zdoom
/
gzdoom
mirror of https://github.com/ZDoom/gzdoom.git
0
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
gzdoom/Makefile.linux

150 lines
4.0 KiB
Makefile
Raw Normal View History

- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
# created on 4/12/2006 by James Bentler
- ClassifyLine now chooses either SSE2 or regular x87 math depending on whether or not SSE2 is available at runtime. Since most of the time is spent in ClassifyLine, using SSE2 in just this one function helps the most. - Nodebuilding is a little faster if we inline PointOnSide. - Changed FEventTree into a regular binary tree, since there just aren't enough nodes inserted into it to make a red-black tree worthwhile. - Added more checks at the start of ClassifyLine so that it has a better chance of avoiding the more complicated checking, and it seems to have paid off with a reasonably modest performance boost. - Added a "vertex map" for ZDBSP's vertex selection. (Think BLOCKMAP for vertices instead of lines.) On large maps, this can result in a very significant speed up. (In one particular map, ZDBSP had previously spent 40% of its time just scanning through all the vertices in the map. Now the time it spends finding vertices is immeasurable.) On small maps, this won't make much of a difference, because the number of vertices to search was so small to begin with. SVN r173 (trunk)
2006-06-06 21:39:08 +00:00
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
CXX ?= g++
Updated Jim's Makefile.linux. SVN r42 (trunk)
2006-04-13 22:35:56 +00:00
CC ?= gcc
- Updated Jim's Makefile.linux. - Added support for wrapping midtextures vertically. - Since zdoom.wad is now zdoom.pk3, the default mapinfos can use full pathnames. So now they do. - Fixed: The DSimpleCanvas constructor used a pitch too narrow on screens wider than 640 pixels when using a non-AMD processor and the processor's L1 cache line size could not be determined. I think this should fix the issue of weirdly rendered 8 pixel wide borders on the left and right of the screen that some people experienced. - Fixed: The secnodes were never freed. SVN r93 (trunk)
2006-05-09 21:30:31 +00:00
NASM ?= nasm
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
CCDV = @./ccdv
Added Jim's latest changes to the Linux makefiles. SVN r166 (trunk)
2006-06-05 07:56:30 +00:00
ifdef DEBUG
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
CFLAGS ?= -pipe -Wall -Wno-unused -fno-strict-aliasing
April 20, 2006 (Changes by Graf Zahl) - Fixed: Strife's ending check included destroying the computer - an event that happens before the branch in the story. - Fixed: The overloaded FRandom::Random2 function with mask parameter didn't use its parameter. - Added Jim's latest makefile.linux SVN r60 (trunk)
2006-04-21 16:32:49 +00:00
else
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
CFLAGS ?= -pipe -Wall -Wno-unused -fno-strict-aliasing -O2 -fomit-frame-pointer
CXXFLAGS ?= -fno-rtti
Added Jim's latest changes to the Linux makefiles. SVN r166 (trunk)
2006-06-05 07:56:30 +00:00
endif
ifdef GC
CFLAGS += -ffunction-sections
LDFLAGS += -Wl,--gc-sections
April 20, 2006 (Changes by Graf Zahl) - Fixed: Strife's ending check included destroying the computer - an event that happens before the branch in the story. - Fixed: The overloaded FRandom::Random2 function with mask parameter didn't use its parameter. - Added Jim's latest makefile.linux SVN r60 (trunk)
2006-04-21 16:32:49 +00:00
endif
- Fixed: The FLAC/makefile.mgw should use md5.o as an OBJ, not md5.c. - Fixed: The Linux makefile probably shouldn't be using the bundled zlib headers, either. SVN r580 (trunk)
2007-12-06 17:38:05 +00:00
CFLAGS += -MMD -DHAVE_FILELENGTH -D__forceinline=inline `sdl-config --cflags` `pkg-config gtk+-2.0 --cflags`
SVN r51 (trunk)
2006-04-17 13:53:34 +00:00
CFLAGS += -Dstricmp=strcasecmp -Dstrnicmp=strncasecmp -DNEED_STRUPR
- Added a GTK+ version of the IWAD selection dialog box. That brings the Linux port one step closer to feature parity with the Windows version. SVN r451 (trunk)
2007-01-16 01:53:43 +00:00
LDFLAGS += -lFLAC++ -lFLAC -lz -ljpeg -lfmod `sdl-config --libs` `pkg-config gtk+-2.0 --libs`
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
NASMFLAGS += -f elf -DM_TARGET_LINUX
- Added DTA_TopOffset and DTA_LeftOffset values to the automap background drawer. - Fixed: DECORATE color translations with explicit colors didn't work because the code treated byte values as fixed point. - Fixed: LEVEL_NOALLIES must clear MF_FRIENDLY off any spawned actor except players. Otherwise it doesn't work properly. - Fixed: Entering a backslash in the player's name box caused a crash because the code analyzing the string was missing a NULL pointer check. - Fixed: Thing_Hate and Teleport_ZombieChanger unconditionally made state jumps, even for dead monsters. - Fixed: The palette flash for item pickup was not reset upon a player's death. - Fixed: P_DamageMobj tried to get damage multiplier information from the damage inflictor, not the attacker. - Fixed: PowerTimeFreezer::DoEffect did not call its superclass method. - fixed: When morphed monsters died they tried to set MF3_STAYMORPHED for the attacker, not themselves. This caused a crash when they were killed by a crusher. SVN r539 (trunk)
