lilium-voyager/code/renderercommon/tr_image_jpg.c

/*
===========================================================================
Copyright (C) 1999-2005 Id Software, Inc.

This file is part of Quake III Arena source code.

Quake III Arena source code is free software; you can redistribute it
and/or modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the License,
or (at your option) any later version.

Quake III Arena source code is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with Quake III Arena source code; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
===========================================================================
*/

#include <setjmp.h>

#include "tr_common.h"

/*
 * Include file for users of JPEG library.
 * You will need to have included system headers that define at least
 * the typedefs FILE and size_t before you can include jpeglib.h.
 * (stdio.h is sufficient on ANSI-conforming systems.)
 * You may also wish to include "jerror.h".
 */

#ifdef USE_INTERNAL_JPEG
#  define JPEG_INTERNALS
#endif

#include <jpeglib.h>

#ifndef USE_INTERNAL_JPEG
#  if JPEG_LIB_VERSION < 80 && !defined(MEM_SRCDST_SUPPORTED)
#    error Need system libjpeg >= 80 or jpeg_mem_ support
#  endif
#endif

/* Catching errors, as done in libjpeg's example.c */
typedef struct q_jpeg_error_mgr_s
{
  struct jpeg_error_mgr pub;  /* "public" fields */

  jmp_buf setjmp_buffer;  /* for return to caller */
} q_jpeg_error_mgr_t;

static void R_JPGErrorExit(j_common_ptr cinfo)
{
  char buffer[JMSG_LENGTH_MAX];

  /* cinfo->err really points to a q_jpeg_error_mgr_s struct, so coerce pointer */
  q_jpeg_error_mgr_t *jerr = (q_jpeg_error_mgr_t *)cinfo->err;
  
  (*cinfo->err->format_message) (cinfo, buffer);

  ri.Printf(PRINT_ALL, "Error: %s", buffer);

  /* Return control to the setjmp point */
  longjmp(jerr->setjmp_buffer, 1);
}

static void R_JPGOutputMessage(j_common_ptr cinfo)
{
  char buffer[JMSG_LENGTH_MAX];
  
  /* Create the message */
  (*cinfo->err->format_message) (cinfo, buffer);
  
  /* Send it to stderr, adding a newline */
  ri.Printf(PRINT_ALL, "%s\n", buffer);
}

void R_LoadJPG(const char *filename, unsigned char **pic, int *width, int *height)
{
  /* This struct contains the JPEG decompression parameters and pointers to
   * working space (which is allocated as needed by the JPEG library).
   */
  struct jpeg_decompress_struct cinfo = {NULL};
  /* We use our private extension JPEG error handler.
   * Note that this struct must live as long as the main JPEG parameter
   * struct, to avoid dangling-pointer problems.
   */
  /* This struct represents a JPEG error handler.  It is declared separately
   * because applications often want to supply a specialized error handler
   * (see the second half of this file for an example).  But here we just
   * take the easy way out and use the standard error handler, which will
   * print a message on stderr and call exit() if compression fails.
   * Note that this struct must live as long as the main JPEG parameter
   * struct, to avoid dangling-pointer problems.
   */
  q_jpeg_error_mgr_t jerr;
  /* More stuff */
  JSAMPARRAY buffer;		/* Output row buffer */
  unsigned int row_stride;	/* physical row width in output buffer */
  unsigned int pixelcount, memcount;
  unsigned int sindex, dindex;
  byte *out;
  int len;
	union {
		byte *b;
		void *v;
	} fbuffer;
  byte  *buf;

  /* In this example we want to open the input file before doing anything else,
   * so that the setjmp() error recovery below can assume the file is open.
   * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that
   * requires it in order to read binary files.
   */

  len = ri.FS_ReadFile ( ( char * ) filename, &fbuffer.v);
  if (!fbuffer.b || len < 0) {
	return;
  }

