fte/fteqw
2
0
Fork 1
Code Issues Pull requests Projects Releases Packages Wiki Activity
fteqw/engine/gl/gl_hlmdl.c
Spoike 5172823341 code to use occlusion queries for coronas. 
tweaked cl_maxfps a little. now sticks much closer to the desired rate. also tweaked cl_netfps. clamps 77fps to 13ms frames (read: 76.9 fps) in an attempt to avoid tripping up any framerate checks (we had previously been using a lower net rate with occasional 14ms frames).
viewspace particles are now a thing.
greater control over spawning particles. its now possible to spawn particles only in slime, etc.
fix soundlength builtin.
preliminary version of r_dynamic -1, which can give some significant framerate boosts on certain maps.
fix halflife bsp texture issues.
rewrote worker thread logic. workers now work as a single pool, instead of independent pools. this means that you don't have to wait for a specific thread to finish before it can load new stuff, reducing overall load times some more. worker_count cvar allows reconfiguring the number of active workers. can be changed any time.
updated mod_terrain_create command. should be more useful now and make more sense when first loaded.
fix lit support. apparently its been broken for a while.
brush editor now has csg subtraction.

git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@4990 fc73d0e0-1445-4013-8a0c-d673dee63da5
2015-10-11 11:34:58 +00:00

795 lines
24 KiB
C
Raw Blame History

#include "quakedef.h"
#ifdef HALFLIFEMODELS
#include "shader.h"
/*
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Half-Life Model Renderer (Experimental) Copyright (C) 2001 James 'Ender' Brown [ender@quakesrc.org] This program is
free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
details. You should have received a copy of the GNU General Public License along with this program; if not, write
to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. fromquake.h -
render.c - apart from calculations (mostly range checking or value conversion code is a mix of standard Quake 1
meshing, and vertex deforms. The rendering loop uses standard Quake 1 drawing, after SetupBones deforms the vertex.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Also, please note that it won't do all hl models....
Nor will it work 100%
*/
#include "model_hl.h"
void QuaternionGLMatrix(float x, float y, float z, float w, vec4_t *GLM)
{
GLM[0][0] = 1 - 2 * y * y - 2 * z * z;
GLM[1][0] = 2 * x * y + 2 * w * z;
GLM[2][0] = 2 * x * z - 2 * w * y;
GLM[0][1] = 2 * x * y - 2 * w * z;
GLM[1][1] = 1 - 2 * x * x - 2 * z * z;
GLM[2][1] = 2 * y * z + 2 * w * x;
GLM[0][2] = 2 * x * z + 2 * w * y;
GLM[1][2] = 2 * y * z - 2 * w * x;
GLM[2][2] = 1 - 2 * x * x - 2 * y * y;
}
/*
=======================================================================================================================
QuaternionGLAngle - Convert a GL angle to a quaternion matrix
=======================================================================================================================
*/
void QuaternionGLAngle(const vec3_t angles, vec4_t quaternion)
{
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
float yaw = angles[2] * 0.5;
float pitch = angles[1] * 0.5;
float roll = angles[0] * 0.5;
float siny = sin(yaw);
float cosy = cos(yaw);
float sinp = sin(pitch);
float cosp = cos(pitch);
float sinr = sin(roll);
float cosr = cos(roll);
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
quaternion[0] = sinr * cosp * cosy - cosr * sinp * siny;
quaternion[1] = cosr * sinp * cosy + sinr * cosp * siny;
quaternion[2] = cosr * cosp * siny - sinr * sinp * cosy;
quaternion[3] = cosr * cosp * cosy + sinr * sinp * siny;
}
matrix3x4 transform_matrix[MAX_BONES]; /* Vertex transformation matrix */
void GL_Draw_HL_AliasFrame(short *order, vec3_t *transformed, float tex_w, float tex_h);
/*
=======================================================================================================================
Mod_LoadHLModel - read in the model's constituent parts
=======================================================================================================================
*/
qboolean QDECL Mod_LoadHLModel (model_t *mod, void *buffer, size_t fsize)
{
/*~~*/
int i;
hlmodelcache_t *model;
hlmdl_header_t *header;
hlmdl_header_t *texheader;
hlmdl_tex_t *tex;
hlmdl_bone_t *bones;
hlmdl_bonecontroller_t *bonectls;
struct hlmodelshaders_s *shaders;
void *texmem = NULL;
/*~~*/
//load the model into hunk
model = ZG_Malloc(&mod->memgroup, sizeof(hlmodelcache_t));
header = ZG_Malloc(&mod->memgroup, fsize);
memcpy(header, buffer, fsize);
#if defined(HLSERVER) && (defined(__powerpc__) || defined(__ppc__))
//this is to let bigfoot know when he comes to port it all... And I'm lazy.
