gzdoom-gles/src/gl/scene/gl_walls.cpp

/*
** gl_wall.cpp
** Wall rendering preparation
**
**---------------------------------------------------------------------------
** Copyright 2000-2005 Christoph Oelckers
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
**    notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
**    notice, this list of conditions and the following disclaimer in the
**    documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
**    derived from this software without specific prior written permission.
** 4. When not used as part of GZDoom or a GZDoom derivative, this code will be
**    covered by the terms of the GNU Lesser General Public License as published
**    by the Free Software Foundation; either version 2.1 of the License, or (at
**    your option) any later version.
** 5. Full disclosure of the entire project's source code, except for third
**    party libraries is mandatory. (NOTE: This clause is non-negotiable!)
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
**
*/

#include "gl/system/gl_system.h"
#include "p_local.h"
#include "p_lnspec.h"
#include "a_sharedglobal.h"
#include "g_level.h"
#include "templates.h"
#include "vectors.h"
#include "r_defs.h"
#include "r_sky.h"

#include "gl/system/gl_cvars.h"
#include "gl/renderer/gl_lightdata.h"
#include "gl/data/gl_data.h"
#include "gl/dynlights/gl_dynlight.h"
#include "gl/dynlights/gl_glow.h"
#include "gl/scene/gl_drawinfo.h"
#include "gl/scene/gl_portal.h"
#include "gl/textures/gl_material.h"
#include "gl/utility/gl_clock.h"
#include "gl/utility/gl_geometric.h"
#include "gl/utility/gl_templates.h"
#include "gl/shaders/gl_shader.h"


FMemArena GLWallLightEntryArena;

//==========================================================================
//
// Checks whether a wall should glow
//
//==========================================================================
void GLWall::CheckGlowing()
{
	bottomglowcolor[3] = topglowcolor[3] = 0;
	if (!gl_isFullbright(Colormap.LightColor, lightlevel))
	{
		FTexture *tex = TexMan[topflat];
		if (tex != NULL && tex->isGlowing())
		{
			flags |= GLWall::GLWF_GLOW;
			tex->GetGlowColor(topglowcolor);
			topglowcolor[3] = tex->gl_info.GlowHeight;
		}

		tex = TexMan[bottomflat];
		if (tex != NULL && tex->isGlowing())
		{
			flags |= GLWall::GLWF_GLOW;
			tex->GetGlowColor(bottomglowcolor);
			bottomglowcolor[3] = tex->gl_info.GlowHeight;
		}
	}
}


//==========================================================================
//
// 
//
//==========================================================================
void GLWall::PutWall(bool translucent)
{
	GLPortal * portal;
	int list;

	static char passflag[]={
		0,		//RENDERWALL_NONE,             
		1,		//RENDERWALL_TOP,              // unmasked
		1,		//RENDERWALL_M1S,              // unmasked
		2,		//RENDERWALL_M2S,              // depends on render and texture settings
		1,		//RENDERWALL_BOTTOM,           // unmasked
		4,		//RENDERWALL_SKYDOME,          // special
		3,		//RENDERWALL_FOGBOUNDARY,      // translucent
		4,		//RENDERWALL_HORIZON,          // special
		4,		//RENDERWALL_SKYBOX,           // special
		4,		//RENDERWALL_SECTORSTACK,      // special
		4,		//RENDERWALL_PLANEMIRROR,      // special
		4,		//RENDERWALL_MIRROR,           // special
		1,		//RENDERWALL_MIRRORSURFACE,    // only created here from RENDERWALL_MIRROR
		2,		//RENDERWALL_M2SNF,            // depends on render and texture settings, no fog, used on mid texture lines with a fog boundary.
		3,		//RENDERWALL_COLOR,            // translucent
		2,		//RENDERWALL_FFBLOCK           // depends on render and texture settings
	};
	
	if (gltexture && gltexture->GetTransparent() && passflag[type] == 2)
	{
		translucent = true;
	}

	if (gl_fixedcolormap) 
	{
		// light planes don't get drawn with fullbright rendering
		if (!gltexture && passflag[type]!=4) return;

		Colormap.Clear();
	}

	CheckGlowing();

	if (translucent) // translucent walls
	{
		viewdistance = P_AproxDistance( ((seg->linedef->v1->x+seg->linedef->v2->x)>>1) - viewx,
											((seg->linedef->v1->y+seg->linedef->v2->y)>>1) - viewy);
		gl_drawinfo->drawlists[GLDL_TRANSLUCENT].AddWall(this);
	}
	else if (passflag[type]!=4)	// non-translucent walls
	{

		bool masked;

		masked = passflag[type]==1? false : (gltexture && gltexture->isMasked());

		if ((flags&GLWF_SKYHACK && type == RENDERWALL_M2S))
		{
			list = GLDL_MASKEDWALLSOFS;
		}
		else
		{
			list = masked ? GLDL_MASKEDWALLS : GLDL_PLAINWALLS;
		}
		gl_drawinfo->drawlists[list].AddWall(this);

	}
	else switch (type)
	{
	// portals don't go into the draw list.
	// Instead they are added to the portal manager
	case RENDERWALL_HORIZON:
		horizon=UniqueHorizons.Get(horizon);
		portal=GLPortal::FindPortal(horizon);
		if (!portal) portal=new GLHorizonPortal(horizon);
		portal->AddLine(this);
		break;

	case RENDERWALL_SKYBOX:
		portal = GLPortal::FindPortal(skybox);
		if (!portal)
		{
			// either a regulat skybox or an Eternity-style horizon
			if (skybox->special1 != SKYBOX_MAP) portal = new GLEEHorizonPortal(skybox);
			else portal = new GLSkyboxPortal(skybox);
		}
		portal->AddLine(this);
		break;

	case RENDERWALL_SECTORSTACK:
		portal = this->portal->GetGLPortal();
		portal->AddLine(this);
		break;

	case RENDERWALL_PLANEMIRROR:
		if (GLPortal::PlaneMirrorMode * planemirror->c <=0)
		{
			//@sync-portal
			planemirror=UniquePlaneMirrors.Get(planemirror);
			portal=GLPortal::FindPortal(planemirror);
			if (!portal) portal=new GLPlaneMirrorPortal(planemirror);
			portal->AddLine(this);
		}
		break;

	case RENDERWALL_MIRROR:
		portal=GLPortal::FindPortal(seg->linedef);
		if (!portal) portal=new GLMirrorPortal(seg->linedef);
		portal->AddLine(this);
		if (gl_mirror_envmap) 
		{
			// draw a reflective layer over the mirror
			type=RENDERWALL_MIRRORSURFACE;
			gl_drawinfo->drawlists[GLDL_TRANSLUCENTBORDER].AddWall(this);
		}
		break;

	case RENDERWALL_SKY:
		portal=GLPortal::FindPortal(sky);
		if (!portal) portal=new GLSkyPortal(sky);
		portal->AddLine(this);
		break;
	}
}

