gzdoom-gles/jpeg-6b/jdphuff.c

/*
* jdphuff.c
*
* Copyright (C) 1995-1997, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains Huffman entropy decoding routines for progressive JPEG.
*
* Much of the complexity here has to do with supporting input suspension.
* If the data source module demands suspension, we want to be able to back
* up to the start of the current MCU.  To do this, we copy state variables
* into local working storage, and update them back to the permanent
* storage only upon successful completion of an MCU.
*/

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"
#include "jdhuff.h"		/* Declarations shared with jdhuff.c */


#ifdef D_PROGRESSIVE_SUPPORTED

/*
* Expanded entropy decoder object for progressive Huffman decoding.
*
* The savable_state subrecord contains fields that change within an MCU,
* but must not be updated permanently until we complete the MCU.
*/

typedef struct {
	unsigned int EOBRUN;			/* remaining EOBs in EOBRUN */
	int last_dc_val[MAX_COMPS_IN_SCAN];	/* last DC coef for each component */
} savable_state;

/* This macro is to work around compilers with missing or broken
* structure assignment.  You'll need to fix this code if you have
* such a compiler and you change MAX_COMPS_IN_SCAN.
*/

#ifndef NO_STRUCT_ASSIGN
#define ASSIGN_STATE(dest,src)  ((dest) = (src))
#else
#if MAX_COMPS_IN_SCAN == 4
#define ASSIGN_STATE(dest,src)  \
	((dest).EOBRUN = (src).EOBRUN, \
	(dest).last_dc_val[0] = (src).last_dc_val[0], \
	(dest).last_dc_val[1] = (src).last_dc_val[1], \
	(dest).last_dc_val[2] = (src).last_dc_val[2], \
	(dest).last_dc_val[3] = (src).last_dc_val[3])
#endif
#endif


typedef struct {
	struct jpeg_entropy_decoder pub; /* public fields */

	/* These fields are loaded into local variables at start of each MCU.
	* In case of suspension, we exit WITHOUT updating them.
	*/
	bitread_perm_state bitstate;	/* Bit buffer at start of MCU */
	savable_state saved;		/* Other state at start of MCU */

	/* These fields are NOT loaded into local working state. */
	unsigned int restarts_to_go;	/* MCUs left in this restart interval */

	/* Pointers to derived tables (these workspaces have image lifespan) */
	d_derived_tbl * derived_tbls[NUM_HUFF_TBLS];

	d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */
} phuff_entropy_decoder;

typedef phuff_entropy_decoder * phuff_entropy_ptr;

/* Forward declarations */
METHODDEF(boolean) decode_mcu_DC_first JPP((j_decompress_ptr cinfo,
										   JBLOCKROW *MCU_data));
METHODDEF(boolean) decode_mcu_AC_first JPP((j_decompress_ptr cinfo,
										   JBLOCKROW *MCU_data));
METHODDEF(boolean) decode_mcu_DC_refine JPP((j_decompress_ptr cinfo,
											JBLOCKROW *MCU_data));
METHODDEF(boolean) decode_mcu_AC_refine JPP((j_decompress_ptr cinfo,
											JBLOCKROW *MCU_data));


/*
* Initialize for a Huffman-compressed scan.
*/

METHODDEF(void)
start_pass_phuff_decoder (j_decompress_ptr cinfo)
{
	phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
	boolean is_DC_band, bad;
	int ci, coefi, tbl;
	int *coef_bit_ptr;
	jpeg_component_info * compptr;

	is_DC_band = (cinfo->Ss == 0);

