gzdoom-gles/jpeg-6b/jdmaster.c

/*
* jdmaster.c
*
* Copyright (C) 1991-1997, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains master control logic for the JPEG decompressor.
* These routines are concerned with selecting the modules to be executed
* and with determining the number of passes and the work to be done in each
* pass.
*/

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"


/* Private state */

typedef struct {
	struct jpeg_decomp_master pub; /* public fields */

	int pass_number;		/* # of passes completed */

	boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */

	/* Saved references to initialized quantizer modules,
	* in case we need to switch modes.
	*/
	struct jpeg_color_quantizer * quantizer_1pass;
	struct jpeg_color_quantizer * quantizer_2pass;
} my_decomp_master;

typedef my_decomp_master * my_master_ptr;


/*
* Determine whether merged upsample/color conversion should be used.
* CRUCIAL: this must match the actual capabilities of jdmerge.c!
*/

LOCAL(boolean)
use_merged_upsample (j_decompress_ptr cinfo)
{
#ifdef UPSAMPLE_MERGING_SUPPORTED
	/* Merging is the equivalent of plain box-filter upsampling */
	if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling)
		return FALSE;
	/* jdmerge.c only supports YCC=>RGB color conversion */
	if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 ||
		cinfo->out_color_space != JCS_RGB ||
		cinfo->out_color_components != RGB_PIXELSIZE)
		return FALSE;
	/* and it only handles 2h1v or 2h2v sampling ratios */
	if (cinfo->comp_info[0].h_samp_factor != 2 ||
		cinfo->comp_info[1].h_samp_factor != 1 ||
		cinfo->comp_info[2].h_samp_factor != 1 ||
		cinfo->comp_info[0].v_samp_factor >  2 ||
		cinfo->comp_info[1].v_samp_factor != 1 ||
		cinfo->comp_info[2].v_samp_factor != 1)
		return FALSE;
	/* furthermore, it doesn't work if we've scaled the IDCTs differently */
	if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
		cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
		cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size)
		return FALSE;
	/* ??? also need to test for upsample-time rescaling, when & if supported */
	return TRUE;			/* by golly, it'll work... */
#else
	return FALSE;
#endif
}


/*
* Compute output image dimensions and related values.
* NOTE: this is exported for possible use by application.
* Hence it mustn't do anything that can't be done twice.
* Also note that it may be called before the master module is initialized!
*/

GLOBAL(void)
jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
/* Do computations that are needed before master selection phase */
{
	/* Prevent application from calling me at wrong times */
	if (cinfo->global_state != DSTATE_READY)
		ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);

	/* Hardwire it to "no scaling" */
	cinfo->output_width = cinfo->image_width;
	cinfo->output_height = cinfo->image_height;
	/* jdinput.c has already initialized DCT_scaled_size to DCTSIZE,
	* and has computed unscaled downsampled_width and downsampled_height.
	*/

	/* Report number of components in selected colorspace. */
	/* Probably this should be in the color conversion module... */
	switch (cinfo->out_color_space) {
  case JCS_GRAYSCALE:
	  cinfo->out_color_components = 1;
	  break;
  case JCS_RGB:
#if RGB_PIXELSIZE != 3
	  cinfo->out_color_components = RGB_PIXELSIZE;
	  break;
#endif /* else share code with YCbCr */
  case JCS_YCbCr:
	  cinfo->out_color_components = 3;
	  break;
  case JCS_CMYK:
  case JCS_YCCK:
	  cinfo->out_color_components = 4;
	  break;
  default:			/* else must be same colorspace as in file */
	  cinfo->out_color_components = cinfo->num_components;
	  break;
	}
	cinfo->output_components = cinfo->out_color_components;

	/* See if upsampler will want to emit more than one row at a time */
	if (use_merged_upsample(cinfo))
		cinfo->rec_outbuf_height = cinfo->max_v_samp_factor;
	else
		cinfo->rec_outbuf_height = 1;
}


