cnq3/code/libjpeg-turbo/simd/jdmrgext-altivec.c
arQon fc9465caab switch from jpeg6 to jpeg-turbo
aside from the speed improvements, this also makes for nicer code
in the renderer interaction with libjpeg, thanks to mem_dest support etc
2017-01-03 00:34:59 -08:00

323 lines
12 KiB
C

/*
* AltiVec optimizations for libjpeg-turbo
*
* Copyright (C) 2015, D. R. Commander. All Rights Reserved.
*
* This software is provided 'as-is', without any express or implied
* warranty. In no event will the authors be held liable for any damages
* arising from the use of this software.
*
* Permission is granted to anyone to use this software for any purpose,
* including commercial applications, and to alter it and redistribute it
* freely, subject to the following restrictions:
*
* 1. The origin of this software must not be misrepresented; you must not
* claim that you wrote the original software. If you use this software
* in a product, an acknowledgment in the product documentation would be
* appreciated but is not required.
* 2. Altered source versions must be plainly marked as such, and must not be
* misrepresented as being the original software.
* 3. This notice may not be removed or altered from any source distribution.
*/
/* This file is included by jdmerge-altivec.c */
void jsimd_h2v1_merged_upsample_altivec (JDIMENSION output_width,
JSAMPIMAGE input_buf,
JDIMENSION in_row_group_ctr,
JSAMPARRAY output_buf)
{
JSAMPROW outptr, inptr0, inptr1, inptr2;
int pitch = output_width * RGB_PIXELSIZE, num_cols, yloop;
#if __BIG_ENDIAN__
int offset;
#endif
unsigned char __attribute__((aligned(16))) tmpbuf[RGB_PIXELSIZE * 16];
__vector unsigned char rgb0, rgb1, rgb2, rgbx0, rgbx1, rgbx2, rgbx3,
y, cb, cr;
#if __BIG_ENDIAN__
__vector unsigned char edgel, edgeh, edges, out0, out1, out2, out3;
#if RGB_PIXELSIZE == 4
__vector unsigned char out4;
#endif
#endif
#if RGB_PIXELSIZE == 4
__vector unsigned char rgb3;
#endif
__vector short rg0, rg1, rg2, rg3, bx0, bx1, bx2, bx3, ye, yo, cbl, cbh,
crl, crh, r_yl, r_yh, g_yl, g_yh, b_yl, b_yh, g_y0w, g_y1w, g_y2w, g_y3w,
rl, rh, gl, gh, bl, bh, re, ro, ge, go, be, bo;
__vector int g_y0, g_y1, g_y2, g_y3;
/* Constants
* NOTE: The >> 1 is to compensate for the fact that vec_madds() returns 17
* high-order bits, not 16.
*/
__vector short pw_f0402 = { __8X(F_0_402 >> 1) },
pw_mf0228 = { __8X(-F_0_228 >> 1) },
pw_mf0344_f0285 = { __4X2(-F_0_344, F_0_285) },
pw_one = { __8X(1) }, pw_255 = { __8X(255) },
pw_cj = { __8X(CENTERJSAMPLE) };
__vector int pd_onehalf = { __4X(ONE_HALF) };
__vector unsigned char pb_zero = { __16X(0) },
#if __BIG_ENDIAN__
shift_pack_index = {0,1,4,5,8,9,12,13,16,17,20,21,24,25,28,29},
even_index = {0,16,0,18,0,20,0,22,0,24,0,26,0,28,0,30},
odd_index = {0,17,0,19,0,21,0,23,0,25,0,27,0,29,0,31};
#else
shift_pack_index = {2,3,6,7,10,11,14,15,18,19,22,23,26,27,30,31},
even_index = {16,0,18,0,20,0,22,0,24,0,26,0,28,0,30,0},
odd_index = {17,0,19,0,21,0,23,0,25,0,27,0,29,0,31,0};
#endif
inptr0 = input_buf[0][in_row_group_ctr];
inptr1 = input_buf[1][in_row_group_ctr];
inptr2 = input_buf[2][in_row_group_ctr];
outptr = output_buf[0];
for (num_cols = pitch; num_cols > 0; inptr1 += 16, inptr2 += 16) {
cb = vec_ld(0, inptr1);
/* NOTE: We have to use vec_merge*() here because vec_unpack*() doesn't
* support unsigned vectors.
