ioef/common/bspfile.c

/*
===========================================================================
Copyright (C) 1999-2005 Id Software, Inc.

This file is part of Quake III Arena source code.

Quake III Arena source code is free software; you can redistribute it
and/or modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the License,
or (at your option) any later version.

Quake III Arena source code is distributed in the hope that it will be
useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with Foobar; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
===========================================================================
*/

#include "cmdlib.h"
#include "mathlib.h"
#include "bspfile.h"
#include "scriplib.h"

void GetLeafNums (void);

//=============================================================================

int			nummodels;
dmodel_t	dmodels[MAX_MAP_MODELS];

int			numShaders;
dshader_t	dshaders[MAX_MAP_SHADERS];

int			entdatasize;
char		dentdata[MAX_MAP_ENTSTRING];

int			numleafs;
dleaf_t		dleafs[MAX_MAP_LEAFS];

int			numplanes;
dplane_t	dplanes[MAX_MAP_PLANES];

int			numnodes;
dnode_t		dnodes[MAX_MAP_NODES];

int			numleafsurfaces;
int			dleafsurfaces[MAX_MAP_LEAFFACES];

int			numleafbrushes;
int			dleafbrushes[MAX_MAP_LEAFBRUSHES];

int			numbrushes;
dbrush_t	dbrushes[MAX_MAP_BRUSHES];

int			numbrushsides;
dbrushside_t	dbrushsides[MAX_MAP_BRUSHSIDES];

int			numLightBytes;
byte		lightBytes[MAX_MAP_LIGHTING];

int			numGridPoints;
byte		gridData[MAX_MAP_LIGHTGRID];

int			numVisBytes;
byte		visBytes[MAX_MAP_VISIBILITY];

int			numDrawVerts;
drawVert_t	drawVerts[MAX_MAP_DRAW_VERTS];

int			numDrawIndexes;
int			drawIndexes[MAX_MAP_DRAW_INDEXES];

int			numDrawSurfaces;
dsurface_t	drawSurfaces[MAX_MAP_DRAW_SURFS];

int			numFogs;
dfog_t		dfogs[MAX_MAP_FOGS];

//=============================================================================

/*
=============
SwapBlock

If all values are 32 bits, this can be used to swap everything
=============
*/
void SwapBlock( int *block, int sizeOfBlock ) {
	int		i;

	sizeOfBlock >>= 2;
	for ( i = 0 ; i < sizeOfBlock ; i++ ) {
		block[i] = LittleLong( block[i] );
	}
}

/*
=============
SwapBSPFile

Byte swaps all data in a bsp file.
=============
*/
void SwapBSPFile( void ) {
	int				i;
	
	// models	
	SwapBlock( (int *)dmodels, nummodels * sizeof( dmodels[0] ) );

	// shaders (don't swap the name)
	for ( i = 0 ; i < numShaders ; i++ ) {
		dshaders[i].contentFlags = LittleLong( dshaders[i].contentFlags );
		dshaders[i].surfaceFlags = LittleLong( dshaders[i].surfaceFlags );
	}

	// planes
	SwapBlock( (int *)dplanes, numplanes * sizeof( dplanes[0] ) );
	
	// nodes
	SwapBlock( (int *)dnodes, numnodes * sizeof( dnodes[0] ) );

	// leafs
	SwapBlock( (int *)dleafs, numleafs * sizeof( dleafs[0] ) );

	// leaffaces
	SwapBlock( (int *)dleafsurfaces, numleafsurfaces * sizeof( dleafsurfaces[0] ) );

	// leafbrushes
	SwapBlock( (int *)dleafbrushes, numleafbrushes * sizeof( dleafbrushes[0] ) );

	// brushes
	SwapBlock( (int *)dbrushes, numbrushes * sizeof( dbrushes[0] ) );

	// brushsides
	SwapBlock( (int *)dbrushsides, numbrushsides * sizeof( dbrushsides[0] ) );

	// vis
	((int *)&visBytes)[0] = LittleLong( ((int *)&visBytes)[0] );
	((int *)&visBytes)[1] = LittleLong( ((int *)&visBytes)[1] );

	// drawverts (don't swap colors )
	for ( i = 0 ; i < numDrawVerts ; i++ ) {
		drawVerts[i].lightmap[0] = LittleFloat( drawVerts[i].lightmap[0] );
		drawVerts[i].lightmap[1] = LittleFloat( drawVerts[i].lightmap[1] );
		drawVerts[i].st[0] = LittleFloat( drawVerts[i].st[0] );
		drawVerts[i].st[1] = LittleFloat( drawVerts[i].st[1] );
		drawVerts[i].xyz[0] = LittleFloat( drawVerts[i].xyz[0] );
		drawVerts[i].xyz[1] = LittleFloat( drawVerts[i].xyz[1] );
		drawVerts[i].xyz[2] = LittleFloat( drawVerts[i].xyz[2] );
		drawVerts[i].normal[0] = LittleFloat( drawVerts[i].normal[0] );
		drawVerts[i].normal[1] = LittleFloat( drawVerts[i].normal[1] );
		drawVerts[i].normal[2] = LittleFloat( drawVerts[i].normal[2] );
	}