  /* Step 1: allocate and initialize JPEG decompression object */

  /* We have to set up the error handler first, in case the initialization
   * step fails.  (Unlikely, but it could happen if you are out of memory.)
   * This routine fills in the contents of struct jerr, and returns jerr's
   * address which we place into the link field in cinfo.
   */
  cinfo.err = jpeg_std_error(&jerr.pub);
  cinfo.err->error_exit = R_JPGErrorExit;
  cinfo.err->output_message = R_JPGOutputMessage;

  /* Establish the setjmp return context for R_JPGErrorExit to use. */
  if (setjmp(jerr.setjmp_buffer))
  {
    /* If we get here, the JPEG code has signaled an error.
     * We need to clean up the JPEG object, close the input file, and return.
     */
    jpeg_destroy_decompress(&cinfo);
    ri.FS_FreeFile(fbuffer.v);

    /* Append the filename to the error for easier debugging */
    ri.Printf(PRINT_ALL, ", loading file %s\n", filename);
    return;
  }

  /* Now we can initialize the JPEG decompression object. */
  jpeg_create_decompress(&cinfo);

  /* Step 2: specify data source (eg, a file) */

  jpeg_mem_src(&cinfo, fbuffer.b, len);

  /* Step 3: read file parameters with jpeg_read_header() */

  (void) jpeg_read_header(&cinfo, TRUE);
  /* We can ignore the return value from jpeg_read_header since
   *   (a) suspension is not possible with the stdio data source, and
   *   (b) we passed TRUE to reject a tables-only JPEG file as an error.
   * See libjpeg.doc for more info.
   */

  /* Step 4: set parameters for decompression */

  /*
   * Make sure it always converts images to RGB color space. This will
   * automatically convert 8-bit greyscale images to RGB as well.
   */
  cinfo.out_color_space = JCS_RGB;

  /* Step 5: Start decompressor */

  (void) jpeg_start_decompress(&cinfo);
  /* We can ignore the return value since suspension is not possible
   * with the stdio data source.
   */

  /* We may need to do some setup of our own at this point before reading
   * the data.  After jpeg_start_decompress() we have the correct scaled
   * output image dimensions available, as well as the output colormap
   * if we asked for color quantization.
   * In this example, we need to make an output work buffer of the right size.
   */ 
  /* JSAMPLEs per row in output buffer */

  pixelcount = cinfo.output_width * cinfo.output_height;

  if(!cinfo.output_width || !cinfo.output_height
      || ((pixelcount * 4) / cinfo.output_width) / 4 != cinfo.output_height
      || pixelcount > 0x1FFFFFFF || cinfo.output_components != 3
    )
  {
    // Free the memory to make sure we don't leak memory
    ri.FS_FreeFile (fbuffer.v);
    jpeg_destroy_decompress(&cinfo);
  
    ri.Error(ERR_DROP, "LoadJPG: %s has an invalid image format: %dx%d*4=%d, components: %d", filename,
		    cinfo.output_width, cinfo.output_height, pixelcount * 4, cinfo.output_components);
  }

  memcount = pixelcount * 4;
  row_stride = cinfo.output_width * cinfo.output_components;

  out = ri.Malloc(memcount);

  *width = cinfo.output_width;
  *height = cinfo.output_height;

  /* Step 6: while (scan lines remain to be read) */
  /*           jpeg_read_scanlines(...); */

  /* Here we use the library's state variable cinfo.output_scanline as the
   * loop counter, so that we don't have to keep track ourselves.
   */
  while (cinfo.output_scanline < cinfo.output_height) {
    /* jpeg_read_scanlines expects an array of pointers to scanlines.
     * Here the array is only one element long, but you could ask for
     * more than one scanline at a time if that's more convenient.
     */
	buf = ((out+(row_stride*cinfo.output_scanline)));
	buffer = &buf;
    (void) jpeg_read_scanlines(&cinfo, buffer, 1);
  }
  
  buf = out;

  // Expand from RGB to RGBA
  sindex = pixelcount * cinfo.output_components;
  dindex = memcount;

  do
  {	
    buf[--dindex] = 255;
    buf[--dindex] = buf[--sindex];
    buf[--dindex] = buf[--sindex];
    buf[--dindex] = buf[--sindex];
  } while(sindex);