*/
cbl = (__vector signed short)VEC_UNPACKHU(cb);
cbh = (__vector signed short)VEC_UNPACKLU(cb);
cbl = vec_sub(cbl, pw_cj);
cbh = vec_sub(cbh, pw_cj);
cr = vec_ld(0, inptr2);
crl = (__vector signed short)VEC_UNPACKHU(cr);
crh = (__vector signed short)VEC_UNPACKLU(cr);
crl = vec_sub(crl, pw_cj);
crh = vec_sub(crh, pw_cj);
/* (Original)
* R = Y + 1.40200 * Cr
* G = Y - 0.34414 * Cb - 0.71414 * Cr
* B = Y + 1.77200 * Cb
*
* (This implementation)
* R = Y + 0.40200 * Cr + Cr
* G = Y - 0.34414 * Cb + 0.28586 * Cr - Cr
* B = Y - 0.22800 * Cb + Cb + Cb
*/
b_yl = vec_add(cbl, cbl);
b_yh = vec_add(cbh, cbh);
b_yl = vec_madds(b_yl, pw_mf0228, pw_one);
b_yh = vec_madds(b_yh, pw_mf0228, pw_one);
b_yl = vec_sra(b_yl, (__vector unsigned short)pw_one);
b_yh = vec_sra(b_yh, (__vector unsigned short)pw_one);
b_yl = vec_add(b_yl, cbl);
b_yh = vec_add(b_yh, cbh);
b_yl = vec_add(b_yl, cbl);
b_yh = vec_add(b_yh, cbh);
r_yl = vec_add(crl, crl);
r_yh = vec_add(crh, crh);
r_yl = vec_madds(r_yl, pw_f0402, pw_one);
r_yh = vec_madds(r_yh, pw_f0402, pw_one);
r_yl = vec_sra(r_yl, (__vector unsigned short)pw_one);
r_yh = vec_sra(r_yh, (__vector unsigned short)pw_one);
r_yl = vec_add(r_yl, crl);
r_yh = vec_add(r_yh, crh);
g_y0w = vec_mergeh(cbl, crl);
g_y1w = vec_mergel(cbl, crl);
g_y0 = vec_msums(g_y0w, pw_mf0344_f0285, pd_onehalf);
g_y1 = vec_msums(g_y1w, pw_mf0344_f0285, pd_onehalf);
g_y2w = vec_mergeh(cbh, crh);
g_y3w = vec_mergel(cbh, crh);
g_y2 = vec_msums(g_y2w, pw_mf0344_f0285, pd_onehalf);
g_y3 = vec_msums(g_y3w, pw_mf0344_f0285, pd_onehalf);
/* Clever way to avoid 4 shifts + 2 packs. This packs the high word from
* each dword into a new 16-bit vector, which is the equivalent of
* descaling the 32-bit results (right-shifting by 16 bits) and then
* packing them.
*/
g_yl = vec_perm((__vector short)g_y0, (__vector short)g_y1,
shift_pack_index);
g_yh = vec_perm((__vector short)g_y2, (__vector short)g_y3,
shift_pack_index);
g_yl = vec_sub(g_yl, crl);
g_yh = vec_sub(g_yh, crh);
for (yloop = 0; yloop < 2 && num_cols > 0; yloop++,
num_cols -= RGB_PIXELSIZE * 16,
outptr += RGB_PIXELSIZE * 16, inptr0 += 16) {
y = vec_ld(0, inptr0);
ye = (__vector signed short)vec_perm(pb_zero, y, even_index);
yo = (__vector signed short)vec_perm(pb_zero, y, odd_index);
if (yloop == 0) {
be = vec_add(b_yl, ye);
bo = vec_add(b_yl, yo);
re = vec_add(r_yl, ye);
ro = vec_add(r_yl, yo);
ge = vec_add(g_yl, ye);
go = vec_add(g_yl, yo);
} else {
be = vec_add(b_yh, ye);
bo = vec_add(b_yh, yo);
re = vec_add(r_yh, ye);
ro = vec_add(r_yh, yo);
ge = vec_add(g_yh, ye);
go = vec_add(g_yh, yo);
}
rl = vec_mergeh(re, ro);
rh = vec_mergel(re, ro);
gl = vec_mergeh(ge, go);
gh = vec_mergel(ge, go);
bl = vec_mergeh(be, bo);
bh = vec_mergel(be, bo);
rg0 = vec_mergeh(rl, gl);
bx0 = vec_mergeh(bl, pw_255);
rg1 = vec_mergel(rl, gl);
bx1 = vec_mergel(bl, pw_255);
rg2 = vec_mergeh(rh, gh);