	/* Validate scan parameters */
	bad = FALSE;
	if (is_DC_band) {
		if (cinfo->Se != 0)
			bad = TRUE;
	} else {
		/* need not check Ss/Se < 0 since they came from unsigned bytes */
		if (cinfo->Ss > cinfo->Se || cinfo->Se >= DCTSIZE2)
			bad = TRUE;
		/* AC scans may have only one component */
		if (cinfo->comps_in_scan != 1)
			bad = TRUE;
	}
	if (cinfo->Ah != 0) {
		/* Successive approximation refinement scan: must have Al = Ah-1. */
		if (cinfo->Al != cinfo->Ah-1)
			bad = TRUE;
	}
	if (cinfo->Al > 13)		/* need not check for < 0 */
		bad = TRUE;
	/* Arguably the maximum Al value should be less than 13 for 8-bit precision,
	* but the spec doesn't say so, and we try to be liberal about what we
	* accept.  Note: large Al values could result in out-of-range DC
	* coefficients during early scans, leading to bizarre displays due to
	* overflows in the IDCT math.  But we won't crash.
	*/
	if (bad)
		ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
		cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
	/* Update progression status, and verify that scan order is legal.
	* Note that inter-scan inconsistencies are treated as warnings
	* not fatal errors ... not clear if this is right way to behave.
	*/
	for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
		int cindex = cinfo->cur_comp_info[ci]->component_index;
		coef_bit_ptr = & cinfo->coef_bits[cindex][0];
		if (!is_DC_band && coef_bit_ptr[0] < 0) /* AC without prior DC scan */
			WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0);
		for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) {
			int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi];
			if (cinfo->Ah != expected)
				WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi);
			coef_bit_ptr[coefi] = cinfo->Al;
		}
	}

	/* Select MCU decoding routine */
	if (cinfo->Ah == 0) {
		if (is_DC_band)
			entropy->pub.decode_mcu = decode_mcu_DC_first;
		else
			entropy->pub.decode_mcu = decode_mcu_AC_first;
	} else {
		if (is_DC_band)
			entropy->pub.decode_mcu = decode_mcu_DC_refine;
		else
			entropy->pub.decode_mcu = decode_mcu_AC_refine;
	}

	for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
		compptr = cinfo->cur_comp_info[ci];
		/* Make sure requested tables are present, and compute derived tables.
		* We may build same derived table more than once, but it's not expensive.
		*/
		if (is_DC_band) {
			if (cinfo->Ah == 0) {	/* DC refinement needs no table */
				tbl = compptr->dc_tbl_no;
				jpeg_make_d_derived_tbl(cinfo, TRUE, tbl,
					& entropy->derived_tbls[tbl]);
			}
		} else {
			tbl = compptr->ac_tbl_no;
			jpeg_make_d_derived_tbl(cinfo, FALSE, tbl,
				& entropy->derived_tbls[tbl]);
			/* remember the single active table */
			entropy->ac_derived_tbl = entropy->derived_tbls[tbl];
		}
		/* Initialize DC predictions to 0 */
		entropy->saved.last_dc_val[ci] = 0;
	}

	/* Initialize bitread state variables */
	entropy->bitstate.bits_left = 0;
	entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
	entropy->pub.insufficient_data = FALSE;

	/* Initialize private state variables */
	entropy->saved.EOBRUN = 0;

	/* Initialize restart counter */
	entropy->restarts_to_go = cinfo->restart_interval;
}


/*
* Figure F.12: extend sign bit.
* On some machines, a shift and add will be faster than a table lookup.
*/

#ifdef AVOID_TABLES

#define HUFF_EXTEND(x,s)  ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x))

#else

#define HUFF_EXTEND(x,s)  ((x) < extend_test[s] ? (x) + extend_offset[s] : (x))

static const int extend_test[16] =   /* entry n is 2**(n-1) */
{ 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 };

static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */
{ 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1,
((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1,
((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1,
((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 };

#endif /* AVOID_TABLES */


/*
* Check for a restart marker & resynchronize decoder.
* Returns FALSE if must suspend.
*/

LOCAL(boolean)
process_restart (j_decompress_ptr cinfo)
{
	phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
	int ci;

	/* Throw away any unused bits remaining in bit buffer; */
	/* include any full bytes in next_marker's count of discarded bytes */
	cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
	entropy->bitstate.bits_left = 0;

	/* Advance past the RSTn marker */
	if (! (*cinfo->marker->read_restart_marker) (cinfo))
		return FALSE;

	/* Re-initialize DC predictions to 0 */
	for (ci = 0; ci < cinfo->comps_in_scan; ci++)
		entropy->saved.last_dc_val[ci] = 0;
	/* Re-init EOB run count, too */
	entropy->saved.EOBRUN = 0;

	/* Reset restart counter */
	entropy->restarts_to_go = cinfo->restart_interval;

