lilium-voyager/code/qcommon/net_chan.c

809 lines
19 KiB
C
Raw Normal View History

2005-08-26 17:39:27 +00:00
/*
===========================================================================
Copyright (C) 1999-2005 Id Software, Inc.
This file is part of Quake III Arena source code.
Quake III Arena source code is free software; you can redistribute it
and/or modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the License,
or (at your option) any later version.
Quake III Arena source code is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with Quake III Arena source code; if not, write to the Free Software
2005-08-26 17:39:27 +00:00
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
===========================================================================
*/
#include "q_shared.h"
2005-08-26 17:39:27 +00:00
#include "qcommon.h"
/*
packet header
-------------
4 outgoing sequence. high bit will be set if this is a fragmented message
[2 qport (only for client to server)]
[2 fragment start byte]
[2 fragment length. if < FRAGMENT_SIZE, this is the last fragment]
if the sequence number is -1, the packet should be handled as an out-of-band
message instead of as part of a netcon.
All fragments will have the same sequence numbers.
The qport field is a workaround for bad address translating routers that
sometimes remap the client's source port on a packet during gameplay.
If the base part of the net address matches and the qport matches, then the
channel matches even if the IP port differs. The IP port should be updated
to the new value before sending out any replies.
*/
#define MAX_PACKETLEN 1400 // max size of a network packet
#define FRAGMENT_SIZE (MAX_PACKETLEN - 100)
#define PACKET_HEADER 10 // two ints and a short
#define FRAGMENT_BIT (1U<<31)
2005-08-26 17:39:27 +00:00
cvar_t *showpackets;
cvar_t *showdrop;
cvar_t *qport;
static char *netsrcString[2] = {
"client",
"server"
};
/*
===============
Netchan_Init
===============
*/
void Netchan_Init( int port ) {
port &= 0xffff;
showpackets = Cvar_Get ("showpackets", "0", CVAR_TEMP );
showdrop = Cvar_Get ("showdrop", "0", CVAR_TEMP );
qport = Cvar_Get ("net_qport", va("%i", port), CVAR_INIT );
}
/*
==============
Netchan_Setup
called to open a channel to a remote system
==============
*/
void Netchan_Setup(netsrc_t sock, netchan_t *chan, netadr_t adr, int qport, int challenge, qboolean compat)
{
2005-08-26 17:39:27 +00:00
Com_Memset (chan, 0, sizeof(*chan));
chan->sock = sock;
chan->remoteAddress = adr;
chan->qport = qport;
chan->incomingSequence = 0;
chan->outgoingSequence = 1;
chan->challenge = challenge;
#ifdef LEGACY_PROTOCOL
chan->compat = compat;
#endif
2005-08-26 17:39:27 +00:00
}
#ifdef ELITEFORCE
/*
==============
Netchan_ScramblePacket
A probably futile attempt to make proxy hacking somewhat
more difficult.
==============
*/
#define SCRAMBLE_START 6
static void Netchan_ScramblePacket( msg_t *buf ) {
unsigned seed;
int i, j, c, mask, temp;
int seq[MAX_PACKETLEN];
seed = ( LittleLong( *(unsigned *)buf->data ) * 3 ) ^ ( buf->cursize * 123 ) ^ 0x87243987;
c = buf->cursize;
if ( c <= SCRAMBLE_START ) {
return;
}
if ( c > MAX_PACKETLEN ) {
Com_Error( ERR_DROP, "MAX_PACKETLEN" );
}
// generate a sequence of "random" numbers
for (i = 0 ; i < c ; i++) {
seed = (69069 * seed + 1);
seq[i] = seed;
}
// byte xor the data after the header
for (i = SCRAMBLE_START ; i < c ; i++) {
buf->data[i] ^= seq[i];
}
// transpose each character
for ( mask = 1 ; mask < c-SCRAMBLE_START ; mask = ( mask << 1 ) + 1 ) {
}
mask >>= 1;
for (i = SCRAMBLE_START ; i < c ; i++) {
