gzdoom/jpeg-6b/jdcolor.c

/*
* jdcolor.c
*
* Copyright (C) 1991-1997, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains output colorspace conversion routines.
*/

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"


/* Private subobject */

typedef struct {
	struct jpeg_color_deconverter pub; /* public fields */

	/* Private state for YCC->RGB conversion */
	int * Cr_r_tab;		/* => table for Cr to R conversion */
	int * Cb_b_tab;		/* => table for Cb to B conversion */
	INT32 * Cr_g_tab;		/* => table for Cr to G conversion */
	INT32 * Cb_g_tab;		/* => table for Cb to G conversion */
} my_color_deconverter;

typedef my_color_deconverter * my_cconvert_ptr;


/**************** YCbCr -> RGB conversion: most common case **************/

/*
* YCbCr is defined per CCIR 601-1, except that Cb and Cr are
* normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
* The conversion equations to be implemented are therefore
*	R = Y                + 1.40200 * Cr
*	G = Y - 0.34414 * Cb - 0.71414 * Cr
*	B = Y + 1.77200 * Cb
* where Cb and Cr represent the incoming values less CENTERJSAMPLE.
* (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
*
* To avoid floating-point arithmetic, we represent the fractional constants
* as integers scaled up by 2^16 (about 4 digits precision); we have to divide
* the products by 2^16, with appropriate rounding, to get the correct answer.
* Notice that Y, being an integral input, does not contribute any fraction
* so it need not participate in the rounding.
*
* For even more speed, we avoid doing any multiplications in the inner loop
* by precalculating the constants times Cb and Cr for all possible values.
* For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
* for 12-bit samples it is still acceptable.  It's not very reasonable for
* 16-bit samples, but if you want lossless storage you shouldn't be changing
* colorspace anyway.
* The Cr=>R and Cb=>B values can be rounded to integers in advance; the
* values for the G calculation are left scaled up, since we must add them
* together before rounding.
*/

#define SCALEBITS	16	/* speediest right-shift on some machines */
#define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
#define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))


/*
* Initialize tables for YCC->RGB colorspace conversion.
*/

LOCAL(void)
build_ycc_rgb_table (j_decompress_ptr cinfo)
{
	my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
	int i;
	INT32 x;
	SHIFT_TEMPS

		cconvert->Cr_r_tab = (int *)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		(MAXJSAMPLE+1) * SIZEOF(int));
	cconvert->Cb_b_tab = (int *)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		(MAXJSAMPLE+1) * SIZEOF(int));
	cconvert->Cr_g_tab = (INT32 *)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		(MAXJSAMPLE+1) * SIZEOF(INT32));
	cconvert->Cb_g_tab = (INT32 *)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		(MAXJSAMPLE+1) * SIZEOF(INT32));

	for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
		/* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
		/* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
		/* Cr=>R value is nearest int to 1.40200 * x */
		cconvert->Cr_r_tab[i] = (int)
			RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
		/* Cb=>B value is nearest int to 1.77200 * x */
		cconvert->Cb_b_tab[i] = (int)
			RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
		/* Cr=>G value is scaled-up -0.71414 * x */
		cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x;
		/* Cb=>G value is scaled-up -0.34414 * x */
		/* We also add in ONE_HALF so that need not do it in inner loop */
		cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
	}
}


/*
* Convert some rows of samples to the output colorspace.
*
* Note that we change from noninterleaved, one-plane-per-component format
* to interleaved-pixel format.  The output buffer is therefore three times
* as wide as the input buffer.
* A starting row offset is provided only for the input buffer.  The caller
* can easily adjust the passed output_buf value to accommodate any row
* offset required on that side.
*/