	/* Reset out-of-data flag, unless read_restart_marker left us smack up
	* against a marker.  In that case we will end up treating the next data
	* segment as empty, and we can avoid producing bogus output pixels by
	* leaving the flag set.
	*/
	if (cinfo->unread_marker == 0)
		entropy->pub.insufficient_data = FALSE;

	return TRUE;
}


/*
* Huffman MCU decoding.
* Each of these routines decodes and returns one MCU's worth of
* Huffman-compressed coefficients. 
* The coefficients are reordered from zigzag order into natural array order,
* but are not dequantized.
*
* The i'th block of the MCU is stored into the block pointed to by
* MCU_data[i].  WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER.
*
* We return FALSE if data source requested suspension.  In that case no
* changes have been made to permanent state.  (Exception: some output
* coefficients may already have been assigned.  This is harmless for
* spectral selection, since we'll just re-assign them on the next call.
* Successive approximation AC refinement has to be more careful, however.)
*/

/*
* MCU decoding for DC initial scan (either spectral selection,
* or first pass of successive approximation).
*/

METHODDEF(boolean)
decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
{   
	phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
	int Al = cinfo->Al;
	register int s, r;
	int blkn, ci;
	JBLOCKROW block;
	BITREAD_STATE_VARS;
	savable_state state;
	d_derived_tbl * tbl;
	jpeg_component_info * compptr;

	/* Process restart marker if needed; may have to suspend */
	if (cinfo->restart_interval) {
		if (entropy->restarts_to_go == 0)
			if (! process_restart(cinfo))
				return FALSE;
	}

	/* If we've run out of data, just leave the MCU set to zeroes.
	* This way, we return uniform gray for the remainder of the segment.
	*/
	if (! entropy->pub.insufficient_data) {

		/* Load up working state */
		BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
		ASSIGN_STATE(state, entropy->saved);

		/* Outer loop handles each block in the MCU */

		for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
			block = MCU_data[blkn];
			ci = cinfo->MCU_membership[blkn];
			compptr = cinfo->cur_comp_info[ci];
			tbl = entropy->derived_tbls[compptr->dc_tbl_no];

			/* Decode a single block's worth of coefficients */

			/* Section F.2.2.1: decode the DC coefficient difference */
			HUFF_DECODE(s, br_state, tbl, return FALSE, label1);
			if (s) {
				CHECK_BIT_BUFFER(br_state, s, return FALSE);
				r = GET_BITS(s);
				s = HUFF_EXTEND(r, s);
			}

			/* Convert DC difference to actual value, update last_dc_val */
			s += state.last_dc_val[ci];
			state.last_dc_val[ci] = s;
			/* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */
			(*block)[0] = (JCOEF) (s << Al);
		}

		/* Completed MCU, so update state */
		BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
		ASSIGN_STATE(entropy->saved, state);
	}

	/* Account for restart interval (no-op if not using restarts) */
	entropy->restarts_to_go--;

	return TRUE;
}


/*
* MCU decoding for AC initial scan (either spectral selection,
* or first pass of successive approximation).
*/

METHODDEF(boolean)
decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
{   
	phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
	int Se = cinfo->Se;
	int Al = cinfo->Al;
	register int s, k, r;
	unsigned int EOBRUN;
	JBLOCKROW block;
	BITREAD_STATE_VARS;
	d_derived_tbl * tbl;

	/* Process restart marker if needed; may have to suspend */
	if (cinfo->restart_interval) {
		if (entropy->restarts_to_go == 0)
			if (! process_restart(cinfo))
				return FALSE;
	}

	/* If we've run out of data, just leave the MCU set to zeroes.
	* This way, we return uniform gray for the remainder of the segment.
	*/
	if (! entropy->pub.insufficient_data) {

		/* Load up working state.
		* We can avoid loading/saving bitread state if in an EOB run.
		*/
		EOBRUN = entropy->saved.EOBRUN;	/* only part of saved state we need */

