gzdoom-gles/src/textures/buildtexture.cpp

398 lines
10 KiB
C++
Raw Normal View History

/*
** buildtexture.cpp
** Handling Build textures
**
**---------------------------------------------------------------------------
** Copyright 2004-2006 Randy Heit
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
**
**
*/
#include "doomtype.h"
#include "files.h"
#include "r_local.h"
#include "w_wad.h"
#include "templates.h"
#include "cmdlib.h"
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
#include "st_start.h"
static TArray<BYTE *> BuildTileFiles;
//==========================================================================
//
// A texture defined in a Build TILESxxx.ART file
//
//==========================================================================
class FBuildTexture : public FTexture
{
public:
FBuildTexture (int tilenum, const BYTE *pixels, int width, int height, int left, int top);
~FBuildTexture ();
const BYTE *GetColumn (unsigned int column, const Span **spans_out);
const BYTE *GetPixels ();
void Unload ();
protected:
const BYTE *Pixels;
Span **Spans;
};
//==========================================================================
//
//
//
//==========================================================================
FBuildTexture::FBuildTexture (int tilenum, const BYTE *pixels, int width, int height, int left, int top)
: Pixels (pixels), Spans (NULL)
{
Width = width;
Height = height;
LeftOffset = left;
TopOffset = top;
CalcBitSize ();
sprintf (Name, "BTIL%04d", tilenum);
UseType = TEX_Build;
}
//==========================================================================
//
//
//
//==========================================================================
FBuildTexture::~FBuildTexture ()
{
if (Spans != NULL)
{
FreeSpans (Spans);
Spans = NULL;
}
}
//==========================================================================
//
//
//
//==========================================================================
void FBuildTexture::Unload ()
{
// Nothing to do, since the pixels are accessed from memory-mapped files directly
}
//==========================================================================
//
//
//
//==========================================================================
const BYTE *FBuildTexture::GetPixels ()
{
return Pixels;
}
//==========================================================================
//
//
//
//==========================================================================
const BYTE *FBuildTexture::GetColumn (unsigned int column, const Span **spans_out)
{
if (column >= Width)
{
if (WidthMask + 1 == Width)
{
column &= WidthMask;
}
else
{
column %= Width;
}
}
if (spans_out != NULL)
{
if (Spans == NULL)
{
Spans = CreateSpans (Pixels);
}
*spans_out = Spans[column];
}
return Pixels + column*Height;
}
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
//===========================================================================
//
// AddTiles
//
// Adds all the tiles in an artfile to the texture manager.
//
//===========================================================================
static void AddTiles (void *tiles)
{
// int numtiles = LittleLong(((DWORD *)tiles)[1]); // This value is not reliable
int tilestart = LittleLong(((DWORD *)tiles)[2]);
int tileend = LittleLong(((DWORD *)tiles)[3]);
const WORD *tilesizx = &((const WORD *)tiles)[8];
const WORD *tilesizy = &tilesizx[tileend - tilestart + 1];
const DWORD *picanm = (const DWORD *)&tilesizy[tileend - tilestart + 1];
BYTE *tiledata = (BYTE *)&picanm[tileend - tilestart + 1];
for (int i = tilestart; i <= tileend; ++i)
{
int pic = i - tilestart;
int width = LittleShort(tilesizx[pic]);
int height = LittleShort(tilesizy[pic]);
DWORD anm = LittleLong(picanm[pic]);
int xoffs = (SBYTE)((anm >> 8) & 255) + width/2;
int yoffs = (SBYTE)((anm >> 16) & 255) + height/2;
int size = width*height;
int texnum;
FTexture *tex;
if (width <= 0 || height <= 0) continue;
tex = new FBuildTexture (i, tiledata, width, height, xoffs, yoffs);
texnum = TexMan.AddTexture (tex);
while (size > 0)
{
*tiledata = 255 - *tiledata;
tiledata++;
size--;
}
StartScreen->Progress();
if ((picanm[pic] & 63) && (picanm[pic] & 192))
{
int type, speed;
switch (picanm[pic] & 192)
{
case 64: type = 2; break;
case 128: type = 0; break;
case 192: type = 1; break;
default: type = 0; break; // Won't happen, but GCC bugs me if I don't put this here.
}
speed = (anm >> 24) & 15;
speed = MAX (1, (1 << speed) * 1000 / 120); // Convert from 120 Hz to 1000 Hz.
