gzdoom-gles/libraries/adlmidi/chips/nuked/nukedopl3.c

1436 lines
40 KiB
C
Raw Normal View History

Upgrade libADLMIDI and libOPNMIDI Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage") Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI) ADLMIDI 1.3.3 2018-06-19 * Fixed an inability to load another custom bank without of library re-initialization * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks * Fixed an incorrect processing of auto-flags * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) ADLMIDI 1.3.2 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.3.0 2018-06-19 * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Fixed an incorrect processing of auto-flags * MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.2.0 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for MAME YM2612 Emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) (cherry picked from commit ceec12056a7868c71ce8a3a8922af2abd8fad556)
2018-06-19 21:48:42 +00:00
/*
* Copyright (C) 2013-2018 Alexey Khokholov (Nuke.YKT)
*
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time. # Conflicts: # src/sound/mididevices/music_adlmidi_mididevice.cpp # src/sound/mididevices/music_opnmidi_mididevice.cpp # wadsrc/static/menudef.txt
2018-10-01 21:07:05 +00:00
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
Upgrade libADLMIDI and libOPNMIDI Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage") Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI) ADLMIDI 1.3.3 2018-06-19 * Fixed an inability to load another custom bank without of library re-initialization * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks * Fixed an incorrect processing of auto-flags * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) ADLMIDI 1.3.2 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.3.0 2018-06-19 * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Fixed an incorrect processing of auto-flags * MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.2.0 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for MAME YM2612 Emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) (cherry picked from commit ceec12056a7868c71ce8a3a8922af2abd8fad556)
2018-06-19 21:48:42 +00:00
*
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time. # Conflicts: # src/sound/mididevices/music_adlmidi_mididevice.cpp # src/sound/mididevices/music_opnmidi_mididevice.cpp # wadsrc/static/menudef.txt
2018-10-01 21:07:05 +00:00
* This library is distributed in the hope that it will be useful,
Upgrade libADLMIDI and libOPNMIDI Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage") Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI) ADLMIDI 1.3.3 2018-06-19 * Fixed an inability to load another custom bank without of library re-initialization * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks * Fixed an incorrect processing of auto-flags * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) ADLMIDI 1.3.2 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.3.0 2018-06-19 * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Fixed an incorrect processing of auto-flags * MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.2.0 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for MAME YM2612 Emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) (cherry picked from commit ceec12056a7868c71ce8a3a8922af2abd8fad556)
2018-06-19 21:48:42 +00:00
* but WITHOUT ANY WARRANTY; without even the implied warranty of
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time. # Conflicts: # src/sound/mididevices/music_adlmidi_mididevice.cpp # src/sound/mididevices/music_opnmidi_mididevice.cpp # wadsrc/static/menudef.txt
2018-10-01 21:07:05 +00:00
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
Upgrade libADLMIDI and libOPNMIDI Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage") Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI) ADLMIDI 1.3.3 2018-06-19 * Fixed an inability to load another custom bank without of library re-initialization * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks * Fixed an incorrect processing of auto-flags * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) ADLMIDI 1.3.2 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.3.0 2018-06-19 * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Fixed an incorrect processing of auto-flags * MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.2.0 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for MAME YM2612 Emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) (cherry picked from commit ceec12056a7868c71ce8a3a8922af2abd8fad556)
2018-06-19 21:48:42 +00:00
*
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time. # Conflicts: # src/sound/mididevices/music_adlmidi_mididevice.cpp # src/sound/mididevices/music_opnmidi_mididevice.cpp # wadsrc/static/menudef.txt
2018-10-01 21:07:05 +00:00
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Upgrade libADLMIDI and libOPNMIDI Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage") Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI) ADLMIDI 1.3.3 2018-06-19 * Fixed an inability to load another custom bank without of library re-initialization * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks * Fixed an incorrect processing of auto-flags * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) ADLMIDI 1.3.2 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.3.0 2018-06-19 * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Fixed an incorrect processing of auto-flags * MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.2.0 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for MAME YM2612 Emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) (cherry picked from commit ceec12056a7868c71ce8a3a8922af2abd8fad556)
2018-06-19 21:48:42 +00:00
*
* Nuked OPL3 emulator.
* Thanks:
* MAME Development Team(Jarek Burczynski, Tatsuyuki Satoh):