/*
* Several decompression processes need to range-limit values to the range
* 0..MAXJSAMPLE; the input value may fall somewhat outside this range
* due to noise introduced by quantization, roundoff error, etc.  These
* processes are inner loops and need to be as fast as possible.  On most
* machines, particularly CPUs with pipelines or instruction prefetch,
* a (subscript-check-less) C table lookup
*		x = sample_range_limit[x];
* is faster than explicit tests
*		if (x < 0)  x = 0;
*		else if (x > MAXJSAMPLE)  x = MAXJSAMPLE;
* These processes all use a common table prepared by the routine below.
*
* For most steps we can mathematically guarantee that the initial value
* of x is within MAXJSAMPLE+1 of the legal range, so a table running from
* -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient.  But for the initial
* limiting step (just after the IDCT), a wildly out-of-range value is 
* possible if the input data is corrupt.  To avoid any chance of indexing
* off the end of memory and getting a bad-pointer trap, we perform the
* post-IDCT limiting thus:
*		x = range_limit[x & MASK];
* where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit
* samples.  Under normal circumstances this is more than enough range and
* a correct output will be generated; with bogus input data the mask will
* cause wraparound, and we will safely generate a bogus-but-in-range output.
* For the post-IDCT step, we want to convert the data from signed to unsigned
* representation by adding CENTERJSAMPLE at the same time that we limit it.
* So the post-IDCT limiting table ends up looking like this:
*   CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE,
*   MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
*   0          (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
*   0,1,...,CENTERJSAMPLE-1
* Negative inputs select values from the upper half of the table after
* masking.
*
* We can save some space by overlapping the start of the post-IDCT table
* with the simpler range limiting table.  The post-IDCT table begins at
* sample_range_limit + CENTERJSAMPLE.
*
* Note that the table is allocated in near data space on PCs; it's small
* enough and used often enough to justify this.
*/

LOCAL(void)
prepare_range_limit_table (j_decompress_ptr cinfo)
/* Allocate and fill in the sample_range_limit table */
{
	JSAMPLE * table;
	int i;

	table = (JSAMPLE *)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		(5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE));
	table += (MAXJSAMPLE+1);	/* allow negative subscripts of simple table */
	cinfo->sample_range_limit = table;
	/* First segment of "simple" table: limit[x] = 0 for x < 0 */
	MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE));
	/* Main part of "simple" table: limit[x] = x */
	for (i = 0; i <= MAXJSAMPLE; i++)
		table[i] = (JSAMPLE) i;
	table += CENTERJSAMPLE;	/* Point to where post-IDCT table starts */
	/* End of simple table, rest of first half of post-IDCT table */
	for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++)
		table[i] = MAXJSAMPLE;
	/* Second half of post-IDCT table */
	MEMZERO(table + (2 * (MAXJSAMPLE+1)),
		(2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE));
	MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE),
		cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE));
}


/*
* Master selection of decompression modules.
* This is done once at jpeg_start_decompress time.  We determine
* which modules will be used and give them appropriate initialization calls.
* We also initialize the decompressor input side to begin consuming data.
*
* Since jpeg_read_header has finished, we know what is in the SOF
* and (first) SOS markers.  We also have all the application parameter
* settings.
*/

LOCAL(void)
master_selection (j_decompress_ptr cinfo)
{
	my_master_ptr master = (my_master_ptr) cinfo->master;
	boolean use_c_buffer;
	long samplesperrow;
	JDIMENSION jd_samplesperrow;

	/* Initialize dimensions and other stuff */
	jpeg_calc_output_dimensions(cinfo);
	prepare_range_limit_table(cinfo);

	/* Width of an output scanline must be representable as JDIMENSION. */
	samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components;
	jd_samplesperrow = (JDIMENSION) samplesperrow;
	if ((long) jd_samplesperrow != samplesperrow)
		ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);

	/* Initialize my private state */
	master->pass_number = 0;
	master->using_merged_upsample = use_merged_upsample(cinfo);

	/* Color quantizer selection */
	master->quantizer_1pass = NULL;
	master->quantizer_2pass = NULL;

