biwa
29643d98b4
OBJ model exporter: fixed a problem where texture UV values were NaN when a texture was not fully loaded prior to exporting. Fixes #1015
2024-02-03 14:19:04 +01:00
biwa
77ed089917
Linedefs Mode: fixed an issue where aligning flats to lines through the "Linedefs" menu would round the offsets to whole numbers. Now it rounds to 6 decimal places, which is in line with aligning flats in Visual Mode
2024-01-12 14:14:38 +01:00
biwa
5ff0bc76db
Sectors Mode: fixed a problem where dragging a single highlighted sector did not move the things in the sector when synchronized things editing was enabled
2024-01-06 15:15:39 +01:00
biwa
957bec7f43
Autosave map functionality ( #995 )
...
Added autosaving of the current map. Autosaving happens in intervals when the map is changed. It will not overwrite the current map, but rather create new files, just like backups. Autosaving interval and number of files can be configured in the "Recovery" tab of the preferences. Autosaving can also be disabled there (not recommended). Autosaves will not have their nodes built for performance reason.
2023-12-15 22:49:28 +01:00
biwa
6e08cc8e68
Visual Mode: more skewing fixes
2023-11-19 16:56:13 +01:00
biwa
f7373f7534
Visual Mode: fixed a problem where texture skewing didn't work correctly for textures scaled through sidedef properties. Fixes #985
2023-11-19 16:53:36 +01:00
biwa
28630b9777
Game Configurations: added texture skewing options to the GZDoom game configurations
...
Visual Mode: added support for GZDoom style texture skewing
2023-11-04 21:43:09 +01:00
biwa
728eea84b2
Visual Mode: the effect of slope things are now only applied if they are specified in the game configuration
2023-10-21 16:11:35 +02:00
biwa
807df65279
Game Configurations: added support for enabling or disabling support for vertex heights in UDMF game configurations
2023-10-21 14:45:42 +02:00
biwa
ca6769b715
Visual Mode: fixed a problem where flood selection did not work correctly when sidedefs were previously marked by other actions
2023-10-14 22:30:29 +02:00
biwa
e97aa905eb
Visual Mode: fixed a problem where flood selection would operate from all selected surfaces and not just the clicked on one. This behavior can be reverted by enabling the "Use buggy flood select in Visual Mode" option in Preferences -> Editing
2023-10-14 14:24:09 +02:00
biwa
9d8ddfad35
OBJ Exporter: fixed a problem where the wrong textures were used on 3D floors when they have the "use upper/lower texture" flag set
2023-10-03 19:23:03 +02:00
biwa
7834bd1f15
OBJ Exporter: fixed a problem where 3D floor sides were not exported correctly. Fixes #963
2023-10-03 19:18:33 +02:00
biwa
2b40a08f13
Visual Mode: fixed a problem where floors/ceilings could not be changed in size if the user tried to change their texture offset in a non-UDMF map
2023-09-29 20:44:04 +02:00
biwa
efcce48953
Visual Mode: fixed a problem where sloped 3D floors with an alpha value of less than 128 were not shown at all instead of fully opaque. Fixes #954
2023-09-17 17:23:27 +02:00
biwa
59197fdfe0
Visual Mode: fixed a problem where scaled sprites were shown with the wrong offset
2023-09-17 17:03:58 +02:00
wisselstem
63010d871a
Draw Curve Mode, Draw Ellipse Mode, Draw Rectangle Mode: added option to place things at the designated vertex positions instead of drawing geometry ( #956 )
2023-09-17 15:39:19 +02:00
wisselstem
01bcdc01b2
Point Thing at Cursor: check for a thing's fixedrotation rather than its category's arrow setting ( #957 )
2023-09-17 13:06:57 +02:00
biwa
ed93c4d69b
Visual Mode: looking through selection now applies the thing's pitch to the camera
2023-09-17 13:05:50 +02:00
biwa
1d6c2a1c13
Visual Mode: when applying camera rotation and pitch to things a status message will now be displayed. Fixes #955
2023-09-17 12:40:28 +02:00
wisselstem
32cfe294e2
Things Mode: update things filter when clone-dragging things ( #951 )
2023-09-08 19:19:57 +02:00
biwa
809bb24ae0
Visual Mode: fixed an issue where trying to apply a rotation to things that were not seen yet would cause a crash
2023-09-06 19:20:12 +02:00
biwa
3a7d926704
Image Exporter: added support for transparency
2023-09-03 15:39:34 +02:00
wisselstem
edc4c2bd16
Visual Mode: prevent crash if no potential slope handles are found ( #949 )
2023-09-02 14:21:40 +02:00
biwa
5c76efb8c0
Fixed a problem where not selected geometry and things could not be dragged when the "don't move selection if any part of it is outside of map boundary" option was enabled
2023-08-26 13:49:00 +02:00
biwa
1d0430d48e
Visual Mode: fixed a problem where the selection order was not kept when synchronized selection between visual and classic modes was enabled. Fixes #938
2023-08-12 16:43:07 +02:00
biwa
1a116574b9
Visual Mode: fixed a problem where things directly touching the top of 3D floors were rendered with the incorrect brightness. Fixes #940
2023-08-12 11:15:13 +02:00
samwiddowson
19b8bd1e6c
Edit Selection Mode: Fix Ceiling/Floor transforms when pinned ( #943 )
2023-08-11 18:25:49 +02:00
biwa
f56ae2e0c9
Visual Mode: Fixed problem where UDB-internal sprites were shown with a wrong offset
2023-08-02 20:39:28 +02:00
biwa
085df399f5
Fixed an issue where sprite offsets defined in TEXTURES were not used
2023-07-29 13:32:42 +02:00
biwa
f34ab6a606
Visual Mode: changes to Eternity Engine's upper/lower texture skewing definitions are now shown in Visual Mode
2023-07-15 18:45:58 +02:00
biwa
58480f5b31
Visual Mode: fixed a crash when toggling visual vertex slope picking and the map contains double-sided linedefs without a front sidedef. Fixes #928
2023-07-09 14:18:24 +02:00
biwa
4dba3a9234
Texture skewing:
...
