gzdoom-gles/Makefile.mingw
Randy Heit 2b721975dd VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support
for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update
your SDKs. GCC users, be sure to do a "make cleandep && make clean" before
building, or you will likely get inexplicable errors.

- Fixed: If you wanted to make cleandep with MinGW, you had to specifically
  specify Makefile.mingw as the makefile to use.
- Added a normalizer to the OPL synth. It helped bring up the volume a little,
  but not nearly as much as I would have liked.
- Removed MIDI Mapper references. It doesn't work with the stream API, and
  it doesn't really exist on NT kernels, either.
- Reworked music volume: Except for MIDI, all music volume is controlled
  through GSnd and not at the individual song level.
- Removed the mididevice global variable.
- Removed snd_midivolume. Now that all music uses a linear volume scale,
  there's no need for two separate music volume controls.
- Increased snd_samplerate default up to 48000.
- Added snd_format, defaulting to "PCM-16".
- Added snd_speakermode, defaulting to "Auto".
- Replaced snd_fpu with snd_resampler, defaulting to "Linear".
- Bumped the snd_channels default up from a pitiful 12 to 32.
- Changed snd_3d default to true. The new cvar snd_hw3d determines if
  hardware 3D support is used and default to false.
- Removed the libFLAC source, since FMOD Ex has native FLAC support.
- Removed the altsound code, since it was terribly gimped in comparison to
  the FMOD code. It's original purpose was to have been as a springboard for
  writing a non-FMOD sound system for Unix-y systems, but that never
  happened.
- Finished preliminary FMOD Ex support.