//==========================================================================
//
//  Splits a wall vertically if a 3D-floor
//	creates different lighting across the wall
//
//==========================================================================

void GLWall::SplitWall(sector_t * frontsector, bool translucent)
{
	TArray<lightlist_t> & lightlist=frontsector->e->XFloor.lightlist;

	if (glseg.x1==glseg.x2 && glseg.y1==glseg.y2)
	{
		return;
	}
	::SplitWall.Clock();

	lightsize = lightlist.Size();
	lights = (GLWallLightEntry*)GLWallLightEntryArena.Alloc(sizeof(GLWallLightEntry)*lightsize);
	secplane_t *upperplane = &topplane;
	for (unsigned i = 0; i < lightlist.Size(); i++)
	{
		lights[i].cliptop = &lightlist[i].plane;
		lights[i].clipbottom = i == lightlist.Size() - 1 ? &bottomplane : &lightlist[i + 1].plane;
		lights[i].lightlevel = lightlist[i].caster != NULL? gl_ClampLight(*lightlist[i].p_lightlevel) : lightlevel;
		lights[i].colormap.FadeColor = Colormap.FadeColor;
		lights[i].colormap.CopyFrom3DLight(&lightlist[i]);
	}
	PutWall(translucent);
}


//==========================================================================
//
// 
//
//==========================================================================
bool GLWall::DoHorizon(seg_t * seg,sector_t * fs, vertex_t * v1,vertex_t * v2)
{
	GLHorizonInfo hi;
	lightlist_t * light;

	// ZDoom doesn't support slopes in a horizon sector so I won't either!
	ztop[1] = ztop[0] = FIXED2FLOAT(fs->GetPlaneTexZ(sector_t::ceiling));
	zbottom[1] = zbottom[0] = FIXED2FLOAT(fs->GetPlaneTexZ(sector_t::floor));

	if (viewz < fs->GetPlaneTexZ(sector_t::ceiling))
	{
		if (viewz > fs->GetPlaneTexZ(sector_t::floor))
			zbottom[1] = zbottom[0] = FIXED2FLOAT(viewz);

		if (fs->GetTexture(sector_t::ceiling) == skyflatnum)
		{
			SkyPlane(fs, sector_t::ceiling, false);
		}
		else
		{
			type = RENDERWALL_HORIZON;
			hi.plane.GetFromSector(fs, true);
			hi.lightlevel = gl_ClampLight(fs->GetCeilingLight());
			hi.colormap = fs->ColorMap;

			if (fs->e->XFloor.ffloors.Size())
			{
				light = P_GetPlaneLight(fs, &fs->ceilingplane, true);

				if(!(fs->GetFlags(sector_t::ceiling)&PLANEF_ABSLIGHTING)) hi.lightlevel = gl_ClampLight(*light->p_lightlevel);
				hi.colormap.LightColor = (light->extra_colormap)->Color;
			}

			if (gl_fixedcolormap) hi.colormap.Clear();
			horizon = &hi;
			PutWall(0);
		}
		ztop[1] = ztop[0] = zbottom[0];
	}

	if (viewz > fs->GetPlaneTexZ(sector_t::floor))
	{
		zbottom[1] = zbottom[0] = FIXED2FLOAT(fs->GetPlaneTexZ(sector_t::floor));
		if (fs->GetTexture(sector_t::floor) == skyflatnum)
		{
			SkyPlane(fs, sector_t::floor, false);
		}
		else
		{
			type = RENDERWALL_HORIZON;
			hi.plane.GetFromSector(fs, false);
			hi.lightlevel = gl_ClampLight(fs->GetFloorLight());
			hi.colormap = fs->ColorMap;

			if (fs->e->XFloor.ffloors.Size())
			{
				light = P_GetPlaneLight(fs, &fs->floorplane, false);

				if(!(fs->GetFlags(sector_t::floor)&PLANEF_ABSLIGHTING)) hi.lightlevel = gl_ClampLight(*light->p_lightlevel);
				hi.colormap.LightColor = (light->extra_colormap)->Color;
			}

			if (gl_fixedcolormap) hi.colormap.Clear();
			horizon = &hi;
			PutWall(0);
		}
	}
	return true;
}

//==========================================================================
//
// 
//
//==========================================================================
bool GLWall::SetWallCoordinates(seg_t * seg, FTexCoordInfo *tci, float texturetop,
								int topleft,int topright, int bottomleft,int bottomright, int t_ofs)
{
	//
	//
	// set up texture coordinate stuff
	//
	// 
	float l_ul;
	float texlength;

	if (gltexture) 
	{
		float length = seg->sidedef? seg->sidedef->TexelLength: Dist2(glseg.x1, glseg.y1, glseg.x2, glseg.y2);

		l_ul=tci->FloatToTexU(FIXED2FLOAT(tci->TextureOffset(t_ofs)));
		texlength = tci->FloatToTexU(length);
	}
	else 
	{
		tci=NULL;
		l_ul=0;
		texlength=0;
	}


	//
	//
	// set up coordinates for the left side of the polygon
	//
	// check left side for intersections
	if (topleft>=bottomleft)
	{
		// normal case
		ztop[0]=FIXED2FLOAT(topleft);
		zbottom[0]=FIXED2FLOAT(bottomleft);

		if (tci)
		{
			uplft.v=tci->FloatToTexV(-ztop[0] + texturetop);
			lolft.v=tci->FloatToTexV(-zbottom[0] + texturetop);
		}
	}
	else
	{
		// ceiling below floor - clip to the visible part of the wall
		fixed_t dch=topright-topleft;
		fixed_t dfh=bottomright-bottomleft;
		fixed_t coeff=FixedDiv(bottomleft-topleft, dch-dfh);

		fixed_t inter_y=topleft+FixedMul(coeff,dch);
											 
		float inter_x= FIXED2FLOAT(coeff);

		glseg.x1 = glseg.x1 + inter_x * (glseg.x2 - glseg.x1);
		glseg.y1 = glseg.y1 + inter_x * (glseg.y2 - glseg.y1);
		glseg.fracleft = inter_x;

		zbottom[0]=ztop[0]=FIXED2FLOAT(inter_y);	

		if (tci)
		{
			lolft.v=uplft.v=tci->FloatToTexV(-ztop[0] + texturetop);
		}
	}

	//
	//
	// set up coordinates for the right side of the polygon
	//
	// check left side for intersections
	if (topright >= bottomright)
	{
		// normal case
		ztop[1]=FIXED2FLOAT(topright);
		zbottom[1]=FIXED2FLOAT(bottomright);

		if (tci)
		{
			uprgt.v=tci->FloatToTexV(-ztop[1] + texturetop);
			lorgt.v=tci->FloatToTexV(-zbottom[1] + texturetop);
		}
	}
	else
	{
		// ceiling below floor - clip to the visible part of the wall
		fixed_t dch=topright-topleft;
		fixed_t dfh=bottomright-bottomleft;
		fixed_t coeff=FixedDiv(bottomleft-topleft, dch-dfh);

		fixed_t inter_y=topleft+FixedMul(coeff,dch);
											 
		float inter_x= FIXED2FLOAT(coeff);

		glseg.x2 = glseg.x1 + inter_x * (glseg.x2 - glseg.x1);
		glseg.y2 = glseg.y1 + inter_x * (glseg.y2 - glseg.y1);
		glseg.fracright = inter_x;

