Fixed, Things mode: thing selection labels must be updated when performing undo/redo.
Fixed another case of invalid sectors being created after dragging map elements when using "Merge Dragged Geometry" and "Replace with Dragged Geometry" drag modes.
Added, Map Analysis mode: added "Edit Thing..." option to "Unknown Thing" and "Obsolete Thing" error check results.
Added: a warning is now displayed when a thing has both voxel and model attached.
Changed, Thing/Linedef Info panels: unknown ACS script names/numbers are now shown in red.
Fixed, Edit Things window, UDMF: unneeded undo was created when opening the window.
Re-fixed: in some cases invalid sectors were created after dragging map elements when using "Merge Dragged Geometry" and "Replace with Dragged Geometry" drag modes, when at least one of dragged linedef was facing into an enclosed void area (previous fix entirely disabled the associated logic).
Fixed: in some cases invalid sectors were created after dragging map elements when using "Merge Dragged Geometry" and "Replace with Dragged Geometry" drag modes, when at least one of dragged linedef was facing into an enclosed void area.
Fixed a crash after drawing lines over a sector with unclosed/invalid boundaries.
Fixed(?): probably fixed a crash when closing Script Editor with an unsaved file during program termination.
Changed, Sectors mode: "Flip Linedefs" and "Align Linedefs" actions will no longer flip single-sided linedefs with only front side.
Fixed, Script Editor: fixed a crash when trying to update script navigator combo box when switching to a never saved ACS script.
Changed, "Align Things to Nearest Linedef" action: the action can now also align things with FLATSPRITE and WALLSPRITE flags (previously only things with attached models were aligned).
Changed, "Align Things to Nearest Linedef" action: the action can now align things to the middle part of double-sided linedef, if it has a middle texture assigned.
Changed, Map Analysis mode: the view is now much more zoomed after clocking on a "Check very short linedefs" error check result.
Removed single testing engine launchable by the editor at once limitation (it worked properly only when using Test map actions anyway).
Fixed: re-did the fix for invalid geometry created when drawing very large grids from R2653, because it caused other issues.
Fixed, Draw Grid mode: in some cases invalid geometry was created when drawing very large grids.
Fixed, Things mode, "Rotate Clockwise" action: fixed inability to change thing angle from 0 to 315 when "doomthingrotationangles" Game Configuration property was set to true.
Updated ZDoom_DECORATE.cfg.
Changed: multi-part sectors are now better preserved after drawing new lines.
Changed, TEXTURES parser: patch loading errors are now ignored for textures with "NullTexture" option.
Changed, Game configurations: changed default door action arguments to better match vanilla ones.
Fixed, Actions: in some cases keyboard shortcuts involving Ctrl/Alt/Shift modifier keys were displayed incorrectly.
Fixed(?): probably fixed inability to save map wad in Slade 3.
Updated ZDoom_ACS.cfg.
Updated ZDoom_DECORATE.cfg.
Updated ZDoom ACC.
Updated model pitch handling to match current GZDoom implementation.
Fixed imprecise vertex coordinates generated by Draw Ellipse mode.
Fixed a resource loading exception when opened map file wad was located in the root of a Directory resource.
Internal: changed output of all InterpolationTools methods from int to float.
Fixed, Internal: InterpolationTools.InterpolateColor() delta usage was inverted.
- "Merge Dragged Vertices Only". Only vertex-line intersections will be processed (DB2 mode).
- "Merge Dragged Geometry". Geometry merging will be performed.
- "Replace with Dragged Geometry". Dragged geometry will replace underlaying geometry.
You can switch between these using 3 new actions, top toolbar buttons and Edit menu buttons.
Changed: activating the same 2D mode repeatedly now toggles View modes.
Renamed "Merge Geometry" action/menu item to "Snap to Geometry".
More fixes to vertex/linedef/sector dragging logic.
Updated ZDoom_DECORATE.cfg.
Fixed, Edit Selection mode: texture scale was flipped when "Floor/Ceiling Transform" -> "Scale" was enabled.
Changed: a warning is no longer displayed when trying to compile an empty SCRIPTS lump.
Updated ZDoom_DECORATE.cfg.
Fixed, Drag Linedefs, Drag Vertices, Edit Selection modes: in some cases sidedefs were incorrectly removed when modifying a closed section of a multi-part sector.