* Feedback and Rhythm part calculation information.
* forums.submarine.org.uk(carbon14, opl3):
* Tremolo and phase generator calculation information.
* OPLx decapsulated(Matthew Gambrell, Olli Niemitalo):
* OPL2 ROMs.
* siliconpr0n.org(John McMaster, digshadow):
* YMF262 and VRC VII decaps and die shots.
*
* version: 1.8
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "nukedopl3.h"
#define RSM_FRAC 10
/* Channel types */
enum {
ch_2op = 0,
ch_4op = 1,
ch_4op2 = 2,
ch_drum = 3
};
/* Envelope key types */
enum {
egk_norm = 0x01,
egk_drum = 0x02
};
/*
* logsin table
*/
static const Bit16u logsinrom[256] = {
0x859, 0x6c3, 0x607, 0x58b, 0x52e, 0x4e4, 0x4a6, 0x471,
0x443, 0x41a, 0x3f5, 0x3d3, 0x3b5, 0x398, 0x37e, 0x365,
0x34e, 0x339, 0x324, 0x311, 0x2ff, 0x2ed, 0x2dc, 0x2cd,
0x2bd, 0x2af, 0x2a0, 0x293, 0x286, 0x279, 0x26d, 0x261,
0x256, 0x24b, 0x240, 0x236, 0x22c, 0x222, 0x218, 0x20f,
0x206, 0x1fd, 0x1f5, 0x1ec, 0x1e4, 0x1dc, 0x1d4, 0x1cd,
0x1c5, 0x1be, 0x1b7, 0x1b0, 0x1a9, 0x1a2, 0x19b, 0x195,
0x18f, 0x188, 0x182, 0x17c, 0x177, 0x171, 0x16b, 0x166,
0x160, 0x15b, 0x155, 0x150, 0x14b, 0x146, 0x141, 0x13c,
0x137, 0x133, 0x12e, 0x129, 0x125, 0x121, 0x11c, 0x118,
0x114, 0x10f, 0x10b, 0x107, 0x103, 0x0ff, 0x0fb, 0x0f8,
0x0f4, 0x0f0, 0x0ec, 0x0e9, 0x0e5, 0x0e2, 0x0de, 0x0db,
0x0d7, 0x0d4, 0x0d1, 0x0cd, 0x0ca, 0x0c7, 0x0c4, 0x0c1,
0x0be, 0x0bb, 0x0b8, 0x0b5, 0x0b2, 0x0af, 0x0ac, 0x0a9,
0x0a7, 0x0a4, 0x0a1, 0x09f, 0x09c, 0x099, 0x097, 0x094,
0x092, 0x08f, 0x08d, 0x08a, 0x088, 0x086, 0x083, 0x081,
0x07f, 0x07d, 0x07a, 0x078, 0x076, 0x074, 0x072, 0x070,
0x06e, 0x06c, 0x06a, 0x068, 0x066, 0x064, 0x062, 0x060,
0x05e, 0x05c, 0x05b, 0x059, 0x057, 0x055, 0x053, 0x052,
0x050, 0x04e, 0x04d, 0x04b, 0x04a, 0x048, 0x046, 0x045,
0x043, 0x042, 0x040, 0x03f, 0x03e, 0x03c, 0x03b, 0x039,
0x038, 0x037, 0x035, 0x034, 0x033, 0x031, 0x030, 0x02f,
0x02e, 0x02d, 0x02b, 0x02a, 0x029, 0x028, 0x027, 0x026,
0x025, 0x024, 0x023, 0x022, 0x021, 0x020, 0x01f, 0x01e,
0x01d, 0x01c, 0x01b, 0x01a, 0x019, 0x018, 0x017, 0x017,
0x016, 0x015, 0x014, 0x014, 0x013, 0x012, 0x011, 0x011,
0x010, 0x00f, 0x00f, 0x00e, 0x00d, 0x00d, 0x00c, 0x00c,
0x00b, 0x00a, 0x00a, 0x009, 0x009, 0x008, 0x008, 0x007,
0x007, 0x007, 0x006, 0x006, 0x005, 0x005, 0x005, 0x004,
0x004, 0x004, 0x003, 0x003, 0x003, 0x002, 0x002, 0x002,
0x002, 0x001, 0x001, 0x001, 0x001, 0x001, 0x001, 0x001,
0x000, 0x000, 0x000, 0x000, 0x000, 0x000, 0x000, 0x000
};
/*
* exp table
*/
static const Bit16u exprom[256] = {
0x7fa, 0x7f5, 0x7ef, 0x7ea, 0x7e4, 0x7df, 0x7da, 0x7d4,
0x7cf, 0x7c9, 0x7c4, 0x7bf, 0x7b9, 0x7b4, 0x7ae, 0x7a9,
0x7a4, 0x79f, 0x799, 0x794, 0x78f, 0x78a, 0x784, 0x77f,
0x77a, 0x775, 0x770, 0x76a, 0x765, 0x760, 0x75b, 0x756,
0x751, 0x74c, 0x747, 0x742, 0x73d, 0x738, 0x733, 0x72e,
0x729, 0x724, 0x71f, 0x71a, 0x715, 0x710, 0x70b, 0x706,
0x702, 0x6fd, 0x6f8, 0x6f3, 0x6ee, 0x6e9, 0x6e5, 0x6e0,
0x6db, 0x6d6, 0x6d2, 0x6cd, 0x6c8, 0x6c4, 0x6bf, 0x6ba,
0x6b5, 0x6b1, 0x6ac, 0x6a8, 0x6a3, 0x69e, 0x69a, 0x695,
0x691, 0x68c, 0x688, 0x683, 0x67f, 0x67a, 0x676, 0x671,
0x66d, 0x668, 0x664, 0x65f, 0x65b, 0x657, 0x652, 0x64e,
0x649, 0x645, 0x641, 0x63c, 0x638, 0x634, 0x630, 0x62b,
0x627, 0x623, 0x61e, 0x61a, 0x616, 0x612, 0x60e, 0x609,
0x605, 0x601, 0x5fd, 0x5f9, 0x5f5, 0x5f0, 0x5ec, 0x5e8,
0x5e4, 0x5e0, 0x5dc, 0x5d8, 0x5d4, 0x5d0, 0x5cc, 0x5c8,
0x5c4, 0x5c0, 0x5bc, 0x5b8, 0x5b4, 0x5b0, 0x5ac, 0x5a8,
0x5a4, 0x5a0, 0x59c, 0x599, 0x595, 0x591, 0x58d, 0x589,
0x585, 0x581, 0x57e, 0x57a, 0x576, 0x572, 0x56f, 0x56b,
0x567, 0x563, 0x560, 0x55c, 0x558, 0x554, 0x551, 0x54d,
0x549, 0x546, 0x542, 0x53e, 0x53b, 0x537, 0x534, 0x530,
0x52c, 0x529, 0x525, 0x522, 0x51e, 0x51b, 0x517, 0x514,
0x510, 0x50c, 0x509, 0x506, 0x502, 0x4ff, 0x4fb, 0x4f8,
0x4f4, 0x4f1, 0x4ed, 0x4ea, 0x4e7, 0x4e3, 0x4e0, 0x4dc,
0x4d9, 0x4d6, 0x4d2, 0x4cf, 0x4cc, 0x4c8, 0x4c5, 0x4c2,
0x4be, 0x4bb, 0x4b8, 0x4b5, 0x4b1, 0x4ae, 0x4ab, 0x4a8,
0x4a4, 0x4a1, 0x49e, 0x49b, 0x498, 0x494, 0x491, 0x48e,
0x48b, 0x488, 0x485, 0x482, 0x47e, 0x47b, 0x478, 0x475,
0x472, 0x46f, 0x46c, 0x469, 0x466, 0x463, 0x460, 0x45d,
0x45a, 0x457, 0x454, 0x451, 0x44e, 0x44b, 0x448, 0x445,
0x442, 0x43f, 0x43c, 0x439, 0x436, 0x433, 0x430, 0x42d,
0x42a, 0x428, 0x425, 0x422, 0x41f, 0x41c, 0x419, 0x416,
0x414, 0x411, 0x40e, 0x40b, 0x408, 0x406, 0x403, 0x400
};
/*
* freq mult table multiplied by 2
*
* 1/2, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 10, 12, 12, 15, 15
*/
static const Bit8u mt[16] = {
1, 2, 4, 6, 8, 10, 12, 14, 16, 18, 20, 20, 24, 24, 30, 30
};
/*
* ksl table
*/
static const Bit8u kslrom[16] = {
0, 32, 40, 45, 48, 51, 53, 55, 56, 58, 59, 60, 61, 62, 63, 64
};
static const Bit8u kslshift[4] = {
8, 1, 2, 0
};
/*
* envelope generator constants
*/
static const Bit8u eg_incstep[4][4] = {
{ 0, 0, 0, 0 },
{ 1, 0, 0, 0 },
{ 1, 0, 1, 0 },
{ 1, 1, 1, 0 }
};
/*
* address decoding
*/
static const Bit8s ad_slot[0x20] = {
0, 1, 2, 3, 4, 5, -1, -1, 6, 7, 8, 9, 10, 11, -1, -1,
12, 13, 14, 15, 16, 17, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
};
static const Bit8u ch_slot[18] = {
0, 1, 2, 6, 7, 8, 12, 13, 14, 18, 19, 20, 24, 25, 26, 30, 31, 32
};
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time. # Conflicts: # src/sound/mididevices/music_adlmidi_mididevice.cpp # src/sound/mididevices/music_opnmidi_mididevice.cpp # wadsrc/static/menudef.txt
2018-10-01 21:07:05 +00:00
/*
* Pan law table
*/
static const Bit16u panlawtable[] =
{
65535, 65529, 65514, 65489, 65454, 65409, 65354, 65289,
65214, 65129, 65034, 64929, 64814, 64689, 64554, 64410,
64255, 64091, 63917, 63733, 63540, 63336, 63123, 62901,
62668, 62426, 62175, 61914, 61644, 61364, 61075, 60776,
60468, 60151, 59825, 59489, 59145, 58791, 58428, 58057,
57676, 57287, 56889, 56482, 56067, 55643, 55211, 54770,
54320, 53863, 53397, 52923, 52441, 51951, 51453, 50947,
50433, 49912, 49383, 48846, 48302, 47750, 47191,
46340, /* Center left */
46340, /* Center right */
45472, 44885, 44291, 43690, 43083, 42469, 41848, 41221,
