eukara/fteqw
1
0
Fork 0
forked from fte/fteqw
Code Pull requests Activity
fteqw/engine/shaders/glsl/defaultwall.glsl
Spoike 2361c7d14f Flattened downloads menu. 
Added scrollbars to various menus (when they're too tall for the virtual screen height).
Added warnings when qc draws to the screen outside of where it'll actually be displayed (freecs is guilty of this).
r_showshaders will now work in q2.
mod_texturelist will include a small preview, because I can.
plug_list command will now also display some plugins which are not currently loaded.
q1bsp now properly respects hitcontents (note that normally only hull 0 actually has contents other than solid+empty).
q1bsp now correctly reports content values in tracelines (this fixes freecs being unable to detect func_water).
Rewrote netgraph code. Now displays using polygons instead of textures for higher resolution graphs.
Fixed texture bug that appears with nouveau's core contexts (texture unit switches were not happening).
Added some better support for disabling vsync with nouveau, although its still broken fullscreen for some reason.
Changed fteqcc's warning for unrecognised CRCs. Should be more descriptive about the usual cause (but less technical and potentially technically wrong).



git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@5378 fc73d0e0-1445-4013-8a0c-d673dee63da5
2019-01-13 16:51:50 +00:00

366 lines
11 KiB
GLSL
Raw Blame History

!!ver 100 450
!!permu TESS
!!permu DELUXE
!!permu FULLBRIGHT
!!permu FOG
!!permu LIGHTSTYLED
!!permu BUMP
!!permu SPECULAR
!!permu REFLECTCUBEMASK
!!cvarf r_glsl_offsetmapping_scale
!!cvardf r_tessellation_level=5
!!samps !EIGHTBIT diffuse specular normalmap fullbright reflectmask reflectcube
//diffuse gives us alpha, and prevents dlight from bugging out when there's no diffuse.
!!samps =EIGHTBIT paletted 1 specular diffuse
!!samps lightmap deluxemap
!!samps =LIGHTSTYLED lightmap1 lightmap2 lightmap3 deluxemap deluxemap1 deluxemap2 deluxemap3
#include "sys/defs.h"
//this is what normally draws all of your walls, even with rtlights disabled
//note that the '286' preset uses drawflat_walls instead.
#include "sys/fog.h"
#if !defined(TESS_CONTROL_SHADER)
#if defined(OFFSETMAPPING) || defined(SPECULAR) || defined(REFLECTCUBEMASK)
varying vec3 eyevector;
#endif
#if defined(REFLECTCUBEMASK) || defined(BUMPMODELSPACE)
varying mat3 invsurface;
#endif
varying vec2 tc;
#ifdef VERTEXLIT
varying vec4 vc;
#else
#ifdef LIGHTSTYLED
//we could use an offset, but that would still need to be per-surface which would break batches
//fixme: merge attributes?
varying vec2 lm0, lm1, lm2, lm3;
#else
varying vec2 lm0;
#endif
#endif
#endif
#ifdef VERTEX_SHADER
#ifdef TESS
varying vec3 vertex, normal;
#endif
void main ()
{
#if defined(OFFSETMAPPING) || defined(SPECULAR) || defined(REFLECTCUBEMASK)
vec3 eyeminusvertex = e_eyepos - v_position.xyz;
eyevector.x = dot(eyeminusvertex, v_svector.xyz);
eyevector.y = dot(eyeminusvertex, v_tvector.xyz);
eyevector.z = dot(eyeminusvertex, v_normal.xyz);
#endif
#if defined(REFLECTCUBEMASK) || defined(BUMPMODELSPACE)
invsurface[0] = v_svector;
invsurface[1] = v_tvector;
invsurface[2] = v_normal;
#endif
tc = v_texcoord;
#ifdef FLOW
tc.s += e_time * -0.5;
#endif
#ifdef VERTEXLIT
#ifdef LIGHTSTYLED
//FIXME, only one colour.