Fixed, Drag Linedefs, Drag Vertices, Drag Sectors, Edit Selection modes: in some cases sidedef textures were not adjusted after applying the modes, leaving middle textures on double-sided lines.
Removed "Adjust heights to match relatively with surrounding sector" option from Preferences -> Pasting, because sector height adjustments are now handled by Edit Selection mode.
Fixed, Sector info panel: in some cases 0 deg. floor/ceiling texture rotation was triggering texture offset/scale/rotation UI parts to be shown.
Fixed even more cases when sidedefs belonging to linedefs, which were moved on top of existing linedefs, were incorrectly reassigned when applying Edit Selection and Drag Geometry modes.
Fixed, Bridge mode: in some cases calculated floor/ceiling heights were not applied to the sectors created by the mode.
Changed, internal: changed program's CurrentCulture to InvariantCulture.
Fixed: in some cases sidedefs belonging to linedefs, which were moved on top of existing linedefs, were incorrectly reassigned when applying Edit Selection and Drag Geometry modes.
Fixed: Tag Explorer update fix from R2630 was accidentally placed in an UDMF-only if-block.
Updated ZDoom_DECORATE.cfg (A_WeaponOffset).
Updated documentation ("(G)ZDoom text lumps support" page).
Fixed, Visual mode: both "With same texture" and "With same height" Select modifiers are now checked when both of them are used at once (previously a sidedef part/floor/ceiling was selected when any of those matched).
Fixed severe lock-up after finishing dragging many vertices/linedefs/sectors in Classic modes.
Updated documentation ("Synchronizing camera position").
Currently this will work as intended only if the selection ends up either completely inside a single sector or completely outside of any sector. Also this logic won't be applied if the selection contains the lines with only start or end vertex selected.
Internal: some TextLabel refactoring.
Changed, Draw Lines mode: line angles are now shown only when "Show guidelines" mode is enabled.
Fixed, Draw Lines mode: in some cases "Snap to cardinal directions" mode was snapping only to diagonals.
Fixed, Draw Lines mode: snap to geometry behaved incorrectly when "Snap to cardinal directions" mode was enabled.
Changed, Things mode: dynamic light shape is now drawn using highlight color when a dynamic light thing is highlighted.
Added more sanity checks to MODELDEFS parser.
Fixed, Things mode: in some cases selection labels were not updated after editing a thing.
Fixed, Things mode: selection labels were positioned incorrectly on things with FixedSize setting.
Fixed, Sectors mode: fixed a crash when selecting self-referencing sector when selection labels were enabled.
Fixed, Visual mode: in some cases Auto-align texture actions were not working when "use long texture names" Map Options setting was enabled.
Fixed, MD2/MD3 loader: available animation frames upper bound check was performed incorrectly, which would cause a crash in some very special cases.
Fixed, Game configurations: most Hexen/ZDoom teleport actions use TeleportDests as teleport targets, not MapSpots.
Added, Draw Line and Draw Curve modes: added "Auto-finish drawing" setting. When enabled, the modes will automatically finish drawing when currently drawn lines and already existing level geometry form a closed shape.
Changed: sector-wise linedef flipping is now done using the new "Align Linedefs" action. "Flip Linedefs" action works the same as in DB2 again.
Changed: when a map was already loaded, using "Open Map" action will use that map's directory as the starting directory.
Changed: official IWADs can no longer be saved.
Changed: disabled lump ranges/duplicate entries checks for official IWADs.
Changed: wad type is now preserved when saving a map (previously all wads were saved as PWADs).
Changed: moved Updater.exe launch much closer to the editor termination point to avoid any chance of it closing the editor before it properly closes itself.
Updated ZDoom_DECORATE.cfg (A_Blast).
Updated documentation.
Fixed, Visual mode: in some cases GLDEFS glow effect was not updated after changing floor/ceiling texture.
Fixed, Draw Rectangle and Draw Ellipse modes: in some cases pressing "Reset" button did not update the shape preview.
Fixed, DB2 bug: sector geometry was not updated after undoing "Flip Sidedefs" action.
Fixed, Tags selector, UDMF: tags from sector with the longest array of tags was applied to sectors with shorter arrays of tags.
Fixed, Draw Settings panel: sidedef texture overrides were not applied when "Auto-clear sidedef textures" setting was enabled.