40588, 39948, 39303, 38651, 37994, 37330, 36661, 35986,
35306, 34621, 33930, 33234, 32533, 31827, 31116, 30400,
29680, 28955, 28225, 27492, 26754, 26012, 25266, 24516,
23762, 23005, 22244, 21480, 20713, 19942, 19169, 18392,
17613, 16831, 16046, 15259, 14469, 13678, 12884, 12088,
11291, 10492, 9691, 8888, 8085, 7280, 6473, 5666,
4858, 4050, 3240, 2431, 1620, 810, 0
};
Upgrade libADLMIDI and libOPNMIDI Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage") Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI) ADLMIDI 1.3.3 2018-06-19 * Fixed an inability to load another custom bank without of library re-initialization * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks * Fixed an incorrect processing of auto-flags * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) ADLMIDI 1.3.2 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.3.0 2018-06-19 * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Fixed an incorrect processing of auto-flags * MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.2.0 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for MAME YM2612 Emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) (cherry picked from commit ceec12056a7868c71ce8a3a8922af2abd8fad556)
2018-06-19 21:48:42 +00:00
/*
* Envelope generator
*/
typedef Bit16s(*envelope_sinfunc)(Bit16u phase, Bit16u envelope);
typedef void(*envelope_genfunc)(opl3_slot *slott);
static Bit16s OPL3_EnvelopeCalcExp(Bit32u level)
{
if (level > 0x1fff)
{
level = 0x1fff;
}
return (exprom[level & 0xff] << 1) >> (level >> 8);
}
static Bit16s OPL3_EnvelopeCalcSin0(Bit16u phase, Bit16u envelope)
{
Bit16u out = 0;
Bit16u neg = 0;
phase &= 0x3ff;
if (phase & 0x200)
{
neg = 0xffff;
}
if (phase & 0x100)
{
out = logsinrom[(phase & 0xff) ^ 0xff];
}
else
{
out = logsinrom[phase & 0xff];
}
return OPL3_EnvelopeCalcExp(out + (envelope << 3)) ^ neg;
}
static Bit16s OPL3_EnvelopeCalcSin1(Bit16u phase, Bit16u envelope)
{
Bit16u out = 0;
phase &= 0x3ff;
if (phase & 0x200)
{
out = 0x1000;
}
else if (phase & 0x100)
{
out = logsinrom[(phase & 0xff) ^ 0xff];
}
else
{
out = logsinrom[phase & 0xff];
}
return OPL3_EnvelopeCalcExp(out + (envelope << 3));
}
static Bit16s OPL3_EnvelopeCalcSin2(Bit16u phase, Bit16u envelope)
{
Bit16u out = 0;
phase &= 0x3ff;
if (phase & 0x100)
{
out = logsinrom[(phase & 0xff) ^ 0xff];
}
else
{
out = logsinrom[phase & 0xff];
}
return OPL3_EnvelopeCalcExp(out + (envelope << 3));
}
static Bit16s OPL3_EnvelopeCalcSin3(Bit16u phase, Bit16u envelope)
{
Bit16u out = 0;
phase &= 0x3ff;
if (phase & 0x100)
{
out = 0x1000;
}
else
{
out = logsinrom[phase & 0xff];
}
return OPL3_EnvelopeCalcExp(out + (envelope << 3));
}
static Bit16s OPL3_EnvelopeCalcSin4(Bit16u phase, Bit16u envelope)
{
Bit16u out = 0;
Bit16u neg = 0;
phase &= 0x3ff;
if ((phase & 0x300) == 0x100)
{
neg = 0xffff;
}
if (phase & 0x200)
{
out = 0x1000;
}
else if (phase & 0x80)
{
out = logsinrom[((phase ^ 0xff) << 1) & 0xff];
}
else
{
out = logsinrom[(phase << 1) & 0xff];
}
return OPL3_EnvelopeCalcExp(out + (envelope << 3)) ^ neg;
}
static Bit16s OPL3_EnvelopeCalcSin5(Bit16u phase, Bit16u envelope)
{
Bit16u out = 0;
phase &= 0x3ff;
if (phase & 0x200)
{
out = 0x1000;
}
else if (phase & 0x80)
{
out = logsinrom[((phase ^ 0xff) << 1) & 0xff];
}
else
{
out = logsinrom[(phase << 1) & 0xff];
}
return OPL3_EnvelopeCalcExp(out + (envelope << 3));
}
static Bit16s OPL3_EnvelopeCalcSin6(Bit16u phase, Bit16u envelope)
{
Bit16u neg = 0;
phase &= 0x3ff;
if (phase & 0x200)
{
neg = 0xffff;
}
return OPL3_EnvelopeCalcExp(envelope << 3) ^ neg;
}
static Bit16s OPL3_EnvelopeCalcSin7(Bit16u phase, Bit16u envelope)
{
Bit16u out = 0;
Bit16u neg = 0;
phase &= 0x3ff;
if (phase & 0x200)
{
neg = 0xffff;
phase = (phase & 0x1ff) ^ 0x1ff;
}
out = phase << 3;
return OPL3_EnvelopeCalcExp(out + (envelope << 3)) ^ neg;
}
static const envelope_sinfunc envelope_sin[8] = {
OPL3_EnvelopeCalcSin0,
OPL3_EnvelopeCalcSin1,
OPL3_EnvelopeCalcSin2,
OPL3_EnvelopeCalcSin3,
OPL3_EnvelopeCalcSin4,
OPL3_EnvelopeCalcSin5,
OPL3_EnvelopeCalcSin6,
OPL3_EnvelopeCalcSin7
};
enum envelope_gen_num
{
envelope_gen_num_attack = 0,
envelope_gen_num_decay = 1,
envelope_gen_num_sustain = 2,
envelope_gen_num_release = 3
};
static void OPL3_EnvelopeUpdateKSL(opl3_slot *slot)
{
Bit16s ksl = (kslrom[slot->channel->f_num >> 6] << 2)
- ((0x08 - slot->channel->block) << 5);
if (ksl < 0)
{
ksl = 0;
}
slot->eg_ksl = (Bit8u)ksl;
}
static void OPL3_EnvelopeCalc(opl3_slot *slot)
{
Bit8u nonzero;
Bit8u rate;
Bit8u rate_hi;
Bit8u rate_lo;
Bit8u reg_rate = 0;
Bit8u ks;
Bit8u eg_shift, shift;
Bit16u eg_rout;
Bit16s eg_inc;
Bit8u eg_off;
Bit8u reset = 0;
slot->eg_out = slot->eg_rout + (slot->reg_tl << 2)
+ (slot->eg_ksl >> kslshift[slot->reg_ksl]) + *slot->trem;
if (slot->key && slot->eg_gen == envelope_gen_num_release)
{
reset = 1;
reg_rate = slot->reg_ar;
}
else
{
switch (slot->eg_gen)
{
case envelope_gen_num_attack:
reg_rate = slot->reg_ar;
break;
case envelope_gen_num_decay:
reg_rate = slot->reg_dr;
break;
case envelope_gen_num_sustain:
if (!slot->reg_type)
{
reg_rate = slot->reg_rr;
}
break;
case envelope_gen_num_release:
reg_rate = slot->reg_rr;
break;
}
}
slot->pg_reset = reset;
ks = slot->channel->ksv >> ((slot->reg_ksr ^ 1) << 1);
nonzero = (reg_rate != 0);
rate = ks + (reg_rate << 2);
rate_hi = rate >> 2;
rate_lo = rate & 0x03;
if (rate_hi & 0x10)
{
rate_hi = 0x0f;
}
eg_shift = rate_hi + slot->chip->eg_add;
shift = 0;
if (nonzero)
{
if (rate_hi < 12)
{
if (slot->chip->eg_state)
{
switch (eg_shift)
{
case 12:
shift = 1;
break;
case 13:
shift = (rate_lo >> 1) & 0x01;
break;
case 14:
shift = rate_lo & 0x01;
break;
default:
break;
}
}
}
else
{
shift = (rate_hi & 0x03) + eg_incstep[rate_lo][slot->chip->timer & 0x03];
if (shift & 0x04)
{
shift = 0x03;
}
if (!shift)
{
shift = slot->chip->eg_state;
}
}
}
eg_rout = slot->eg_rout;
eg_inc = 0;
eg_off = 0;
/* Instant attack */
if (reset && rate_hi == 0x0f)
{
eg_rout = 0x00;