vc = v_colour * e_lmscale[0];
#else
vc = v_colour * e_lmscale;
#endif
#else
lm0 = v_lmcoord;
#ifdef LIGHTSTYLED
lm1 = v_lmcoord2;
lm2 = v_lmcoord3;
lm3 = v_lmcoord4;
#endif
#endif
gl_Position = ftetransform();
#ifdef TESS
vertex = v_position;
normal = v_normal;
#endif
}
#endif
#if defined(TESS_CONTROL_SHADER)
layout(vertices = 3) out;
in vec3 vertex[];
out vec3 t_vertex[];
in vec3 normal[];
out vec3 t_normal[];
#if defined(OFFSETMAPPING) || defined(SPECULAR) || defined(REFLECTCUBEMASK)
in vec3 eyevector[];
out vec3 t_eyevector[];
#endif
#ifdef REFLECTCUBEMASK
in mat3 invsurface[];
out mat3 t_invsurface[];
#endif
in vec2 tc[];
out vec2 t_tc[];
#ifdef VERTEXLIT
in vec4 vc[];
out vec4 t_vc[];
#else
in vec2 lm0[];
out vec2 t_lm0[];
#ifdef LIGHTSTYLED
in vec2 lm1[], lm2[], lm3[];
out vec2 t_lm1[], t_lm2[], t_lm3[];
#endif
#endif
void main()
{
//the control shader needs to pass stuff through
#define id gl_InvocationID
t_vertex[id] = vertex[id];
t_normal[id] = normal[id];
#ifdef REFLECTCUBEMASK
t_invsurface[id] = invsurface[id];
#endif
t_tc[id] = tc[id];
#ifdef VERTEXLIT
t_vc[id] = vc[id];
#else
t_lm0[id] = lm0[id];
#ifdef LIGHTSTYLED
t_lm1[id] = lm1[id];
t_lm2[id] = lm2[id];
t_lm3[id] = lm3[id];
#endif
#endif
#if defined(SPECULAR) || defined(OFFSETMAPPING) || defined(REFLECTCUBEMASK)
t_eyevector[id] = eyevector[id];
#endif
gl_TessLevelOuter[0] = float(r_tessellation_level);
gl_TessLevelOuter[1] = float(r_tessellation_level);
gl_TessLevelOuter[2] = float(r_tessellation_level);
gl_TessLevelInner[0] = float(r_tessellation_level);
}
#endif
#if defined(TESS_EVALUATION_SHADER)
layout(triangles) in;
in vec3 t_vertex[];
in vec3 t_normal[];
#if defined(OFFSETMAPPING) || defined(SPECULAR) || defined(REFLECTCUBEMASK)
in vec3 t_eyevector[];
#endif
#ifdef REFLECTCUBEMASK
in mat3 t_invsurface[];
#endif
in vec2 t_tc[];
#ifdef VERTEXLIT
in vec4 t_vc[];
#else
#ifdef LIGHTSTYLED
//we could use an offset, but that would still need to be per-surface which would break batches
//fixme: merge attributes?