- fixed a rare condition where skewed mid textures were not clipped correctly
- fixed a problem where translucent mid textures were not skewed correctly
- fixed a problem where sprites were skewed unintentionally
2023-07-09 11:45:47 +02:00
biwa
9c35a8f65d
Eternity Engine: added support for texture skewing in Visual Mode ( #930 )
2023-07-08 22:39:50 +02:00
wisselstem
55e2d5a902
Add toasts to Visual Mode's "Show Things" action ( #922 )
2023-06-27 20:40:22 +02:00
biwa
6f047e4347
Draw Grid Mode: fixed a problem where "continuous drawing" would redraw all previously drawn shapes each time a drawing was finished. Fixes #912
2023-06-19 20:27:26 +02:00
biwa
bc98a5391f
Added action to change the index of linedefs, things, sectors, and vertices. Can be accessed through a shortcut (not bound by default) or the menu of the respective mode ( #903 )
2023-06-09 11:17:01 +02:00
wisselstem
0d4cecc134
Edit Selection Mode: added support for (counter)clockwise rotation actions ( #900 )
2023-06-09 09:54:23 +02:00
wisselstem
d2a4dcffce
Edit Selection Mode: added actions for moving the selection around the grid ( #888 )
2023-05-26 20:56:30 +02:00
biwa
86f1532a9f
Edit Selection Mode: fixed a problem where floor and ceiling textures were unintentionally scaled in UDMF when resizing the selection. Fixes #873
2023-04-22 19:38:18 +02:00
biwa
bb7857d2bb
Map Analysis Mode: fixed a problem where lines with fractional vertex positions could erroneously be reported as overlapping
2023-03-03 09:53:08 +01:00
biwa
f839269a72
Disabled visual sloping for game configurations that do not support plane equation slopes. Fixes #828
...
Added toasts for visual sloping events
2022-11-27 11:02:26 +01:00
biwa
204982e5f8
Add support for toasts ( #817 )
...
Behavior can be configured in the "Toasts" tab in the preferences.
2022-11-06 15:08:22 +01:00
biwa
9e5a6b5377
Tag Range plugin: fixed a problem where the new tags were not displayed in Sectors Mode when selection numbering was disabled. Fixes #795
2022-10-03 11:29:31 +02:00
biwa
9c4c63a749
Sectors Mode: fixed a regression where sector labels were not updated after editing sectors. Fixes #793
2022-09-21 21:05:30 +02:00
biwa
fa5c741b76
Fixed a regression where editing map elements did not preserve the selection order, but used the index order instead. Fixes #791
2022-09-20 23:52:41 +02:00
biwa
179f72068f
Things/Linedefs/Sectors/Vertices Modes: standardized how editing and selection works:
...
- editing a highlighted, not selected map element will deselect other selected map elements, then start editing the highlighted map element
- dragging a highlighted, not selected map element will deselect other selected map elements, then start dragging the highlighted map element
- dragging a single map element will keep its selection state. I.e. dragging a selected map element will not deselect it after dragging anymore
- dragging a highlighted, not selected thing will not select it after dragging
- dragging a highlighted, not selected sector, while other sectors are selected, will only drag the highlighted sector, and not the selected sector (and deselect the selected sectors)
2022-09-18 16:54:09 +02:00
biwa
d2967e7a78
Linedefs Mode: fixed a problem where the "Select Single-sided only" and "Select Double-sided only" actions would still display the selection numbers of deselected linedefs
2022-08-28 18:25:50 +02:00
biwa
4f526dc57f
Toolbar buttons now show their assigned shortcut key in their tool tip
2022-05-28 16:19:01 +02:00
biwa
a1df690ae4
Merge branch 'master' of https://github.com/jewalky/UltimateDoomBuilder
2022-05-09 23:16:21 +02:00