		zbottom[1]=ztop[1]=FIXED2FLOAT(inter_y);
		if (tci)
		{
			lorgt.v=uprgt.v=tci->FloatToTexV(-ztop[1] + texturetop);
		}
	}

	uplft.u = lolft.u = l_ul + texlength * glseg.fracleft;
	uprgt.u = lorgt.u = l_ul + texlength * glseg.fracright;

	if (gltexture != NULL)
	{
		bool normalize = false;
		if (gltexture->tex->bHasCanvas) normalize = true;
		else if (flags & GLT_CLAMPY)
		{
			// for negative scales we can get negative coordinates here.
			normalize = (uplft.v > lolft.v || uprgt.v > lorgt.v);
		}
		if (normalize)
		{
			// we have to shift the y-coordinate from [-1..0] to [0..1] when using texture clamping with a negative scale
			uplft.v+=1.f;
			uprgt.v+=1.f;
			lolft.v+=1.f;
			lorgt.v+=1.f;
		}
	}
	
	return true;
}

//==========================================================================
//
// Do some tweaks with the texture coordinates to reduce visual glitches
//
//==========================================================================

void GLWall::CheckTexturePosition()
{
	float sub;

	if (gltexture->tex->bHasCanvas) return;

	// clamp texture coordinates to a reasonable range.
	// Extremely large values can cause visual problems
	if (uplft.v < uprgt.v)
	{
		sub = float(xs_FloorToInt(uplft.v));
	}
	else
	{
		sub = float(xs_FloorToInt(uprgt.v));
	}
	uplft.v -= sub;
	uprgt.v -= sub;
	lolft.v -= sub;
	lorgt.v -= sub;

	if ((uplft.v == 0.f && uprgt.v == 0.f && lolft.v <= 1.f && lorgt.v <= 1.f) ||
		(uplft.v >= 0.f && uprgt.v >= 0.f && lolft.v == 1.f && lorgt.v == 1.f))
	{
		flags|=GLT_CLAMPY;
	}
}

//==========================================================================
//
//  Handle one sided walls, upper and lower texture
//
//==========================================================================
void GLWall::DoTexture(int _type,seg_t * seg, int peg,
					   int ceilingrefheight,int floorrefheight,
					   int topleft,int topright,
					   int bottomleft,int bottomright,
					   int v_offset)
{
	if (topleft<=bottomleft && topright<=bottomright) return;

	// The Vertex values can be destroyed in this function and must be restored aferward!
	GLSeg glsave=glseg;
	int lh=ceilingrefheight-floorrefheight;
	int texpos;

	switch (_type)
	{
	case RENDERWALL_TOP:
		texpos = side_t::top;
		break;
	case RENDERWALL_BOTTOM:
		texpos = side_t::bottom;
		break;
	default:
		texpos = side_t::mid;
		break;
	}

	FTexCoordInfo tci;

	gltexture->GetTexCoordInfo(&tci, seg->sidedef->GetTextureXScale(texpos), seg->sidedef->GetTextureYScale(texpos));

	type = (seg->linedef->special == Line_Mirror && _type == RENDERWALL_M1S && gl_mirrors) ? RENDERWALL_MIRROR : _type;

	float floatceilingref = FIXED2FLOAT(ceilingrefheight + tci.RowOffset(seg->sidedef->GetTextureYOffset(texpos)));
	if (peg) floatceilingref += tci.mRenderHeight - FIXED2FLOAT(lh + v_offset);

	if (!SetWallCoordinates(seg, &tci, floatceilingref, topleft, topright, bottomleft, bottomright, 
							seg->sidedef->GetTextureXOffset(texpos))) return;

	CheckTexturePosition();

	// Add this wall to the render list
	sector_t * sec = sub? sub->sector : seg->frontsector;

	if (sec->e->XFloor.lightlist.Size()==0 || gl_fixedcolormap) PutWall(false);
	else SplitWall(sec, false);

	glseg=glsave;
	flags&=~GLT_CLAMPY;
}


//==========================================================================
//
// 
//
//==========================================================================

void GLWall::DoMidTexture(seg_t * seg, bool drawfogboundary, 
						  sector_t * front, sector_t * back,
						  sector_t * realfront, sector_t * realback,
						  fixed_t fch1, fixed_t fch2, fixed_t ffh1, fixed_t ffh2,
						  fixed_t bch1, fixed_t bch2, fixed_t bfh1, fixed_t bfh2)
								
{
	FTexCoordInfo tci;
	fixed_t topleft,bottomleft,topright,bottomright;
	GLSeg glsave=glseg;
	fixed_t texturetop, texturebottom;
	bool wrap = (seg->linedef->flags&ML_WRAP_MIDTEX) || (seg->sidedef->Flags&WALLF_WRAP_MIDTEX);

	//
	//
	// Get the base coordinates for the texture
	//
	//
	if (gltexture)
	{
		// Align the texture to the ORIGINAL sector's height!!
		// At this point slopes don't matter because they don't affect the texture's z-position

		gltexture->GetTexCoordInfo(&tci, seg->sidedef->GetTextureXScale(side_t::mid), seg->sidedef->GetTextureYScale(side_t::mid));
		fixed_t rowoffset = tci.RowOffset(seg->sidedef->GetTextureYOffset(side_t::mid));
		if ( (seg->linedef->flags & ML_DONTPEGBOTTOM) >0)
		{
			texturebottom = MAX(realfront->GetPlaneTexZ(sector_t::floor),realback->GetPlaneTexZ(sector_t::floor))+rowoffset;
			texturetop=texturebottom+(tci.mRenderHeight << FRACBITS);
		}
		else
		{
			texturetop = MIN(realfront->GetPlaneTexZ(sector_t::ceiling),realback->GetPlaneTexZ(sector_t::ceiling))+rowoffset;
			texturebottom=texturetop-(tci.mRenderHeight << FRACBITS);
		}
	}
	else texturetop=texturebottom=0;

	//
	//
	// Depending on missing textures and possible plane intersections
	// decide which planes to use for the polygon
	//
	//
	if (realfront!=realback || drawfogboundary || wrap || realfront->GetHeightSec())
	{
		//
		//
		// Set up the top
		//
		//
		FTexture * tex = TexMan(seg->sidedef->GetTexture(side_t::top));
		if (!tex || tex->UseType==FTexture::TEX_Null)
		{
			if (front->GetTexture(sector_t::ceiling) == skyflatnum &&
				back->GetTexture(sector_t::ceiling) == skyflatnum)
			{
				// intra-sky lines do not clip the texture at all if there's no upper texture
				topleft = topright = texturetop;
			}
			else
			{
				// texture is missing - use the higher plane
				topleft = MAX(bch1,fch1);
				topright = MAX(bch2,fch2);
			}
		}
		else if ((bch1>fch1 || bch2>fch2) && 
				 (seg->frontsector->GetTexture(sector_t::ceiling)!=skyflatnum || seg->backsector->GetTexture(sector_t::ceiling)==skyflatnum)) 
				 // (!((bch1<=fch1 && bch2<=fch2) || (bch1>=fch1 && bch2>=fch2)))
		{
			// Use the higher plane and let the geometry clip the extruding part
			topleft = bch1;
			topright = bch2;
		}
		else
		{
			// But not if there can be visual artifacts.
			topleft = MIN(bch1,fch1);
			topright = MIN(bch2,fch2);
		}
		
