1630, 0.030f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Hangar =
{
&CarpettedHallway,
"Hangar",
0x0A00,
true,
false,
{0,10, 50.3f, 1.00f, -1000, -1000, 0, 10.05f, 0.23f, 1.0f, -602, 0.020f, 0.0f,0.0f,0.0f, 198, 0.030f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Arena =
{
&Hangar,
"Arena",
0x0900,
true,
false,
{0, 9, 36.2f, 1.00f, -1000, -698, 0, 7.24f, 0.33f, 1.0f, -1166, 0.020f, 0.0f,0.0f,0.0f, 16, 0.030f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Cave =
{
&Arena,
"Cave",
0x0800,
true,
false,
{0, 8, 14.6f, 1.00f, -1000, 0, 0, 2.91f, 1.30f, 1.0f, -602, 0.015f, 0.0f,0.0f,0.0f, -302, 0.022f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x1f },
false
};
static ReverbContainer ConcertHall =
{
&Cave,
"Concert Hall",
0x0700,
true,
false,
{0, 7, 19.6f, 1.00f, -1000, -500, 0, 3.92f, 0.70f, 1.0f, -1230, 0.020f, 0.0f,0.0f,0.0f, -2, 0.029f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Auditorium =
{
&ConcertHall,
"Auditorium",
0x0600,
true,
false,
{0, 6, 21.6f, 1.00f, -1000, -476, 0, 4.32f, 0.59f, 1.0f, -789, 0.020f, 0.0f,0.0f,0.0f, -289, 0.030f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer StoneRoom =
{
&Auditorium,
"Stone Room",
0x0500,
true,
false,
{0, 5, 11.6f, 1.00f, -1000, -300, 0, 2.31f, 0.64f, 1.0f, -711, 0.012f, 0.0f,0.0f,0.0f, 83, 0.017f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer LivingRoom =
{
&StoneRoom,
"Living Room",
0x0400,
true,
false,
{0, 4, 2.5f, 1.00f, -1000, -6000, 0, 0.50f, 0.10f, 1.0f, -1376, 0.003f, 0.0f,0.0f,0.0f, -1104, 0.004f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Bathroom =
{
&LivingRoom,
"Bathroom",
0x0300,
true,
false,
{0, 3, 1.4f, 1.00f, -1000, -1200, 0, 1.49f, 0.54f, 1.0f, -370, 0.007f, 0.0f,0.0f,0.0f, 1030, 0.011f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 60.0f, 0x3f },
false
};
static ReverbContainer Room =
{
&Bathroom,
"Room",
0x0200,
true,
false,
{0, 2, 1.9f, 1.00f, -1000, -454, 0, 0.40f, 0.83f, 1.0f, -1646, 0.002f, 0.0f,0.0f,0.0f, 53, 0.003f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer PaddedCell =
{
&Room,
"Padded Cell",
0x0100,
true,
false,
{0, 1, 1.4f, 1.00f, -1000, -6000, 0, 0.17f, 0.10f, 1.0f, -1204, 0.001f, 0.0f,0.0f,0.0f, 207, 0.002f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Generic =
{
&PaddedCell,
"Generic",
0x0001,
true,
false,
{0, 0, 7.5f, 1.00f, -1000, -100, 0, 1.49f, 0.83f, 1.0f, -2602, 0.007f, 0.0f,0.0f,0.0f, 200, 0.011f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 100.0f, 100.0f, 0x3f },
false
};
static ReverbContainer Off =
{
&Generic,
"Off",
0x0000,
true,
false,
{0, 0, 7.5f, 1.00f, -10000, -10000, 0, 1.00f, 1.00f, 1.0f, -2602, 0.007f, 0.0f,0.0f,0.0f, 200, 0.011f, 0.0f,0.0f,0.0f, 0.250f, 0.00f, 0.25f, 0.000f, -5.0f, 5000.0f, 250.0f, 0.0f, 0.0f, 0.0f, 0x33f },
false
};
ReverbContainer *DefaultEnvironments[26] =
{
&Off, &PaddedCell, &Room, &Bathroom, &LivingRoom, &StoneRoom, &Auditorium,
&ConcertHall, &Cave, &Arena, &Hangar, &CarpettedHallway, &Hallway, &StoneCorridor,
&Alley, &Forest, &City, &Mountains, &Quarry, &Plain, &ParkingLot, &SewerPipe,
&Underwater, &Drugged, &Dizzy, &Psychotic
};
ReverbContainer *Environments = &Off;
ReverbContainer *S_FindEnvironment (const char *name)
{
ReverbContainer *probe = Environments;
if (name == NULL)
return NULL;
while (probe != NULL)
{
if (stricmp (probe->Name, name) == 0)
{
return probe;
}
probe = probe->Next;
}
return NULL;
}
ReverbContainer *S_FindEnvironment (int id)
{
ReverbContainer *probe = Environments;
while (probe != NULL && probe->ID < id)
{
probe = probe->Next;
}
return (probe && probe->ID == id ? probe : NULL);
}
void S_AddEnvironment (ReverbContainer *settings)
{
ReverbContainer *probe = Environments;
ReverbContainer **ptr = &Environments;