}
/* Envelope off */
if ((slot->eg_rout & 0x1f8) == 0x1f8)
{
eg_off = 1;
}
if (slot->eg_gen != envelope_gen_num_attack && !reset && eg_off)
{
eg_rout = 0x1ff;
}
switch (slot->eg_gen)
{
case envelope_gen_num_attack:
if (!slot->eg_rout)
{
slot->eg_gen = envelope_gen_num_decay;
}
else if (slot->key && shift > 0 && rate_hi != 0x0f)
{
eg_inc = ((~slot->eg_rout) << shift) >> 4;
}
break;
case envelope_gen_num_decay:
if ((slot->eg_rout >> 4) == slot->reg_sl)
{
slot->eg_gen = envelope_gen_num_sustain;
}
else if (!eg_off && !reset && shift > 0)
{
eg_inc = 1 << (shift - 1);
}
break;
case envelope_gen_num_sustain:
case envelope_gen_num_release:
if (!eg_off && !reset && shift > 0)
{
eg_inc = 1 << (shift - 1);
}
break;
}
slot->eg_rout = (eg_rout + eg_inc) & 0x1ff;
/* Key off */
if (reset)
{
slot->eg_gen = envelope_gen_num_attack;
}
if (!slot->key)
{
slot->eg_gen = envelope_gen_num_release;
}
}
static void OPL3_EnvelopeKeyOn(opl3_slot *slot, Bit8u type)
{
slot->key |= type;
}
static void OPL3_EnvelopeKeyOff(opl3_slot *slot, Bit8u type)
{
slot->key &= ~type;
}
/*
* Phase Generator
*/
static void OPL3_PhaseGenerate(opl3_slot *slot)
{
opl3_chip *chip;
Bit16u f_num;
Bit32u basefreq;
Bit8u rm_xor, n_bit;
Bit32u noise;
Bit16u phase;
chip = slot->chip;
f_num = slot->channel->f_num;
if (slot->reg_vib)
{
Bit8s range;
Bit8u vibpos;
range = (f_num >> 7) & 7;
vibpos = slot->chip->vibpos;
if (!(vibpos & 3))
{
range = 0;
}
else if (vibpos & 1)
{
range >>= 1;
}
range >>= slot->chip->vibshift;
if (vibpos & 4)
{
range = -range;
}
f_num += range;
}
basefreq = (f_num << slot->channel->block) >> 1;
phase = (Bit16u)(slot->pg_phase >> 9);
if (slot->pg_reset)
{
slot->pg_phase = 0;
}
slot->pg_phase += (basefreq * mt[slot->reg_mult]) >> 1;
/* Rhythm mode */
noise = chip->noise;
slot->pg_phase_out = phase;
if (slot->slot_num == 13) /* hh */
{
chip->rm_hh_bit2 = (phase >> 2) & 1;
chip->rm_hh_bit3 = (phase >> 3) & 1;
chip->rm_hh_bit7 = (phase >> 7) & 1;
chip->rm_hh_bit8 = (phase >> 8) & 1;
}
if (slot->slot_num == 17 && (chip->rhy & 0x20)) /* tc */
{
chip->rm_tc_bit3 = (phase >> 3) & 1;
chip->rm_tc_bit5 = (phase >> 5) & 1;
}
if (chip->rhy & 0x20)
{
rm_xor = (chip->rm_hh_bit2 ^ chip->rm_hh_bit7)
| (chip->rm_hh_bit3 ^ chip->rm_tc_bit5)
| (chip->rm_tc_bit3 ^ chip->rm_tc_bit5);
switch (slot->slot_num)
{
case 13: /* hh */
slot->pg_phase_out = rm_xor << 9;
if (rm_xor ^ (noise & 1))
{
slot->pg_phase_out |= 0xd0;
}
else
{
slot->pg_phase_out |= 0x34;
}
break;
case 16: /* sd */
slot->pg_phase_out = (chip->rm_hh_bit8 << 9)
| ((chip->rm_hh_bit8 ^ (noise & 1)) << 8);
break;
case 17: /* tc */
slot->pg_phase_out = (rm_xor << 9) | 0x80;
break;
default:
break;
}
}
n_bit = ((noise >> 14) ^ noise) & 0x01;
chip->noise = (noise >> 1) | (n_bit << 22);
}
/*
* Slot
*/
static void OPL3_SlotWrite20(opl3_slot *slot, Bit8u data)
{
if ((data >> 7) & 0x01)
{
slot->trem = &slot->chip->tremolo;
}
else
{
slot->trem = (Bit8u*)&slot->chip->zeromod;
}
slot->reg_vib = (data >> 6) & 0x01;
slot->reg_type = (data >> 5) & 0x01;
slot->reg_ksr = (data >> 4) & 0x01;
slot->reg_mult = data & 0x0f;
}
static void OPL3_SlotWrite40(opl3_slot *slot, Bit8u data)
{
slot->reg_ksl = (data >> 6) & 0x03;
slot->reg_tl = data & 0x3f;
OPL3_EnvelopeUpdateKSL(slot);
}
static void OPL3_SlotWrite60(opl3_slot *slot, Bit8u data)
{
slot->reg_ar = (data >> 4) & 0x0f;
slot->reg_dr = data & 0x0f;
}
static void OPL3_SlotWrite80(opl3_slot *slot, Bit8u data)
{
slot->reg_sl = (data >> 4) & 0x0f;
if (slot->reg_sl == 0x0f)
{
slot->reg_sl = 0x1f;
}
slot->reg_rr = data & 0x0f;
}
static void OPL3_SlotWriteE0(opl3_slot *slot, Bit8u data)
{
slot->reg_wf = data & 0x07;
if (slot->chip->newm == 0x00)
{
slot->reg_wf &= 0x03;
}
}
static void OPL3_SlotGenerate(opl3_slot *slot)
{
slot->out = envelope_sin[slot->reg_wf](slot->pg_phase_out + *slot->mod, slot->eg_out);
}
static void OPL3_SlotCalcFB(opl3_slot *slot)
{
if (slot->channel->fb != 0x00)
{
slot->fbmod = (slot->prout + slot->out) >> (0x09 - slot->channel->fb);
}
else
{
slot->fbmod = 0;
}
slot->prout = slot->out;
}
/*
* Channel
*/
static void OPL3_ChannelSetupAlg(opl3_channel *channel);
static void OPL3_ChannelUpdateRhythm(opl3_chip *chip, Bit8u data)
{
opl3_channel *channel6;
opl3_channel *channel7;
opl3_channel *channel8;
Bit8u chnum;
chip->rhy = data & 0x3f;
if (chip->rhy & 0x20)
{
channel6 = &chip->channel[6];
channel7 = &chip->channel[7];
channel8 = &chip->channel[8];
channel6->out[0] = &channel6->slotz[1]->out;
channel6->out[1] = &channel6->slotz[1]->out;
channel6->out[2] = &chip->zeromod;
channel6->out[3] = &chip->zeromod;
channel7->out[0] = &channel7->slotz[0]->out;
channel7->out[1] = &channel7->slotz[0]->out;
channel7->out[2] = &channel7->slotz[1]->out;
channel7->out[3] = &channel7->slotz[1]->out;
channel8->out[0] = &channel8->slotz[0]->out;
channel8->out[1] = &channel8->slotz[0]->out;
channel8->out[2] = &channel8->slotz[1]->out;
channel8->out[3] = &channel8->slotz[1]->out;
for (chnum = 6; chnum < 9; chnum++)
{
chip->channel[chnum].chtype = ch_drum;
}
OPL3_ChannelSetupAlg(channel6);
OPL3_ChannelSetupAlg(channel7);
OPL3_ChannelSetupAlg(channel8);
/* hh */
if (chip->rhy & 0x01)
{
OPL3_EnvelopeKeyOn(channel7->slotz[0], egk_drum);
}
else
{
OPL3_EnvelopeKeyOff(channel7->slotz[0], egk_drum);
}
/* tc */
if (chip->rhy & 0x02)
{
OPL3_EnvelopeKeyOn(channel8->slotz[1], egk_drum);
}
else
{
OPL3_EnvelopeKeyOff(channel8->slotz[1], egk_drum);
}
/* tom */
if (chip->rhy & 0x04)
{
OPL3_EnvelopeKeyOn(channel8->slotz[0], egk_drum);
}
else
{
OPL3_EnvelopeKeyOff(channel8->slotz[0], egk_drum);
}
/* sd */
if (chip->rhy & 0x08)
{
OPL3_EnvelopeKeyOn(channel7->slotz[1], egk_drum);
}
else
{
OPL3_EnvelopeKeyOff(channel7->slotz[1], egk_drum);
}
/* bd */
if (chip->rhy & 0x10)
{
OPL3_EnvelopeKeyOn(channel6->slotz[0], egk_drum);
OPL3_EnvelopeKeyOn(channel6->slotz[1], egk_drum);
}
else
{
OPL3_EnvelopeKeyOff(channel6->slotz[0], egk_drum);
OPL3_EnvelopeKeyOff(channel6->slotz[1], egk_drum);