R_AddSimpleAnim (texnum, picanm[pic] & 63, type, speed);
}
// Blood's rotation types:
// 0 - Single
// 1 - 5 Full
// 2 - 8 Full
// 3 - Bounce (looks no different from Single; seems to signal bouncy sprites)
// 4 - 5 Half (not used in game)
// 5 - 3 Flat (not used in game)
// 6 - Voxel
// 7 - Spin Voxel
int rotType = (anm >> 28) & 7;
if (rotType == 1)
{
spriteframe_t rot;
rot.Texture[0] = texnum;
rot.Texture[1] = texnum;
for (int j = 1; j < 4; ++j)
{
rot.Texture[j*2] = texnum + j;
rot.Texture[j*2+1] = texnum + j;
rot.Texture[16-j*2] = texnum + j;
rot.Texture[17-j*2] = texnum + j;
}
rot.Texture[8] = texnum + 4;
rot.Texture[9] = texnum + 4;
rot.Flip = 0x00FC;
tex->Rotations = SpriteFrames.Push (rot);
}
else if (rotType == 2)
{
spriteframe_t rot;
rot.Texture[0] = texnum;
rot.Texture[1] = texnum;
for (int j = 1; j < 8; ++j)
{
rot.Texture[16-j*2] = texnum + j;
rot.Texture[17-j*2] = texnum + j;
}
rot.Flip = 0;
tex->Rotations = SpriteFrames.Push (rot);
}
}
}
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
//===========================================================================
//
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
// CountTiles
//
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
// Returns the number of tiles provided by an artfile
//
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
//===========================================================================
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
static int CountTiles (void *tiles)
{
int version = LittleLong(*(DWORD *)tiles);
if (version != 1)
{
return 0;
}
int tilestart = LittleLong(((DWORD *)tiles)[2]);
int tileend = LittleLong(((DWORD *)tiles)[3]);
return tileend >= tilestart ? tileend - tilestart + 1 : 0;
}
//===========================================================================
//
// R_CountBuildTiles
//
// Returns the number of tiles found. Also loads all the data for
// R_InitBuildTiles() to process later.
//
//===========================================================================
int R_CountBuildTiles ()
{
int numartfiles = 0;
char artfile[] = "tilesXXX.art";
int lumpnum;
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
int numtiles;
int totaltiles = 0;
lumpnum = Wads.CheckNumForFullName ("blood.pal");
if (lumpnum >= 0)
{
// Blood's tiles are external resources. (Why did they do it like that?)
FString rffpath = Wads.GetWadFullName (Wads.GetLumpFile (lumpnum));
int slashat = rffpath.LastIndexOf ('/');
if (slashat >= 0)
{
rffpath.Truncate (slashat + 1);
}
else
{
rffpath += '/';
}
for (; numartfiles < 1000; numartfiles++)
{
artfile[5] = numartfiles / 100 + '0';
artfile[6] = numartfiles / 10 % 10 + '0';
artfile[7] = numartfiles % 10 + '0';
FString artpath = rffpath;
artpath += artfile;
FILE *f = fopen (artpath, "rb");
if (f == NULL)
{
break;
}
size_t len = Q_filelength (f);
BYTE *art = new BYTE[len];
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
if (fread (art, 1, len, f) != len || (numtiles = CountTiles(art)) == 0)
{
delete[] art;
}
else
{
BuildTileFiles.Push (art);
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
totaltiles += numtiles;
}
fclose (f);
}
}
for (; numartfiles < 1000; numartfiles++)
{
artfile[5] = numartfiles / 100 + '0';
artfile[6] = numartfiles / 10 % 10 + '0';
artfile[7] = numartfiles % 10 + '0';
lumpnum = Wads.CheckNumForFullName (artfile);
if (lumpnum < 0)
{
break;
}
BYTE *art = new BYTE[Wads.LumpLength (lumpnum)];
Wads.ReadLump (lumpnum, art);
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
if ((numtiles = CountTiles(art)) == 0)
{
delete[] art;
}
else
{
BuildTileFiles.Push (art);
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
totaltiles += numtiles;
}
}
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
return totaltiles;
}
//===========================================================================
//
// R_InitBuildTiles
//
// [RH] Support Build tiles!
//
//===========================================================================
void R_InitBuildTiles ()
{
for (unsigned int i = 0; i < BuildTileFiles.Size(); ++i)
{
AddTiles (BuildTileFiles[i]);
}
}
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
//===========================================================================
//
// R_DeinitBuildTiles
//
//===========================================================================
void R_DeinitBuildTiles ()
{
for (unsigned int i = 0; i < BuildTileFiles.Size(); ++i)
{
delete[] BuildTileFiles[i];
}
BuildTileFiles.Clear();
}