doom3-bfg/neo/libs/jpeg-6/jcsample.cpp

/*
 * jcsample.c
 *
 * Copyright (C) 1991-1994, Thomas G. Lane.
 * This file is part of the Independent JPEG Group's software.
 * For conditions of distribution and use, see the accompanying README file.
 *
 * This file contains downsampling routines.
 *
 * Downsampling input data is counted in "row groups".  A row group
 * is defined to be max_v_samp_factor pixel rows of each component,
 * from which the downsampler produces v_samp_factor sample rows.
 * A single row group is processed in each call to the downsampler module.
 *
 * The downsampler is responsible for edge-expansion of its output data
 * to fill an integral number of DCT blocks horizontally.  The source buffer
 * may be modified if it is helpful for this purpose (the source buffer is
 * allocated wide enough to correspond to the desired output width).
 * The caller (the prep controller) is responsible for vertical padding.
 *
 * The downsampler may request "context rows" by setting need_context_rows
 * during startup.  In this case, the input arrays will contain at least
 * one row group's worth of pixels above and below the passed-in data;
 * the caller will create dummy rows at image top and bottom by replicating
 * the first or last real pixel row.
 *
 * An excellent reference for image resampling is
 *   Digital Image Warping, George Wolberg, 1990.
 *   Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7.
 *
 * The downsampling algorithm used here is a simple average of the source
 * pixels covered by the output pixel.  The hi-falutin sampling literature
 * refers to this as a "box filter".  In general the characteristics of a box
 * filter are not very good, but for the specific cases we normally use (1:1
 * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not
 * nearly so bad.  If you intend to use other sampling ratios, you'd be well
 * advised to improve this code.
 *
 * A simple input-smoothing capability is provided.  This is mainly intended
 * for cleaning up color-dithered GIF input files (if you find it inadequate,
 * we suggest using an external filtering program such as pnmconvol).  When
 * enabled, each input pixel P is replaced by a weighted sum of itself and its
 * eight neighbors.  P's weight is 1-8*SF and each neighbor's weight is SF,
 * where SF = (smoothing_factor / 1024).
 * Currently, smoothing is only supported for 2h2v sampling factors.
 */

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"


/* Pointer to routine to downsample a single component */
typedef JMETHOD ( void, downsample1_ptr,
                 ( j_compress_ptr cinfo, jpeg_component_info * compptr,
                   JSAMPARRAY input_data, JSAMPARRAY output_data ) );

/* Private subobject */

typedef struct {
    struct jpeg_downsampler pub;/* public fields */

    /* Downsampling method pointers, one per component */
    downsample1_ptr methods[MAX_COMPONENTS];
} my_downsampler;

typedef my_downsampler * my_downsample_ptr;


/*
 * Initialize for a downsampling pass.
 */

METHODDEF void
start_pass_downsample( j_compress_ptr cinfo ) {
    /* no work for now */
}


/*
 * Expand a component horizontally from width input_cols to width output_cols,
 * by duplicating the rightmost samples.
 */

LOCAL void
expand_right_edge( JSAMPARRAY image_data, int num_rows,
                   JDIMENSION input_cols, JDIMENSION output_cols ) {
    register JSAMPROW ptr;
    register JSAMPLE pixval;
    register int count;
    int row;
    int numcols = (int) ( output_cols - input_cols );

    if ( numcols > 0 ) {
        for ( row = 0; row < num_rows; row++ ) {
            ptr = image_data[row] + input_cols;
            pixval = ptr[-1];/* don't need GETJSAMPLE() here */
            for ( count = numcols; count > 0; count-- ) {
                *ptr++ = pixval;
            }
        }
    }
}


/*
 * Do downsampling for a whole row group (all components).
 *
 * In this version we simply downsample each component independently.
 */

METHODDEF void
sep_downsample( j_compress_ptr cinfo,
                JSAMPIMAGE input_buf, JDIMENSION in_row_index,
                JSAMPIMAGE output_buf, JDIMENSION out_row_group_index ) {
    my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample;
    int ci;
    jpeg_component_info * compptr;
    JSAMPARRAY in_ptr, out_ptr;

    for ( ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
          ci++, compptr++ ) {
        in_ptr = input_buf[ci] + in_row_index;
        out_ptr = output_buf[ci] + ( out_row_group_index * compptr->v_samp_factor );
        ( *downsample->methods[ci] )( cinfo, compptr, in_ptr, out_ptr );
    }
}