j = SCRAMBLE_START + ( seq[i] & mask );
temp = buf->data[j];
buf->data[j] = buf->data[i];
buf->data[i] = temp;
}
// byte xor the data after the header
// for (i = SCRAMBLE_START ; i < c ; i++) {
// buf->data[i] ^= seq[i];
// }
}
static void Netchan_UnScramblePacket( msg_t *buf ) {
unsigned seed;
int i, j, c, mask, temp;
int seq[MAX_PACKETLEN];
seed = ( LittleLong( *(unsigned *)buf->data ) * 3 ) ^ ( buf->cursize * 123 ) ^ 0x87243987;
c = buf->cursize;
if ( c <= SCRAMBLE_START ) {
return;
}
if ( c > MAX_PACKETLEN ) {
Com_Error( ERR_DROP, "MAX_PACKETLEN" );
}
// generate a sequence of "random" numbers
for (i = 0 ; i < c ; i++) {
seed = (69069 * seed + 1);
seq[i] = seed;
}
// byte xor the data after the header
// for (i = SCRAMBLE_START ; i < c ; i++) {
// buf->data[i] ^= seq[i];
// }
// transpose each character in reverse order
for ( mask = 1 ; mask < c-SCRAMBLE_START ; mask = ( mask << 1 ) + 1 ) {
}
mask >>= 1;
for (i = c-1 ; i >= SCRAMBLE_START ; i--) {
j = SCRAMBLE_START + ( seq[i] & mask );
temp = buf->data[j];
buf->data[j] = buf->data[i];
buf->data[i] = temp;
}
// byte xor the data after the header
for (i = SCRAMBLE_START ; i < c ; i++) {
buf->data[i] ^= seq[i];
}
}
#endif
2005-08-26 17:39:27 +00:00
/*
=================
Netchan_TransmitNextFragment
Send one fragment of the current message
=================
*/
void Netchan_TransmitNextFragment( netchan_t *chan ) {
msg_t send;
byte send_buf[MAX_PACKETLEN];
int fragmentLength;
int outgoingSequence;
2005-08-26 17:39:27 +00:00
// write the packet header
MSG_InitOOB (&send, send_buf, sizeof(send_buf)); // <-- only do the oob here
outgoingSequence = chan->outgoingSequence | FRAGMENT_BIT;
MSG_WriteLong(&send, outgoingSequence);
2005-08-26 17:39:27 +00:00
// send the qport if we are a client
if ( chan->sock == NS_CLIENT ) {
MSG_WriteShort( &send, qport->integer );
}
#ifdef LEGACY_PROTOCOL
if(!chan->compat)
#endif
MSG_WriteLong(&send, NETCHAN_GENCHECKSUM(chan->challenge, chan->outgoingSequence));
2005-08-26 17:39:27 +00:00
// copy the reliable message to the packet first
fragmentLength = FRAGMENT_SIZE;
if ( chan->unsentFragmentStart + fragmentLength > chan->unsentLength ) {
fragmentLength = chan->unsentLength - chan->unsentFragmentStart;
}
MSG_WriteShort( &send, chan->unsentFragmentStart );
MSG_WriteShort( &send, fragmentLength );
MSG_WriteData( &send, chan->unsentBuffer + chan->unsentFragmentStart, fragmentLength );
#ifdef ELITEFORCE
if(chan->compat)
{
// the original eliteforce uses the old scrambling routines only slightly modified.
Netchan_ScramblePacket( &send );
}
#endif
2005-08-26 17:39:27 +00:00
// send the datagram
NET_SendPacket(chan->sock, send.cursize, send.data, chan->remoteAddress);
// Store send time and size of this packet for rate control
chan->lastSentTime = Sys_Milliseconds();
chan->lastSentSize = send.cursize;
2005-08-26 17:39:27 +00:00
if ( showpackets->integer ) {
Com_Printf ("%s send %4i : s=%i fragment=%i,%i\n"
, netsrcString[ chan->sock ]
, send.cursize
, chan->outgoingSequence
, chan->unsentFragmentStart, fragmentLength);
}
chan->unsentFragmentStart += fragmentLength;
// this exit condition is a little tricky, because a packet
// that is exactly the fragment length still needs to send
// a second packet of zero length so that the other side
// can tell there aren't more to follow
if ( chan->unsentFragmentStart == chan->unsentLength && fragmentLength != FRAGMENT_SIZE ) {
chan->outgoingSequence++;
chan->unsentFragments = qfalse;
}
}
/*
===============
Netchan_Transmit
Sends a message to a connection, fragmenting if necessary
A 0 length will still generate a packet.