		/* There is always only one block per MCU */

		if (EOBRUN > 0)		/* if it's a band of zeroes... */
			EOBRUN--;			/* ...process it now (we do nothing) */
		else {
			BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
			block = MCU_data[0];
			tbl = entropy->ac_derived_tbl;

			for (k = cinfo->Ss; k <= Se; k++) {
				HUFF_DECODE(s, br_state, tbl, return FALSE, label2);
				r = s >> 4;
				s &= 15;
				if (s) {
					k += r;
					CHECK_BIT_BUFFER(br_state, s, return FALSE);
					r = GET_BITS(s);
					s = HUFF_EXTEND(r, s);
					/* Scale and output coefficient in natural (dezigzagged) order */
					(*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al);
				} else {
					if (r == 15) {	/* ZRL */
						k += 15;		/* skip 15 zeroes in band */
					} else {		/* EOBr, run length is 2^r + appended bits */
						EOBRUN = 1 << r;
						if (r) {		/* EOBr, r > 0 */
							CHECK_BIT_BUFFER(br_state, r, return FALSE);
							r = GET_BITS(r);
							EOBRUN += r;
						}
						EOBRUN--;		/* this band is processed at this moment */
						break;		/* force end-of-band */
					}
				}
			}

			BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
		}

		/* Completed MCU, so update state */
		entropy->saved.EOBRUN = EOBRUN;	/* only part of saved state we need */
	}

	/* Account for restart interval (no-op if not using restarts) */
	entropy->restarts_to_go--;

	return TRUE;
}


/*
* MCU decoding for DC successive approximation refinement scan.
* Note: we assume such scans can be multi-component, although the spec
* is not very clear on the point.
*/

METHODDEF(boolean)
decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
{   
	phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
	int p1 = 1 << cinfo->Al;	/* 1 in the bit position being coded */
	int blkn;
	JBLOCKROW block;
	BITREAD_STATE_VARS;

	/* Process restart marker if needed; may have to suspend */
	if (cinfo->restart_interval) {
		if (entropy->restarts_to_go == 0)
			if (! process_restart(cinfo))
				return FALSE;
	}

	/* Not worth the cycles to check insufficient_data here,
	* since we will not change the data anyway if we read zeroes.
	*/

	/* Load up working state */
	BITREAD_LOAD_STATE(cinfo,entropy->bitstate);

	/* Outer loop handles each block in the MCU */

	for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
		block = MCU_data[blkn];

		/* Encoded data is simply the next bit of the two's-complement DC value */
		CHECK_BIT_BUFFER(br_state, 1, return FALSE);
		if (GET_BITS(1))
			(*block)[0] |= p1;
		/* Note: since we use |=, repeating the assignment later is safe */
	}

	/* Completed MCU, so update state */
	BITREAD_SAVE_STATE(cinfo,entropy->bitstate);

	/* Account for restart interval (no-op if not using restarts) */
	entropy->restarts_to_go--;

	return TRUE;
}


/*
* MCU decoding for AC successive approximation refinement scan.
*/

METHODDEF(boolean)
decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
{   
	phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
	int Se = cinfo->Se;
	int p1 = 1 << cinfo->Al;	/* 1 in the bit position being coded */
	int m1 = (-1) << cinfo->Al;	/* -1 in the bit position being coded */
	register int s, k, r;
	unsigned int EOBRUN;
	JBLOCKROW block;
	JCOEFPTR thiscoef;
	BITREAD_STATE_VARS;
	d_derived_tbl * tbl;
	int num_newnz;
	int newnz_pos[DCTSIZE2];

	/* Process restart marker if needed; may have to suspend */
	if (cinfo->restart_interval) {
		if (entropy->restarts_to_go == 0)
			if (! process_restart(cinfo))
				return FALSE;
	}

	/* If we've run out of data, don't modify the MCU.
	*/
	if (! entropy->pub.insufficient_data) {

		/* Load up working state */
		BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
		EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */

		/* There is always only one block per MCU */
		block = MCU_data[0];
		tbl = entropy->ac_derived_tbl;

		/* If we are forced to suspend, we must undo the assignments to any newly
		* nonzero coefficients in the block, because otherwise we'd get confused
		* next time about which coefficients were already nonzero.
		* But we need not undo addition of bits to already-nonzero coefficients;
		* instead, we can test the current bit to see if we already did it.
		*/
		num_newnz = 0;