	// drawindexes
	SwapBlock( (int *)drawIndexes, numDrawIndexes * sizeof( drawIndexes[0] ) );

	// drawsurfs
	SwapBlock( (int *)drawSurfaces, numDrawSurfaces * sizeof( drawSurfaces[0] ) );

	// fogs
	for ( i = 0 ; i < numFogs ; i++ ) {
		dfogs[i].brushNum = LittleLong( dfogs[i].brushNum );
		dfogs[i].visibleSide = LittleLong( dfogs[i].visibleSide );
	}
}



/*
=============
CopyLump
=============
*/
int CopyLump( dheader_t	*header, int lump, void *dest, int size ) {
	int		length, ofs;

	length = header->lumps[lump].filelen;
	ofs = header->lumps[lump].fileofs;
	
	if ( length % size ) {
		Error ("LoadBSPFile: odd lump size");
	}

	memcpy( dest, (byte *)header + ofs, length );

	return length / size;
}

/*
=============
LoadBSPFile
=============
*/
void	LoadBSPFile( const char *filename ) {
	dheader_t	*header;

	// load the file header
	LoadFile (filename, (void **)&header);

	// swap the header
	SwapBlock( (int *)header, sizeof(*header) );

	if ( header->ident != BSP_IDENT ) {
		Error( "%s is not a IBSP file", filename );
	}
	if ( header->version != BSP_VERSION ) {
		Error( "%s is version %i, not %i", filename, header->version, BSP_VERSION );
	}

	numShaders = CopyLump( header, LUMP_SHADERS, dshaders, sizeof(dshader_t) );
	nummodels = CopyLump( header, LUMP_MODELS, dmodels, sizeof(dmodel_t) );
	numplanes = CopyLump( header, LUMP_PLANES, dplanes, sizeof(dplane_t) );
	numleafs = CopyLump( header, LUMP_LEAFS, dleafs, sizeof(dleaf_t) );
	numnodes = CopyLump( header, LUMP_NODES, dnodes, sizeof(dnode_t) );
	numleafsurfaces = CopyLump( header, LUMP_LEAFSURFACES, dleafsurfaces, sizeof(dleafsurfaces[0]) );
	numleafbrushes = CopyLump( header, LUMP_LEAFBRUSHES, dleafbrushes, sizeof(dleafbrushes[0]) );
	numbrushes = CopyLump( header, LUMP_BRUSHES, dbrushes, sizeof(dbrush_t) );
	numbrushsides = CopyLump( header, LUMP_BRUSHSIDES, dbrushsides, sizeof(dbrushside_t) );
	numDrawVerts = CopyLump( header, LUMP_DRAWVERTS, drawVerts, sizeof(drawVert_t) );
	numDrawSurfaces = CopyLump( header, LUMP_SURFACES, drawSurfaces, sizeof(dsurface_t) );
	numFogs = CopyLump( header, LUMP_FOGS, dfogs, sizeof(dfog_t) );
	numDrawIndexes = CopyLump( header, LUMP_DRAWINDEXES, drawIndexes, sizeof(drawIndexes[0]) );

	numVisBytes = CopyLump( header, LUMP_VISIBILITY, visBytes, 1 );
	numLightBytes = CopyLump( header, LUMP_LIGHTMAPS, lightBytes, 1 );
	entdatasize = CopyLump( header, LUMP_ENTITIES, dentdata, 1);

	numGridPoints = CopyLump( header, LUMP_LIGHTGRID, gridData, 8 );


	free( header );		// everything has been copied out
		
	// swap everything
	SwapBSPFile();
}


//============================================================================

/*
=============
AddLump
=============
*/
void AddLump( FILE *bspfile, dheader_t *header, int lumpnum, const void *data, int len ) {
	lump_t *lump;

	lump = &header->lumps[lumpnum];
	
	lump->fileofs = LittleLong( ftell(bspfile) );
	lump->filelen = LittleLong( len );
	SafeWrite( bspfile, data, (len+3)&~3 );
}

/*
=============
WriteBSPFile

Swaps the bsp file in place, so it should not be referenced again
=============
*/
void	WriteBSPFile( const char *filename ) {		
	dheader_t	outheader, *header;
	FILE		*bspfile;

	header = &outheader;
	memset( header, 0, sizeof(dheader_t) );
	
	SwapBSPFile();

	header->ident = LittleLong( BSP_IDENT );
	header->version = LittleLong( BSP_VERSION );
	
	bspfile = SafeOpenWrite( filename );
	SafeWrite( bspfile, header, sizeof(dheader_t) );	// overwritten later