2007-07-12 15:15:57 +00:00
SRCDIRS = src/ $(addprefix src/,g_doom/ g_heretic/ g_hexen/ g_raven/ g_shared/ g_strife/ oplsynth/ sound/ sdl/ textures/ thingdef/)
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
VPATH = $(SRCDIRS)
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
INCLUDES = $(addprefix -I,$(SRCDIRS))
Updated Jim's Makefile.linux. SVN r42 (trunk)
2006-04-13 22:35:56 +00:00
CFLAGS += $(INCLUDES)
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
RELEASEOBJ ?= releaseobj
DEBUGOBJ ?= debugobj
Updated Jim's Makefile.linux. SVN r42 (trunk)
2006-04-13 22:35:56 +00:00
CPPSRCS = $(wildcard $(addsuffix *.cpp,$(SRCDIRS)))
CSRCS = $(wildcard $(addsuffix *.c,$(SRCDIRS)))
Added Jim's latest changes to the Linux makefiles. SVN r166 (trunk)
2006-06-05 07:56:30 +00:00
ifdef NOASM
CFLAGS += -DNOASM
else
- Fixed: Hexen's ammo display in the status bar cannot be refreshed partially because the background patch has to be drawn always to overwrite the old display. - Fixed: Giving a health item to a non-player caused a crash. - Added a compatibility option to limit deh.MaxHealth to the health bonus. Originally this value wasn't used for health packs. Doing this was a bug in Boom but since there's quite a few maps out there which require Boom's altered behavior it has to be compatibility optioned. - Fixed: The health bonus's max health must be defined by deh.MaxHealth, not deh.MaxSoulsphere. To achieve this deh.MaxHealth's handling had to be altered because it has to default to 100. - Fixed: ZDBSP created incorrect side references with compressed sidedefs and both sidedefs of a linedef being the same. This only affects the external tool because the internal node builder is run after uncompressing the sidedefs. - Added Jim's latest makefile.linux. - Added a consistency check to the PNAMES loader because one crash log indicated that it crashed due to a corrupt PNAMES lump. - Brought back the sector based sound target handling as a compatibility option. This radical change just broke far too many maps that depend on the original behavior. Strife's special AI functions are excluded though because they work better with the new method. SVN r56 (trunk)
2006-04-20 14:21:27 +00:00
ASRCS = $(wildcard src/*.nas)
CFLAGS += -DUSEASM=1
Updated Jim's Makefile.linux. SVN r42 (trunk)
2006-04-13 22:35:56 +00:00
endif
SRCS = $(CSRCS) $(CPPSRCS) $(ASRCS)
CPPOBJFILES = $(notdir $(patsubst %.cpp,%.o,$(CPPSRCS)))
COBJFILES = $(notdir $(patsubst %.c,%.o,$(CSRCS)))
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
AOBJFILES = $(notdir $(patsubst %.nas,%.o,$(ASRCS)))
ZDOOM = zdoom
ZDOOMDEBUG = zdoomd
Added Jim's latest changes to the Linux makefiles. SVN r166 (trunk)
2006-06-05 07:56:30 +00:00
ifdef DEBUG
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
OBJDIR = $(DEBUGOBJ)
Updated Jim's Makefile.linux. SVN r42 (trunk)
2006-04-13 22:35:56 +00:00
CFLAGS += -D_DEBUG -g3
- Updated Jim's Makefile.linux. - Added support for wrapping midtextures vertically. - Since zdoom.wad is now zdoom.pk3, the default mapinfos can use full pathnames. So now they do. - Fixed: The DSimpleCanvas constructor used a pitch too narrow on screens wider than 640 pixels when using a non-AMD processor and the processor's L1 cache line size could not be determined. I think this should fix the issue of weirdly rendered 8 pixel wide borders on the left and right of the screen that some people experienced. - Fixed: The secnodes were never freed. SVN r93 (trunk)
2006-05-09 21:30:31 +00:00
NASMFLAGS += -g
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
ZDOOMBIN = $(ZDOOMDEBUG)
Added Jim's latest changes to the Linux makefiles. SVN r166 (trunk)
2006-06-05 07:56:30 +00:00
else
OBJDIR = $(RELEASEOBJ)
CFLAGS += -DNDEBUG
- Fixed: If you called the FString assignment operator that accepts a const char * with a string inside its buffer, it released the buffer before copying the string. - Added a new FString constructor that creates the string from a lump. - Fixed: G_DoReborn() calls G_InitNew() with mapname set to level.mapname. G_InitNew() then copies it onto level.mapname, which is undefined behavior (although it does work as we want it to). - Modified FMemLump to store its data using FString. That class provides a convenient method of storing reference counted data, so now FMemLump doesn't need to muck about sneakily using const_casts and possibly tricking its users into thinking that an old one is still valid after being assigned to a new one. - Fixed: The IMGZ, PNG, PCX, and JPEG loaders assumed the files were large enough for their headers without actually checking. SVN r463 (trunk)