in vec2 t_lm0[], t_lm1[], t_lm2[], t_lm3[];
#else
in vec2 t_lm0[];
#endif
#endif
#define LERP(a) (gl_TessCoord.x*a[0] + gl_TessCoord.y*a[1] + gl_TessCoord.z*a[2])
void main()
{
#define factor 1.0
tc = LERP(t_tc);
#ifdef VERTEXLIT
vc = LERP(t_vc);
#else
lm0 = LERP(t_lm0);
#ifdef LIGHTSTYLED
lm1 = LERP(t_lm1);
lm2 = LERP(t_lm2);
lm3 = LERP(t_lm3);
#endif
#endif
vec3 w = LERP(t_vertex);
vec3 t0 = w - dot(w-t_vertex[0],t_normal[0])*t_normal[0];
vec3 t1 = w - dot(w-t_vertex[1],t_normal[1])*t_normal[1];
vec3 t2 = w - dot(w-t_vertex[2],t_normal[2])*t_normal[2];
w = w*(1.0-factor) + factor*(gl_TessCoord.x*t0+gl_TessCoord.y*t1+gl_TessCoord.z*t2);
#if defined(PCF) || defined(SPOT) || defined(CUBE)
//for texture projections/shadowmapping on dlights
vtexprojcoord = (l_cubematrix*vec4(w.xyz, 1.0));
#endif
//FIXME: we should be recalcing these here, instead of just lerping them
#ifdef REFLECTCUBEMASK
invsurface = LERP(t_invsurface);
#endif
#if defined(SPECULAR) || defined(OFFSETMAPPING) || defined(REFLECTCUBEMASK)
eyevector = LERP(t_eyevector);
#endif
gl_Position = m_modelviewprojection * vec4(w,1.0);
}
#endif
#ifdef FRAGMENT_SHADER
#define s_colourmap s_t0
#ifdef OFFSETMAPPING
#include "sys/offsetmapping.h"
#endif
void main ()
{
//adjust texture coords for offsetmapping
#ifdef OFFSETMAPPING
vec2 tcoffsetmap = offsetmap(s_normalmap, tc, eyevector);
#define tc tcoffsetmap
#endif
#if defined(EIGHTBIT) && !defined(LIGHTSTYLED)
//optional: round the lightmap coords to ensure all pixels within a texel have different lighting values either. it just looks wrong otherwise.
//don't bother if its lightstyled, such cases will have unpredictable correlations anyway.
//FIXME: this rounding is likely not correct with respect to software rendering. oh well.
#if __VERSION__ >= 130
vec2 lmsize = vec2(textureSize(s_lightmap0, 0));
#else
#define lmsize vec2(128.0,2048.0)
#endif
#define texelstolightmap (16.0)
vec2 lmcoord0 = floor(lm0 * lmsize*texelstolightmap)/(lmsize*texelstolightmap);
#define lm0 lmcoord0
#endif
//yay, regular texture!
gl_FragColor = texture2D(s_diffuse, tc);
#if defined(BUMP) && (defined(DELUXE) || defined(SPECULAR) || defined(REFLECTCUBEMASK))
vec3 norm = normalize(texture2D(s_normalmap, tc).rgb - 0.5);
#elif defined(SPECULAR) || defined(DELUXE) || defined(REFLECTCUBEMASK)
vec3 norm = vec3(0, 0, 1); //specular lighting expects this to exist.
#endif
//modulate that by the lightmap(s) including deluxemap(s)
#ifdef VERTEXLIT
#ifdef LIGHTSTYLED
vec3 lightmaps = vc.rgb;
#else
vec3 lightmaps = vc.rgb;
#endif
#define deluxe vec3(0.0,0.0,1.0)
#else
#ifdef LIGHTSTYLED
#define deluxe vec3(0.0,0.0,1.0)
vec3 lightmaps;
#ifdef DELUXE
lightmaps = texture2D(s_lightmap0, lm0).rgb * e_lmscale[0].rgb * dot(norm, 2.0*texture2D(s_deluxemap0, lm0).rgb-0.5);
lightmaps += texture2D(s_lightmap1, lm1).rgb * e_lmscale[1].rgb * dot(norm, 2.0*texture2D(s_deluxemap1, lm1).rgb-0.5);
lightmaps += texture2D(s_lightmap2, lm2).rgb * e_lmscale[2].rgb * dot(norm, 2.0*texture2D(s_deluxemap2, lm2).rgb-0.5);
lightmaps += texture2D(s_lightmap3, lm3).rgb * e_lmscale[3].rgb * dot(norm, 2.0*texture2D(s_deluxemap3, lm3).rgb-0.5);
#else
lightmaps = texture2D(s_lightmap0, lm0).rgb * e_lmscale[0].rgb;
lightmaps += texture2D(s_lightmap1, lm1).rgb * e_lmscale[1].rgb;
lightmaps += texture2D(s_lightmap2, lm2).rgb * e_lmscale[2].rgb;
lightmaps += texture2D(s_lightmap3, lm3).rgb * e_lmscale[3].rgb;
#endif
#else
vec3 lightmaps = (texture2D(s_lightmap, lm0) * e_lmscale).rgb;
//modulate by the bumpmap dot light
#ifdef DELUXE
vec3 deluxe = (texture2D(s_deluxemap, lm0).rgb-0.5);
#ifdef BUMPMODELSPACE
deluxe = normalize(deluxe*invsurface);
#else
deluxe = normalize(deluxe);
lightmaps *= 2.0 / max(0.25, deluxe.z); //counter the darkening from deluxemaps
#endif
lightmaps *= dot(norm, deluxe);
#else
#define deluxe vec3(0.0,0.0,1.0)
#endif
#endif
#endif
//add in specular, if applicable.
