fluidsynth/doc/recent_changes.txt

/*!

\page RecentChanges Recent Changes
\section NewIn2_2_0 What's new in 2.2.0?

- #fluid_file_callbacks_t now uses <code>long long</code> as file-offset type (see #fluid_long_long_t). This is a breaking change, which allows to load SoundFonts bigger than 2GiB on Windows. This change required to bump fluidsynth's SOVERSION.
- fluid_event_any_control_change() has been removed
- various fluid_event_*() functions that received a "value" argument of type <code>short</code> now receive an <code>int</code> argument in preparation for MIDI 2.0 support
- The sequencer has received a major revisal. For you that means:
  - The sequencer's queue no longer blocks the synthesizer thread, due to being busy arranging its events internally.
  - Events that share the same tick was given a new, documented order, see fluid_sequencer_send_at().
  - The sequencer's scale can now be used for arbitrary tempo changes. Previously, the scale of the sequencer was limited to 1000. The only limitation now is >0.
- The dynamic-sample-loader has learned support to pin samples, see fluid_synth_pin_preset() and fluid_synth_unpin_preset()

\section NewIn2_1_4 What's new in 2.1.4?

- a regression introduced in 2.1.3 broke fluid_synth_start() for DLS presets

\section NewIn2_1_1 What's new in 2.1.1?

- requirements for explicit sequencer client unregistering have been relaxed: delete_fluid_sequencer() now correctly frees any registered sequencer clients (clients can still be explicitly unregistered)
- using the sequencer with the system timer as timing source has been deprecated

\section NewIn2_1_0 What's new in 2.1.0?

- <span style="color:red">refrain from using fluid_synth_set_sample_rate()</span>
- \setting{synth_sample-rate} is no real-time setting anymore, see note about fluid_synth_set_sample_rate()
- new reverb engine
- chorus is now stereophonic
- smallest allowed chorus speed is now 0.1 Hz (previously 0.29 Hz)
- the following audio drivers were added:
  - opensles
  - oboe
  - sdl2
  - waveout

\section NewIn2_0_8 What's new in 2.0.8?

- fluid_sample_set_sound_data() caused broken sound when copying sample data

\section NewIn2_0_7 What's new in 2.0.7?

- fluid_free() has been added to allow proper deallocation by programming languages other than C/C++

\section NewIn2_0_6 What's new in 2.0.6?

- the MIDI player did not emit any audio when calling fluid_player_play() after fluid_player_stop()

\section NewIn2_0_5 What's new in 2.0.5?

- fluid_synth_process() omitted audio samples when called with arbitrary sample counts that were not a multiple of fluid_synth_get_internal_bufsize()
- fluid_synth_sfunload() was not releasing sample buffers of SoundFont3 files if \setting{synth_dynamic-sample-loading} was set to FALSE

\section NewIn2_0_3 What's new in 2.0.3?

- fix incorrect behaviour of fluid_sample_set_sound_data()
- add missing getters for midi events:
  - fluid_midi_event_get_text()
  - fluid_midi_event_get_lyrics()

\section NewIn2_0_2 What's new in 2.0.2?

- fluid_synth_error() has been deprecated, use fluid_set_log_function() to interfere log messages

\section NewIn2_0_0 What's new in 2.0.0?

FluidSynths major version was bumped. The API was reworked, deprecated functions were removed.

<strong><span style="color:red">Important changes that may not result in a compilation error but may cause your app to misbehave:</span></strong>

- all public \c fluid_settings_* functions that return an integer which is not meant to be interpreted as bool consistently return either FLUID_OK or FLUID_FAILED
- fluid_settings_setstr() cannot be used to set integer (toggle) settings with "yes" or "no" values anymore. Use fluid_settings_setint() instead, for example: <br /><code>fluid_settings_setint(settings, "synth.reverb.active", 0)</code> instead of <code>fluid_settings_setstr(settings, "synth.reverb.active", "no")</code>
- <span style="text-decoration:line-through;">explicit client unregistering is required for fluid_sequencer_register_client() and fluid_sequencer_register_fluidsynth()</span> (since fluidsynth 2.1.1 not required anymore, but still recommend)
- all public functions consistently receive signed integers for soundfont ids, bank and program numbers
- use unique device names for the \setting{audio_portaudio_device} setting
- fluid_synth_process() received a new more flexible implementation, but now requires zeroed-out sample buffers

<strong>Other changes in FluidSynth 2.0.0 concerning developers:</strong>

- all public \c delete_* functions return void and are safe when called with NULL
- the shell command handler was decoupled internally, as a consequence the param list of new_fluid_server() and new_fluid_cmd_handler() was adapted
- \c fluid_settings_set* functions no longer silently register unknown settings but return an error instead
- reverb: roomsize is now limited to an upper threshold of 1.0 to avoid exponential volume increase
- rename \c fluid_mod_new() and \c fluid_mod_delete() to match naming conventions: new_fluid_mod() and delete_fluid_mod()
- rename chorus getters to match naming conventions: fluid_synth_get_chorus_speed() and fluid_synth_get_chorus_depth()
- fluid_synth_remove_sfont() returns FLUID_OK or FLUID_FAILED
- introduce a separate data type for sequencer client IDs: #fluid_seq_id_t
- fluid_get_userconf() has been implemented for Windows