  *pic = out;

  /* Step 7: Finish decompression */

  jpeg_finish_decompress(&cinfo);
  /* We can ignore the return value since suspension is not possible
   * with the stdio data source.
   */

  /* Step 8: Release JPEG decompression object */

  /* This is an important step since it will release a good deal of memory. */
  jpeg_destroy_decompress(&cinfo);

  /* After finish_decompress, we can close the input file.
   * Here we postpone it until after no more JPEG errors are possible,
   * so as to simplify the setjmp error logic above.  (Actually, I don't
   * think that jpeg_destroy can do an error exit, but why assume anything...)
   */
  ri.FS_FreeFile (fbuffer.v);

  /* At this point you may want to check to see whether any corrupt-data
   * warnings occurred (test whether jerr.pub.num_warnings is nonzero).
   */

  /* And we're done! */
}


/* Expanded data destination object for stdio output */

typedef struct {
  struct jpeg_destination_mgr pub; /* public fields */

  byte* outfile;		/* target stream */
  int	size;
} my_destination_mgr;

typedef my_destination_mgr * my_dest_ptr;


/*
 * Initialize destination --- called by jpeg_start_compress
 * before any data is actually written.
 */

static void
init_destination (j_compress_ptr cinfo)
{
  my_dest_ptr dest = (my_dest_ptr) cinfo->dest;

  dest->pub.next_output_byte = dest->outfile;
  dest->pub.free_in_buffer = dest->size;
}


/*
 * Empty the output buffer --- called whenever buffer fills up.
 *
 * In typical applications, this should write the entire output buffer
 * (ignoring the current state of next_output_byte & free_in_buffer),
 * reset the pointer & count to the start of the buffer, and return TRUE
 * indicating that the buffer has been dumped.
 *
 * In applications that need to be able to suspend compression due to output
 * overrun, a FALSE return indicates that the buffer cannot be emptied now.
 * In this situation, the compressor will return to its caller (possibly with
 * an indication that it has not accepted all the supplied scanlines).  The
 * application should resume compression after it has made more room in the
 * output buffer.  Note that there are substantial restrictions on the use of
 * suspension --- see the documentation.
 *
 * When suspending, the compressor will back up to a convenient restart point
 * (typically the start of the current MCU). next_output_byte & free_in_buffer
 * indicate where the restart point will be if the current call returns FALSE.
 * Data beyond this point will be regenerated after resumption, so do not
 * write it out when emptying the buffer externally.
 */

static boolean
empty_output_buffer (j_compress_ptr cinfo)
{
  my_dest_ptr dest = (my_dest_ptr) cinfo->dest;
  
  jpeg_destroy_compress(cinfo);
  
  // Make crash fatal or we would probably leak memory.
  ri.Error(ERR_FATAL, "Output buffer for encoded JPEG image has insufficient size of %d bytes",
           dest->size);

  return FALSE;
}

/*
 * Terminate destination --- called by jpeg_finish_compress
 * after all data has been written.  Usually needs to flush buffer.
 *
 * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding
 * application must deal with any cleanup that should happen even
 * for error exit.
 */

static void term_destination(j_compress_ptr cinfo)
{
}


/*
 * Prepare for output to a stdio stream.
 * The caller must have already opened the stream, and is responsible
 * for closing it after finishing compression.
 */

static void
jpegDest (j_compress_ptr cinfo, byte* outfile, int size)
{
  my_dest_ptr dest;

  /* The destination object is made permanent so that multiple JPEG images
   * can be written to the same file without re-executing jpeg_stdio_dest.
   * This makes it dangerous to use this manager and a different destination
   * manager serially with the same JPEG object, because their private object
   * sizes may be different.  Caveat programmer.
   */
  if (cinfo->dest == NULL) {	/* first time for this JPEG object? */
    cinfo->dest = (struct jpeg_destination_mgr *)
      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
				  sizeof(my_destination_mgr));
  }

  dest = (my_dest_ptr) cinfo->dest;
  dest->pub.init_destination = init_destination;
  dest->pub.empty_output_buffer = empty_output_buffer;
  dest->pub.term_destination = term_destination;
  dest->outfile = outfile;
  dest->size = size;
}