		//
		//
		// Set up the bottom
		//
		//
		tex = TexMan(seg->sidedef->GetTexture(side_t::bottom));
		if (!tex || tex->UseType==FTexture::TEX_Null)
		{
			// texture is missing - use the lower plane
			bottomleft = MIN(bfh1,ffh1);
			bottomright = MIN(bfh2,ffh2);
		}
		else if (bfh1<ffh1 || bfh2<ffh2) // (!((bfh1<=ffh1 && bfh2<=ffh2) || (bfh1>=ffh1 && bfh2>=ffh2)))
		{
			// the floor planes intersect. Use the backsector's floor for drawing so that
			// drawing the front sector's plane clips the polygon automatically.
			bottomleft = bfh1;
			bottomright = bfh2;
		}
		else
		{
			// normal case - use the higher plane
			bottomleft = MAX(bfh1,ffh1);
			bottomright = MAX(bfh2,ffh2);
		}
		
		//
		//
		// if we don't need a fog sheet let's clip away some unnecessary parts of the polygon
		//
		//
		if (!drawfogboundary && !wrap)
		{
			if (texturetop<topleft && texturetop<topright) topleft=topright=texturetop;
			if (texturebottom>bottomleft && texturebottom>bottomright) bottomleft=bottomright=texturebottom;
		}
	}
	else
	{
		//
		//
		// if both sides of the line are in the same sector and the sector
		// doesn't have a Transfer_Heights special don't clip to the planes
		// Clipping to the planes is not necessary and can even produce
		// unwanted side effects.
		//
		//
		topleft=topright=texturetop;
		bottomleft=bottomright=texturebottom;
	}

	// nothing visible - skip the rest
	if (topleft<=bottomleft && topright<=bottomright) return;


	//
	//
	// set up texture coordinate stuff
	//
	// 
	fixed_t t_ofs = seg->sidedef->GetTextureXOffset(side_t::mid);

	if (gltexture)
	{
		// First adjust the texture offset so that the left edge of the linedef is inside the range [0..1].
		fixed_t texwidth = tci.TextureAdjustWidth()<<FRACBITS;
		
		t_ofs%=texwidth;
		if (t_ofs<-texwidth) t_ofs+=texwidth;	// shift negative results of % into positive range


		// Now check whether the linedef is completely within the texture range of [0..1].
		// If so we should use horizontal texture clamping to prevent filtering artifacts
		// at the edges.

		fixed_t textureoffset = tci.TextureOffset(t_ofs);
		int righttex=(textureoffset>>FRACBITS)+seg->sidedef->TexelLength;
		
		if ((textureoffset == 0 && righttex <= tci.mRenderWidth) ||
			(textureoffset >= 0 && righttex == tci.mRenderWidth))
		{
			flags |= GLT_CLAMPX;
		}
		else
		{
			flags&=~GLT_CLAMPX;
		}
		if (!wrap)
		{
			flags|=GLT_CLAMPY;
		}
	}
	SetWallCoordinates(seg, &tci, FIXED2FLOAT(texturetop), topleft, topright, bottomleft, bottomright, t_ofs);

	//
	//
	// draw fog sheet if required
	//
	// 
	if (drawfogboundary)
	{
		flags |= GLWF_NOSPLITUPPER|GLWF_NOSPLITLOWER;
		type=RENDERWALL_FOGBOUNDARY;
		PutWall(true);
		if (!gltexture) 
		{
			flags &= ~(GLWF_NOSPLITUPPER|GLWF_NOSPLITLOWER);
			return;
		}
		type=RENDERWALL_M2SNF;
	}
	else type=RENDERWALL_M2S;

	//
	//
	// set up alpha blending
	//
	// 
	if (seg->linedef->Alpha)// && seg->linedef->special!=Line_Fogsheet)
	{
		bool translucent = false;

		switch (seg->linedef->flags& ML_ADDTRANS)//TRANSBITS)
		{
		case 0:
			RenderStyle=STYLE_Translucent;
			alpha=FIXED2FLOAT(seg->linedef->Alpha);
			translucent = seg->linedef->Alpha < FRACUNIT || (gltexture && gltexture->GetTransparent());
			break;

		case ML_ADDTRANS:
			RenderStyle=STYLE_Add;
			alpha=FIXED2FLOAT(seg->linedef->Alpha);
			translucent=true;
			break;
		}

		//
		//
		// for textures with large empty areas only the visible parts are drawn.
		// If these textures come too close to the camera they severely affect performance
		// if stacked closely together
		// Recognizing vertical gaps is rather simple and well worth the effort.
		//
		//
		FloatRect *splitrect;
		int v = gltexture->GetAreas(&splitrect);
		if (seg->frontsector == seg->backsector) flags |= GLWF_NOSPLIT;	// we don't need to do vertex splits if a line has both sides in the same sector
		if (v>0 && !drawfogboundary && !(seg->linedef->flags&ML_WRAP_MIDTEX))
		{
			// split the poly!
			GLWall split;
			int i,t=0;
			float v_factor=(zbottom[0]-ztop[0])/(lolft.v-uplft.v);
			// only split the vertical area of the polygon that does not contain slopes.
			float splittopv = MAX(uplft.v, uprgt.v);
			float splitbotv = MIN(lolft.v, lorgt.v);

			// this is split vertically into sections.
			for(i=0;i<v;i++)
			{
				// the current segment is below the bottom line of the splittable area
				// (IOW. the whole wall has been done)
				if (splitrect[i].top>=splitbotv) break;

				float splitbot=splitrect[i].top+splitrect[i].height;

				// the current segment is above the top line of the splittable area
				if (splitbot<=splittopv) continue;

				split=*this;

				// the top line of the current segment is inside the splittable area
				// use the splitrect's top as top of this segment
				// if not use the top of the remaining polygon
				if (splitrect[i].top>splittopv)
				{
					split.ztop[0]=split.ztop[1]= ztop[0]+v_factor*(splitrect[i].top-uplft.v);
					split.uplft.v=split.uprgt.v=splitrect[i].top;
				}
				// the bottom line of the current segment is inside the splittable area
				// use the splitrect's bottom as bottom of this segment
				// if not use the bottom of the remaining polygon
				if (splitbot<=splitbotv)
				{
					split.zbottom[0]=split.zbottom[1]=ztop[0]+v_factor*(splitbot-uplft.v);
					split.lolft.v=split.lorgt.v=splitbot;
				}
				//
				//
				// Draw the stuff
				//
				//
				if (realfront->e->XFloor.lightlist.Size()==0 || gl_fixedcolormap) split.PutWall(translucent);
				else split.SplitWall(realfront, translucent);

				t=1;
			}
			render_texsplit+=t;
		}
		else
		{
			//
			//
			// Draw the stuff without splitting
			//
			//
			if (realfront->e->XFloor.lightlist.Size()==0 || gl_fixedcolormap) PutWall(translucent);
			else SplitWall(realfront, translucent);
		}
		alpha=1.0f;
	}
	// restore some values that have been altered in this function
	glseg=glsave;
	flags&=~(GLT_CLAMPX|GLT_CLAMPY|GLWF_NOSPLITUPPER|GLWF_NOSPLITLOWER);
}