================
*/
void Netchan_Transmit( netchan_t *chan, int length, const byte *data ) {
msg_t send;
byte send_buf[MAX_PACKETLEN];
if ( length > MAX_MSGLEN ) {
Com_Error( ERR_DROP, "Netchan_Transmit: length = %i", length );
}
chan->unsentFragmentStart = 0;
// fragment large reliable messages
if ( length >= FRAGMENT_SIZE ) {
chan->unsentFragments = qtrue;
chan->unsentLength = length;
Com_Memcpy( chan->unsentBuffer, data, length );
// only send the first fragment now
Netchan_TransmitNextFragment( chan );
return;
}
// write the packet header
MSG_InitOOB (&send, send_buf, sizeof(send_buf));
MSG_WriteLong( &send, chan->outgoingSequence );
// send the qport if we are a client
if(chan->sock == NS_CLIENT)
MSG_WriteShort(&send, qport->integer);
#ifdef LEGACY_PROTOCOL
if(!chan->compat)
#endif
MSG_WriteLong(&send, NETCHAN_GENCHECKSUM(chan->challenge, chan->outgoingSequence));
chan->outgoingSequence++;
2005-08-26 17:39:27 +00:00
MSG_WriteData( &send, data, length );
#ifdef ELITEFORCE
if(chan->compat)
{
// the original eliteforce uses the old scrambling routines only slightly modified.
Netchan_ScramblePacket( &send );
}
#endif
2005-08-26 17:39:27 +00:00
// send the datagram
NET_SendPacket( chan->sock, send.cursize, send.data, chan->remoteAddress );
// Store send time and size of this packet for rate control
chan->lastSentTime = Sys_Milliseconds();
chan->lastSentSize = send.cursize;
2005-08-26 17:39:27 +00:00
if ( showpackets->integer ) {
Com_Printf( "%s send %4i : s=%i ack=%i\n"
, netsrcString[ chan->sock ]
, send.cursize
, chan->outgoingSequence - 1
, chan->incomingSequence );
}
}
/*
=================
Netchan_Process
Returns qfalse if the message should not be processed due to being
out of order or a fragment.
Msg must be large enough to hold MAX_MSGLEN, because if this is the
final fragment of a multi-part message, the entire thing will be
copied out.
=================
*/
qboolean Netchan_Process( netchan_t *chan, msg_t *msg ) {
int sequence;
int fragmentStart, fragmentLength;
qboolean fragmented;
// XOR unscramble all data in the packet after the header
#ifdef ELITEFORCE
if(chan->compat)
Netchan_UnScramblePacket( msg );
#endif
2005-08-26 17:39:27 +00:00
// get sequence numbers
MSG_BeginReadingOOB( msg );
sequence = MSG_ReadLong( msg );
// check for fragment information
if ( sequence & FRAGMENT_BIT ) {
sequence &= ~FRAGMENT_BIT;
fragmented = qtrue;
} else {
fragmented = qfalse;
}
// read the qport if we are a server
if ( chan->sock == NS_SERVER ) {
MSG_ReadShort( msg );
2005-08-26 17:39:27 +00:00
}
#ifdef LEGACY_PROTOCOL
if(!chan->compat)
#endif
{
int checksum = MSG_ReadLong(msg);
// UDP spoofing protection
if(NETCHAN_GENCHECKSUM(chan->challenge, sequence) != checksum)
return qfalse;
}
2005-08-26 17:39:27 +00:00
// read the fragment information
if ( fragmented ) {
fragmentStart = MSG_ReadShort( msg );
fragmentLength = MSG_ReadShort( msg );
} else {
fragmentStart = 0; // stop warning message
fragmentLength = 0;
}
if ( showpackets->integer ) {
if ( fragmented ) {
Com_Printf( "%s recv %4i : s=%i fragment=%i,%i\n"
, netsrcString[ chan->sock ]
, msg->cursize
, sequence
, fragmentStart, fragmentLength );
} else {
Com_Printf( "%s recv %4i : s=%i\n"
, netsrcString[ chan->sock ]
, msg->cursize
, sequence );
}
}
//
// discard out of order or duplicated packets
//
if ( sequence <= chan->incomingSequence ) {
if ( showdrop->integer || showpackets->integer ) {
Com_Printf( "%s:Out of order packet %i at %i\n"
, NET_AdrToString( chan->remoteAddress )
, sequence
, chan->incomingSequence );
}
return qfalse;
}
//
// dropped packets don't keep the message from being used
//
chan->dropped = sequence - (chan->incomingSequence+1);
if ( chan->dropped > 0 ) {
if ( showdrop->integer || showpackets->integer ) {
Com_Printf( "%s:Dropped %i packets at %i\n"
, NET_AdrToString( chan->remoteAddress )
, chan->dropped
, sequence );
}
}
//
// if this is the final framgent of a reliable message,