SVN r789 (trunk)
2008-03-09 03:13:49 +00:00

150 lines
4.6 KiB
Text

# This makefile makes zdoom(d).exe only.
# Makefile.mgw builds this plus everything else.
# Sub-makefile autogenerated by premake
# And then tweaked by hand
# Where did you install the FMOD API to? Change this line so that the build process can find it.
FMODDIR = "e:/program files (x86)/FMOD SoundSystem/FMOD Programmers API Win32"
ifeq ($(findstring msys,$(shell sh --version 2>nul)),msys)
WINCMD=0
else
WINCMD=1
endif
CC ?= gcc
CXX ?= g++
CONFIG ?= Release
OPTLEVEL ?= 2
ARCH_TYPE ?= pentium
TUNE_TYPE ?= i686
RELEASETARGET ?= zdoomgcc.exe
DEBUGTARGET ?= zdoomgccd.exe
DEBUGOBJDIR ?= debugobj
RELEASEOBJDIR ?= releaseobj
CCDV ?= @ccdv
RE2C = tools/re2c/re2c
CPPFLAGS = -DWIN32 -D_WIN32 -D_WINDOWS -DHAVE_STRUPR -DHAVE_FILELENGTH -DI_DO_NOT_LIKE_BIG_DOWNLOADS -D__forceinline=inline -MMD -Izlib -IFLAC -Ijpeg-6b -Isrc -Isrc/win32 -Isrc/g_doom -Isrc/g_heretic -Isrc/g_hexen -Isrc/g_raven -Isrc/g_strife -Isrc/g_shared -Isrc/oplsynth -Isrc/sound -Isrc/textures -Isrc/thingdef
LDFLAGS += zlib/libz.a jpeg-6b/libjpeg.a -lfmodex -lwsock32 -lwinmm -lddraw -ldsound -ldxguid -ldinput8 -lole32 -luser32 -lgdi32 -lcomctl32 -lcomdlg32 -lsetupapi -lws2_32 -Wl,--subsystem,windows
ifdef FMODDIR
CPPFLAGS += -I$(FMODDIR)/api/inc
LDFLAGS += -L$(FMODDIR)/api/lib
endif
CFLAGS += -fno-strict-aliasing
ifeq ($(CONFIG),Debug)
OBJDIR = $(DEBUGOBJDIR)
CFLAGS += $(CPPFLAGS) -Wall -Wno-unused -g3
CPPFLAGS += -D_DEBUG
CXXFLAGS = $(CFLAGS)
TARGET = $(DEBUGTARGET)
endif
ifeq ($(CONFIG),Release)
OBJDIR = $(RELEASEOBJDIR)
CFLAGS += $(CPPFLAGS) -march=$(ARCH_TYPE) -mtune=$(TUNE_TYPE) -Wall -Wno-unused -O$(OPTLEVEL) -fomit-frame-pointer -pipe
CFLAGS += -ffunction-sections -fno-rtti
CPPFLAGS += -DNDEBUG
CXXFLAGS = $(CFLAGS)
LDFLAGS += -s -Wl,-Map=zdoomgcc.map -Wl,--gc-sections
TARGET = $(RELEASETARGET)
endif
SRCDIRS = src/ $(addprefix src/,g_doom/ g_heretic/ g_hexen/ g_raven/ g_shared/ g_strife/ oplsynth/ sound/ win32/ textures/ thingdef/)
VPATH = $(SRCDIRS)
CPPSRCS = $(wildcard $(addsuffix *.cpp,$(SRCDIRS)))
CSRCS = $(wildcard $(addsuffix *.c,$(SRCDIRS)))
RCSRCS = $(wildcard $(addsuffix *.rc,$(SRCDIRS)))
ifdef NOASM
CFLAGS += -DNOASM
else
ASRCS = $(wildcard src/*.nas)
CFLAGS += -DUSEASM=1
endif
SRCS = $(CSRCS) $(CPPSRCS) $(ASRCS)
CPPOBJFILES = $(notdir $(CPPSRCS:%.cpp=%.o))
COBJFILES = $(notdir $(CSRCS:%.c=%.o))
# win32/wrappers.nas should be built *only* for Visual C++ 2005 to enable execution on Windows 95
AOBJFILES = $(filter-out %/wrappers.o,$(notdir $(ASRCS:%.nas=%.o)))
RCOBJFILES = $(notdir $(RCSRCS:%.rc=%.o))
COBJS = $(addprefix $(OBJDIR)/,$(CPPOBJFILES) $(COBJFILES) $(RCOBJFILES))
DEPS = $(patsubst %.o,%.d,$(COBJS))
UNORDEREDOBJS = $(addprefix $(OBJDIR)/,$(AOBJFILES)) $(COBJS)
OBJS = $(OBJDIR)/autostart.o $(filter-out %/autostart.o %/autozend.o,$(UNORDEREDOBJS)) $(OBJDIR)/autozend.o
all: $(TARGET)
# This file needs special handling so that it actually gets compiled with SSE2 support.
$(OBJDIR)/nodebuild_classify_sse2.o: src/nodebuild_classify_sse2.cpp
$(CCDV) $(CXX) $(CXXFLAGS) -msse2 -mfpmath=sse -c -o $@ $<
# This file needs special handling because GCC misoptimizes it otherwise.
$(OBJDIR)/fmopl.o: src/oplsynth/fmopl.cpp
$(CCDV) $(CXX) $(CXXFLAGS) -fno-tree-dominator-opts -fno-tree-fre -c -o $@ $<
src/sc_man_scanner.h: src/sc_man_scanner.re
$(CCDV) $(RE2C) -s -o $@ $<
$(OBJDIR)/%.o : %.cpp
$(CCDV) $(CXX) $(CXXFLAGS) -o $@ -c $<
$(OBJDIR)/%.o : %.nas
$(CCDV) nasm -o $@ -f win32 $<
@tools/fixrtext/fixrtext $@
$(OBJDIR)/%.o : %.rc
$(CCDV) windres --include-dir=src/win32 -o $@ -i $<
$(TARGET): testobjdir updaterev $(OBJS)
$(CCDV) $(CXX) -o $@ $(OBJS) $(LDFLAGS)
ifeq (1,$(WINCMD))
clean:
-del /q /f $(RELEASETARGET) 2>nul
-del /q /f $(DEBUGTARGET) 2>nul
-del /q /f $(DEBUGOBJDIR) 2>nul
-del /q /f $(RELEASEOBJDIR) 2>nul
cleandep:
-del /q /f $(DEBUGOBJDIR)\*.d 2>nul
-del /q /f $(RELEASEOBJDIR)\*.d 2>nul
else
clean:
rm -f $(RELEASETARGET)
rm -f $(DEBUGTARGET)
rm -fr $(DEBUGOBJDIR)
rm -fr $(RELEASEOBJDIR)
cleandep:
rm -f $(DEBUGOBJDIR)/*.d
rm -f $(RELEASEOBJDIR)/*.d
endif
testobjdir:
ifeq (1,$(WINCMD))
-@if not exist $(OBJDIR) mkdir $(OBJDIR)
else
-@if [ ! -e $(OBJDIR) ]; then mkdir $(OBJDIR); fi
endif
updaterev: tools/updaterevision/updaterevision.exe
@tools/updaterevision/updaterevision . src/svnrevision.h
tools/updaterevision/updaterevision.exe:
$(MAKE) -C tools/updaterevision
ifeq (,$(findstring $(MAKECMDGOALS),clean cleandep updaterev))
-include $(DEPS)
endif
.PHONY: clean all updaterev testobjdir cleandep