}
}
else
{
for (chnum = 6; chnum < 9; chnum++)
{
chip->channel[chnum].chtype = ch_2op;
OPL3_ChannelSetupAlg(&chip->channel[chnum]);
OPL3_EnvelopeKeyOff(chip->channel[chnum].slotz[0], egk_drum);
OPL3_EnvelopeKeyOff(chip->channel[chnum].slotz[1], egk_drum);
}
}
}
static void OPL3_ChannelWriteA0(opl3_channel *channel, Bit8u data)
{
if (channel->chip->newm && channel->chtype == ch_4op2)
{
return;
}
channel->f_num = (channel->f_num & 0x300) | data;
channel->ksv = (channel->block << 1)
| ((channel->f_num >> (0x09 - channel->chip->nts)) & 0x01);
OPL3_EnvelopeUpdateKSL(channel->slotz[0]);
OPL3_EnvelopeUpdateKSL(channel->slotz[1]);
if (channel->chip->newm && channel->chtype == ch_4op)
{
channel->pair->f_num = channel->f_num;
channel->pair->ksv = channel->ksv;
OPL3_EnvelopeUpdateKSL(channel->pair->slotz[0]);
OPL3_EnvelopeUpdateKSL(channel->pair->slotz[1]);
}
}
static void OPL3_ChannelWriteB0(opl3_channel *channel, Bit8u data)
{
if (channel->chip->newm && channel->chtype == ch_4op2)
{
return;
}
channel->f_num = (channel->f_num & 0xff) | ((data & 0x03) << 8);
channel->block = (data >> 2) & 0x07;
channel->ksv = (channel->block << 1)
| ((channel->f_num >> (0x09 - channel->chip->nts)) & 0x01);
OPL3_EnvelopeUpdateKSL(channel->slotz[0]);
OPL3_EnvelopeUpdateKSL(channel->slotz[1]);
if (channel->chip->newm && channel->chtype == ch_4op)
{
channel->pair->f_num = channel->f_num;
channel->pair->block = channel->block;
channel->pair->ksv = channel->ksv;
OPL3_EnvelopeUpdateKSL(channel->pair->slotz[0]);
OPL3_EnvelopeUpdateKSL(channel->pair->slotz[1]);
}
}
static void OPL3_ChannelSetupAlg(opl3_channel *channel)
{
if (channel->chtype == ch_drum)
{
if (channel->ch_num == 7 || channel->ch_num == 8)
{
channel->slotz[0]->mod = &channel->chip->zeromod;
channel->slotz[1]->mod = &channel->chip->zeromod;
return;
}
switch (channel->alg & 0x01)
{
case 0x00:
channel->slotz[0]->mod = &channel->slotz[0]->fbmod;
channel->slotz[1]->mod = &channel->slotz[0]->out;
break;
case 0x01:
channel->slotz[0]->mod = &channel->slotz[0]->fbmod;
channel->slotz[1]->mod = &channel->chip->zeromod;
break;
}
return;
}
if (channel->alg & 0x08)
{
return;
}
if (channel->alg & 0x04)
{
channel->pair->out[0] = &channel->chip->zeromod;
channel->pair->out[1] = &channel->chip->zeromod;
channel->pair->out[2] = &channel->chip->zeromod;
channel->pair->out[3] = &channel->chip->zeromod;
switch (channel->alg & 0x03)
{
case 0x00:
channel->pair->slotz[0]->mod = &channel->pair->slotz[0]->fbmod;
channel->pair->slotz[1]->mod = &channel->pair->slotz[0]->out;
channel->slotz[0]->mod = &channel->pair->slotz[1]->out;
channel->slotz[1]->mod = &channel->slotz[0]->out;
channel->out[0] = &channel->slotz[1]->out;
channel->out[1] = &channel->chip->zeromod;
channel->out[2] = &channel->chip->zeromod;
channel->out[3] = &channel->chip->zeromod;
break;
case 0x01:
channel->pair->slotz[0]->mod = &channel->pair->slotz[0]->fbmod;
channel->pair->slotz[1]->mod = &channel->pair->slotz[0]->out;
channel->slotz[0]->mod = &channel->chip->zeromod;
channel->slotz[1]->mod = &channel->slotz[0]->out;
channel->out[0] = &channel->pair->slotz[1]->out;
channel->out[1] = &channel->slotz[1]->out;
channel->out[2] = &channel->chip->zeromod;
channel->out[3] = &channel->chip->zeromod;
break;
case 0x02:
channel->pair->slotz[0]->mod = &channel->pair->slotz[0]->fbmod;
channel->pair->slotz[1]->mod = &channel->chip->zeromod;
channel->slotz[0]->mod = &channel->pair->slotz[1]->out;
channel->slotz[1]->mod = &channel->slotz[0]->out;
channel->out[0] = &channel->pair->slotz[0]->out;
channel->out[1] = &channel->slotz[1]->out;
channel->out[2] = &channel->chip->zeromod;
channel->out[3] = &channel->chip->zeromod;
break;
case 0x03:
channel->pair->slotz[0]->mod = &channel->pair->slotz[0]->fbmod;
channel->pair->slotz[1]->mod = &channel->chip->zeromod;
channel->slotz[0]->mod = &channel->pair->slotz[1]->out;
channel->slotz[1]->mod = &channel->chip->zeromod;
channel->out[0] = &channel->pair->slotz[0]->out;
channel->out[1] = &channel->slotz[0]->out;
channel->out[2] = &channel->slotz[1]->out;
channel->out[3] = &channel->chip->zeromod;
break;
}
}
else
{
switch (channel->alg & 0x01)
{
case 0x00:
channel->slotz[0]->mod = &channel->slotz[0]->fbmod;
channel->slotz[1]->mod = &channel->slotz[0]->out;
channel->out[0] = &channel->slotz[1]->out;
channel->out[1] = &channel->chip->zeromod;
channel->out[2] = &channel->chip->zeromod;
channel->out[3] = &channel->chip->zeromod;
break;
case 0x01:
channel->slotz[0]->mod = &channel->slotz[0]->fbmod;
channel->slotz[1]->mod = &channel->chip->zeromod;
channel->out[0] = &channel->slotz[0]->out;
channel->out[1] = &channel->slotz[1]->out;
channel->out[2] = &channel->chip->zeromod;
channel->out[3] = &channel->chip->zeromod;
break;
}
}
}
static void OPL3_ChannelWriteC0(opl3_channel *channel, Bit8u data)
{
channel->fb = (data & 0x0e) >> 1;
channel->con = data & 0x01;
channel->alg = channel->con;
if (channel->chip->newm)
{
if (channel->chtype == ch_4op)
{
channel->pair->alg = 0x04 | (channel->con << 1) | (channel->pair->con);
channel->alg = 0x08;
OPL3_ChannelSetupAlg(channel->pair);
}
else if (channel->chtype == ch_4op2)
{
channel->alg = 0x04 | (channel->pair->con << 1) | (channel->con);
channel->pair->alg = 0x08;
OPL3_ChannelSetupAlg(channel);
}
else
{
OPL3_ChannelSetupAlg(channel);
}
}
else
{
OPL3_ChannelSetupAlg(channel);
}
if (channel->chip->newm)
{
channel->cha = ((data >> 4) & 0x01) ? ~0 : 0;
channel->chb = ((data >> 5) & 0x01) ? ~0 : 0;
}
else
{
channel->cha = channel->chb = (Bit16u)~0;
}
}
static void OPL3_ChannelKeyOn(opl3_channel *channel)
{
if (channel->chip->newm)
{
if (channel->chtype == ch_4op)
{
OPL3_EnvelopeKeyOn(channel->slotz[0], egk_norm);
OPL3_EnvelopeKeyOn(channel->slotz[1], egk_norm);
OPL3_EnvelopeKeyOn(channel->pair->slotz[0], egk_norm);
OPL3_EnvelopeKeyOn(channel->pair->slotz[1], egk_norm);
}
else if (channel->chtype == ch_2op || channel->chtype == ch_drum)
{
OPL3_EnvelopeKeyOn(channel->slotz[0], egk_norm);