//==========================================================================
//
// 
//
//==========================================================================
void GLWall::BuildFFBlock(seg_t * seg, F3DFloor * rover,
						  fixed_t ff_topleft, fixed_t ff_topright, 
						  fixed_t ff_bottomleft, fixed_t ff_bottomright)
{
	side_t * mastersd = rover->master->sidedef[0];
	float to;
	lightlist_t * light;
	bool translucent;
	int savelight=lightlevel;
	FColormap savecolor=Colormap;
	float ul;
	float texlength;
	FTexCoordInfo tci;

	if (rover->flags&FF_FOG)
	{
		if (!gl_fixedcolormap)
		{
			// this may not yet be done
			light=P_GetPlaneLight(rover->target, rover->top.plane,true);
			Colormap.Clear();
			Colormap.LightColor=(light->extra_colormap)->Fade;
			// the fog plane defines the light level, not the front sector
			lightlevel = gl_ClampLight(*light->p_lightlevel);
			gltexture=NULL;
			type=RENDERWALL_FFBLOCK;
		}
		else return;
	}
	else
	{
		
		if (rover->flags&FF_UPPERTEXTURE) 
		{
			gltexture = FMaterial::ValidateTexture(seg->sidedef->GetTexture(side_t::top), false,  true);
			if (!gltexture) return;
			gltexture->GetTexCoordInfo(&tci, seg->sidedef->GetTextureXScale(side_t::top), seg->sidedef->GetTextureYScale(side_t::top));
		}
		else if (rover->flags&FF_LOWERTEXTURE) 
		{
			gltexture = FMaterial::ValidateTexture(seg->sidedef->GetTexture(side_t::bottom), false, true);
			if (!gltexture) return;
			gltexture->GetTexCoordInfo(&tci, seg->sidedef->GetTextureXScale(side_t::bottom), seg->sidedef->GetTextureYScale(side_t::bottom));
		}
		else 
		{
			gltexture = FMaterial::ValidateTexture(mastersd->GetTexture(side_t::mid), false, true);
			if (!gltexture) return;
			gltexture->GetTexCoordInfo(&tci, mastersd->GetTextureXScale(side_t::mid), mastersd->GetTextureYScale(side_t::mid));
		}
			
		to=FIXED2FLOAT((rover->flags&(FF_UPPERTEXTURE|FF_LOWERTEXTURE))? 
			0 : tci.TextureOffset(mastersd->GetTextureXOffset(side_t::mid)));

		ul=tci.FloatToTexU(to + FIXED2FLOAT(tci.TextureOffset(seg->sidedef->GetTextureXOffset(side_t::mid))));

		texlength = tci.FloatToTexU(seg->sidedef->TexelLength);

		uplft.u = lolft.u = ul + texlength * glseg.fracleft;
		uprgt.u = lorgt.u = ul + texlength * glseg.fracright;
		
		fixed_t rowoffset = tci.RowOffset(seg->sidedef->GetTextureYOffset(side_t::mid));
		to= (rover->flags&(FF_UPPERTEXTURE|FF_LOWERTEXTURE))? 
				0.f : FIXED2FLOAT(tci.RowOffset(mastersd->GetTextureYOffset(side_t::mid)));
		
		to += FIXED2FLOAT(rowoffset);
		
		uplft.v=tci.FloatToTexV(to + FIXED2FLOAT(*rover->top.texheight-ff_topleft));
		uprgt.v=tci.FloatToTexV(to + FIXED2FLOAT(*rover->top.texheight-ff_topright));
		lolft.v=tci.FloatToTexV(to + FIXED2FLOAT(*rover->top.texheight-ff_bottomleft));
		lorgt.v=tci.FloatToTexV(to + FIXED2FLOAT(*rover->top.texheight-ff_bottomright));
		type=RENDERWALL_FFBLOCK;
		CheckTexturePosition();
	}

	ztop[0]=FIXED2FLOAT(ff_topleft);
	ztop[1]=FIXED2FLOAT(ff_topright);
	zbottom[0]=FIXED2FLOAT(ff_bottomleft);//-0.001f;
	zbottom[1]=FIXED2FLOAT(ff_bottomright);

	if (rover->flags&(FF_TRANSLUCENT|FF_ADDITIVETRANS|FF_FOG))
	{
		alpha=rover->alpha/255.0f;
		RenderStyle = (rover->flags&FF_ADDITIVETRANS)? STYLE_Add : STYLE_Translucent;
		translucent=true;
		type=gltexture? RENDERWALL_M2S:RENDERWALL_COLOR;
	}
	else 
	{
		alpha=1.0f;
		RenderStyle=STYLE_Normal;
		translucent=false;
	}
	
	sector_t * sec = sub? sub->sector : seg->frontsector;

	if (sec->e->XFloor.lightlist.Size()==0 || gl_fixedcolormap) PutWall(translucent);
	else SplitWall(sec, translucent);

	alpha=1.0f;
	lightlevel = savelight;
	Colormap = savecolor;
	flags&=~GLT_CLAMPY;
}


//==========================================================================
//
// 
//
//==========================================================================

__forceinline void GLWall::GetPlanePos(F3DFloor::planeref *planeref, int &left, int &right)
{
	if (planeref->plane->a | planeref->plane->b)
	{
		left=planeref->plane->ZatPoint(vertexes[0]);
		right=planeref->plane->ZatPoint(vertexes[1]);
	}
	else if(planeref->isceiling == sector_t::ceiling)
	{
		left = right = planeref->plane->d;
	}
	else
	{
		left = right = -planeref->plane->d;
	}
}

//==========================================================================
//
// 
//
//==========================================================================
void GLWall::InverseFloors(seg_t * seg, sector_t * frontsector,
						   fixed_t topleft, fixed_t topright, 
						   fixed_t bottomleft, fixed_t bottomright)
{
	TArray<F3DFloor *> & frontffloors=frontsector->e->XFloor.ffloors;

	for(unsigned int i=0;i<frontffloors.Size();i++)
	{
		F3DFloor * rover=frontffloors[i];
		if (!(rover->flags&FF_EXISTS)) continue;
		if (!(rover->flags&FF_RENDERSIDES)) continue;
		if (!(rover->flags&(FF_INVERTSIDES|FF_ALLSIDES))) continue;

		fixed_t ff_topleft;
		fixed_t ff_topright;
		fixed_t ff_bottomleft;
		fixed_t ff_bottomright;

		GetPlanePos(&rover->top, ff_topleft, ff_topright);
		GetPlanePos(&rover->bottom, ff_bottomleft, ff_bottomright);