	/* Post-processing: in particular, color conversion first */
	if (master->using_merged_upsample) {
#ifdef UPSAMPLE_MERGING_SUPPORTED
		jinit_merged_upsampler(cinfo); /* does color conversion too */
#else
		ERREXIT(cinfo, JERR_NOT_COMPILED);
#endif
	} else {
		jinit_color_deconverter(cinfo);
		jinit_upsampler(cinfo);
	}
	jinit_d_post_controller(cinfo, 0);
	/* Inverse DCT */
	jinit_inverse_dct(cinfo);
	/* Entropy decoding: either Huffman or arithmetic coding. */
	if (cinfo->arith_code) {
		ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
	} else {
		if (cinfo->progressive_mode) {
#ifdef D_PROGRESSIVE_SUPPORTED
			jinit_phuff_decoder(cinfo);
#else
			ERREXIT(cinfo, JERR_NOT_COMPILED);
#endif
		} else
			jinit_huff_decoder(cinfo);
	}

	/* Initialize principal buffer controllers. */
	use_c_buffer = cinfo->inputctl->has_multiple_scans;
	jinit_d_coef_controller(cinfo, use_c_buffer);

	jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */);

	/* We can now tell the memory manager to allocate virtual arrays. */
	(*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);

	/* Initialize input side of decompressor to consume first scan. */
	(*cinfo->inputctl->start_input_pass) (cinfo);

#ifdef D_MULTISCAN_FILES_SUPPORTED
	/* If jpeg_start_decompress will read the whole file, initialize
	* progress monitoring appropriately.  The input step is counted
	* as one pass.
	*/
	if (cinfo->progress != NULL && cinfo->inputctl->has_multiple_scans) {
		int nscans;
		/* Estimate number of scans to set pass_limit. */
		if (cinfo->progressive_mode) {
			/* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */
			nscans = 2 + 3 * cinfo->num_components;
		} else {
			/* For a nonprogressive multiscan file, estimate 1 scan per component. */
			nscans = cinfo->num_components;
		}
		cinfo->progress->pass_counter = 0L;
		cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans;
		cinfo->progress->completed_passes = 0;
		cinfo->progress->total_passes = 2;
		/* Count the input pass as done */
		master->pass_number++;
	}
#endif /* D_MULTISCAN_FILES_SUPPORTED */
}


/*
* Per-pass setup.
* This is called at the beginning of each output pass.  We determine which
* modules will be active during this pass and give them appropriate
* start_pass calls.  We also set is_dummy_pass to indicate whether this
* is a "real" output pass or a dummy pass for color quantization.
* (In the latter case, jdapistd.c will crank the pass to completion.)
*/

METHODDEF(void)
prepare_for_output_pass (j_decompress_ptr cinfo)
{
	my_master_ptr master = (my_master_ptr) cinfo->master;

	(*cinfo->idct->start_pass) (cinfo);
	(*cinfo->coef->start_output_pass) (cinfo);
	if (! master->using_merged_upsample)
		(*cinfo->cconvert->start_pass) (cinfo);
	(*cinfo->upsample->start_pass) (cinfo);
	(*cinfo->post->start_pass) (cinfo, JBUF_PASS_THRU);
	(*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU);

	/* Set up progress monitor's pass info if present */
	if (cinfo->progress != NULL) {
		cinfo->progress->completed_passes = master->pass_number;
		cinfo->progress->total_passes = master->pass_number + 1;
	}
}


/*
* Finish up at end of an output pass.
*/

METHODDEF(void)
finish_output_pass (j_decompress_ptr cinfo)
{
	my_master_ptr master = (my_master_ptr) cinfo->master;

	master->pass_number++;
}


/*
* Initialize master decompression control and select active modules.
* This is performed at the start of jpeg_start_decompress.
*/

GLOBAL(void)
jinit_master_decompress (j_decompress_ptr cinfo)
{
	my_master_ptr master;

	master = (my_master_ptr)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
		SIZEOF(my_decomp_master));
	cinfo->master = (struct jpeg_decomp_master *) master;
	master->pub.prepare_for_output_pass = prepare_for_output_pass;
	master->pub.finish_output_pass = finish_output_pass;

	master_selection(cinfo);
}