/*
 * Downsample pixel values of a single component.
 * One row group is processed per call.
 * This version handles arbitrary integral sampling ratios, without smoothing.
 * Note that this version is not actually used for customary sampling ratios.
 */

METHODDEF void
int_downsample( j_compress_ptr cinfo, jpeg_component_info * compptr,
                JSAMPARRAY input_data, JSAMPARRAY output_data ) {
    int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v;
    JDIMENSION outcol, outcol_h;/* outcol_h == outcol*h_expand */
    JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
    JSAMPROW inptr, outptr;
    INT32 outvalue;

    h_expand = cinfo->max_h_samp_factor / compptr->h_samp_factor;
    v_expand = cinfo->max_v_samp_factor / compptr->v_samp_factor;
    numpix = h_expand * v_expand;
    numpix2 = numpix / 2;

    /* Expand input data enough to let all the output samples be generated
     * by the standard loop.  Special-casing padded output would be more
     * efficient.
     */
    expand_right_edge( input_data, cinfo->max_v_samp_factor,
                       cinfo->image_width, output_cols * h_expand );

    inrow = 0;
    for ( outrow = 0; outrow < compptr->v_samp_factor; outrow++ ) {
        outptr = output_data[outrow];
        for ( outcol = 0, outcol_h = 0; outcol < output_cols;
              outcol++, outcol_h += h_expand ) {
            outvalue = 0;
            for ( v = 0; v < v_expand; v++ ) {
                inptr = input_data[inrow + v] + outcol_h;
                for ( h = 0; h < h_expand; h++ ) {
                    outvalue += (INT32) GETJSAMPLE( *inptr++ );
                }
            }
            *outptr++ = (JSAMPLE) ( ( outvalue + numpix2 ) / numpix );
        }
        inrow += v_expand;
    }
}


/*
 * Downsample pixel values of a single component.
 * This version handles the special case of a full-size component,
 * without smoothing.
 */

METHODDEF void
fullsize_downsample( j_compress_ptr cinfo, jpeg_component_info * compptr,
                     JSAMPARRAY input_data, JSAMPARRAY output_data ) {
    /* Copy the data */
    jcopy_sample_rows( input_data, 0, output_data, 0,
                       cinfo->max_v_samp_factor, cinfo->image_width );
    /* Edge-expand */
    expand_right_edge( output_data, cinfo->max_v_samp_factor,
                       cinfo->image_width, compptr->width_in_blocks * DCTSIZE );
}


/*
 * Downsample pixel values of a single component.
 * This version handles the common case of 2:1 horizontal and 1:1 vertical,
 * without smoothing.
 *
 * A note about the "bias" calculations: when rounding fractional values to
 * integer, we do not want to always round 0.5 up to the next integer.
 * If we did that, we'd introduce a noticeable bias towards larger values.
 * Instead, this code is arranged so that 0.5 will be rounded up or down at
 * alternate pixel locations (a simple ordered dither pattern).
 */

METHODDEF void
h2v1_downsample( j_compress_ptr cinfo, jpeg_component_info * compptr,
                 JSAMPARRAY input_data, JSAMPARRAY output_data ) {
    int outrow;
    JDIMENSION outcol;
    JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
    register JSAMPROW inptr, outptr;
    register int bias;

    /* Expand input data enough to let all the output samples be generated
     * by the standard loop.  Special-casing padded output would be more
     * efficient.
     */
    expand_right_edge( input_data, cinfo->max_v_samp_factor,
                       cinfo->image_width, output_cols * 2 );

    for ( outrow = 0; outrow < compptr->v_samp_factor; outrow++ ) {
        outptr = output_data[outrow];
        inptr = input_data[outrow];
        bias = 0;       /* bias = 0,1,0,1,... for successive samples */
        for ( outcol = 0; outcol < output_cols; outcol++ ) {
            *outptr++ = (JSAMPLE) ( ( GETJSAMPLE( *inptr ) + GETJSAMPLE( inptr[1] )
                                      + bias ) >> 1 );
            bias ^= 1;  /* 0=>1, 1=>0 */
            inptr += 2;
        }
    }
}


/*
 * Downsample pixel values of a single component.
 * This version handles the standard case of 2:1 horizontal and 2:1 vertical,
 * without smoothing.
 */

METHODDEF void
h2v2_downsample( j_compress_ptr cinfo, jpeg_component_info * compptr,
                 JSAMPARRAY input_data, JSAMPARRAY output_data ) {
    int inrow, outrow;
    JDIMENSION outcol;
    JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
    register JSAMPROW inptr0, inptr1, outptr;
    register int bias;