METHODDEF(void)
ycc_rgb_convert (j_decompress_ptr cinfo,
				 JSAMPIMAGE input_buf, JDIMENSION input_row,
				 JSAMPARRAY output_buf, int num_rows)
{
	my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
	register int y, cb, cr;
	register JSAMPROW outptr;
	register JSAMPROW inptr0, inptr1, inptr2;
	register JDIMENSION col;
	JDIMENSION num_cols = cinfo->output_width;
	/* copy these pointers into registers if possible */
	register JSAMPLE * range_limit = cinfo->sample_range_limit;
	register int * Crrtab = cconvert->Cr_r_tab;
	register int * Cbbtab = cconvert->Cb_b_tab;
	register INT32 * Crgtab = cconvert->Cr_g_tab;
	register INT32 * Cbgtab = cconvert->Cb_g_tab;
	SHIFT_TEMPS

		while (--num_rows >= 0) {
			inptr0 = input_buf[0][input_row];
			inptr1 = input_buf[1][input_row];
			inptr2 = input_buf[2][input_row];
			input_row++;
			outptr = *output_buf++;
			for (col = 0; col < num_cols; col++) {
				y  = GETJSAMPLE(inptr0[col]);
				cb = GETJSAMPLE(inptr1[col]);
				cr = GETJSAMPLE(inptr2[col]);
				/* Range-limiting is essential due to noise introduced by DCT losses. */
				outptr[RGB_RED] =   range_limit[y + Crrtab[cr]];
				outptr[RGB_GREEN] = range_limit[y +
					((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
					SCALEBITS))];
				outptr[RGB_BLUE] =  range_limit[y + Cbbtab[cb]];
				outptr += RGB_PIXELSIZE;
			}
		}
}


/**************** Cases other than YCbCr -> RGB **************/


/*
* Color conversion for no colorspace change: just copy the data,
* converting from separate-planes to interleaved representation.
*/

METHODDEF(void)
null_convert (j_decompress_ptr cinfo,
			  JSAMPIMAGE input_buf, JDIMENSION input_row,
			  JSAMPARRAY output_buf, int num_rows)
{
	register JSAMPROW inptr, outptr;
	register JDIMENSION count;
	register int num_components = cinfo->num_components;
	JDIMENSION num_cols = cinfo->output_width;
	int ci;

	while (--num_rows >= 0) {
		for (ci = 0; ci < num_components; ci++) {
			inptr = input_buf[ci][input_row];
			outptr = output_buf[0] + ci;
			for (count = num_cols; count > 0; count--) {
				*outptr = *inptr++;	/* needn't bother with GETJSAMPLE() here */
				outptr += num_components;
			}
		}
		input_row++;
		output_buf++;
	}
}


/*
* Color conversion for grayscale: just copy the data.
* This also works for YCbCr -> grayscale conversion, in which
* we just copy the Y (luminance) component and ignore chrominance.
*/

METHODDEF(void)
grayscale_convert (j_decompress_ptr cinfo,
				   JSAMPIMAGE input_buf, JDIMENSION input_row,
				   JSAMPARRAY output_buf, int num_rows)
{
	jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0,
		num_rows, cinfo->output_width);
}


/*
* Convert grayscale to RGB: just duplicate the graylevel three times.
* This is provided to support applications that don't want to cope
* with grayscale as a separate case.
*/

METHODDEF(void)
gray_rgb_convert (j_decompress_ptr cinfo,
				  JSAMPIMAGE input_buf, JDIMENSION input_row,
				  JSAMPARRAY output_buf, int num_rows)
{
	register JSAMPROW inptr, outptr;
	register JDIMENSION col;
	JDIMENSION num_cols = cinfo->output_width;

	while (--num_rows >= 0) {
		inptr = input_buf[0][input_row++];
		outptr = *output_buf++;
		for (col = 0; col < num_cols; col++) {
			/* We can dispense with GETJSAMPLE() here */
			outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
			outptr += RGB_PIXELSIZE;
		}
	}
}


/*
* Adobe-style YCCK->CMYK conversion.
* We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same
* conversion as above, while passing K (black) unchanged.
* We assume build_ycc_rgb_table has been called.
*/

METHODDEF(void)
ycck_cmyk_convert (j_decompress_ptr cinfo,
				   JSAMPIMAGE input_buf, JDIMENSION input_row,
				   JSAMPARRAY output_buf, int num_rows)
{
	my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
	register int y, cb, cr;
	register JSAMPROW outptr;
	register JSAMPROW inptr0, inptr1, inptr2, inptr3;
	register JDIMENSION col;
	JDIMENSION num_cols = cinfo->output_width;
	/* copy these pointers into registers if possible */
	register JSAMPLE * range_limit = cinfo->sample_range_limit;
	register int * Crrtab = cconvert->Cr_r_tab;
	register int * Cbbtab = cconvert->Cb_b_tab;
	register INT32 * Crgtab = cconvert->Cr_g_tab;
	register INT32 * Cbgtab = cconvert->Cb_g_tab;
	SHIFT_TEMPS