	AddLump( bspfile, header, LUMP_SHADERS, dshaders, numShaders*sizeof(dshader_t) );
	AddLump( bspfile, header, LUMP_PLANES, dplanes, numplanes*sizeof(dplane_t) );
	AddLump( bspfile, header, LUMP_LEAFS, dleafs, numleafs*sizeof(dleaf_t) );
	AddLump( bspfile, header, LUMP_NODES, dnodes, numnodes*sizeof(dnode_t) );
	AddLump( bspfile, header, LUMP_BRUSHES, dbrushes, numbrushes*sizeof(dbrush_t) );
	AddLump( bspfile, header, LUMP_BRUSHSIDES, dbrushsides, numbrushsides*sizeof(dbrushside_t) );
	AddLump( bspfile, header, LUMP_LEAFSURFACES, dleafsurfaces, numleafsurfaces*sizeof(dleafsurfaces[0]) );
	AddLump( bspfile, header, LUMP_LEAFBRUSHES, dleafbrushes, numleafbrushes*sizeof(dleafbrushes[0]) );
	AddLump( bspfile, header, LUMP_MODELS, dmodels, nummodels*sizeof(dmodel_t) );
	AddLump( bspfile, header, LUMP_DRAWVERTS, drawVerts, numDrawVerts*sizeof(drawVert_t) );
	AddLump( bspfile, header, LUMP_SURFACES, drawSurfaces, numDrawSurfaces*sizeof(dsurface_t) );
	AddLump( bspfile, header, LUMP_VISIBILITY, visBytes, numVisBytes );
	AddLump( bspfile, header, LUMP_LIGHTMAPS, lightBytes, numLightBytes );
	AddLump( bspfile, header, LUMP_LIGHTGRID, gridData, 8 * numGridPoints );
	AddLump( bspfile, header, LUMP_ENTITIES, dentdata, entdatasize );
	AddLump( bspfile, header, LUMP_FOGS, dfogs, numFogs * sizeof(dfog_t) );
	AddLump( bspfile, header, LUMP_DRAWINDEXES, drawIndexes, numDrawIndexes * sizeof(drawIndexes[0]) );
	
	fseek (bspfile, 0, SEEK_SET);
	SafeWrite (bspfile, header, sizeof(dheader_t));
	fclose (bspfile);	
}

//============================================================================

/*
=============
PrintBSPFileSizes

Dumps info about current file
=============
*/
void PrintBSPFileSizes( void ) {
	if ( !num_entities ) {
		ParseEntities();
	}

	printf ("%6i models       %7i\n"
		,nummodels, (int)(nummodels*sizeof(dmodel_t)));
	printf ("%6i shaders      %7i\n"
		,numShaders, (int)(numShaders*sizeof(dshader_t)));
	printf ("%6i brushes      %7i\n"
		,numbrushes, (int)(numbrushes*sizeof(dbrush_t)));
	printf ("%6i brushsides   %7i\n"
		,numbrushsides, (int)(numbrushsides*sizeof(dbrushside_t)));
	printf ("%6i fogs         %7i\n"
		,numFogs, (int)(numFogs*sizeof(dfog_t)));
	printf ("%6i planes       %7i\n"
		,numplanes, (int)(numplanes*sizeof(dplane_t)));
	printf ("%6i entdata      %7i\n", num_entities, entdatasize);

	printf ("\n");

	printf ("%6i nodes        %7i\n"
		,numnodes, (int)(numnodes*sizeof(dnode_t)));
	printf ("%6i leafs        %7i\n"
		,numleafs, (int)(numleafs*sizeof(dleaf_t)));
	printf ("%6i leafsurfaces %7i\n"
		,numleafsurfaces, (int)(numleafsurfaces*sizeof(dleafsurfaces[0])));
	printf ("%6i leafbrushes  %7i\n"
		,numleafbrushes, (int)(numleafbrushes*sizeof(dleafbrushes[0])));
	printf ("%6i drawverts    %7i\n"
		,numDrawVerts, (int)(numDrawVerts*sizeof(drawVerts[0])));
	printf ("%6i drawindexes  %7i\n"
		,numDrawIndexes, (int)(numDrawIndexes*sizeof(drawIndexes[0])));
	printf ("%6i drawsurfaces %7i\n"
		,numDrawSurfaces, (int)(numDrawSurfaces*sizeof(drawSurfaces[0])));

	printf ("%6i lightmaps    %7i\n"
		,numLightBytes / (LIGHTMAP_WIDTH*LIGHTMAP_HEIGHT*3), numLightBytes );
	printf ("       visibility   %7i\n"
		, numVisBytes );
}