#ifdef warningmsg
#pragma warningmsg("-----------------------------------------")
#pragma warningmsg("FIXME: No byteswapping on halflife models")
#pragma warningmsg("-----------------------------------------")
#endif
#endif
if (header->version != 10)
{
Con_Printf(CON_ERROR "Cannot load model %s - unknown version %i\n", mod->name, header->version);
return false;
}
if (header->numcontrollers > MAX_BONE_CONTROLLERS)
{
Con_Printf(CON_ERROR "Cannot load model %s - too many controllers %i\n", mod->name, header->numcontrollers);
return false;
}
if (header->numbones > MAX_BONES)
{
Con_Printf(CON_ERROR "Cannot load model %s - too many bones %i\n", mod->name, header->numbones);
return false;
}
texheader = NULL;
if (!header->numtextures)
{
size_t fz;
char texmodelname[MAX_QPATH];
COM_StripExtension(mod->name, texmodelname, sizeof(texmodelname));
Q_strncatz(texmodelname, "t.mdl", sizeof(texmodelname));
//no textures? eesh. They must be stored externally.
texheader = texmem = (hlmdl_header_t*)FS_LoadMallocFile(texmodelname, &fz);
if (texheader)
{
if (texheader->version != 10)
texheader = NULL;
}
}
if (!texheader)
texheader = header;
else
header->numtextures = texheader->numtextures;
tex = (hlmdl_tex_t *) ((qbyte *) texheader + texheader->textures);
bones = (hlmdl_bone_t *) ((qbyte *) header + header->boneindex);
bonectls = (hlmdl_bonecontroller_t *) ((qbyte *) header + header->controllerindex);
/* won't work - doesn't know exact sizes.
header = Hunk_Alloc(sizeof(hlmdl_header_t));
memcpy(header, (hlmdl_header_t *) buffer, sizeof(hlmdl_header_t));
tex = Hunk_Alloc(sizeof(hlmdl_tex_t)*header->numtextures);
memcpy(tex, (hlmdl_tex_t *) buffer, sizeof(hlmdl_tex_t)*header->numtextures);
bones = Hunk_Alloc(sizeof(hlmdl_bone_t)*header->numtextures);
memcpy(bones, (hlmdl_bone_t *) buffer, sizeof(hlmdl_bone_t)*header->numbones);
bonectls = Hunk_Alloc(sizeof(hlmdl_bonecontroller_t)*header->numcontrollers);
memcpy(bonectls, (hlmdl_bonecontroller_t *) buffer, sizeof(hlmdl_bonecontroller_t)*header->numcontrollers);
*/
model->header = header;
model->bones = bones;
model->bonectls = bonectls;
shaders = ZG_Malloc(&mod->memgroup, texheader->numtextures*sizeof(shader_t));
model->shaders = shaders;
for(i = 0; i < texheader->numtextures; i++)
{
Q_snprintfz(shaders[i].name, sizeof(shaders[i].name), "%s_%i.tga", mod->name, i);
memset(&shaders[i].defaulttex, 0, sizeof(shaders[i].defaulttex));
shaders[i].defaulttex.base = Image_GetTexture(shaders[i].name, "", IF_NOALPHA, (qbyte *) texheader + tex[i].offset, (qbyte *) texheader + tex[i].w * tex[i].h + tex[i].offset, tex[i].w, tex[i].h, TF_8PAL24);
shaders[i].w = tex[i].w;
shaders[i].h = tex[i].h;
}
model->numskins = texheader->numtextures;
model->skins = ZG_Malloc(&mod->memgroup, model->numskins*sizeof(*model->skins));
memcpy(model->skins, (short *) ((qbyte *) texheader + texheader->skins), model->numskins*sizeof(*model->skins));
if (texmem)
Z_Free(texmem);
mod->type = mod_halflife;
mod->meshinfo = model;
return true;
}
#ifdef HLSERVER
void *Mod_GetHalfLifeModelData(model_t *mod)
{
hlmodelcache_t *mc;
if (!mod || mod->type != mod_halflife)
return NULL; //halflife models only, please
mc = Mod_Extradata(mod);
return (void*)mc->header;
}
#endif
int HLMod_FrameForName(model_t *mod, const char *name)
{
int i;
hlmdl_header_t *h;
hlmdl_sequencelist_t *seqs;
hlmodelcache_t *mc;
if (!mod || mod->type != mod_halflife)
return -1; //halflife models only, please
mc = Mod_Extradata(mod);
h = mc->header;
seqs = (hlmdl_sequencelist_t*)((char*)h+h->seqindex);
for (i = 0; i < h->numseq; i++)
{
if (!strcmp(seqs[i].name, name))
return i;
}
return -1;
}
int HLMod_BoneForName(model_t *mod, char *name)
{
int i;
hlmdl_header_t *h;
hlmdl_bone_t *bones;
hlmodelcache_t *mc;
if (!mod || mod->type != mod_halflife)
return -1; //halflife models only, please
mc = Mod_Extradata(mod);
h = mc->header;
bones = (hlmdl_bone_t*)((char*)h+h->boneindex);
for (i = 0; i < h->numbones; i++)
{
if (!strcmp(bones[i].name, name))
return i+1;
}
return 0;
}
/*
=======================================================================================================================
HL_CalculateBones - calculate bone positions - quaternion+vector in one function
=======================================================================================================================
note, while ender may be proud of this function, it lacks the fact that interpolating eular angles is not as acurate as interpolating quaternions.