OPL3_EnvelopeKeyOn(channel->slotz[1], egk_norm);
}
}
else
{
OPL3_EnvelopeKeyOn(channel->slotz[0], egk_norm);
OPL3_EnvelopeKeyOn(channel->slotz[1], egk_norm);
}
}
static void OPL3_ChannelKeyOff(opl3_channel *channel)
{
if (channel->chip->newm)
{
if (channel->chtype == ch_4op)
{
OPL3_EnvelopeKeyOff(channel->slotz[0], egk_norm);
OPL3_EnvelopeKeyOff(channel->slotz[1], egk_norm);
OPL3_EnvelopeKeyOff(channel->pair->slotz[0], egk_norm);
OPL3_EnvelopeKeyOff(channel->pair->slotz[1], egk_norm);
}
else if (channel->chtype == ch_2op || channel->chtype == ch_drum)
{
OPL3_EnvelopeKeyOff(channel->slotz[0], egk_norm);
OPL3_EnvelopeKeyOff(channel->slotz[1], egk_norm);
}
}
else
{
OPL3_EnvelopeKeyOff(channel->slotz[0], egk_norm);
OPL3_EnvelopeKeyOff(channel->slotz[1], egk_norm);
}
}
static void OPL3_ChannelSet4Op(opl3_chip *chip, Bit8u data)
{
Bit8u bit;
Bit8u chnum;
for (bit = 0; bit < 6; bit++)
{
chnum = bit;
if (bit >= 3)
{
chnum += 9 - 3;
}
if ((data >> bit) & 0x01)
{
chip->channel[chnum].chtype = ch_4op;
chip->channel[chnum + 3].chtype = ch_4op2;
}
else
{
chip->channel[chnum].chtype = ch_2op;
chip->channel[chnum + 3].chtype = ch_2op;
}
}
}
static Bit16s OPL3_ClipSample(Bit32s sample)
{
if (sample > 32767)
{
sample = 32767;
}
else if (sample < -32768)
{
sample = -32768;
}
return (Bit16s)sample;
}
void OPL3_Generate(opl3_chip *chip, Bit16s *buf)
{
Bit8u ii;
Bit8u jj;
Bit16s accm;
Bit8u shift = 0;
buf[1] = OPL3_ClipSample(chip->mixbuff[1]);
for (ii = 0; ii < 15; ii++)
{
OPL3_SlotCalcFB(&chip->slot[ii]);
OPL3_EnvelopeCalc(&chip->slot[ii]);
OPL3_PhaseGenerate(&chip->slot[ii]);
OPL3_SlotGenerate(&chip->slot[ii]);
}
chip->mixbuff[0] = 0;
for (ii = 0; ii < 18; ii++)
{
accm = 0;
for (jj = 0; jj < 4; jj++)
{
accm += *chip->channel[ii].out[jj];
}
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time. # Conflicts: # src/sound/mididevices/music_adlmidi_mididevice.cpp # src/sound/mididevices/music_opnmidi_mididevice.cpp # wadsrc/static/menudef.txt
2018-10-01 21:07:05 +00:00
chip->mixbuff[0] += (Bit16s)((accm * chip->channel[ii].chl / 65535) & chip->channel[ii].cha);
Upgrade libADLMIDI and libOPNMIDI Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage") Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI) ADLMIDI 1.3.3 2018-06-19 * Fixed an inability to load another custom bank without of library re-initialization * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks * Fixed an incorrect processing of auto-flags * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) ADLMIDI 1.3.2 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.3.0 2018-06-19 * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Fixed an incorrect processing of auto-flags * MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.2.0 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for MAME YM2612 Emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) (cherry picked from commit ceec12056a7868c71ce8a3a8922af2abd8fad556)
2018-06-19 21:48:42 +00:00
}
for (ii = 15; ii < 18; ii++)
{
OPL3_SlotCalcFB(&chip->slot[ii]);
OPL3_EnvelopeCalc(&chip->slot[ii]);
OPL3_PhaseGenerate(&chip->slot[ii]);
OPL3_SlotGenerate(&chip->slot[ii]);
}
buf[0] = OPL3_ClipSample(chip->mixbuff[0]);
for (ii = 18; ii < 33; ii++)
{
OPL3_SlotCalcFB(&chip->slot[ii]);
OPL3_EnvelopeCalc(&chip->slot[ii]);
OPL3_PhaseGenerate(&chip->slot[ii]);
OPL3_SlotGenerate(&chip->slot[ii]);
}
chip->mixbuff[1] = 0;
for (ii = 0; ii < 18; ii++)
{
accm = 0;
for (jj = 0; jj < 4; jj++)
{
accm += *chip->channel[ii].out[jj];
}
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time. # Conflicts: # src/sound/mididevices/music_adlmidi_mididevice.cpp # src/sound/mididevices/music_opnmidi_mididevice.cpp # wadsrc/static/menudef.txt
2018-10-01 21:07:05 +00:00
chip->mixbuff[1] += (Bit16s)((accm * chip->channel[ii].chr / 65535) & chip->channel[ii].chb);
Upgrade libADLMIDI and libOPNMIDI Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage") Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI) ADLMIDI 1.3.3 2018-06-19 * Fixed an inability to load another custom bank without of library re-initialization * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks * Fixed an incorrect processing of auto-flags * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) ADLMIDI 1.3.2 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.3.0 2018-06-19 * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Fixed an incorrect processing of auto-flags * MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.2.0 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for MAME YM2612 Emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) (cherry picked from commit ceec12056a7868c71ce8a3a8922af2abd8fad556)
2018-06-19 21:48:42 +00:00
}
for (ii = 33; ii < 36; ii++)
{
OPL3_SlotCalcFB(&chip->slot[ii]);
OPL3_EnvelopeCalc(&chip->slot[ii]);
OPL3_PhaseGenerate(&chip->slot[ii]);
OPL3_SlotGenerate(&chip->slot[ii]);
}
if ((chip->timer & 0x3f) == 0x3f)
{
chip->tremolopos = (chip->tremolopos + 1) % 210;
}
if (chip->tremolopos < 105)
{
chip->tremolo = chip->tremolopos >> chip->tremoloshift;
}
else
{
chip->tremolo = (210 - chip->tremolopos) >> chip->tremoloshift;
}
if ((chip->timer & 0x3ff) == 0x3ff)
{
chip->vibpos = (chip->vibpos + 1) & 7;
}
chip->timer++;
chip->eg_add = 0;
if (chip->eg_timer)
{
while (shift < 36 && ((chip->eg_timer >> shift) & 1) == 0)
{
shift++;
}
if (shift > 12)
{
chip->eg_add = 0;
}
else
{
chip->eg_add = shift + 1;
}
}
if (chip->eg_timerrem || chip->eg_state)
{
if (chip->eg_timer == (uint64_t)0xfffffffffU)
{
chip->eg_timer = 0;
chip->eg_timerrem = 1;
}
else
{
chip->eg_timer++;
chip->eg_timerrem = 0;
}
}
chip->eg_state ^= 1;
while (chip->writebuf[chip->writebuf_cur].time <= chip->writebuf_samplecnt)
{
if (!(chip->writebuf[chip->writebuf_cur].reg & 0x200))
{
break;
}
chip->writebuf[chip->writebuf_cur].reg &= 0x1ff;
OPL3_WriteReg(chip, chip->writebuf[chip->writebuf_cur].reg,