		/* initialize coefficient loop counter to start of band */
		k = cinfo->Ss;

		if (EOBRUN == 0) {
			for (; k <= Se; k++) {
				HUFF_DECODE(s, br_state, tbl, goto undoit, label3);
				r = s >> 4;
				s &= 15;
				if (s) {
					if (s != 1)		/* size of new coef should always be 1 */
						WARNMS(cinfo, JWRN_HUFF_BAD_CODE);
					CHECK_BIT_BUFFER(br_state, 1, goto undoit);
					if (GET_BITS(1))
						s = p1;		/* newly nonzero coef is positive */
					else
						s = m1;		/* newly nonzero coef is negative */
				} else {
					if (r != 15) {
						EOBRUN = 1 << r;	/* EOBr, run length is 2^r + appended bits */
						if (r) {
							CHECK_BIT_BUFFER(br_state, r, goto undoit);
							r = GET_BITS(r);
							EOBRUN += r;
						}
						break;		/* rest of block is handled by EOB logic */
					}
					/* note s = 0 for processing ZRL */
				}
				/* Advance over already-nonzero coefs and r still-zero coefs,
				* appending correction bits to the nonzeroes.  A correction bit is 1
				* if the absolute value of the coefficient must be increased.
				*/
				do {
					thiscoef = *block + jpeg_natural_order[k];
					if (*thiscoef != 0) {
						CHECK_BIT_BUFFER(br_state, 1, goto undoit);
						if (GET_BITS(1)) {
							if ((*thiscoef & p1) == 0) { /* do nothing if already set it */
								if (*thiscoef >= 0)
									*thiscoef += p1;
								else
									*thiscoef += m1;
							}
						}
					} else {
						if (--r < 0)
							break;		/* reached target zero coefficient */
					}
					k++;
				} while (k <= Se);
				if (s) {
					int pos = jpeg_natural_order[k];
					/* Output newly nonzero coefficient */
					(*block)[pos] = (JCOEF) s;
					/* Remember its position in case we have to suspend */
					newnz_pos[num_newnz++] = pos;
				}
			}
		}

		if (EOBRUN > 0) {
			/* Scan any remaining coefficient positions after the end-of-band
			* (the last newly nonzero coefficient, if any).  Append a correction
			* bit to each already-nonzero coefficient.  A correction bit is 1
			* if the absolute value of the coefficient must be increased.
			*/
			for (; k <= Se; k++) {
				thiscoef = *block + jpeg_natural_order[k];
				if (*thiscoef != 0) {
					CHECK_BIT_BUFFER(br_state, 1, goto undoit);
					if (GET_BITS(1)) {
						if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */
							if (*thiscoef >= 0)
								*thiscoef += p1;
							else
								*thiscoef += m1;
						}
					}
				}
			}
			/* Count one block completed in EOB run */
			EOBRUN--;
		}

		/* Completed MCU, so update state */
		BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
		entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */
	}

	/* Account for restart interval (no-op if not using restarts) */
	entropy->restarts_to_go--;

	return TRUE;

undoit:
	/* Re-zero any output coefficients that we made newly nonzero */
	while (num_newnz > 0)
		(*block)[newnz_pos[--num_newnz]] = 0;

	return FALSE;
}


/*
* Module initialization routine for progressive Huffman entropy decoding.
*/

GLOBAL(void)
jinit_phuff_decoder (j_decompress_ptr cinfo)
{
	phuff_entropy_ptr entropy;
	int *coef_bit_ptr;
	int ci, i;

	entropy = (phuff_entropy_ptr)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		SIZEOF(phuff_entropy_decoder));
	cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
	entropy->pub.start_pass = start_pass_phuff_decoder;

	/* Mark derived tables unallocated */
	for (i = 0; i < NUM_HUFF_TBLS; i++) {
		entropy->derived_tbls[i] = NULL;
	}

	/* Create progression status table */
	cinfo->coef_bits = (int (*)[DCTSIZE2])
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		cinfo->num_components*DCTSIZE2*SIZEOF(int));
	coef_bit_ptr = & cinfo->coef_bits[0][0];
	for (ci = 0; ci < cinfo->num_components; ci++) 
		for (i = 0; i < DCTSIZE2; i++)
			*coef_bit_ptr++ = -1;
}

#endif /* D_PROGRESSIVE_SUPPORTED */