2007-01-25 04:02:06 +00:00
LDFLAGS += -Wl,-Map=$(ZDOOM).map
ifndef NOSTRIP
LDFLAGS += -s
endif
Added Jim's latest changes to the Linux makefiles. SVN r166 (trunk)
2006-06-05 07:56:30 +00:00
ZDOOMBIN = $(ZDOOM)
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
endif
Updated Jim's Makefile.linux. SVN r42 (trunk)
2006-04-13 22:35:56 +00:00
CXXFLAGS += $(CFLAGS)
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
SVN r51 (trunk)
2006-04-17 13:53:34 +00:00
COBJS = $(addprefix $(OBJDIR)/,$(CPPOBJFILES) $(COBJFILES))
DEPS = $(patsubst %.o,%.d,$(COBJS))
OBJS = $(addprefix $(OBJDIR)/,$(AOBJFILES)) $(COBJS)
- Updated Jim's Makefile.linux. - Added support for wrapping midtextures vertically. - Since zdoom.wad is now zdoom.pk3, the default mapinfos can use full pathnames. So now they do. - Fixed: The DSimpleCanvas constructor used a pitch too narrow on screens wider than 640 pixels when using a non-AMD processor and the processor's L1 cache line size could not be determined. I think this should fix the issue of weirdly rendered 8 pixel wide borders on the left and right of the screen that some people experienced. - Fixed: The secnodes were never freed. SVN r93 (trunk)
2006-05-09 21:30:31 +00:00
all: $(ZDOOMBIN) toolsandpk3 zdoom.pk3
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
- Unlimited the monster pain sounds in Hexen after playing as the Cleric a while and killing centaurs with the flechette. - Fixed: Moving to an old level in a hub caused the old player's inventory to spawn owned by the current player (but still hanging off the old player), so the game would hang when trying to delete it. - Modified re2c so that it doesn't add a date to the file it generates. Thus, if it regenerates a file during a full rebuild, SVN won't see it as a change. Also updated it to 0.10.5. - Fixed: SC_GetString() did not properly terminate sc_String when the last token in the file had no white space after it. Since I could not actually find the problem (it works fine in debug mode and I saw no logic errors), I decided to take this opportunity to reimplement it using an re2c-generated scanner. Now it's 1.6x faster than before and correctness is easier to verify. - Fixed: FMODSoundRenderer::Shutdown() also needs to reset NumChannels. - Added back the Manifest to zdoom.rc for non-VC8 Windows compilers. - Fixed MinGW compilation again. Now it uses the same method as Makefile.linux to find all the source files so that it doesn't need to be manually updated each time source files are added or removed. - Added the SVN revision number to the version string. A new tool is used to obtain this information from the svnversion command and write it into a header file. If you don't have the svn command line tools installed or didn't check it out from the repository, you can still build. I added some rules for this to Makefile.linux, and I assume they work because they do for Makefile.mingw. - Fixed: MIDISong2 did not delete MusHeader in its destructor. SVN r200 (trunk)
2006-06-20 20:30:39 +00:00
$(ZDOOMBIN): ccdv updaterev $(OBJDIR) $(OBJS)
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
$(CCDV) $(CXX) $(LDFLAGS) $(OBJDIR)/autostart.o \
- Fixed: Hexen's ammo display in the status bar cannot be refreshed partially because the background patch has to be drawn always to overwrite the old display. - Fixed: Giving a health item to a non-player caused a crash. - Added a compatibility option to limit deh.MaxHealth to the health bonus. Originally this value wasn't used for health packs. Doing this was a bug in Boom but since there's quite a few maps out there which require Boom's altered behavior it has to be compatibility optioned. - Fixed: The health bonus's max health must be defined by deh.MaxHealth, not deh.MaxSoulsphere. To achieve this deh.MaxHealth's handling had to be altered because it has to default to 100. - Fixed: ZDBSP created incorrect side references with compressed sidedefs and both sidedefs of a linedef being the same. This only affects the external tool because the internal node builder is run after uncompressing the sidedefs. - Added Jim's latest makefile.linux. - Added a consistency check to the PNAMES loader because one crash log indicated that it crashed due to a corrupt PNAMES lump. - Brought back the sector based sound target handling as a compatibility option. This radical change just broke far too many maps that depend on the original behavior. Strife's special AI functions are excluded though because they work better with the new method. SVN r56 (trunk)
2006-04-20 14:21:27 +00:00
$(filter-out %/autostart.o %/autozend.o,$(OBJS)) \
$(OBJDIR)/autozend.o -o $(ZDOOMBIN)
Updated Jim's Makefile.linux. SVN r42 (trunk)
2006-04-13 22:35:56 +00:00
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
$(OBJDIR)/%.o: %.cpp
$(CCDV) $(CXX) $(CXXFLAGS) -o $@ -c $<