    /* Expand input data enough to let all the output samples be generated
     * by the standard loop.  Special-casing padded output would be more
     * efficient.
     */
    expand_right_edge( input_data, cinfo->max_v_samp_factor,
                       cinfo->image_width, output_cols * 2 );

    inrow = 0;
    for ( outrow = 0; outrow < compptr->v_samp_factor; outrow++ ) {
        outptr = output_data[outrow];
        inptr0 = input_data[inrow];
        inptr1 = input_data[inrow + 1];
        bias = 1;       /* bias = 1,2,1,2,... for successive samples */
        for ( outcol = 0; outcol < output_cols; outcol++ ) {
            *outptr++ = (JSAMPLE) ( ( GETJSAMPLE( *inptr0 ) + GETJSAMPLE( inptr0[1] ) +
                                      GETJSAMPLE( *inptr1 ) + GETJSAMPLE( inptr1[1] )
                                      + bias ) >> 2 );
            bias ^= 3;  /* 1=>2, 2=>1 */
            inptr0 += 2;
            inptr1 += 2;
        }
        inrow += 2;
    }
}


#ifdef INPUT_SMOOTHING_SUPPORTED

/*
 * Downsample pixel values of a single component.
 * This version handles the standard case of 2:1 horizontal and 2:1 vertical,
 * with smoothing.  One row of context is required.
 */

METHODDEF void
h2v2_smooth_downsample( j_compress_ptr cinfo, jpeg_component_info * compptr,
                        JSAMPARRAY input_data, JSAMPARRAY output_data ) {
    int inrow, outrow;
    JDIMENSION colctr;
    JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
    register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr;
    INT32 membersum, neighsum, memberscale, neighscale;

    /* Expand input data enough to let all the output samples be generated
     * by the standard loop.  Special-casing padded output would be more
     * efficient.
     */
    expand_right_edge( input_data - 1, cinfo->max_v_samp_factor + 2,
                       cinfo->image_width, output_cols * 2 );

    /* We don't bother to form the individual "smoothed" input pixel values;
     * we can directly compute the output which is the average of the four
     * smoothed values.  Each of the four member pixels contributes a fraction
     * (1-8*SF) to its own smoothed image and a fraction SF to each of the three
     * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final
     * output.  The four corner-adjacent neighbor pixels contribute a fraction
     * SF to just one smoothed pixel, or SF/4 to the final output; while the
     * eight edge-adjacent neighbors contribute SF to each of two smoothed
     * pixels, or SF/2 overall.  In order to use integer arithmetic, these
     * factors are scaled by 2^16 = 65536.
     * Also recall that SF = smoothing_factor / 1024.
     */

    memberscale = 16384 - cinfo->smoothing_factor * 80;/* scaled (1-5*SF)/4 */
    neighscale = cinfo->smoothing_factor * 16;/* scaled SF/4 */

    inrow = 0;
    for ( outrow = 0; outrow < compptr->v_samp_factor; outrow++ ) {
        outptr = output_data[outrow];
        inptr0 = input_data[inrow];
        inptr1 = input_data[inrow + 1];
        above_ptr = input_data[inrow - 1];
        below_ptr = input_data[inrow + 2];

        /* Special case for first column: pretend column -1 is same as column 0 */
        membersum = GETJSAMPLE( *inptr0 ) + GETJSAMPLE( inptr0[1] ) +
                    GETJSAMPLE( *inptr1 ) + GETJSAMPLE( inptr1[1] );
        neighsum = GETJSAMPLE( *above_ptr ) + GETJSAMPLE( above_ptr[1] ) +
                   GETJSAMPLE( *below_ptr ) + GETJSAMPLE( below_ptr[1] ) +
                   GETJSAMPLE( *inptr0 ) + GETJSAMPLE( inptr0[2] ) +
                   GETJSAMPLE( *inptr1 ) + GETJSAMPLE( inptr1[2] );
        neighsum += neighsum;
        neighsum += GETJSAMPLE( *above_ptr ) + GETJSAMPLE( above_ptr[2] ) +
                    GETJSAMPLE( *below_ptr ) + GETJSAMPLE( below_ptr[2] );
        membersum = membersum * memberscale + neighsum * neighscale;
        *outptr++ = (JSAMPLE) ( ( membersum + 32768 ) >> 16 );
        inptr0 += 2;
        inptr1 += 2;
        above_ptr += 2;
        below_ptr += 2;