while (probe != NULL && probe->ID < settings->ID)
{
ptr = &probe->Next;
probe = probe->Next;
}
if (probe != NULL && probe->ID == settings->ID)
{
// Built-in environments cannot be changed
if (!probe->Builtin)
{
settings->Next = probe->Next;
*ptr = settings;
delete[] const_cast<char *>(probe->Name);
delete probe;
}
}
else
{
settings->Next = probe;
*ptr = settings;
}
}
FArchive &operator<< (FArchive &arc, ReverbContainer *&env)
{
WORD id;
if (arc.IsStoring())
{
if (env != NULL)
{
arc << env->ID;
}
else
{
id = 0;
arc << id;
}
}
else
{
arc << id;
env = S_FindEnvironment (id);
}
return arc;
}
static void ReadReverbDef (int lump)
{
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
FScanner sc;
const ReverbContainer *def;
ReverbContainer *newenv;
REVERB_PROPERTIES props;
char *name;
int id1, id2, i, j;
bool inited[NUM_REVERB_FIELDS];
BYTE bools[32];
sc.OpenLumpNum(lump);
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
while (sc.GetString ())
{
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
name = copystring (sc.String);
sc.MustGetNumber ();
id1 = sc.Number;
sc.MustGetNumber ();
id2 = sc.Number;
sc.MustGetStringName ("{");
memset (inited, 0, sizeof(inited));
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
props.Instance = 0;
props.Flags = 0;
while (sc.MustGetString (), NUM_REVERB_FIELDS > (i = sc.MustMatchString (ReverbFieldNames)))
{
if (ReverbFields[i].Float)
{
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
sc.MustGetFloat ();
props.*ReverbFields[i].Float = (float)clamp (sc.Float,
double(ReverbFields[i].Min)/1000,
double(ReverbFields[i].Max)/1000);
}
else if (ReverbFields[i].Int)
{
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
sc.MustGetNumber ();
props.*ReverbFields[i].Int = (j = clamp (sc.Number,
ReverbFields[i].Min, ReverbFields[i].Max));
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
if (i == 0 && j != sc.Number)
{
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
sc.ScriptError ("The Environment field is out of range.");
}
}
else
{
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
sc.MustGetString ();
bools[ReverbFields[i].Flag] = sc.MustMatchString (BoolNames);
}
inited[i] = true;
}
if (!inited[0])
{
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
sc.ScriptError ("Sound %s is missing an Environment field.", name);
}
// Add the new environment to the list, filling in uninitialized fields
// with values from the standard environment specified.
def = DefaultEnvironments[props.Environment];
for (i = 0; i < NUM_REVERB_FIELDS; ++i)
{
if (ReverbFields[i].Float)
{
if (!inited[i])
{
props.*ReverbFields[i].Float = def->Properties.*ReverbFields[i].Float;
}
}
else if (ReverbFields[i].Int)
{
if (!inited[i])
{
props.*ReverbFields[i].Int = def->Properties.*ReverbFields[i].Int;
}
}
else
{
if (!inited[i])
{
int mask = 1 << ReverbFields[i].Flag;
if (def->Properties.Flags & mask)
{
props.Flags |= mask;
}
}
else
{
if (bools[ReverbFields[i].Flag])
{
props.Flags |= 1 << ReverbFields[i].Flag;
}
}
}
}
newenv = new ReverbContainer;
newenv->Next = NULL;
newenv->Name = name;
newenv->ID = (id1 << 8) | id2;
newenv->Builtin = false;
newenv->Properties = props;
newenv->SoftwareWater = false;
S_AddEnvironment (newenv);
}
}
void S_ParseReverbDef ()
{
int lump, lastlump = 0;
atterm (S_UnloadReverbDef);
S_UnloadReverbDef ();
while ((lump = Wads.FindLump ("REVERBS", &lastlump)) != -1)
{
ReadReverbDef (lump);
}
}
void S_UnloadReverbDef ()
{
ReverbContainer *probe = Environments;
ReverbContainer **pNext = NULL;
while (probe != NULL)
{
ReverbContainer *next = probe->Next;
if (!probe->Builtin)
{
if (pNext != NULL) *pNext = probe->Next;
delete[] const_cast<char *>(probe->Name);
delete probe;
}
else
{
pNext = &probe->Next;
}
probe = next;
}
Environments = &Off;
}