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
$(OBJDIR)/%.o: %.c
$(CCDV) $(CC) $(CFLAGS) -o $@ -c $<
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
$(OBJDIR)/%.o: %.nas
$(CCDV) $(NASM) -o $@ $(NASMFLAGS) $<
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
- ClassifyLine now chooses either SSE2 or regular x87 math depending on whether or not SSE2 is available at runtime. Since most of the time is spent in ClassifyLine, using SSE2 in just this one function helps the most. - Nodebuilding is a little faster if we inline PointOnSide. - Changed FEventTree into a regular binary tree, since there just aren't enough nodes inserted into it to make a red-black tree worthwhile. - Added more checks at the start of ClassifyLine so that it has a better chance of avoiding the more complicated checking, and it seems to have paid off with a reasonably modest performance boost. - Added a "vertex map" for ZDBSP's vertex selection. (Think BLOCKMAP for vertices instead of lines.) On large maps, this can result in a very significant speed up. (In one particular map, ZDBSP had previously spent 40% of its time just scanning through all the vertices in the map. Now the time it spends finding vertices is immeasurable.) On small maps, this won't make much of a difference, because the number of vertices to search was so small to begin with. SVN r173 (trunk)
2006-06-06 21:39:08 +00:00
# This file needs special handling so that it actually gets compiled with SSE2 support.
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
$(OBJDIR)/nodebuild_classify_sse2.o: nodebuild_classify_sse2.cpp
$(CCDV) $(CXX) $(CXXFLAGS) -msse2 -mfpmath=sse -c -o $@ $<
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
- Updated the GCC-targeted makefiles to turn off two optimizations that cause fmopl.cpp to compile incorrectly: tree-dominator-opts and tree-fre SVN r734 (trunk)
2008-02-06 00:12:08 +00:00
# This file needs special handling because GCC misoptimizes it otherwise.
$(OBJDIR)/fmopl.o: src/oplsynth/fmopl.cpp
$(CCDV) $(CXX) $(CXXFLAGS) -fno-tree-dominator-opts -fno-tree-fre -c -o $@ $<
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
$(OBJDIR):
- Fixed: Hexen's ammo display in the status bar cannot be refreshed partially because the background patch has to be drawn always to overwrite the old display. - Fixed: Giving a health item to a non-player caused a crash. - Added a compatibility option to limit deh.MaxHealth to the health bonus. Originally this value wasn't used for health packs. Doing this was a bug in Boom but since there's quite a few maps out there which require Boom's altered behavior it has to be compatibility optioned. - Fixed: The health bonus's max health must be defined by deh.MaxHealth, not deh.MaxSoulsphere. To achieve this deh.MaxHealth's handling had to be altered because it has to default to 100. - Fixed: ZDBSP created incorrect side references with compressed sidedefs and both sidedefs of a linedef being the same. This only affects the external tool because the internal node builder is run after uncompressing the sidedefs. - Added Jim's latest makefile.linux. - Added a consistency check to the PNAMES loader because one crash log indicated that it crashed due to a corrupt PNAMES lump. - Brought back the sector based sound target handling as a compatibility option. This radical change just broke far too many maps that depend on the original behavior. Strife's special AI functions are excluded though because they work better with the new method. SVN r56 (trunk)
2006-04-20 14:21:27 +00:00
mkdir $(OBJDIR)
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
toolsandpk3: ccdv tools/makewad/makewad tools/dehsupp/dehsupp tools/xlatcc/xlatcc
- Unlimited the monster pain sounds in Hexen after playing as the Cleric a while and killing centaurs with the flechette. - Fixed: Moving to an old level in a hub caused the old player's inventory to spawn owned by the current player (but still hanging off the old player), so the game would hang when trying to delete it. - Modified re2c so that it doesn't add a date to the file it generates. Thus, if it regenerates a file during a full rebuild, SVN won't see it as a change. Also updated it to 0.10.5. - Fixed: SC_GetString() did not properly terminate sc_String when the last token in the file had no white space after it. Since I could not actually find the problem (it works fine in debug mode and I saw no logic errors), I decided to take this opportunity to reimplement it using an re2c-generated scanner. Now it's 1.6x faster than before and correctness is easier to verify. - Fixed: FMODSoundRenderer::Shutdown() also needs to reset NumChannels. - Added back the Manifest to zdoom.rc for non-VC8 Windows compilers. - Fixed MinGW compilation again. Now it uses the same method as Makefile.linux to find all the source files so that it doesn't need to be manually updated each time source files are added or removed. - Added the SVN revision number to the version string. A new tool is used to obtain this information from the svnversion command and write it into a header file. If you don't have the svn command line tools installed or didn't check it out from the repository, you can still build. I added some rules for this to Makefile.linux, and I assume they work because they do for Makefile.mingw. - Fixed: MIDISong2 did not delete MusHeader in its destructor. SVN r200 (trunk)