        for ( colctr = output_cols - 2; colctr > 0; colctr-- ) {
            /* sum of pixels directly mapped to this output element */
            membersum = GETJSAMPLE( *inptr0 ) + GETJSAMPLE( inptr0[1] ) +
                        GETJSAMPLE( *inptr1 ) + GETJSAMPLE( inptr1[1] );
            /* sum of edge-neighbor pixels */
            neighsum = GETJSAMPLE( *above_ptr ) + GETJSAMPLE( above_ptr[1] ) +
                       GETJSAMPLE( *below_ptr ) + GETJSAMPLE( below_ptr[1] ) +
                       GETJSAMPLE( inptr0[-1] ) + GETJSAMPLE( inptr0[2] ) +
                       GETJSAMPLE( inptr1[-1] ) + GETJSAMPLE( inptr1[2] );
            /* The edge-neighbors count twice as much as corner-neighbors */
            neighsum += neighsum;
            /* Add in the corner-neighbors */
            neighsum += GETJSAMPLE( above_ptr[-1] ) + GETJSAMPLE( above_ptr[2] ) +
                        GETJSAMPLE( below_ptr[-1] ) + GETJSAMPLE( below_ptr[2] );
            /* form final output scaled up by 2^16 */
            membersum = membersum * memberscale + neighsum * neighscale;
            /* round, descale and output it */
            *outptr++ = (JSAMPLE) ( ( membersum + 32768 ) >> 16 );
            inptr0 += 2;
            inptr1 += 2;
            above_ptr += 2;
            below_ptr += 2;
        }

        /* Special case for last column */
        membersum = GETJSAMPLE( *inptr0 ) + GETJSAMPLE( inptr0[1] ) +
                    GETJSAMPLE( *inptr1 ) + GETJSAMPLE( inptr1[1] );
        neighsum = GETJSAMPLE( *above_ptr ) + GETJSAMPLE( above_ptr[1] ) +
                   GETJSAMPLE( *below_ptr ) + GETJSAMPLE( below_ptr[1] ) +
                   GETJSAMPLE( inptr0[-1] ) + GETJSAMPLE( inptr0[1] ) +
                   GETJSAMPLE( inptr1[-1] ) + GETJSAMPLE( inptr1[1] );
        neighsum += neighsum;
        neighsum += GETJSAMPLE( above_ptr[-1] ) + GETJSAMPLE( above_ptr[1] ) +
                    GETJSAMPLE( below_ptr[-1] ) + GETJSAMPLE( below_ptr[1] );
        membersum = membersum * memberscale + neighsum * neighscale;
        *outptr = (JSAMPLE) ( ( membersum + 32768 ) >> 16 );

        inrow += 2;
    }
}


/*
 * Downsample pixel values of a single component.
 * This version handles the special case of a full-size component,
 * with smoothing.  One row of context is required.
 */

METHODDEF void
fullsize_smooth_downsample( j_compress_ptr cinfo, jpeg_component_info * compptr,
                            JSAMPARRAY input_data, JSAMPARRAY output_data ) {
    int outrow;
    JDIMENSION colctr;
    JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
    register JSAMPROW inptr, above_ptr, below_ptr, outptr;
    INT32 membersum, neighsum, memberscale, neighscale;
    int colsum, lastcolsum, nextcolsum;

    /* Expand input data enough to let all the output samples be generated
     * by the standard loop.  Special-casing padded output would be more
     * efficient.
     */
    expand_right_edge( input_data - 1, cinfo->max_v_samp_factor + 2,
                       cinfo->image_width, output_cols );

    /* Each of the eight neighbor pixels contributes a fraction SF to the
     * smoothed pixel, while the main pixel contributes (1-8*SF).  In order
     * to use integer arithmetic, these factors are multiplied by 2^16 = 65536.
     * Also recall that SF = smoothing_factor / 1024.
     */

    memberscale = 65536L - cinfo->smoothing_factor * 512L;/* scaled 1-8*SF */
    neighscale = cinfo->smoothing_factor * 64;/* scaled SF */

    for ( outrow = 0; outrow < compptr->v_samp_factor; outrow++ ) {
        outptr = output_data[outrow];
        inptr = input_data[outrow];
        above_ptr = input_data[outrow - 1];
        below_ptr = input_data[outrow + 1];