it is faster though.
*/
void HL_CalculateBones
(
int offset,
int frame1,
int frame2,
float lerpfrac,
vec4_t adjust,
hlmdl_bone_t *bone,
hlmdl_anim_t *animation,
float *destination
)
{
/*~~~~~~~~~~*/
int i;
vec3_t angle;
float lerpifrac = 1-lerpfrac;
/*~~~~~~~~~~*/
/* For each vector */
for(i = 0; i < 3; i++)
{
/*~~~~~~~~~~~~~~~*/
int o = i + offset; /* Take the value offset - allows quaternion & vector in one function */
/*~~~~~~~~~~~~~~~*/
angle[i] = bone->value[o]; /* Take the bone value */
if(animation->offset[o] != 0)
{
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
int tempframe;
hlmdl_animvalue_t *animvalue = (hlmdl_animvalue_t *) ((qbyte *) animation + animation->offset[o]);
short f1, f2;
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
/* find values including the required frame */
tempframe = frame1;
while(animvalue->num.total <= tempframe)
{
tempframe -= animvalue->num.total;
animvalue += animvalue->num.valid + 1;
}
f1 = animvalue[min(animvalue->num.valid-1, tempframe)+1].value;
/* frame2 is always higher than frame1, so keep searching for it, if its in a different block */
tempframe += frame2-frame1;
while(animvalue->num.total <= tempframe)
{
tempframe -= animvalue->num.total;
animvalue += animvalue->num.valid + 1;
}
f2 = animvalue[min(animvalue->num.valid-1, tempframe)+1].value;
angle[i] += (f1 * lerpifrac + lerpfrac * f2) * bone->scale[o];
}
if(bone->bonecontroller[o] != -1)
{ /* Add the programmable offset. */
angle[i] += adjust[bone->bonecontroller[o]];
}
}
if(offset < 3)
{
VectorCopy(angle, destination); /* Just a standard vector */
}
else
{
QuaternionGLAngle(angle, destination); /* A quaternion */
}
}
/*
=======================================================================================================================
HL_CalcBoneAdj - Calculate the adjustment values for the programmable controllers
=======================================================================================================================
*/
void HL_CalcBoneAdj(hlmodel_t *model)
{
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
int i;
float value;
hlmdl_bonecontroller_t *control = (hlmdl_bonecontroller_t *)
((qbyte *) model->header + model->header->controllerindex);
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
for(i = 0; i < model->header->numcontrollers; i++)
{
/*~~~~~~~~~~~~~~~~~~~~~*/
int j = control[i].index;
/*~~~~~~~~~~~~~~~~~~~~~*/
if(control[i].type & 0x8000)
{
value = model->controller[j] + control[i].start;
}
else
{
value = (model->controller[j]+1)*0.5; //shifted to give a valid range between -1 and 1, with 0 being mid-range.