2006-06-20 20:30:39 +00:00
$(MAKE) -C wadsrc/
- Updated Jim's Makefile.linux. - Added support for wrapping midtextures vertically. - Since zdoom.wad is now zdoom.pk3, the default mapinfos can use full pathnames. So now they do. - Fixed: The DSimpleCanvas constructor used a pitch too narrow on screens wider than 640 pixels when using a non-AMD processor and the processor's L1 cache line size could not be determined. I think this should fix the issue of weirdly rendered 8 pixel wide borders on the left and right of the screen that some people experienced. - Fixed: The secnodes were never freed. SVN r93 (trunk)
2006-05-09 21:30:31 +00:00
zdoom.pk3: toolsandpk3
ln -sf wadsrc/zdoom.pk3 ./
tools/makewad/makewad:
- Unlimited the monster pain sounds in Hexen after playing as the Cleric a while and killing centaurs with the flechette. - Fixed: Moving to an old level in a hub caused the old player's inventory to spawn owned by the current player (but still hanging off the old player), so the game would hang when trying to delete it. - Modified re2c so that it doesn't add a date to the file it generates. Thus, if it regenerates a file during a full rebuild, SVN won't see it as a change. Also updated it to 0.10.5. - Fixed: SC_GetString() did not properly terminate sc_String when the last token in the file had no white space after it. Since I could not actually find the problem (it works fine in debug mode and I saw no logic errors), I decided to take this opportunity to reimplement it using an re2c-generated scanner. Now it's 1.6x faster than before and correctness is easier to verify. - Fixed: FMODSoundRenderer::Shutdown() also needs to reset NumChannels. - Added back the Manifest to zdoom.rc for non-VC8 Windows compilers. - Fixed MinGW compilation again. Now it uses the same method as Makefile.linux to find all the source files so that it doesn't need to be manually updated each time source files are added or removed. - Added the SVN revision number to the version string. A new tool is used to obtain this information from the svnversion command and write it into a header file. If you don't have the svn command line tools installed or didn't check it out from the repository, you can still build. I added some rules for this to Makefile.linux, and I assume they work because they do for Makefile.mingw. - Fixed: MIDISong2 did not delete MusHeader in its destructor. SVN r200 (trunk)
2006-06-20 20:30:39 +00:00
$(MAKE) -C tools/makewad/
- Updated Jim's Makefile.linux. - Added support for wrapping midtextures vertically. - Since zdoom.wad is now zdoom.pk3, the default mapinfos can use full pathnames. So now they do. - Fixed: The DSimpleCanvas constructor used a pitch too narrow on screens wider than 640 pixels when using a non-AMD processor and the processor's L1 cache line size could not be determined. I think this should fix the issue of weirdly rendered 8 pixel wide borders on the left and right of the screen that some people experienced. - Fixed: The secnodes were never freed. SVN r93 (trunk)
2006-05-09 21:30:31 +00:00
tools/dehsupp/dehsupp:
- Unlimited the monster pain sounds in Hexen after playing as the Cleric a while and killing centaurs with the flechette. - Fixed: Moving to an old level in a hub caused the old player's inventory to spawn owned by the current player (but still hanging off the old player), so the game would hang when trying to delete it. - Modified re2c so that it doesn't add a date to the file it generates. Thus, if it regenerates a file during a full rebuild, SVN won't see it as a change. Also updated it to 0.10.5. - Fixed: SC_GetString() did not properly terminate sc_String when the last token in the file had no white space after it. Since I could not actually find the problem (it works fine in debug mode and I saw no logic errors), I decided to take this opportunity to reimplement it using an re2c-generated scanner. Now it's 1.6x faster than before and correctness is easier to verify. - Fixed: FMODSoundRenderer::Shutdown() also needs to reset NumChannels. - Added back the Manifest to zdoom.rc for non-VC8 Windows compilers. - Fixed MinGW compilation again. Now it uses the same method as Makefile.linux to find all the source files so that it doesn't need to be manually updated each time source files are added or removed. - Added the SVN revision number to the version string. A new tool is used to obtain this information from the svnversion command and write it into a header file. If you don't have the svn command line tools installed or didn't check it out from the repository, you can still build. I added some rules for this to Makefile.linux, and I assume they work because they do for Makefile.mingw. - Fixed: MIDISong2 did not delete MusHeader in its destructor. SVN r200 (trunk)