/*
=================
SaveJPGToBuffer

Encodes JPEG from image in image_buffer and writes to buffer.
Expects RGB input data
=================
*/
size_t RE_SaveJPGToBuffer(byte *buffer, size_t bufSize, int quality,
    int image_width, int image_height, byte *image_buffer, int padding)
{
  struct jpeg_compress_struct cinfo;
  q_jpeg_error_mgr_t jerr;
  JSAMPROW row_pointer[1];	/* pointer to JSAMPLE row[s] */
  my_dest_ptr dest;
  int row_stride;		/* physical row width in image buffer */
  size_t outcount;

  /* Step 1: allocate and initialize JPEG compression object */
  cinfo.err = jpeg_std_error(&jerr.pub);
  cinfo.err->error_exit = R_JPGErrorExit;
  cinfo.err->output_message = R_JPGOutputMessage;

  /* Establish the setjmp return context for R_JPGErrorExit to use. */
  if (setjmp(jerr.setjmp_buffer))
  {
    /* If we get here, the JPEG code has signaled an error.
     * We need to clean up the JPEG object and return.
     */
    jpeg_destroy_compress(&cinfo);

    ri.Printf(PRINT_ALL, "\n");
    return 0;
  }

  /* Now we can initialize the JPEG compression object. */
  jpeg_create_compress(&cinfo);

  /* Step 2: specify data destination (eg, a file) */
  /* Note: steps 2 and 3 can be done in either order. */
  jpegDest(&cinfo, buffer, bufSize);

  /* Step 3: set parameters for compression */
  cinfo.image_width = image_width; 	/* image width and height, in pixels */
  cinfo.image_height = image_height;
  cinfo.input_components = 3;		/* # of color components per pixel */
  cinfo.in_color_space = JCS_RGB; 	/* colorspace of input image */

  jpeg_set_defaults(&cinfo);
  jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */);
  /* If quality is set high, disable chroma subsampling */
  if (quality >= 85) {
    cinfo.comp_info[0].h_samp_factor = 1;
    cinfo.comp_info[0].v_samp_factor = 1;
  }

  /* Step 4: Start compressor */
  jpeg_start_compress(&cinfo, TRUE);

  /* Step 5: while (scan lines remain to be written) */
  /*           jpeg_write_scanlines(...); */
  row_stride = image_width * cinfo.input_components + padding; /* JSAMPLEs per row in image_buffer */
  
  while (cinfo.next_scanline < cinfo.image_height) {
    /* jpeg_write_scanlines expects an array of pointers to scanlines.
     * Here the array is only one element long, but you could pass
     * more than one scanline at a time if that's more convenient.
     */
    row_pointer[0] = &image_buffer[((cinfo.image_height-1)*row_stride)-cinfo.next_scanline * row_stride];
    (void) jpeg_write_scanlines(&cinfo, row_pointer, 1);
  }

  /* Step 6: Finish compression */
  jpeg_finish_compress(&cinfo);
  
  dest = (my_dest_ptr) cinfo.dest;
  outcount = dest->size - dest->pub.free_in_buffer;
 
  /* Step 7: release JPEG compression object */
  jpeg_destroy_compress(&cinfo);

  /* And we're done! */
  return outcount;
}

void RE_SaveJPG(char * filename, int quality, int image_width, int image_height, byte *image_buffer, int padding)
{
  byte *out;
  size_t bufSize;

  bufSize = image_width * image_height * 3;
  out = ri.Hunk_AllocateTempMemory(bufSize);

  bufSize = RE_SaveJPGToBuffer(out, bufSize, quality, image_width, image_height, image_buffer, padding);
  ri.FS_WriteFile(filename, out, bufSize);

  ri.Hunk_FreeTempMemory(out);
}