cutscene "somefile.anm" { delay 10 } // defines somefile.anm with a delay of 10 120Hz tics between frames. a more typical framerate method may come later, but this is how the originals worked.
Once defined, they can be played through CON with the new playback command, also called "cutscene". It works like this:
definequote 12345 somefile.anm
define ANIM_SOMEFILE 12345
...
cutscene ANIM_SOMEFILE // halts game execution and immediately plays cutscene, resuming execution when finished
...
Sounds can be played during animations (and tiles can be overlaid, etc) like this:
onevent EVENT_CUTSCENE
ifcutscene ANIM_SOMEFILE
{
ifvare RETURN 12 // frame 12
sound FLY_BY
rotatesprite ...
}
endevent
The value of the RETURN var at the end of EVENT_CUTSCENE determines the next frame to play. This can be used for looping, etc. Attempting to play animations backwards outright is not advised as animations only seek in one direction (so rewinding requires running it through from frame 0 again). This is will WIP and hasn't been heavily tested at all, so please try it out.
git-svn-id: https://svn.eduke32.com/eduke32@4987 1a8010ca-5511-0410-912e-c29ae57300e0
And preventing enormous corruption due to a free() called on a garbage (malloc'd)
pointer values this time. DO_BUILD_VERY_FAST_PLEASE!
git-svn-id: https://svn.eduke32.com/eduke32@4980 1a8010ca-5511-0410-912e-c29ae57300e0
Since TILE_TILT is only allocated once, it must be done with the maximum
possible size.
git-svn-id: https://svn.eduke32.com/eduke32@4965 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the out-of-bounds read of former g_player[] in VM_EventCommon_().
git-svn-id: https://svn.eduke32.com/eduke32@4961 1a8010ca-5511-0410-912e-c29ae57300e0
This prevents a enormous leak being reported by LeakSanitizer. Not that it
matters much, since we most frequently free models only at exit. (Sometimes one
may be freed earlier though -- if there was an error loading it, AFAICS.)
git-svn-id: https://svn.eduke32.com/eduke32@4952 1a8010ca-5511-0410-912e-c29ae57300e0
This makes sure that the engine arrays have sufficient space allocated for usage
in Mapster32's 2D mode, for example from drawmapview().
git-svn-id: https://svn.eduke32.com/eduke32@4938 1a8010ca-5511-0410-912e-c29ae57300e0
In setview(), we now assert windowx2 < xdim. The only calling places where its
non-violation is non-trivial to ascertain are (1) showview from CON and
(2) draw-to-tile for look-sideways in game.c. AFAICS case 1 should be fine.
Case 2 is adapted; see comments there.
git-svn-id: https://svn.eduke32.com/eduke32@4935 1a8010ca-5511-0410-912e-c29ae57300e0
replacements for the first handful of palette lookups) w8th superior
"luma" method. DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4889 1a8010ca-5511-0410-912e-c29ae57300e0
This should prevent Lunar Apocalypse from becoming Nuclear Winter with Megaton on Linux and Mac.
git-svn-id: https://svn.eduke32.com/eduke32@4886 1a8010ca-5511-0410-912e-c29ae57300e0
By setting DISTRECIPSIZ to 131072, as far as I can see the absolute maximum
that's possible with the integer scaling convention of the voxel drawing code.
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4881 1a8010ca-5511-0410-912e-c29ae57300e0
- Work around a sequencing issue (assignment of searchstat) in
M32_DrawRoomsAndMasks()
- When having sprites highlighted and changing shade, since r1943 change
every highlighted sprite's shade if one of them is aimed at. With this
revision, if SHIFT is pressed while doing that, only change the aimed at
sprite's shade
- a.m32: Use 'break' from a state instead of 'return'. The former may be
"sticky" in a way that is not intended. Needs to be debugged later.
- Update instructions in m32script_ex.map
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4880 1a8010ca-5511-0410-912e-c29ae57300e0
Also for polymost_scansector(). These were likely of little consequence
because collection in scansector() is the exception than the rule (see
added comments), and because the redundant drawwalls() would find the
x range done the second and following times.
Also, add a bound check for sectorborder[] (the limit was probably rarely
hit in practice, but the check is mandatory nontheless) and add functions
printscans() and printbunches() in the DEBUGGINGAIDS=2 build.
git-svn-id: https://svn.eduke32.com/eduke32@4877 1a8010ca-5511-0410-912e-c29ae57300e0
There were various issues with that code.
- It does not seem to be very meaningful to do so.
- It was carried out on the same range as the sprites sorted by z coordinate
(those with equal x/y) just a few lines away, effectively overriding it.
The former is very meaningful, though.
- It led to inconsistencies between editor and game, see
http://forums.duke4.net/topic/775-eduke32-20-and-polymer/page__view__findpost__p__214873
git-svn-id: https://svn.eduke32.com/eduke32@4876 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out calculation of player-relative and screen+clipped-player-relative
coordinates into get_rel_coords() and get_screen_coords(), respectively
- the usual beautification stuff, especially since we're now on C99
git-svn-id: https://svn.eduke32.com/eduke32@4875 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, the C function clipmove() returned negative values when hit a
wall (32768+wallnum) or sprite (49152+spritenum) because internally,
these values were encoded into a *signed* 16-bit integer. This made no
difference to C code using it, since it always proceeded by bit checks,
but was inconsistent with documentation on CON 'clipmove' on the wiki.