if(value < 0)
value = 0;
else if(value > 1.0)
value = 1.0;
value = (1.0 - value) * control[i].start + value * control[i].end;
}
/* Rotational controllers need their values converted */
if(control[i].type >= 0x0008 && control[i].type <= 0x0020)
model->adjust[i] = M_PI * value / 180;
else
model->adjust[i] = value;
}
}
/*
=======================================================================================================================
HL_SetupBones - determine where vertex should be using bone movements
=======================================================================================================================
*/
void QuaternionSlerp( const vec4_t p, vec4_t q, float t, vec4_t qt );
void HL_SetupBones(hlmodel_t *model, int seqnum, int firstbone, int lastbone, float subblendfrac, float frametime)
{
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
int i;
float matrix[3][4];
static vec3_t positions[2];
static vec4_t quaternions[2], blended;
int frame1, frame2;
hlmdl_sequencelist_t *sequence = (hlmdl_sequencelist_t *) ((qbyte *) model->header + model->header->seqindex) +
((unsigned int)seqnum>=model->header->numseq?0:seqnum);
hlmdl_sequencedata_t *sequencedata = (hlmdl_sequencedata_t *)
((qbyte *) model->header + model->header->seqgroups) +
sequence->seqindex;
hlmdl_anim_t *animation;
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
if (sequencedata->name[32])
{
size_t fz;
if (sequence->seqindex >= MAX_ANIM_GROUPS)
{
Sys_Error("Too many animation sequence cache groups\n");
return;
}
if (!model->animcache[sequence->seqindex])
model->animcache[sequence->seqindex] = FS_LoadMallocGroupFile(model->memgroup, sequencedata->name+32, &fz);
if (!model->animcache[sequence->seqindex] || model->animcache[sequence->seqindex]->magic != *(int*)"IDSQ" || model->animcache[sequence->seqindex]->version != 10)
{
Sys_Error("Unable to load %s\n", sequencedata->name+32);
return;
}
animation = (hlmdl_anim_t *)((qbyte*)model->animcache[sequence->seqindex] + sequence->index);
}
else
animation = (hlmdl_anim_t *) ((qbyte *) model->header + sequencedata->data + sequence->index);
frametime *= sequence->timing;
if (frametime < 0)
frametime = 0;
frame1 = (int)frametime;
frametime -= frame1;
frame2 = frame1+1;
if (!sequence->numframes)
return;
if(frame1 >= sequence->numframes)
{
if (sequence->loop)
frame1 %= sequence->numframes;
else
frame1 = sequence->numframes-1;
}
if(frame2 >= sequence->numframes)
{
if (sequence->loop)
frame2 %= sequence->numframes;
else
frame2 = sequence->numframes-1;
}
if (frame2 < frame1)
{
i = frame2;
frame2 = frame1;
frame1 = i;
frametime = 1-frametime;
}
if (lastbone > model->header->numbones)
lastbone = model->header->numbones;
HL_CalcBoneAdj(model); /* Deal with programmable controllers */
/*FIXME:this is useless*/
/*
if(sequence->motiontype & 0x0001)
positions[sequence->motionbone][0] = 0.0;
if(sequence->motiontype & 0x0002)
positions[sequence->motionbone][1] = 0.0;
if(sequence->motiontype & 0x0004)
positions[sequence->motionbone][2] = 0.0;
*/
/*
this is hellish.
a hl model blends:
4 controllers (on a player, it seems each one of them twists a separate bone in the chest)
a mouth (not used on players)
its a sequence (to be smooth we need to blend between two frames in the sequence)
up to four source animations (ironically used to pitch up/down)
alternate sequence (walking+firing)
frame2 (quake expectations.)
this is madness, quite frankly.
luckily...
controllers and mouth control the entire thing. they should be interpolated outside, and have no affect on blending here
alternate sequences replace. we can just call this function twice (so long as bone ranges are incremental).
autoanimating sequence is handled inside HL_CalculateBones (sequences are weird and it has to be handled there anyway)
this means we only have sources and alternate frames left to cope with.
FIXME: we don't handle frame2.
*/
if (sequence->hasblendseq>1)
{
if (subblendfrac < 0)
subblendfrac = 0;
if (subblendfrac > 1)
subblendfrac = 1;
for(i = firstbone; i < lastbone; i++)
{
HL_CalculateBones(0, frame1, frame2, frametime, model->adjust, model->bones + i, animation + i, positions[0]);
HL_CalculateBones(3, frame1, frame2, frametime, model->adjust, model->bones + i, animation + i, quaternions[0]);
HL_CalculateBones(3, frame1, frame2, frametime, model->adjust, model->bones + i, animation + i + model->header->numbones, quaternions[1]);
QuaternionSlerp(quaternions[0], quaternions[1], subblendfrac, blended);
QuaternionGLMatrix(blended[0], blended[1], blended[2], blended[3], matrix);
matrix[0][3] = positions[0][0];
matrix[1][3] = positions[0][1];
matrix[2][3] = positions[0][2];
/* If we have a parent, take the addition. Otherwise just copy the values */
if(model->bones[i].parent>=0)
{
R_ConcatTransforms(transform_matrix[model->bones[i].parent], matrix, transform_matrix[i]);
}
else
{
memcpy(transform_matrix[i], matrix, 12 * sizeof(float));
}
}
}
else
{
for(i = firstbone; i < lastbone; i++)
{
/*
* There are two vector offsets in the structure. The first seems to be the
* positions of the bones, the second the quats of the bone matrix itself. We
* convert it inside the routine - Inconsistant, but hey.. so's the whole model
* format.