<strong>New Features and API additions:</strong>

- add \setting{midi_autoconnect} a setting for automatically connecting fluidsynth to available MIDI input ports
- add \setting{synth_overflow_important} and \setting{synth_overflow_important-channels} settings to take midi channels during overflow calculation into account that are considered to be "important"
- add \setting{synth_dynamic-sample-loading} a setting for enabling on demand sample loading
- add support for polyphonic key pressure events, see fluid_event_key_pressure() and fluid_synth_key_pressure()
- add fluid_synth_add_default_mod() and fluid_synth_remove_default_mod() for manipulating default modulators
- add individual reverb setters: fluid_synth_set_reverb_roomsize(), fluid_synth_set_reverb_damp(), fluid_synth_set_reverb_width(), fluid_synth_set_reverb_level()
- add individual chorus setters: fluid_synth_set_chorus_nr(), fluid_synth_set_chorus_level(), fluid_synth_set_chorus_speed(), fluid_synth_set_chorus_depth(), fluid_synth_set_chorus_type()
- add realtime settings for \setting{synth_reverb_damp} and \setting{synth_chorus_depth} parameters
- add seek support to midi-player, see fluid_player_seek()
- expose functions to manipulate the ladspa effects unit (see ladspa.h)
- add support for text and lyrics midi events, see fluid_midi_event_set_lyrics() and fluid_midi_event_set_text()
- complete rewrite of the soundfont loader API, see sfont.h
  - support for 24 bit audio samples, see fluid_sample_set_sound_data()
  - expose new_fluid_defsfloader() to support loading soundfonts from memory, see fluid_sfloader_set_callbacks() and <a href="fluidsynth_sfload_mem_8c-example.html">fluidsynth_sfload_mem.c</a>
  - remove these structs from the public API and provide proper getter and setter functions instead:
    - struct _fluid_sfloader_t
    - struct _fluid_sample_t
    - struct _fluid_sfont_t
    - struct _fluid_preset_t
- add an additional general-purpose IIR filter, see fluid_synth_set_custom_filter()
- add a custom sinusoidal modulator mapping function, see #FLUID_MOD_SIN
- implement polymono support according to MIDI specs:
  - add basic channel support, see fluid_synth_reset_basic_channel(), fluid_synth_set_basic_channel(), fluid_synth_get_basic_channel()
  - implement MIDI modes Omni On, Omni Off, Poly, Mono, see #fluid_basic_channel_modes
  - implement portamento control, see fluid_synth_set_portamento_mode(), fluid_synth_get_portamento_mode()
  - implement legato control, see fluid_synth_set_legato_mode(), fluid_synth_get_legato_mode()
  - implement breath control, see fluid_synth_set_breath_mode(), fluid_synth_get_breath_mode()

<strong>API cleanups:</strong>
  
- the ramsfont has been removed, because it is unmaintained and believed to be unused; please get in touch with the mailing list if you still need it
- remove deprecated fluid_synth_get_channel_info() in favour of fluid_synth_get_program() and fluid_synth_get_channel_preset()
- remove deprecated fluid_settings_getstr()
- remove deprecated fluid_synth_set_midi_router(), instead supply the midi-router instance when creating a command handler with new_fluid_cmd_handler()
- remove deprecated fluid_get_hinstance() and fluid_set_hinstance() (dsound driver now uses the desktop window)
- remove deprecated fluid_synth_create_key_tuning(), use fluid_synth_activate_key_tuning(synth, bank, prog, name, pitch, FALSE) instead
- remove deprecated fluid_synth_create_octave_tuning(), use fluid_synth_activate_octave_tuning(synth, bank, prog, name, pitch, FALSE) instead
- remove deprecated fluid_synth_select_tuning(), use fluid_synth_activate_tuning(synth, chan, bank, prog, FALSE) instead
- remove deprecated fluid_synth_reset_tuning(), use fluid_synth_deactivate_tuning(synth, chan, FALSE) instead
- remove deprecated FLUID_HINT_INTEGER
- remove deprecated fluid_synth_set_gen2() as there doesn't seem to be a use case for absolute generator values
- remove deprecated "synth.parallel-render" setting
- remove obsolete "audio.[out|in]put-channels" settings
- remove unimplemented "synth.dump" setting
- remove fluid_cmd_handler_register() and fluid_cmd_handler_unregister() from public API, as they seem to be unused downstream
- remove misspelled FLUID_SEQ_PITCHWHHELSENS macro
- remove struct _fluid_mod_t from public API, use the getters and setters of mod.h instead
- remove struct _fluid_gen_t, fluid_gen_set_default_values() and enum fluid_gen_flags from public API
- remove macros fluid_sfont_get_id() and fluid_sample_refcount() from public API
- remove FLUID_NUM_MOD macro from public API
- remove the following deprecated enum values from public API:
  - GEN_LAST
  - LAST_LOG_LEVEL
  - FLUID_SEQ_LASTEVENT
  - FLUID_MIDI_ROUTER_RULE_COUNT

*/