The following commands are affected too, since they use the value returned
by clipmove(): 'clipmovenoslide', 'movesprite'. Also, the value of
actor[].movflag ('htmovflag' from CON).
Also, fix 'clipmove*' in LunaCON and add lunatic/test/checknearwall.con
as an example of how to implement a being-close-to-a-wall checker as
requested in
http://forums.duke4.net/topic/7869-determining-closeness-to-a-wall/
git-svn-id: https://svn.eduke32.com/eduke32@4874 1a8010ca-5511-0410-912e-c29ae57300e0
- At a given time, at most one viewscreen may display TILE_VIEWSCR, namely
that one which is g_curViewscreen
- sync kinds of distance to compare against VIEWSCREEN_ACTIVE_DISTANCE (was
Manhattan vs. dist(), now both the latter)
- fix resetting to VIEWSCREEN tile when player is greater from it than that
distance. When the player is closer to it again, it is *not* reset to
TILE_VIEWSCR.
- more sync'd g_curViewscreen and sprite[i].yvel (for 'i' being the viewscreen
sprite)
Note: in a multiplayer context, this needs to be thought about once more.
git-svn-id: https://svn.eduke32.com/eduke32@4843 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, we must make sure that dasizeof <= LZWSIZE (or so) in
c1d_{read,write}_compressed() (what the assertion in the last commit was about,
and is now redundant). This fixes saving of e.g. large gamearrays with the C-CON
build. Bump BYTEVERSION.
An alternative for setting dasizeof to 1 would be to factor it and keep dividing
as long as it's > LZWSIZE.
git-svn-id: https://svn.eduke32.com/eduke32@4838 1a8010ca-5511-0410-912e-c29ae57300e0
Analogously to the way models are processed in a deferred manner for Polymer.
git-svn-id: https://svn.eduke32.com/eduke32@4836 1a8010ca-5511-0410-912e-c29ae57300e0
defs.c: sync some dup'd code for 'definevoxel' and 'voxel' DEF tokens.
engine.c: factor out PolymerProcessModels().
git-svn-id: https://svn.eduke32.com/eduke32@4835 1a8010ca-5511-0410-912e-c29ae57300e0
This prevents displaying W_FORCEFIELD+1 masks (as e.g. in front of viewscreens)
completely black with ART mapping. The old behavior, which is inconsistent with
classic, is kept for one-sided masked walls, though.
git-svn-id: https://svn.eduke32.com/eduke32@4830 1a8010ca-5511-0410-912e-c29ae57300e0
*Move the FPS display down from the top of the screen, as we do for quotes.
*Don't show a non-functional mouse cursor in the center of the screen.
*Don't display the "Startup window" option in Game Settings.
*Display the IR pointer crosshair in addition to the aiming crosshair, not instead of it.
*Eliminate some assumptions from wiibuild.bat.
*DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4818 1a8010ca-5511-0410-912e-c29ae57300e0
So that stack traces can be gotten with optimized DEBUGANYWAY builds, e.g. for
Linux's 'perf' --> flame graphs. DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4817 1a8010ca-5511-0410-912e-c29ae57300e0
Now passed as last arg 'noFloorPal' to makepalookup(). Used as follows:
- from loadlookups(): *false*, i.e. do take over floor pal.
- from generatefogpals() [default fog pals] and fillemptylookups(): *true*,
i.e. don't take over floor pal
- from DEF 'fogpal': true
- from DEF 'makepalookup': take over flag from pal from which we are remapping,
or set to true if remapping from pal 0
- (CROSSHAIR_PAL: true)
This should make the issue reported in
http://forums.duke4.net/topic/775-eduke32-20-and-polymer/page__view__findpost__p__197583
resolve in a natural manner.
git-svn-id: https://svn.eduke32.com/eduke32@4812 1a8010ca-5511-0410-912e-c29ae57300e0
- 'nofloorpalrange' DEF token: now handled for both game and editor (for the
latter, it's effective only for "shade preview" mode, [']+[X]).
- in generatefogpals(), assign g_noFloorPal[] = 1 for every generated (default)
fog pal; get rid of its return value / g_firstFogPal
git-svn-id: https://svn.eduke32.com/eduke32@4811 1a8010ca-5511-0410-912e-c29ae57300e0
This reverts/corrects two semantic changes of r4639 as far as what is now
voxmodel.c (formerly part of mdsprite.c) is concerned. One correction ends
up having no effect (m->bscale is always 1.f for voxel models, as far as I
can see), but is the proper rewrite.
Also, in osdcmds.c:registerosdcommands(), tweak two help strings.
git-svn-id: https://svn.eduke32.com/eduke32@4800 1a8010ca-5511-0410-912e-c29ae57300e0
Since we're targeting C99/C++ now, we can finally declare variables as close
to their use as possible.
git-svn-id: https://svn.eduke32.com/eduke32@4797 1a8010ca-5511-0410-912e-c29ae57300e0