2006-06-20 20:30:39 +00:00
$(MAKE) -C tools/dehsupp/
- Updated Jim's Makefile.linux. - Added support for wrapping midtextures vertically. - Since zdoom.wad is now zdoom.pk3, the default mapinfos can use full pathnames. So now they do. - Fixed: The DSimpleCanvas constructor used a pitch too narrow on screens wider than 640 pixels when using a non-AMD processor and the processor's L1 cache line size could not be determined. I think this should fix the issue of weirdly rendered 8 pixel wide borders on the left and right of the screen that some people experienced. - Fixed: The secnodes were never freed. SVN r93 (trunk)
2006-05-09 21:30:31 +00:00
tools/xlatcc/xlatcc:
- Unlimited the monster pain sounds in Hexen after playing as the Cleric a while and killing centaurs with the flechette. - Fixed: Moving to an old level in a hub caused the old player's inventory to spawn owned by the current player (but still hanging off the old player), so the game would hang when trying to delete it. - Modified re2c so that it doesn't add a date to the file it generates. Thus, if it regenerates a file during a full rebuild, SVN won't see it as a change. Also updated it to 0.10.5. - Fixed: SC_GetString() did not properly terminate sc_String when the last token in the file had no white space after it. Since I could not actually find the problem (it works fine in debug mode and I saw no logic errors), I decided to take this opportunity to reimplement it using an re2c-generated scanner. Now it's 1.6x faster than before and correctness is easier to verify. - Fixed: FMODSoundRenderer::Shutdown() also needs to reset NumChannels. - Added back the Manifest to zdoom.rc for non-VC8 Windows compilers. - Fixed MinGW compilation again. Now it uses the same method as Makefile.linux to find all the source files so that it doesn't need to be manually updated each time source files are added or removed. - Added the SVN revision number to the version string. A new tool is used to obtain this information from the svnversion command and write it into a header file. If you don't have the svn command line tools installed or didn't check it out from the repository, you can still build. I added some rules for this to Makefile.linux, and I assume they work because they do for Makefile.mingw. - Fixed: MIDISong2 did not delete MusHeader in its destructor. SVN r200 (trunk)
2006-06-20 20:30:39 +00:00
$(MAKE) -C tools/xlatcc/
SVN r51 (trunk)
2006-04-17 13:53:34 +00:00
- Unlimited the monster pain sounds in Hexen after playing as the Cleric a while and killing centaurs with the flechette. - Fixed: Moving to an old level in a hub caused the old player's inventory to spawn owned by the current player (but still hanging off the old player), so the game would hang when trying to delete it. - Modified re2c so that it doesn't add a date to the file it generates. Thus, if it regenerates a file during a full rebuild, SVN won't see it as a change. Also updated it to 0.10.5. - Fixed: SC_GetString() did not properly terminate sc_String when the last token in the file had no white space after it. Since I could not actually find the problem (it works fine in debug mode and I saw no logic errors), I decided to take this opportunity to reimplement it using an re2c-generated scanner. Now it's 1.6x faster than before and correctness is easier to verify. - Fixed: FMODSoundRenderer::Shutdown() also needs to reset NumChannels. - Added back the Manifest to zdoom.rc for non-VC8 Windows compilers. - Fixed MinGW compilation again. Now it uses the same method as Makefile.linux to find all the source files so that it doesn't need to be manually updated each time source files are added or removed. - Added the SVN revision number to the version string. A new tool is used to obtain this information from the svnversion command and write it into a header file. If you don't have the svn command line tools installed or didn't check it out from the repository, you can still build. I added some rules for this to Makefile.linux, and I assume they work because they do for Makefile.mingw. - Fixed: MIDISong2 did not delete MusHeader in its destructor. SVN r200 (trunk)
2006-06-20 20:30:39 +00:00
updaterev: tools/updaterevision/updaterevision
@tools/updaterevision/updaterevision . src/svnrevision.h
tools/updaterevision/updaterevision:
$(MAKE) -C tools/updaterevision
.PHONY : clean cleandeps cleanobjs distclean toolsandpk3 cleantools updaterev
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
SVN r51 (trunk)
2006-04-17 13:53:34 +00:00
clean: cleanobjs