chip->writebuf[chip->writebuf_cur].data);
chip->writebuf_cur = (chip->writebuf_cur + 1) % OPL_WRITEBUF_SIZE;
}
chip->writebuf_samplecnt++;
}
void OPL3_GenerateResampled(opl3_chip *chip, Bit16s *buf)
{
while (chip->samplecnt >= chip->rateratio)
{
chip->oldsamples[0] = chip->samples[0];
chip->oldsamples[1] = chip->samples[1];
OPL3_Generate(chip, chip->samples);
chip->samplecnt -= chip->rateratio;
}
buf[0] = (Bit16s)((chip->oldsamples[0] * (chip->rateratio - chip->samplecnt)
+ chip->samples[0] * chip->samplecnt) / chip->rateratio);
buf[1] = (Bit16s)((chip->oldsamples[1] * (chip->rateratio - chip->samplecnt)
+ chip->samples[1] * chip->samplecnt) / chip->rateratio);
chip->samplecnt += 1 << RSM_FRAC;
}
void OPL3_Reset(opl3_chip *chip, Bit32u samplerate)
{
Bit8u slotnum;
Bit8u channum;
memset(chip, 0, sizeof(opl3_chip));
for (slotnum = 0; slotnum < 36; slotnum++)
{
chip->slot[slotnum].chip = chip;
chip->slot[slotnum].mod = &chip->zeromod;
chip->slot[slotnum].eg_rout = 0x1ff;
chip->slot[slotnum].eg_out = 0x1ff;
chip->slot[slotnum].eg_gen = envelope_gen_num_release;
chip->slot[slotnum].trem = (Bit8u*)&chip->zeromod;
chip->slot[slotnum].slot_num = slotnum;
}
for (channum = 0; channum < 18; channum++)
{
chip->channel[channum].slotz[0] = &chip->slot[ch_slot[channum]];
chip->channel[channum].slotz[1] = &chip->slot[ch_slot[channum] + 3];
chip->slot[ch_slot[channum]].channel = &chip->channel[channum];
chip->slot[ch_slot[channum] + 3].channel = &chip->channel[channum];
if ((channum % 9) < 3)
{
chip->channel[channum].pair = &chip->channel[channum + 3];
}
else if ((channum % 9) < 6)
{
chip->channel[channum].pair = &chip->channel[channum - 3];
}
chip->channel[channum].chip = chip;
chip->channel[channum].out[0] = &chip->zeromod;
chip->channel[channum].out[1] = &chip->zeromod;
chip->channel[channum].out[2] = &chip->zeromod;
chip->channel[channum].out[3] = &chip->zeromod;
chip->channel[channum].chtype = ch_2op;
chip->channel[channum].cha = 0xffff;
chip->channel[channum].chb = 0xffff;
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time. # Conflicts: # src/sound/mididevices/music_adlmidi_mididevice.cpp # src/sound/mididevices/music_opnmidi_mididevice.cpp # wadsrc/static/menudef.txt
2018-10-01 21:07:05 +00:00
chip->channel[channum].chl = 46340;
chip->channel[channum].chr = 46340;
Upgrade libADLMIDI and libOPNMIDI Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage") Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI) ADLMIDI 1.3.3 2018-06-19 * Fixed an inability to load another custom bank without of library re-initialization * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks * Fixed an incorrect processing of auto-flags * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) ADLMIDI 1.3.2 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.3.0 2018-06-19 * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Fixed an incorrect processing of auto-flags * MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.2.0 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for MAME YM2612 Emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) (cherry picked from commit ceec12056a7868c71ce8a3a8922af2abd8fad556)
2018-06-19 21:48:42 +00:00
chip->channel[channum].ch_num = channum;
OPL3_ChannelSetupAlg(&chip->channel[channum]);
}
chip->noise = 1;
chip->rateratio = (samplerate << RSM_FRAC) / 49716;
chip->tremoloshift = 4;
chip->vibshift = 1;
}
Upgrade libADLMIDI and libOPNMIDI Added full-panning stereo, improvement of channel management, and many other things. Also, I have implemented an ability to use custom WOPL (for libADLMIDI) and WOPN (for libOPNMIDI) banks from the same path as "soundfonts", but also, in the same environment, the "fm_banks" folder was added for WOPL/WOPN storing purposes. To toggle usage of embedded or custom bank, I have added togglable booleans. When bank fails to be loaded, the default embedded bank is getting to be used as fallback. ADLMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Fixed correctness of CMF files playing * Fixed unnecessary overuse of chip channels by blank notes * Added API to disable specific MIDI tracks or play one of MIDI tracks solo * Added support for more complex loop (loopStart=XX, loopEnd=0). Where XX - count of loops, or 0 - infinite. Nested loops are supported without of any limits. * Added working implementation of TMB's velocity offset * Added support for full-panning stereo option (Thanks to [Christopher Snowhill](https://github.com/kode54) for a work!) * Fixed inability to play high notes due physical tone frequency out of range on the OPL3 chip OPNMIDI 1.4.0 2018-10-01 * Implemented a full support for Portamento! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for SysEx event handling! (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added support for GS way of custom drum channels (through SysEx events) * Ignore some NRPN events and lsb bank number when using GS standard (after catching of GS Reset SysEx call) * Added support for CC66-Sostenuto controller (Pedal hold of currently-pressed notes only while CC64 holds also all next notes) * Added support for CC67-SoftPedal controller (SoftPedal lowers the volume of notes played) * Resolved a trouble which sometimes makes a junk noise sound and unnecessary overuse of chip channels * Volume models support taken from libADLMIDI has been adapted to OPN2's chip speficis * Fixed inability to play high notes due physical tone frequency out of range on the OPN2 chip * Added support for full-panning stereo option ADL&OPN Hotfix: re-calculated default banks The fix on side of measurer of OPL3-BE and OPN2-BE where some instruments getting zero releasing time. # Conflicts: # src/sound/mididevices/music_adlmidi_mididevice.cpp # src/sound/mididevices/music_opnmidi_mididevice.cpp # wadsrc/static/menudef.txt
2018-10-01 21:07:05 +00:00
static void OPL3_ChannelWritePan(opl3_channel *channel, Bit8u data)
{