Added, Thing Edit window, UDMF: added "Show user-added custom fields only" checkbox.
Fixed, Visual mode: "Select with the same texture" action should not select invisible geometry (like sidedef parts hidden by slopes).
Changed, Sector drawing: default sector height is now used when the nearest sector's height is <= 0.
Added "Toggle sky rendering" action and toolbar button.
Added, MAPINFO parser: the editor now recognizes map number from classic map definition format. Hexen MAPINFO is now properly parsed.
Added, MAPINFO support: if current map definition contains map name as a text string, it will be shown in the editor's header.
Changed: "Toggle dynamic lights rendering" now toggles between "Don't show dynamic lights" and "Show dynamic lights" when used in Classic modes.
Changed, Things mode: lowered the opacity of dynamic light radii.
Changed, (G)ZDoom text parsers: empty include files now trigger a warning instead of an error and no longer abort parsing.
Fixed, Game configurations: moved Stalagmite:5050 thing to Doom block (so the editor no longer tries to load it for non-Doom game configurations).
Fixed(?), Visual mode: probably fixed a hard-to-trigger exception when sorting translucent geometry.
Fixed, Visual mode: floor glow effect was incorrectly applied to walls (was broken in R2452).
Internal: restructured most of MAPINFO and GLDEFS parsers. Should be more maintainable now.
Updated ZDoom ACC.
Updated zdbsp to 1.19.
Updated documentation.
Fixed, Map Analysis mode: fixed a crash when trying to dissolve an invalid sector when one of it's linedefs referenced it on the both sides.
Fixed, Sectors mode: fixed incorrect undo description when deleting sectors.
Internal: joined declaration and assignment of some more variables.
Internal, Renderer2D.RenderArrows(): only visible lines are now rendered.
Internal, API: renamed public Line3D properties: v1 to Start, v2 to End, color to Color, renderarrowhead to RenderArrowhead.
Added "Paste Properties Special" actions in "Classic" and "Visual" categories. They work the same way as "Paste Special" action.
Added: "Copy Properties", "Paste Properties" and "Paste Properties Special" options are now shown in the Edit menu if current classic mode supports them.
Changed, Paste Properties Special window: only options relevant to current map format are now displayed.
Changed, Paste Properties Special window, UDMF: all UI-managed options are now available.
Fixed: MAPINFO parser was unable to process "include" directives.
Fixed, General interface: selection info was reset to "Nothing selected" after few seconds regardless of current selection.
Fixed, Visual mode: thing bounding boxes were not updated when changing things positions using Randomize mode.
Fixed, Visual mode: event lines were displayed at incorrect height when entering Visual mode for the first time.
Fixed, Texture Browser window: when MixTexturesFlats Game Configuration option is disabled, textures/flats are no longer shown in the Used group when flats/textures with the same names are used in the map.
Fixed(?): probably fixed an exception some users reported when trying to initialize a Classic mode after switching from Visual mode with "Sync cameras" option enabled.
Changed, Game configurations, Thing Categories: a block must have at least one thing category property to be recognized as a thing category.
Changed, Visplane Explorer: the plugin now outputs more info when it fails to initialize vpo.dll.
Cosmetic, Thing Edit window, Doom/Hexen map format: adjusted UI layout so thing flags control no longer displays scrollbars in Hexen map format.
Internal: merged methods from UDMFTools into UniFields, removed UDMFTools.
Updated Inno Setup script (added VC++ 2008 SP1 distributive).
Updated ZDoom_DECORATE.cfg (A_CheckBlock).
Updated documentation (added "System Requirements" page).
Changed, Things, Sectors, Linedefs, Vertices modes: we shouldn't select highlighted map element during the copy action when no map elements are selected.
Internal: removed some debug stuff from CheckTextureAlignment and ResultTexturesMisaligned.
Fixed, Visual mode, UDMF: sector geometry cache was not updated after using "Match Brightness" and "Change Brightness" actions on ceilings, so the changes made by them were not visible when using Classic modes in "View Ceiling Textures" mode.
Fixed, Visual mode, UDMF: "Match Brightness" and "Change Brightness" actions set brightness incorrectly in some cases.
Fixed: ACS script names gathering logic was unable to process relative #include and #import paths (like '#import "..\acs\qtilt.acs"').
Updated ZDoom_DECORATE.cfg.