- Fixed: Hexen's ammo display in the status bar cannot be refreshed partially because the background patch has to be drawn always to overwrite the old display. - Fixed: Giving a health item to a non-player caused a crash. - Added a compatibility option to limit deh.MaxHealth to the health bonus. Originally this value wasn't used for health packs. Doing this was a bug in Boom but since there's quite a few maps out there which require Boom's altered behavior it has to be compatibility optioned. - Fixed: The health bonus's max health must be defined by deh.MaxHealth, not deh.MaxSoulsphere. To achieve this deh.MaxHealth's handling had to be altered because it has to default to 100. - Fixed: ZDBSP created incorrect side references with compressed sidedefs and both sidedefs of a linedef being the same. This only affects the external tool because the internal node builder is run after uncompressing the sidedefs. - Added Jim's latest makefile.linux. - Added a consistency check to the PNAMES loader because one crash log indicated that it crashed due to a corrupt PNAMES lump. - Brought back the sector based sound target handling as a compatibility option. This radical change just broke far too many maps that depend on the original behavior. Strife's special AI functions are excluded though because they work better with the new method. SVN r56 (trunk)
2006-04-20 14:21:27 +00:00
rm -f $(ZDOOMDEBUG) $(ZDOOM) $(ZDOOM).map
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
rm -f ccdv
cleantools:
@$(MAKE) -C tools/makewad clean
@$(MAKE) -C tools/dehsupp clean
@$(MAKE) -C tools/xlatcc clean
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
April 20, 2006 (Changes by Graf Zahl) - Fixed: Strife's ending check included destroying the computer - an event that happens before the branch in the story. - Fixed: The overloaded FRandom::Random2 function with mask parameter didn't use its parameter. - Added Jim's latest makefile.linux SVN r60 (trunk)
2006-04-21 16:32:49 +00:00
cleandebug:
rm -f $(ZDOOMDEBUG) $(DEBUGOBJ)/*.o $(DEBUGOBJ)/*.d
-rmdir $(DEBUGOBJ)
cleanrelease:
rm -f $(ZDOOM) $(ZDOOM).map $(RELEASEOBJ)/*.o $(RELEASEOBJ)/*.o
-rmdir $(RELEASEOBJ)
SVN r51 (trunk)
2006-04-17 13:53:34 +00:00
# I could use a recursive delete instead, but that could be dangerous...
distclean: clean cleandeps
April 20, 2006 (Changes by Graf Zahl) - Fixed: Strife's ending check included destroying the computer - an event that happens before the branch in the story. - Fixed: The overloaded FRandom::Random2 function with mask parameter didn't use its parameter. - Added Jim's latest makefile.linux SVN r60 (trunk)
2006-04-21 16:32:49 +00:00
-rmdir $(RELEASEOBJ) $(DEBUGOBJ)
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
cleandeps:
- Fixed: Hexen's ammo display in the status bar cannot be refreshed partially because the background patch has to be drawn always to overwrite the old display. - Fixed: Giving a health item to a non-player caused a crash. - Added a compatibility option to limit deh.MaxHealth to the health bonus. Originally this value wasn't used for health packs. Doing this was a bug in Boom but since there's quite a few maps out there which require Boom's altered behavior it has to be compatibility optioned. - Fixed: The health bonus's max health must be defined by deh.MaxHealth, not deh.MaxSoulsphere. To achieve this deh.MaxHealth's handling had to be altered because it has to default to 100. - Fixed: ZDBSP created incorrect side references with compressed sidedefs and both sidedefs of a linedef being the same. This only affects the external tool because the internal node builder is run after uncompressing the sidedefs. - Added Jim's latest makefile.linux. - Added a consistency check to the PNAMES loader because one crash log indicated that it crashed due to a corrupt PNAMES lump. - Brought back the sector based sound target handling as a compatibility option. This radical change just broke far too many maps that depend on the original behavior. Strife's special AI functions are excluded though because they work better with the new method. SVN r56 (trunk)
2006-04-20 14:21:27 +00:00
rm -f $(RELEASEOBJ)/*.d $(DEBUGOBJ)/*.d
- Added Jim's Makefile.linux; - Changed: Decal scales now use full precision fixed point numbers. - Changed: Keeping impact decals in their own statlist is enough to keep track of them for when one needs to be destroyed. There's no need to maintain a separate list for them. - Fixed: Decal actors did not spread their decals across neighboring walls. - Fixed: Decal groups did not initialize their IDs and could not be reliably used with the decal actor. - Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal() now uses the decal's LeftDistance to calculate its visible location, so it always stays in sync with the wall's vertices. This also lets me dump some code from the polyobjects that maintained the decals' (x, y) coordinates. Also, the decals' x and y information is redundant and can be removed. Doing this revealed a bug with slider decals and horizontal sliding: That is, it didn't work at all. I have opted to simply remove the horizontal sliding support so that I don't have to worry about what happens when a decal slides across the edge of a wall. - Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number. It should be 2.30 fixed point. SVN r35 (trunk)