channel->chl = panlawtable[data & 0x7F];
channel->chr = panlawtable[0x7F - (data & 0x7F)];
}
void OPL3_WritePan(opl3_chip *chip, Bit16u reg, Bit8u v)
{
Bit8u high = (reg >> 8) & 0x01;
Bit8u regm = reg & 0xff;
OPL3_ChannelWritePan(&chip->channel[9 * high + (regm & 0x0f)], v);
}
Upgrade libADLMIDI and libOPNMIDI Added ability to switch emulator and it's accuracy level ("enabling of 'run at PCM rate' reduces accuracy, and also reduces CPU usage") Added draft code for future external banks support (WOPL format for ADLMIDI and WOPN format for OPNMIDI) ADLMIDI 1.3.3 2018-06-19 * Fixed an inability to load another custom bank without of library re-initialization * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect 4-op counter which is still catch 4-op instruments on 2-op banks * Fixed an incorrect processing of auto-flags * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Updated DosBox OPL3 emulator up to r4111 of official DosBox trunk (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * The automatical choosing of 4 operator channels count has been improved (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) ADLMIDI 1.3.2 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.3.0 2018-06-19 * Optimizing the MIDI banks management system for MultiBanks (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Fixed incorrect initial MIDI tempo when MIDI file doesn't includes the tempo event * Fixed an incorrect processing of auto-flags * MAME YM2612 now results a more accurate sound as internal using of native sample rate makes more correct sound generation * Channel and Note Aftertouch features are now supported correctly! Aftertouch is the tremolo / vibrato, NOT A VOLUME! * Added optional HQ resampler for Nuked OPL3 emulators which does usage of Zita-Resampler library (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) OPNMIDI 1.2.0 2018-04-24 * Added ability to disable MUS and XMI converters * Added ability to disable embedded MIDI sequencer to use library as RealTime synthesizer only or use any custom MIDI sequencer plugins. * Fixed blank instruments fallback in multi-bank support. When using non-zero bank, if instrument is blank, then, instrument will be taken from a root (I.e. zero bank). * Added support for real-time switching the emulator * Added support for MAME YM2612 Emulator * Added support for CC-120 - "All sound off" on the MIDI channel * Changed logic of CC-74 Brightness to affect sound only between 0 and 64 like real XG synthesizers. Ability to turn on a full-ranged brightness (to use full 0...127 range) is kept. * Added support for different output sample formats (PCM8, PCM8U, PCM16, PCM16U, PCM32, PCM32U, Float32, and Float64) (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) * Reworked MIDI channels management to avoid any memory reallocations while music processing for a hard real time. (Thanks to [Jean Pierre Cimalando](https://github.com/jpcima) for a work!) (cherry picked from commit ceec12056a7868c71ce8a3a8922af2abd8fad556)
2018-06-19 21:48:42 +00:00
void OPL3_WriteReg(opl3_chip *chip, Bit16u reg, Bit8u v)
{
Bit8u high = (reg >> 8) & 0x01;
Bit8u regm = reg & 0xff;
switch (regm & 0xf0)
{
case 0x00:
if (high)
{
switch (regm & 0x0f)
{
case 0x04:
OPL3_ChannelSet4Op(chip, v);
break;
case 0x05:
chip->newm = v & 0x01;
break;
}
}
else
{
switch (regm & 0x0f)
{
case 0x08:
chip->nts = (v >> 6) & 0x01;
break;
}
}
break;
case 0x20:
case 0x30:
if (ad_slot[regm & 0x1f] >= 0)
{
OPL3_SlotWrite20(&chip->slot[18 * high + ad_slot[regm & 0x1f]], v);
}
break;
case 0x40:
case 0x50:
if (ad_slot[regm & 0x1f] >= 0)
{
OPL3_SlotWrite40(&chip->slot[18 * high + ad_slot[regm & 0x1f]], v);
}
break;
case 0x60:
case 0x70:
if (ad_slot[regm & 0x1f] >= 0)
{
OPL3_SlotWrite60(&chip->slot[18 * high + ad_slot[regm & 0x1f]], v);
}
break;
case 0x80:
case 0x90:
if (ad_slot[regm & 0x1f] >= 0)
{
OPL3_SlotWrite80(&chip->slot[18 * high + ad_slot[regm & 0x1f]], v);
}
break;
case 0xe0:
case 0xf0:
if (ad_slot[regm & 0x1f] >= 0)
{
OPL3_SlotWriteE0(&chip->slot[18 * high + ad_slot[regm & 0x1f]], v);
}
break;
case 0xa0:
if ((regm & 0x0f) < 9)
{
OPL3_ChannelWriteA0(&chip->channel[9 * high + (regm & 0x0f)], v);
}
break;
case 0xb0:
if (regm == 0xbd && !high)
{
chip->tremoloshift = (((v >> 7) ^ 1) << 1) + 2;
chip->vibshift = ((v >> 6) & 0x01) ^ 1;
OPL3_ChannelUpdateRhythm(chip, v);
}
else if ((regm & 0x0f) < 9)
{
OPL3_ChannelWriteB0(&chip->channel[9 * high + (regm & 0x0f)], v);
if (v & 0x20)
{
OPL3_ChannelKeyOn(&chip->channel[9 * high + (regm & 0x0f)]);
}
else
{
OPL3_ChannelKeyOff(&chip->channel[9 * high + (regm & 0x0f)]);
}
}
break;
case 0xc0:
if ((regm & 0x0f) < 9)
{
OPL3_ChannelWriteC0(&chip->channel[9 * high + (regm & 0x0f)], v);
}
break;
}
}
void OPL3_WriteRegBuffered(opl3_chip *chip, Bit16u reg, Bit8u v)
{
Bit64u time1, time2;
if (chip->writebuf[chip->writebuf_last].reg & 0x200)
{
OPL3_WriteReg(chip, chip->writebuf[chip->writebuf_last].reg & 0x1ff,
chip->writebuf[chip->writebuf_last].data);
chip->writebuf_cur = (chip->writebuf_last + 1) % OPL_WRITEBUF_SIZE;
chip->writebuf_samplecnt = chip->writebuf[chip->writebuf_last].time;
}
chip->writebuf[chip->writebuf_last].reg = reg | 0x200;
chip->writebuf[chip->writebuf_last].data = v;
time1 = chip->writebuf_lasttime + OPL_WRITEBUF_DELAY;
time2 = chip->writebuf_samplecnt;
if (time1 < time2)
{
time1 = time2;
}
chip->writebuf[chip->writebuf_last].time = time1;
chip->writebuf_lasttime = time1;
chip->writebuf_last = (chip->writebuf_last + 1) % OPL_WRITEBUF_SIZE;
}
void OPL3_GenerateStream(opl3_chip *chip, Bit16s *sndptr, Bit32u numsamples)
{
Bit32u i;
for(i = 0; i < numsamples; i++)
{
OPL3_GenerateResampled(chip, sndptr);
sndptr += 2;
}
}
void OPL3_GenerateStreamMix(opl3_chip *chip, Bit16s *sndptr, Bit32u numsamples)
{
Bit32u i;
Bit16s sample[2];
for(i = 0; i < numsamples; i++)
{
OPL3_GenerateResampled(chip, sample);
sndptr[0] += sample[0];
sndptr[1] += sample[1];
sndptr += 2;
}
}