// bump incoming_reliable_sequence
//
if ( fragmented ) {
// TTimo
// make sure we add the fragments in correct order
// either a packet was dropped, or we received this one too soon
// we don't reconstruct the fragments. we will wait till this fragment gets to us again
// (NOTE: we could probably try to rebuild by out of order chunks if needed)
if ( sequence != chan->fragmentSequence ) {
chan->fragmentSequence = sequence;
chan->fragmentLength = 0;
}
// if we missed a fragment, dump the message
if ( fragmentStart != chan->fragmentLength ) {
if ( showdrop->integer || showpackets->integer ) {
Com_Printf( "%s:Dropped a message fragment\n"
, NET_AdrToString( chan->remoteAddress ));
2005-08-26 17:39:27 +00:00
}
// we can still keep the part that we have so far,
// so we don't need to clear chan->fragmentLength
return qfalse;
}
// copy the fragment to the fragment buffer
if ( fragmentLength < 0 || msg->readcount + fragmentLength > msg->cursize ||
chan->fragmentLength + fragmentLength > sizeof( chan->fragmentBuffer ) ) {
if ( showdrop->integer || showpackets->integer ) {
Com_Printf ("%s:illegal fragment length\n"
, NET_AdrToString (chan->remoteAddress ) );
}
return qfalse;
}
Com_Memcpy( chan->fragmentBuffer + chan->fragmentLength,
msg->data + msg->readcount, fragmentLength );
chan->fragmentLength += fragmentLength;
// if this wasn't the last fragment, don't process anything
if ( fragmentLength == FRAGMENT_SIZE ) {
return qfalse;
}
if ( chan->fragmentLength > msg->maxsize ) {
Com_Printf( "%s:fragmentLength %i > msg->maxsize\n"
, NET_AdrToString (chan->remoteAddress ),
chan->fragmentLength );
return qfalse;
}
// copy the full message over the partial fragment
// make sure the sequence number is still there
*(int *)msg->data = LittleLong( sequence );
Com_Memcpy( msg->data + 4, chan->fragmentBuffer, chan->fragmentLength );
msg->cursize = chan->fragmentLength + 4;
chan->fragmentLength = 0;
msg->readcount = 4; // past the sequence number
msg->bit = 32; // past the sequence number
// TTimo
// clients were not acking fragmented messages
#ifdef ELITEFORCE
if(!chan->compat)
#endif
chan->incomingSequence = sequence;
2005-08-26 17:39:27 +00:00
return qtrue;
}
//
// the message can now be read from the current message pointer
//
chan->incomingSequence = sequence;
return qtrue;
}
//==============================================================================
/*
=============================================================================
LOOPBACK BUFFERS FOR LOCAL PLAYER
=============================================================================
*/
// there needs to be enough loopback messages to hold a complete
// gamestate of maximum size
#define MAX_LOOPBACK 16
typedef struct {
byte data[MAX_PACKETLEN];
int datalen;
} loopmsg_t;
typedef struct {
loopmsg_t msgs[MAX_LOOPBACK];
int get, send;
} loopback_t;
loopback_t loopbacks[2];
qboolean NET_GetLoopPacket (netsrc_t sock, netadr_t *net_from, msg_t *net_message)
{
int i;
loopback_t *loop;
loop = &loopbacks[sock];
if (loop->send - loop->get > MAX_LOOPBACK)
loop->get = loop->send - MAX_LOOPBACK;
if (loop->get >= loop->send)
return qfalse;
i = loop->get & (MAX_LOOPBACK-1);
loop->get++;
Com_Memcpy (net_message->data, loop->msgs[i].data, loop->msgs[i].datalen);
net_message->cursize = loop->msgs[i].datalen;
Com_Memset (net_from, 0, sizeof(*net_from));
net_from->type = NA_LOOPBACK;
return qtrue;
}
void NET_SendLoopPacket (netsrc_t sock, int length, const void *data, netadr_t to)
{
int i;
loopback_t *loop;
loop = &loopbacks[sock^1];
i = loop->send & (MAX_LOOPBACK-1);
loop->send++;
Com_Memcpy (loop->msgs[i].data, data, length);
loop->msgs[i].datalen = length;
}
//=============================================================================
typedef struct packetQueue_s {
struct packetQueue_s *next;
int length;
byte *data;
netadr_t to;
int release;
} packetQueue_t;
packetQueue_t *packetQueue = NULL;
static void NET_QueuePacket( int length, const void *data, netadr_t to,