		// above ceiling
		if (ff_bottomleft>topleft && ff_bottomright>topright) continue;

		if (ff_topleft>topleft && ff_topright>topright)
		{
			// the new section overlaps with the previous one - clip it!
			ff_topleft=topleft;
			ff_topright=topright;
		}
		if (ff_bottomleft<bottomleft && ff_bottomright<bottomright)
		{
			ff_bottomleft=bottomleft;
			ff_bottomright=bottomright;
		}
		if (ff_topleft<ff_bottomleft || ff_topright<ff_bottomright) continue;

		BuildFFBlock(seg, rover, ff_topleft, ff_topright, ff_bottomleft, ff_bottomright);
		topleft=ff_bottomleft;
		topright=ff_bottomright;

		if (topleft<=bottomleft && topright<=bottomright) return;
	}

}

//==========================================================================
//
// 
//
//==========================================================================
void GLWall::ClipFFloors(seg_t * seg, F3DFloor * ffloor, sector_t * frontsector,
						 fixed_t topleft, fixed_t topright, 
						 fixed_t bottomleft, fixed_t bottomright)
{
	TArray<F3DFloor *> & frontffloors=frontsector->e->XFloor.ffloors;

	int flags = ffloor->flags & (FF_SWIMMABLE|FF_TRANSLUCENT);

	for(unsigned int i=0;i<frontffloors.Size();i++)
	{
		F3DFloor * rover=frontffloors[i];
		if (!(rover->flags&FF_EXISTS)) continue;
		if (!(rover->flags&FF_RENDERSIDES)) continue;
		if ((rover->flags&(FF_SWIMMABLE|FF_TRANSLUCENT))!=flags) continue;

		fixed_t ff_topleft;
		fixed_t ff_topright;
		fixed_t ff_bottomleft;
		fixed_t ff_bottomright;

		GetPlanePos(&rover->top, ff_topleft, ff_topright);

		// we are completely below the bottom so unless there are some
		// (unsupported) intersections there won't be any more floors that
		// could clip this one.
		if (ff_topleft<bottomleft && ff_topright<bottomright) goto done;

		GetPlanePos(&rover->bottom, ff_bottomleft, ff_bottomright);
		// above top line?
		if (ff_bottomleft>topleft && ff_bottomright>topright) continue;

		// overlapping the top line
		if (ff_topleft>=topleft && ff_topright>=topright)
		{
			// overlapping with the entire range
			if (ff_bottomleft<=bottomleft && ff_bottomright<=bottomright) return;
			else if (ff_bottomleft>bottomleft && ff_bottomright>bottomright)
			{
				topleft=ff_bottomleft;
				topright=ff_bottomright;
			}
			else
			{
				// an intersecting case.
				// proper handling requires splitting but
				// I don't need this right now.
			}
		}
		else if (ff_topleft<=topleft && ff_topright<=topright)
		{
			BuildFFBlock(seg, ffloor, topleft, topright, ff_topleft, ff_topright);
			if (ff_bottomleft<=bottomleft && ff_bottomright<=bottomright) return;
			topleft=ff_bottomleft;
			topright=ff_bottomright;
		}
		else
		{
			// an intersecting case.
			// proper handling requires splitting but
			// I don't need this right now.
		}
	}

done:
	// if the program reaches here there is one block left to draw
	BuildFFBlock(seg, ffloor, topleft, topright, bottomleft, bottomright);
}

//==========================================================================
//
// 
//
//==========================================================================
void GLWall::DoFFloorBlocks(seg_t * seg,sector_t * frontsector,sector_t * backsector,
							fixed_t fch1, fixed_t fch2, fixed_t ffh1, fixed_t ffh2,
							fixed_t bch1, fixed_t bch2, fixed_t bfh1, fixed_t bfh2)

{
	TArray<F3DFloor *> & backffloors=backsector->e->XFloor.ffloors;
	fixed_t topleft, topright, bottomleft, bottomright;
	bool renderedsomething=false;

	// if the ceilings intersect use the backsector's height because this sector's ceiling will
	// obstruct the redundant parts.

	if (fch1<bch1 && fch2<bch2) 
	{
		topleft=fch1;
		topright=fch2;
	}
	else
	{
		topleft=bch1;
		topright=bch2;
	}

	if (ffh1>bfh1 && ffh2>bfh2) 
	{
		bottomleft=ffh1;
		bottomright=ffh2;
	}
	else
	{
		bottomleft=bfh1;
		bottomright=bfh2;
	}

	for(unsigned int i=0;i<backffloors.Size();i++)
	{
		F3DFloor * rover=backffloors[i];
		if (!(rover->flags&FF_EXISTS)) continue;
		if (!(rover->flags&FF_RENDERSIDES) || (rover->flags&FF_INVERTSIDES)) continue;

		fixed_t ff_topleft;
		fixed_t ff_topright;
		fixed_t ff_bottomleft;
		fixed_t ff_bottomright;

		GetPlanePos(&rover->top, ff_topleft, ff_topright);
		GetPlanePos(&rover->bottom, ff_bottomleft, ff_bottomright);

		// completely above ceiling
		if (ff_bottomleft>topleft && ff_bottomright>topright && !renderedsomething) continue;

		if (ff_topleft>topleft && ff_topright>topright)
		{
			// the new section overlaps with the previous one - clip it!
			ff_topleft=topleft;
			ff_topright=topright;
		}

		// do all inverse floors above the current one it there is a gap between the
		// last 3D floor and this one.
		if (topleft>ff_topleft && topright>ff_topright)
			InverseFloors(seg, frontsector, topleft, topright, ff_topleft, ff_topright);

		// if translucent or liquid clip away adjoining parts of the same type of FFloors on the other side
		if (rover->flags&(FF_SWIMMABLE|FF_TRANSLUCENT))
			ClipFFloors(seg, rover, frontsector, ff_topleft, ff_topright, ff_bottomleft, ff_bottomright);
		else
			BuildFFBlock(seg, rover, ff_topleft, ff_topright, ff_bottomleft, ff_bottomright);

		topleft=ff_bottomleft;
		topright=ff_bottomright;
		renderedsomething=true;
		if (topleft<=bottomleft && topright<=bottomright) return;
	}

	// draw all inverse floors below the lowest one
	if (frontsector->e->XFloor.ffloors.Size() > 0)
	{
		if (topleft>bottomleft || topright>bottomright)
			InverseFloors(seg, frontsector, topleft, topright, bottomleft, bottomright);
	}
}
	
//==========================================================================
//
// 
//
//==========================================================================
void GLWall::Process(seg_t *seg, sector_t * frontsector, sector_t * backsector)
{
	vertex_t * v1, *v2;
	fixed_t fch1;
	fixed_t ffh1;
	fixed_t fch2;
	fixed_t ffh2;
	sector_t * realfront;
	sector_t * realback;
	sector_t * segfront;
	sector_t * segback;

#ifdef _DEBUG
	if (seg->linedef-lines==904)
	{
		int a = 0;
	}
#endif

	// note: we always have a valid sidedef and linedef reference when getting here.