		while (--num_rows >= 0) {
			inptr0 = input_buf[0][input_row];
			inptr1 = input_buf[1][input_row];
			inptr2 = input_buf[2][input_row];
			inptr3 = input_buf[3][input_row];
			input_row++;
			outptr = *output_buf++;
			for (col = 0; col < num_cols; col++) {
				y  = GETJSAMPLE(inptr0[col]);
				cb = GETJSAMPLE(inptr1[col]);
				cr = GETJSAMPLE(inptr2[col]);
				/* Range-limiting is essential due to noise introduced by DCT losses. */
				outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])];	/* red */
				outptr[1] = range_limit[MAXJSAMPLE - (y +			/* green */
					((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
					SCALEBITS)))];
				outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])];	/* blue */
				/* K passes through unchanged */
				outptr[3] = inptr3[col];	/* don't need GETJSAMPLE here */
				outptr += 4;
			}
		}
}


/*
* Empty method for start_pass.
*/

METHODDEF(void)
start_pass_dcolor (j_decompress_ptr cinfo)
{
	/* no work needed */
}


/*
* Module initialization routine for output colorspace conversion.
*/

GLOBAL(void)
jinit_color_deconverter (j_decompress_ptr cinfo)
{
	my_cconvert_ptr cconvert;
	int ci;

	cconvert = (my_cconvert_ptr)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		SIZEOF(my_color_deconverter));
	cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert;
	cconvert->pub.start_pass = start_pass_dcolor;

	/* Make sure num_components agrees with jpeg_color_space */
	switch (cinfo->jpeg_color_space) {
  case JCS_GRAYSCALE:
	  if (cinfo->num_components != 1)
		  ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
	  break;

  case JCS_RGB:
  case JCS_YCbCr:
	  if (cinfo->num_components != 3)
		  ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
	  break;

  case JCS_CMYK:
  case JCS_YCCK:
	  if (cinfo->num_components != 4)
		  ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
	  break;

  default:			/* JCS_UNKNOWN can be anything */
	  if (cinfo->num_components < 1)
		  ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
	  break;
	}

	/* Set out_color_components and conversion method based on requested space.
	* Also clear the component_needed flags for any unused components,
	* so that earlier pipeline stages can avoid useless computation.
	*/

	switch (cinfo->out_color_space) {
  case JCS_GRAYSCALE:
	  cinfo->out_color_components = 1;
	  if (cinfo->jpeg_color_space == JCS_GRAYSCALE ||
		  cinfo->jpeg_color_space == JCS_YCbCr) {
			  cconvert->pub.color_convert = grayscale_convert;
			  /* For color->grayscale conversion, only the Y (0) component is needed */
			  for (ci = 1; ci < cinfo->num_components; ci++)
				  cinfo->comp_info[ci].component_needed = FALSE;
	  } else
		  ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
	  break;

  case JCS_RGB:
	  cinfo->out_color_components = RGB_PIXELSIZE;
	  if (cinfo->jpeg_color_space == JCS_YCbCr) {
		  cconvert->pub.color_convert = ycc_rgb_convert;
		  build_ycc_rgb_table(cinfo);
	  } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
		  cconvert->pub.color_convert = gray_rgb_convert;
	  } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) {
		  cconvert->pub.color_convert = null_convert;
	  } else
		  ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
	  break;

  case JCS_CMYK:
	  cinfo->out_color_components = 4;
	  if (cinfo->jpeg_color_space == JCS_YCCK) {
		  cconvert->pub.color_convert = ycck_cmyk_convert;
		  build_ycc_rgb_table(cinfo);
	  } else if (cinfo->jpeg_color_space == JCS_CMYK) {
		  cconvert->pub.color_convert = null_convert;
	  } else
		  ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
	  break;

  default:
	  /* Permit null conversion to same output space */
	  if (cinfo->out_color_space == cinfo->jpeg_color_space) {
		  cinfo->out_color_components = cinfo->num_components;
		  cconvert->pub.color_convert = null_convert;
	  } else			/* unsupported non-null conversion */
		  ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
	  break;
	}

	cinfo->output_components = cinfo->out_color_components;
}