#ifdef SPECULAR
vec4 specs = texture2D(s_specular, tc);
vec3 halfdir = normalize(normalize(eyevector) + deluxe); //this norm should be the deluxemap info instead
float spec = pow(max(dot(halfdir, norm), 0.0), FTE_SPECULAR_EXPONENT * specs.a);
spec *= FTE_SPECULAR_MULTIPLIER;
//NOTE: rtlights tend to have a *4 scaler here to over-emphasise the effect because it looks cool.
//As not all maps will have deluxemapping, and the double-cos from the light util makes everything far too dark anyway,
//we default to something that is not garish when the light value is directly infront of every single pixel.
//we can justify this difference due to the rtlight editor etc showing the *4.
gl_FragColor.rgb += spec * specs.rgb;
#endif
#ifdef REFLECTCUBEMASK
vec3 rtc = reflect(normalize(-eyevector), norm);
rtc = rtc.x*invsurface[0] + rtc.y*invsurface[1] + rtc.z*invsurface[2];
rtc = (m_model * vec4(rtc.xyz,0.0)).xyz;
gl_FragColor.rgb += texture2D(s_reflectmask, tc).rgb * textureCube(s_reflectcube, rtc).rgb;
#endif
#ifdef EIGHTBIT //FIXME: with this extra flag, half the permutations are redundant.
lightmaps *= 0.5; //counter the fact that the colourmap contains overbright values and logically ranges from 0 to 2 intead of to 1.
float pal = texture2D(s_paletted, tc).r; //the palette index. hopefully not interpolated.
lightmaps -= 1.0 / 128.0; //software rendering appears to round down, so make sure we favour the lower values instead of rounding to the nearest
gl_FragColor.r = texture2D(s_colourmap, vec2(pal, 1.0-lightmaps.r)).r; //do 3 lookups. this is to cope with lit files, would be a waste to not support those.
gl_FragColor.g = texture2D(s_colourmap, vec2(pal, 1.0-lightmaps.g)).g; //its not very softwarey, but re-palettizing is ugly.
gl_FragColor.b = texture2D(s_colourmap, vec2(pal, 1.0-lightmaps.b)).b; //without lits, it should be identical.
#else
//now we have our diffuse+specular terms, modulate by lightmap values.
gl_FragColor.rgb *= lightmaps.rgb;
//add on the fullbright
#ifdef FULLBRIGHT
gl_FragColor.rgb += texture2D(s_fullbright, tc).rgb;
#endif
#endif
//entity modifiers
gl_FragColor = gl_FragColor * e_colourident;
#if defined(MASK)
#if defined(MASKLT)
if (gl_FragColor.a < MASK)
discard;
#else
if (gl_FragColor.a >= MASK)
discard;
#endif
gl_FragColor.a = 1.0; //alpha blending AND alpha testing usually looks stupid, plus it screws up our fog.
#endif
//and finally hide it all if we're fogged.
#ifdef FOG
gl_FragColor = fog4(gl_FragColor);
#endif
}
#endif
View git blame Copy permalink