	this->seg = seg;

	if ((seg->sidedef->Flags & WALLF_POLYOBJ) && seg->backsector)
	{
		// Textures on 2-sided polyobjects are aligned to the actual seg's sectors
		segfront = realfront = seg->frontsector;
		segback = realback = seg->backsector;
	}
	else
	{
		// Need these for aligning the textures
		realfront = &sectors[frontsector->sectornum];
		realback = backsector ? &sectors[backsector->sectornum] : NULL;
		segfront = frontsector;
		segback = backsector;
	}

	if (seg->sidedef == seg->linedef->sidedef[0])
	{
		v1 = seg->linedef->v1;
		v2 = seg->linedef->v2;
	}
	else
	{
		v1 = seg->linedef->v2;
		v2 = seg->linedef->v1;
	}

	if (!(seg->sidedef->Flags & WALLF_POLYOBJ))
	{
		glseg.fracleft = 0;
		glseg.fracright = 1;
		if (gl_seamless)
		{
			if (v1->dirty) gl_RecalcVertexHeights(v1);
			if (v2->dirty) gl_RecalcVertexHeights(v2);
		}
	}
	else	// polyobjects must be rendered per seg.
	{
		if (abs(v1->x - v2->x) > abs(v1->y - v2->y))
		{
			glseg.fracleft = float(seg->v1->x - v1->x) / float(v2->x - v1->x);
			glseg.fracright = float(seg->v2->x - v1->x) / float(v2->x - v1->x);
		}
		else
		{
			glseg.fracleft = float(seg->v1->y - v1->y) / float(v2->y - v1->y);
			glseg.fracright = float(seg->v2->y - v1->y) / float(v2->y - v1->y);
		}
		v1 = seg->v1;
		v2 = seg->v2;
	}


	vertexes[0] = v1;
	vertexes[1] = v2;

	glseg.x1 = FIXED2FLOAT(v1->x);
	glseg.y1 = FIXED2FLOAT(v1->y);
	glseg.x2 = FIXED2FLOAT(v2->x);
	glseg.y2 = FIXED2FLOAT(v2->y);
	Colormap = frontsector->ColorMap;
	flags = 0;
	dynlightindex = UINT_MAX;
	lights = NULL;

	int rel = 0;
	int orglightlevel = gl_ClampLight(frontsector->lightlevel);
	bool foggy = (!gl_isBlack(Colormap.FadeColor) || level.flags&LEVEL_HASFADETABLE);	// fog disables fake contrast
	lightlevel = gl_ClampLight(seg->sidedef->GetLightLevel(foggy, orglightlevel, false, &rel));
	if (orglightlevel >= 253)			// with the software renderer fake contrast won't be visible above this.
	{
		rellight = 0;
	}
	else if (lightlevel - rel > 256)	// the brighter part of fake contrast will be clamped so also clamp the darker part by the same amount for better looks
	{
		rellight = 256 - lightlevel + rel;
	}
	else
	{
		rellight = rel;
	}

	alpha = 1.0f;
	RenderStyle = STYLE_Normal;
	gltexture = NULL;

	topflat = frontsector->GetTexture(sector_t::ceiling);	// for glowing textures. These must be saved because
	bottomflat = frontsector->GetTexture(sector_t::floor);	// the sector passed here might be a temporary copy.
	topplane = frontsector->ceilingplane;
	bottomplane = frontsector->floorplane;

	// Save a little time (up to 0.3 ms per frame ;) )
	if (frontsector->floorplane.a | frontsector->floorplane.b)
	{
		ffh1 = segfront->floorplane.ZatPoint(v1);
		ffh2 = segfront->floorplane.ZatPoint(v2);
		zfloor[0] = FIXED2FLOAT(ffh1);
		zfloor[1] = FIXED2FLOAT(ffh2);
	}
	else
	{
		ffh1 = ffh2 = -segfront->floorplane.d;
		zfloor[0] = zfloor[1] = FIXED2FLOAT(ffh2);
	}

	if (segfront->ceilingplane.a | segfront->ceilingplane.b)
	{
		fch1 = segfront->ceilingplane.ZatPoint(v1);
		fch2 = segfront->ceilingplane.ZatPoint(v2);
		zceil[0] = FIXED2FLOAT(fch1);
		zceil[1] = FIXED2FLOAT(fch2);
	}
	else
	{
		fch1 = fch2 = segfront->ceilingplane.d;
		zceil[0] = zceil[1] = FIXED2FLOAT(fch2);
	}


	if (seg->linedef->special == Line_Horizon)
	{
		SkyNormal(frontsector, v1, v2);
		DoHorizon(seg, frontsector, v1, v2);
		return;
	}

	//return;
	// [GZ] 3D middle textures are necessarily two-sided, even if they lack the explicit two-sided flag
	if (!backsector || !(seg->linedef->flags&(ML_TWOSIDED | ML_3DMIDTEX))) // one sided
	{
		// sector's sky
		SkyNormal(frontsector, v1, v2);

		if (seg->linedef->skybox == NULL)
		{
			// normal texture
			gltexture = FMaterial::ValidateTexture(seg->sidedef->GetTexture(side_t::mid), false, true);
			if (gltexture)
			{
				DoTexture(RENDERWALL_M1S, seg, (seg->linedef->flags & ML_DONTPEGBOTTOM) > 0,
					realfront->GetPlaneTexZ(sector_t::ceiling), realfront->GetPlaneTexZ(sector_t::floor),	// must come from the original!
					fch1, fch2, ffh1, ffh2, 0);
			}
		}
	}
	else // two sided
	{

		fixed_t bch1;
		fixed_t bch2;
		fixed_t bfh1;
		fixed_t bfh2;

		if (segback->floorplane.a | segback->floorplane.b)
		{
			bfh1 = segback->floorplane.ZatPoint(v1);
			bfh2 = segback->floorplane.ZatPoint(v2);
		}
		else
		{
			bfh1 = bfh2 = -segback->floorplane.d;
		}

		if (segback->ceilingplane.a | segback->ceilingplane.b)
		{
			bch1 = segback->ceilingplane.ZatPoint(v1);
			bch2 = segback->ceilingplane.ZatPoint(v2);
		}
		else
		{
			bch1 = bch2 = segback->ceilingplane.d;
		}

		SkyTop(seg, frontsector, backsector, v1, v2);
		SkyBottom(seg, frontsector, backsector, v1, v2);