*/
HL_CalculateBones(0, frame1, frame2, frametime, model->adjust, model->bones + i, animation + i, positions[0]);
HL_CalculateBones(3, frame1, frame2, frametime, model->adjust, model->bones + i, animation + i, quaternions[0]);
QuaternionGLMatrix(quaternions[0][0], quaternions[0][1], quaternions[0][2], quaternions[0][3], matrix);
matrix[0][3] = positions[0][0];
matrix[1][3] = positions[0][1];
matrix[2][3] = positions[0][2];
/* If we have a parent, take the addition. Otherwise just copy the values */
if(model->bones[i].parent>=0)
{
R_ConcatTransforms(transform_matrix[model->bones[i].parent], matrix, transform_matrix[i]);
}
else
{
memcpy(transform_matrix[i], matrix, 12 * sizeof(float));
}
}
}
}
void R_HL_BuildFrame(hlmodel_t *model, hlmdl_model_t *amodel, entity_t *curent, short *order, float tex_s, float tex_t, mesh_t *mesh)
{
static vecV_t xyz[2048];
static vec3_t norm[2048];
static vec2_t st[2048];
static byte_vec4_t vc[2048];
static index_t index[4096];
int count;
int b;
int cbone;
int bgroup;
int lastbone;
int v, i;
vec3_t *verts;
qbyte *bone;
vec3_t transformed[2048];
int idx = 0;
int vert = 0;
mesh->xyz_array = xyz;
mesh->st_array = st;
mesh->normals_array = norm; //for lighting algos to not crash
mesh->snormals_array = norm; //for rtlighting
mesh->tnormals_array = norm; //for rtlighting
mesh->indexes = index;
mesh->colors4b_array = vc;
for (b = 0; b < MAX_BONE_CONTROLLERS; b++)
model->controller[b] = curent->framestate.bonecontrols[b];
// Con_Printf("%s %i\n", sequence->name, sequence->unknown1[0]);
cbone = 0;
for (bgroup = 0; bgroup < FS_COUNT; bgroup++)
{
lastbone = curent->framestate.g[bgroup].endbone;
if (bgroup == FS_COUNT-1)
lastbone = model->header->numbones;
if (cbone >= lastbone)
continue;
HL_SetupBones(model, curent->framestate.g[bgroup].frame[0], cbone, lastbone, (curent->framestate.g[bgroup].subblendfrac+1)*0.5, curent->framestate.g[bgroup].frametime[0]); /* Setup the bones */
cbone = lastbone;
}
verts = (vec3_t *) ((qbyte *) model->header + amodel->vertindex);
bone = ((qbyte *) model->header + amodel->vertinfoindex);
for(v = 0; v < amodel->numverts; v++)
{
VectorTransform(verts[v], (void *)transform_matrix[bone[v]], transformed[v]);
}
for(;;)
{
count = *order++; /* get the vertex count and primitive type */
if(!count) break; /* done */
if(count < 0)
{
count = -count;
//emit (count-2)*3 indicies as a fan
for (i = 0; i < count-2; i++)
{
index[idx++] = vert + 0;
index[idx++] = vert + i+1;
index[idx++] = vert + i+2;
}
}
else
{
//emit (count-2)*3 indicies as a strip
for (i = 0; ; )
{
if (i == count-2)
break;
index[idx++] = vert + i;
index[idx++] = vert + i+1;
index[idx++] = vert + i+2;
i++;
if (i == count-2)
break;
index[idx++] = vert + i;
index[idx++] = vert + i+2;
index[idx++] = vert + i+1;
i++;
}
}
do
{
VectorCopy(transformed[order[0]], xyz[vert]);
//FIXME: what's order[1]?