        /* Special case for first column */
        colsum = GETJSAMPLE( *above_ptr++ ) + GETJSAMPLE( *below_ptr++ ) +
                 GETJSAMPLE( *inptr );
        membersum = GETJSAMPLE( *inptr++ );
        nextcolsum = GETJSAMPLE( *above_ptr ) + GETJSAMPLE( *below_ptr ) +
                     GETJSAMPLE( *inptr );
        neighsum = colsum + ( colsum - membersum ) + nextcolsum;
        membersum = membersum * memberscale + neighsum * neighscale;
        *outptr++ = (JSAMPLE) ( ( membersum + 32768 ) >> 16 );
        lastcolsum = colsum;
        colsum = nextcolsum;

        for ( colctr = output_cols - 2; colctr > 0; colctr-- ) {
            membersum = GETJSAMPLE( *inptr++ );
            above_ptr++;
            below_ptr++;
            nextcolsum = GETJSAMPLE( *above_ptr ) + GETJSAMPLE( *below_ptr ) +
                         GETJSAMPLE( *inptr );
            neighsum = lastcolsum + ( colsum - membersum ) + nextcolsum;
            membersum = membersum * memberscale + neighsum * neighscale;
            *outptr++ = (JSAMPLE) ( ( membersum + 32768 ) >> 16 );
            lastcolsum = colsum;
            colsum = nextcolsum;
        }

        /* Special case for last column */
        membersum = GETJSAMPLE( *inptr );
        neighsum = lastcolsum + ( colsum - membersum ) + colsum;
        membersum = membersum * memberscale + neighsum * neighscale;
        *outptr = (JSAMPLE) ( ( membersum + 32768 ) >> 16 );

    }
}

#endif /* INPUT_SMOOTHING_SUPPORTED */


/*
 * Module initialization routine for downsampling.
 * Note that we must select a routine for each component.
 */

GLOBAL void
jinit_downsampler( j_compress_ptr cinfo ) {
    my_downsample_ptr downsample;
    int ci;
    jpeg_component_info * compptr;
    boolean smoothok = TRUE;

    downsample = (my_downsample_ptr)
                 ( *cinfo->mem->alloc_small )( (j_common_ptr) cinfo, JPOOL_IMAGE,
                                              SIZEOF( my_downsampler ) );
    cinfo->downsample = (struct jpeg_downsampler *) downsample;
    downsample->pub.start_pass = start_pass_downsample;
    downsample->pub.downsample = sep_downsample;
    downsample->pub.need_context_rows = FALSE;

    if ( cinfo->CCIR601_sampling ) {
        ERREXIT( cinfo, JERR_CCIR601_NOTIMPL );
    }

    /* Verify we can handle the sampling factors, and set up method pointers */
    for ( ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
          ci++, compptr++ ) {
        if ( ( compptr->h_samp_factor == cinfo->max_h_samp_factor ) &&
            ( compptr->v_samp_factor == cinfo->max_v_samp_factor ) ) {
#ifdef INPUT_SMOOTHING_SUPPORTED
            if ( cinfo->smoothing_factor ) {
                downsample->methods[ci] = fullsize_smooth_downsample;
                downsample->pub.need_context_rows = TRUE;
            } else
#endif
            downsample->methods[ci] = fullsize_downsample;
        } else if ( compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
                    compptr->v_samp_factor == cinfo->max_v_samp_factor ) {
            smoothok = FALSE;
            downsample->methods[ci] = h2v1_downsample;
        } else if ( compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
                    compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor ) {
#ifdef INPUT_SMOOTHING_SUPPORTED
            if ( cinfo->smoothing_factor ) {
                downsample->methods[ci] = h2v2_smooth_downsample;
                downsample->pub.need_context_rows = TRUE;
            } else
#endif
            downsample->methods[ci] = h2v2_downsample;
        } else if ( ( cinfo->max_h_samp_factor % compptr->h_samp_factor ) == 0 &&
                   ( cinfo->max_v_samp_factor % compptr->v_samp_factor ) == 0 ) {
            smoothok = FALSE;
            downsample->methods[ci] = int_downsample;
        } else {
            ERREXIT( cinfo, JERR_FRACT_SAMPLE_NOTIMPL );
        }
    }

#ifdef INPUT_SMOOTHING_SUPPORTED
    if ( ( cinfo->smoothing_factor ) && ( !smoothok ) ) {
        TRACEMS( cinfo, 0, JTRC_SMOOTH_NOTIMPL );
    }
#endif
}