//============================================

int			num_entities;
entity_t	entities[MAX_MAP_ENTITIES];

void StripTrailing( char *e ) {
	char	*s;

	s = e + strlen(e)-1;
	while (s >= e && *s <= 32)
	{
		*s = 0;
		s--;
	}
}

/*
=================
ParseEpair
=================
*/
epair_t *ParseEpair( void ) {
	epair_t	*e;

	e = malloc( sizeof(epair_t) );
	memset( e, 0, sizeof(epair_t) );
	
	if ( strlen(token) >= MAX_KEY-1 ) {
		Error ("ParseEpar: token too long");
	}
	e->key = copystring( token );
	GetToken( qfalse );
	if ( strlen(token) >= MAX_VALUE-1 ) {
		Error ("ParseEpar: token too long");
	}
	e->value = copystring( token );

	// strip trailing spaces that sometimes get accidentally
	// added in the editor
	StripTrailing( e->key );
	StripTrailing( e->value );

	return e;
}


/*
================
ParseEntity
================
*/
qboolean	ParseEntity( void ) {
	epair_t		*e;
	entity_t	*mapent;

	if ( !GetToken (qtrue) ) {
		return qfalse;
	}

	if ( strcmp (token, "{") ) {
		Error ("ParseEntity: { not found");
	}
	if ( num_entities == MAX_MAP_ENTITIES ) {
		Error ("num_entities == MAX_MAP_ENTITIES");
	}
	mapent = &entities[num_entities];
	num_entities++;

	do {
		if ( !GetToken (qtrue) ) {
			Error ("ParseEntity: EOF without closing brace");
		}
		if ( !strcmp (token, "}") ) {
			break;
		}
		e = ParseEpair ();
		e->next = mapent->epairs;
		mapent->epairs = e;
	} while (1);
	
	return qtrue;
}

/*
================
ParseEntities

Parses the dentdata string into entities
================
*/
void ParseEntities( void ) {
	num_entities = 0;
	ParseFromMemory( dentdata, entdatasize );

	while ( ParseEntity () ) {
	}	
}


/*
================
UnparseEntities

Generates the dentdata string from all the entities
This allows the utilities to add or remove key/value pairs
to the data created by the map editor.
================
*/
void UnparseEntities( void ) {
	char	*buf, *end;
	epair_t	*ep;
	char	line[2048];
	int		i;
	char	key[1024], value[1024];

	buf = dentdata;
	end = buf;
	*end = 0;
	
	for (i=0 ; i<num_entities ; i++) {
		ep = entities[i].epairs;
		if ( !ep ) {
			continue;	// ent got removed
		}
		
		strcat (end,"{\n");
		end += 2;
				
		for ( ep = entities[i].epairs ; ep ; ep=ep->next ) {
			strcpy (key, ep->key);
			StripTrailing (key);
			strcpy (value, ep->value);
			StripTrailing (value);
				
			sprintf (line, "\"%s\" \"%s\"\n", key, value);
			strcat (end, line);
			end += strlen(line);
		}
		strcat (end,"}\n");
		end += 2;

		if (end > buf + MAX_MAP_ENTSTRING) {
			Error ("Entity text too long");
		}
	}
	entdatasize = end - buf + 1;
}

void PrintEntity( const entity_t *ent ) {
	epair_t	*ep;
	
	printf ("------- entity %p -------\n", ent);
	for (ep=ent->epairs ; ep ; ep=ep->next) {
		printf( "%s = %s\n", ep->key, ep->value );
	}

}

void 	SetKeyValue( entity_t *ent, const char *key, const char *value ) {
	epair_t	*ep;
	
	for ( ep=ent->epairs ; ep ; ep=ep->next ) {
		if ( !strcmp (ep->key, key) ) {
			free (ep->value);
			ep->value = copystring(value);
			return;
		}
	}
	ep = malloc (sizeof(*ep));
	ep->next = ent->epairs;
	ent->epairs = ep;
	ep->key = copystring(key);
	ep->value = copystring(value);
}

const char 	*ValueForKey( const entity_t *ent, const char *key ) {
	epair_t	*ep;
	
	for (ep=ent->epairs ; ep ; ep=ep->next) {
		if (!strcmp (ep->key, key) ) {
			return ep->value;
		}
	}
	return "";
}

vec_t	FloatForKey( const entity_t *ent, const char *key ) {
	const char	*k;
	
	k = ValueForKey( ent, key );
	return atof(k);
}

void 	GetVectorForKey( const entity_t *ent, const char *key, vec3_t vec ) {
	const char	*k;
	double	v1, v2, v3;

	k = ValueForKey (ent, key);

	// scanf into doubles, then assign, so it is vec_t size independent
	v1 = v2 = v3 = 0;
	sscanf (k, "%lf %lf %lf", &v1, &v2, &v3);
	vec[0] = v1;
	vec[1] = v2;
	vec[2] = v3;
}