int offset )
{
packetQueue_t *new, *next = packetQueue;
if(offset > 999)
offset = 999;
new = S_Malloc(sizeof(packetQueue_t));
new->data = S_Malloc(length);
Com_Memcpy(new->data, data, length);
new->length = length;
new->to = to;
new->release = Sys_Milliseconds() + (int)((float)offset / com_timescale->value);
new->next = NULL;
if(!packetQueue) {
packetQueue = new;
return;
}
while(next) {
if(!next->next) {
next->next = new;
return;
}
next = next->next;
}
}
void NET_FlushPacketQueue(void)
{
packetQueue_t *last;
int now;
while(packetQueue) {
now = Sys_Milliseconds();
if(packetQueue->release >= now)
break;
Sys_SendPacket(packetQueue->length, packetQueue->data,
packetQueue->to);
last = packetQueue;
packetQueue = packetQueue->next;
Z_Free(last->data);
Z_Free(last);
}
}
2005-08-26 17:39:27 +00:00
void NET_SendPacket( netsrc_t sock, int length, const void *data, netadr_t to ) {
// sequenced packets are shown in netchan, so just show oob
if ( showpackets->integer && *(int *)data == -1 ) {
Com_Printf ("send packet %4i\n", length);
}
if ( to.type == NA_LOOPBACK ) {
NET_SendLoopPacket (sock, length, data, to);
return;
}
if ( to.type == NA_BOT ) {
return;
}
if ( to.type == NA_BAD ) {
return;
}
if ( sock == NS_CLIENT && cl_packetdelay->integer > 0 ) {
NET_QueuePacket( length, data, to, cl_packetdelay->integer );
}
else if ( sock == NS_SERVER && sv_packetdelay->integer > 0 ) {
NET_QueuePacket( length, data, to, sv_packetdelay->integer );
}
else {
Sys_SendPacket( length, data, to );
}
2005-08-26 17:39:27 +00:00
}
/*
===============
NET_OutOfBandPrint
Sends a text message in an out-of-band datagram
================
*/
void QDECL NET_OutOfBandPrint( netsrc_t sock, netadr_t adr, const char *format, ... ) {
va_list argptr;
char string[MAX_MSGLEN];
// set the header
string[0] = -1;
string[1] = -1;
string[2] = -1;
string[3] = -1;
va_start( argptr, format );
Q_vsnprintf( string+4, sizeof(string)-4, format, argptr );
2005-08-26 17:39:27 +00:00
va_end( argptr );
// send the datagram
NET_SendPacket( sock, strlen( string ), string, adr );
}
/*
===============
NET_OutOfBandPrint
Sends a data message in an out-of-band datagram (only used for "connect")
================
*/
void QDECL NET_OutOfBandData( netsrc_t sock, netadr_t adr, byte *format, int len ) {
byte string[MAX_MSGLEN*2];
int i;
msg_t mbuf;
// set the header
string[0] = 0xff;
string[1] = 0xff;
string[2] = 0xff;
string[3] = 0xff;
for(i=0;i<len;i++) {
string[i+4] = format[i];
}
mbuf.data = string;
mbuf.cursize = len+4;
Huff_Compress( &mbuf, 12);
// send the datagram
NET_SendPacket( sock, mbuf.cursize, mbuf.data, adr );
}
/*
=============
NET_StringToAdr
Traps "localhost" for loopback, passes everything else to system
return 0 on address not found, 1 on address found with port, 2 on address found without port.
2005-08-26 17:39:27 +00:00
=============
*/
int NET_StringToAdr( const char *s, netadr_t *a, netadrtype_t family )
{
char base[MAX_STRING_CHARS], *search;
char *port = NULL;
2005-08-26 17:39:27 +00:00
if (!strcmp (s, "localhost")) {
Com_Memset (a, 0, sizeof(*a));
a->type = NA_LOOPBACK;
// as NA_LOOPBACK doesn't require ports report port was given.
return 1;
2005-08-26 17:39:27 +00:00
}
Q_strncpyz( base, s, sizeof( base ) );
if(*base == '[' || Q_CountChar(base, ':') > 1)
{
// This is an ipv6 address, handle it specially.
search = strchr(base, ']');
if(search)
{
*search = '\0';
search++;
if(*search == ':')
port = search + 1;
}
if(*base == '[')
search = base + 1;
else
search = base;
}
else
{
// look for a port number
port = strchr( base, ':' );
if ( port ) {
*port = '\0';
port++;
}
search = base;
2005-08-26 17:39:27 +00:00
}
if(!Sys_StringToAdr(search, a, family))
{
2005-08-26 17:39:27 +00:00
a->type = NA_BAD;
return 0;
2005-08-26 17:39:27 +00:00
}
if(port)
{
a->port = BigShort((short) atoi(port));
return 1;
}
else
{
a->port = BigShort(PORT_SERVER);
return 2;
2005-08-26 17:39:27 +00:00
}
}