2006-04-13 02:01:40 +00:00
cleanobjs:
- Fixed: Hexen's ammo display in the status bar cannot be refreshed partially because the background patch has to be drawn always to overwrite the old display. - Fixed: Giving a health item to a non-player caused a crash. - Added a compatibility option to limit deh.MaxHealth to the health bonus. Originally this value wasn't used for health packs. Doing this was a bug in Boom but since there's quite a few maps out there which require Boom's altered behavior it has to be compatibility optioned. - Fixed: The health bonus's max health must be defined by deh.MaxHealth, not deh.MaxSoulsphere. To achieve this deh.MaxHealth's handling had to be altered because it has to default to 100. - Fixed: ZDBSP created incorrect side references with compressed sidedefs and both sidedefs of a linedef being the same. This only affects the external tool because the internal node builder is run after uncompressing the sidedefs. - Added Jim's latest makefile.linux. - Added a consistency check to the PNAMES loader because one crash log indicated that it crashed due to a corrupt PNAMES lump. - Brought back the sector based sound target handling as a compatibility option. This radical change just broke far too many maps that depend on the original behavior. Strife's special AI functions are excluded though because they work better with the new method. SVN r56 (trunk)
2006-04-20 14:21:27 +00:00
rm -f $(RELEASEOBJ)/*.o $(DEBUGOBJ)/*.o
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
ccdv: ccdv-posix.c
@gcc -Os -s ccdv-posix.c -o ccdv
- Unlimited the monster pain sounds in Hexen after playing as the Cleric a while and killing centaurs with the flechette. - Fixed: Moving to an old level in a hub caused the old player's inventory to spawn owned by the current player (but still hanging off the old player), so the game would hang when trying to delete it. - Modified re2c so that it doesn't add a date to the file it generates. Thus, if it regenerates a file during a full rebuild, SVN won't see it as a change. Also updated it to 0.10.5. - Fixed: SC_GetString() did not properly terminate sc_String when the last token in the file had no white space after it. Since I could not actually find the problem (it works fine in debug mode and I saw no logic errors), I decided to take this opportunity to reimplement it using an re2c-generated scanner. Now it's 1.6x faster than before and correctness is easier to verify. - Fixed: FMODSoundRenderer::Shutdown() also needs to reset NumChannels. - Added back the Manifest to zdoom.rc for non-VC8 Windows compilers. - Fixed MinGW compilation again. Now it uses the same method as Makefile.linux to find all the source files so that it doesn't need to be manually updated each time source files are added or removed. - Added the SVN revision number to the version string. A new tool is used to obtain this information from the svnversion command and write it into a header file. If you don't have the svn command line tools installed or didn't check it out from the repository, you can still build. I added some rules for this to Makefile.linux, and I assume they work because they do for Makefile.mingw. - Fixed: MIDISong2 did not delete MusHeader in its destructor. SVN r200 (trunk)
2006-06-20 20:30:39 +00:00
ifeq (,$(findstring $(MAKECMDGOALS),clean cleandeps cleanobjs distclean toolsandpk3 cleantools updaterev))
- Modified Makefile.linux to use ccdv for easier error spotting and to make the dependancy files at the same time it makes the object files. SVN r180 (trunk)
2006-06-08 02:43:35 +00:00
-include $(DEPS)
- Fixed: If you called the FString assignment operator that accepts a const char * with a string inside its buffer, it released the buffer before copying the string. - Added a new FString constructor that creates the string from a lump. - Fixed: G_DoReborn() calls G_InitNew() with mapname set to level.mapname. G_InitNew() then copies it onto level.mapname, which is undefined behavior (although it does work as we want it to). - Modified FMemLump to store its data using FString. That class provides a convenient method of storing reference counted data, so now FMemLump doesn't need to muck about sneakily using const_casts and possibly tricking its users into thinking that an old one is still valid after being assigned to a new one. - Fixed: The IMGZ, PNG, PCX, and JPEG loaders assumed the files were large enough for their headers without actually checking. SVN r463 (trunk)
2007-01-25 04:02:06 +00:00
endif