		// upper texture
		if (frontsector->GetTexture(sector_t::ceiling) != skyflatnum || backsector->GetTexture(sector_t::ceiling) != skyflatnum)
		{
			fixed_t bch1a = bch1, bch2a = bch2;
			if (frontsector->GetTexture(sector_t::floor) != skyflatnum || backsector->GetTexture(sector_t::floor) != skyflatnum)
			{
				// the back sector's floor obstructs part of this wall				
				if (ffh1 > bch1 && ffh2 > bch2)
				{
					bch2a = ffh2;
					bch1a = ffh1;
				}
			}

			if (bch1a < fch1 || bch2a < fch2)
			{
				gltexture = FMaterial::ValidateTexture(seg->sidedef->GetTexture(side_t::top), false, true);
				if (gltexture)
				{
					DoTexture(RENDERWALL_TOP, seg, (seg->linedef->flags & (ML_DONTPEGTOP)) == 0,
						realfront->GetPlaneTexZ(sector_t::ceiling), realback->GetPlaneTexZ(sector_t::ceiling),
						fch1, fch2, bch1a, bch2a, 0);
				}
				else if (!(seg->sidedef->Flags & WALLF_POLYOBJ))
				{
					if ((frontsector->ceilingplane.a | frontsector->ceilingplane.b |
						backsector->ceilingplane.a | backsector->ceilingplane.b) &&
						frontsector->GetTexture(sector_t::ceiling) != skyflatnum &&
						backsector->GetTexture(sector_t::ceiling) != skyflatnum)
					{
						gltexture = FMaterial::ValidateTexture(frontsector->GetTexture(sector_t::ceiling), false, true);
						if (gltexture)
						{
							DoTexture(RENDERWALL_TOP, seg, (seg->linedef->flags & (ML_DONTPEGTOP)) == 0,
								realfront->GetPlaneTexZ(sector_t::ceiling), realback->GetPlaneTexZ(sector_t::ceiling),
								fch1, fch2, bch1a, bch2a, 0);
						}
					}
					else
					{
						// skip processing if the back is a malformed subsector
						if (seg->PartnerSeg != NULL && !(seg->PartnerSeg->Subsector->hacked & 4))
						{
							gl_drawinfo->AddUpperMissingTexture(seg->sidedef, sub, bch1a);
						}
					}
				}
			}
		}


		/* mid texture */
		bool drawfogboundary = gl_CheckFog(frontsector, backsector);
		FTexture *tex = TexMan(seg->sidedef->GetTexture(side_t::mid));
		if (tex != NULL)
		{
			if (i_compatflags & COMPATF_MASKEDMIDTEX)
			{
				tex = tex->GetRawTexture();
			}
			gltexture = FMaterial::ValidateTexture(tex, false);
		}
		else gltexture = NULL;

		if (gltexture || drawfogboundary)
		{
			DoMidTexture(seg, drawfogboundary, frontsector, backsector, realfront, realback,
				fch1, fch2, ffh1, ffh2, bch1, bch2, bfh1, bfh2);
		}

		if (backsector->e->XFloor.ffloors.Size() || frontsector->e->XFloor.ffloors.Size())
		{
			DoFFloorBlocks(seg, frontsector, backsector, fch1, fch2, ffh1, ffh2, bch1, bch2, bfh1, bfh2);
		}

		/* bottom texture */
		// the back sector's ceiling obstructs part of this wall (specially important for sky sectors)
		if (fch1<bfh1 && fch2<bfh2)
		{
			bfh1 = fch1;
			bfh2 = fch2;
		}

		if (bfh1>ffh1 || bfh2>ffh2)
		{
			gltexture = FMaterial::ValidateTexture(seg->sidedef->GetTexture(side_t::bottom), false, true);
			if (gltexture)
			{
				DoTexture(RENDERWALL_BOTTOM, seg, (seg->linedef->flags & ML_DONTPEGBOTTOM) > 0,
					realback->GetPlaneTexZ(sector_t::floor), realfront->GetPlaneTexZ(sector_t::floor),
					bfh1, bfh2, ffh1, ffh2,
					frontsector->GetTexture(sector_t::ceiling) == skyflatnum && backsector->GetTexture(sector_t::ceiling) == skyflatnum ?
					realfront->GetPlaneTexZ(sector_t::floor) - realback->GetPlaneTexZ(sector_t::ceiling) :
					realfront->GetPlaneTexZ(sector_t::floor) - realfront->GetPlaneTexZ(sector_t::ceiling));
			}
			else if (!(seg->sidedef->Flags & WALLF_POLYOBJ))
			{
				if ((frontsector->floorplane.a | frontsector->floorplane.b |
					backsector->floorplane.a | backsector->floorplane.b) &&
					frontsector->GetTexture(sector_t::floor) != skyflatnum &&
					backsector->GetTexture(sector_t::floor) != skyflatnum)
				{
					// render it anyway with the sector's floor texture. With a background sky
					// there are ugly holes otherwise and slopes are simply not precise enough
					// to mach in any case.
					gltexture = FMaterial::ValidateTexture(frontsector->GetTexture(sector_t::floor), false, true);
					if (gltexture)
					{
						DoTexture(RENDERWALL_BOTTOM, seg, (seg->linedef->flags & ML_DONTPEGBOTTOM) > 0,
							realback->GetPlaneTexZ(sector_t::floor), realfront->GetPlaneTexZ(sector_t::floor),
							bfh1, bfh2, ffh1, ffh2, realfront->GetPlaneTexZ(sector_t::floor) - realfront->GetPlaneTexZ(sector_t::ceiling));
					}
				}
				else if (backsector->GetTexture(sector_t::floor) != skyflatnum)
				{
					// skip processing if the back is a malformed subsector
					if (seg->PartnerSeg != NULL && !(seg->PartnerSeg->Subsector->hacked & 4))
					{
						gl_drawinfo->AddLowerMissingTexture(seg->sidedef, sub, bfh1);
					}
				}
			}
		}
	}
}

//==========================================================================
//
// 
//
//==========================================================================
void GLWall::ProcessLowerMiniseg(seg_t *seg, sector_t * frontsector, sector_t * backsector)
{
	if (frontsector->GetTexture(sector_t::floor) == skyflatnum) return;

	fixed_t ffh = frontsector->GetPlaneTexZ(sector_t::floor);
	fixed_t bfh = backsector->GetPlaneTexZ(sector_t::floor);
	if (bfh > ffh)
	{
		this->seg = seg;
		this->sub = NULL;

		vertex_t * v1 = seg->v1;
		vertex_t * v2 = seg->v2;
		vertexes[0] = v1;
		vertexes[1] = v2;

		glseg.x1 = FIXED2FLOAT(v1->x);
		glseg.y1 = FIXED2FLOAT(v1->y);
		glseg.x2 = FIXED2FLOAT(v2->x);
		glseg.y2 = FIXED2FLOAT(v2->y);
		glseg.fracleft = 0;
		glseg.fracright = 1;

		flags = 0;

		// can't do fake contrast without a sidedef
		lightlevel = gl_ClampLight(frontsector->lightlevel);
		rellight = 0;

		alpha = 1.0f;
		RenderStyle = STYLE_Normal;
		Colormap = frontsector->ColorMap;

		topflat = frontsector->GetTexture(sector_t::ceiling);	// for glowing textures
		bottomflat = frontsector->GetTexture(sector_t::floor);
		topplane = frontsector->ceilingplane;
		bottomplane = frontsector->floorplane;
		dynlightindex = UINT_MAX;

		zfloor[0] = zfloor[1] = FIXED2FLOAT(ffh);

		gltexture = FMaterial::ValidateTexture(frontsector->GetTexture(sector_t::floor), false, true);

		if (gltexture)
		{
			FTexCoordInfo tci;
			type = RENDERWALL_BOTTOM;
			gltexture->GetTexCoordInfo(&tci, FRACUNIT, FRACUNIT);
			SetWallCoordinates(seg, &tci, FIXED2FLOAT(bfh), bfh, bfh, ffh, ffh, 0);
			PutWall(false);
		}
	}
}