/* texture coordinates come from the draw list */
st[vert][0] = order[2] * tex_s;
st[vert][1] = order[3] * tex_t;
norm[vert][0] = 1;
norm[vert][1] = 1;
norm[vert][2] = 1;
vc[vert][0] = 255;
vc[vert][1] = 255;
vc[vert][2] = 255;
vc[vert][3] = 255;
order += 4;
vert++;
} while(--count);
}
mesh->numindexes = idx;
mesh->numvertexes = vert;
}
void R_HalfLife_WalkMeshes(entity_t *rent, batch_t *b, batch_t **batches);
void R_HL_BuildMesh(struct batch_s *b)
{
R_HalfLife_WalkMeshes(b->ent, b, NULL);
}
void R_HalfLife_WalkMeshes(entity_t *rent, batch_t *b, batch_t **batches)
{
hlmodelcache_t *modelc = Mod_Extradata(rent->model);
hlmodel_t model;
int body, m;
int batchid = 0;
static mesh_t bmesh, *mptr = &bmesh;
//general model
model.header = modelc->header;
model.bones = modelc->bones;
model.bonectls = modelc->bonectls;
model.shaders = modelc->shaders;
model.animcache = modelc->animcache;
model.memgroup = &rent->model->memgroup;
for (body = 0; body < model.header->numbodyparts; body++)
{
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
hlmdl_bodypart_t *bodypart = (hlmdl_bodypart_t *) ((qbyte *) model.header + model.header->bodypartindex) + body;
int bodyindex = (0 / bodypart->base) % bodypart->nummodels;
hlmdl_model_t *amodel = (hlmdl_model_t *) ((qbyte *) model.header + bodypart->modelindex) + bodyindex;
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
/* Draw each mesh */
for(m = 0; m < amodel->nummesh; m++)
{
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
hlmdl_mesh_t *mesh = (hlmdl_mesh_t *) ((qbyte *) model.header + amodel->meshindex) + m;
float tex_w;
float tex_h;
struct hlmodelshaders_s *s;
/*~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~*/
if (mesh->skinindex >= modelc->numskins)
continue;
s = &model.shaders[modelc->skins[mesh->skinindex]];
if (batches)
{
int sort, j;
b = BE_GetTempBatch();
if (!b)
return;
if (!s->shader)
{
s->shader = R_RegisterSkin(s->name, rent->model->name);
R_BuildDefaultTexnums(&s->defaulttex, s->shader);
}
b->buildmeshes = R_HL_BuildMesh;
b->ent = rent;
b->mesh = NULL;
b->firstmesh = 0;
b->meshes = 1;
b->skin = NULL;
b->texture = NULL;
b->shader = s->shader;
for (j = 0; j < MAXRLIGHTMAPS; j++)
b->lightmap[j] = -1;
b->surf_first = batchid;
b->flags = 0;
sort = b->shader->sort;
//fixme: we probably need to force some blend modes based on the surface flags.
if (rent->flags & RF_FORCECOLOURMOD)
b->flags |= BEF_FORCECOLOURMOD;
if (rent->flags & RF_ADDITIVE)
{
b->flags |= BEF_FORCEADDITIVE;
if (sort < SHADER_SORT_ADDITIVE)
sort = SHADER_SORT_ADDITIVE;
}
if (rent->flags & RF_TRANSLUCENT)
{
b->flags |= BEF_FORCETRANSPARENT;
if (SHADER_SORT_PORTAL < sort && sort < SHADER_SORT_BLEND)
sort = SHADER_SORT_BLEND;
}
if (rent->flags & RF_NODEPTHTEST)
{
b->flags |= BEF_FORCENODEPTH;
if (sort < SHADER_SORT_NEAREST)
sort = SHADER_SORT_NEAREST;
}
if (rent->flags & RF_NOSHADOW)
b->flags |= BEF_NOSHADOWS;
b->vbo = NULL;
b->next = batches[sort];
batches[sort] = b;
}
else
{
if (batchid == b->surf_first)
{
tex_w = 1.0f / s->w;
tex_h = 1.0f / s->h;
b->mesh = &mptr;
R_HL_BuildFrame(&model, amodel, b->ent, (short *) ((qbyte *) model.header + mesh->index), tex_w, tex_h, b->mesh[0]);
return;
}
}
batchid++;
}
}
}
qboolean R_CalcModelLighting(entity_t *e, model_t *clmodel);
void R_HalfLife_GenerateBatches(entity_t *e, batch_t **batches)
{
R_CalcModelLighting(e, e->model);
R_HalfLife_WalkMeshes(e, NULL, batches);
}
#endif
Reference in a new issue View git blame Copy permalink