bx2 = vec_mergeh(bh, pw_255);
rg3 = vec_mergel(rh, gh);
bx3 = vec_mergel(bh, pw_255);
rgbx0 = vec_packsu(rg0, bx0);
rgbx1 = vec_packsu(rg1, bx1);
rgbx2 = vec_packsu(rg2, bx2);
rgbx3 = vec_packsu(rg3, bx3);
#if RGB_PIXELSIZE == 3
/* rgbx0 = R0 G0 R1 G1 R2 G2 R3 G3 B0 X0 B1 X1 B2 X2 B3 X3
* rgbx1 = R4 G4 R5 G5 R6 G6 R7 G7 B4 X4 B5 X5 B6 X6 B7 X7
* rgbx2 = R8 G8 R9 G9 Ra Ga Rb Gb B8 X8 B9 X9 Ba Xa Bb Xb
* rgbx3 = Rc Gc Rd Gd Re Ge Rf Gf Bc Xc Bd Xd Be Xe Bf Xf
*
* rgb0 = R0 G0 B0 R1 G1 B1 R2 G2 B2 R3 G3 B3 R4 G4 B4 R5
* rgb1 = G5 B5 R6 G6 B6 R7 G7 B7 R8 G8 B8 R9 G9 B9 Ra Ga
* rgb2 = Ba Rb Gb Bb Rc Gc Bc Rd Gd Bd Re Ge Be Rf Gf Bf
*/
rgb0 = vec_perm(rgbx0, rgbx1, (__vector unsigned char)RGB_INDEX0);
rgb1 = vec_perm(rgbx1, rgbx2, (__vector unsigned char)RGB_INDEX1);
rgb2 = vec_perm(rgbx2, rgbx3, (__vector unsigned char)RGB_INDEX2);
#else
/* rgbx0 = R0 G0 R1 G1 R2 G2 R3 G3 B0 X0 B1 X1 B2 X2 B3 X3
* rgbx1 = R4 G4 R5 G5 R6 G6 R7 G7 B4 X4 B5 X5 B6 X6 B7 X7
* rgbx2 = R8 G8 R9 G9 Ra Ga Rb Gb B8 X8 B9 X9 Ba Xa Bb Xb
* rgbx3 = Rc Gc Rd Gd Re Ge Rf Gf Bc Xc Bd Xd Be Xe Bf Xf
*
* rgb0 = R0 G0 B0 X0 R1 G1 B1 X1 R2 G2 B2 X2 R3 G3 B3 X3
* rgb1 = R4 G4 B4 X4 R5 G5 B5 X5 R6 G6 B6 X6 R7 G7 B7 X7
* rgb2 = R8 G8 B8 X8 R9 G9 B9 X9 Ra Ga Ba Xa Rb Gb Bb Xb
* rgb3 = Rc Gc Bc Xc Rd Gd Bd Xd Re Ge Be Xe Rf Gf Bf Xf
*/
rgb0 = vec_perm(rgbx0, rgbx0, (__vector unsigned char)RGB_INDEX);
rgb1 = vec_perm(rgbx1, rgbx1, (__vector unsigned char)RGB_INDEX);
rgb2 = vec_perm(rgbx2, rgbx2, (__vector unsigned char)RGB_INDEX);
rgb3 = vec_perm(rgbx3, rgbx3, (__vector unsigned char)RGB_INDEX);
#endif
#if __BIG_ENDIAN__
offset = (size_t)outptr & 15;
if (offset) {
__vector unsigned char unaligned_shift_index;
int bytes = num_cols + offset;
if (bytes < (RGB_PIXELSIZE + 1) * 16 && (bytes & 15)) {
/* Slow path to prevent buffer overwrite. Since there is no way to
* write a partial AltiVec register, overwrite would occur on the
* last chunk of the last image row if the right edge is not on a
* 16-byte boundary. It could also occur on other rows if the bytes
* per row is low enough. Since we can't determine whether we're on
* the last image row, we have to assume every row is the last.
*/
vec_st(rgb0, 0, tmpbuf);
vec_st(rgb1, 16, tmpbuf);
vec_st(rgb2, 32, tmpbuf);
#if RGB_PIXELSIZE == 4
vec_st(rgb3, 48, tmpbuf);
#endif
memcpy(outptr, tmpbuf, min(num_cols, RGB_PIXELSIZE * 16));
} else {
/* Fast path */
unaligned_shift_index = vec_lvsl(0, outptr);
edgel = vec_ld(0, outptr);
edgeh = vec_ld(min(num_cols - 1, RGB_PIXELSIZE * 16), outptr);
edges = vec_perm(edgeh, edgel, unaligned_shift_index);
unaligned_shift_index = vec_lvsr(0, outptr);
out0 = vec_perm(edges, rgb0, unaligned_shift_index);
out1 = vec_perm(rgb0, rgb1, unaligned_shift_index);
out2 = vec_perm(rgb1, rgb2, unaligned_shift_index);
#if RGB_PIXELSIZE == 4
out3 = vec_perm(rgb2, rgb3, unaligned_shift_index);
out4 = vec_perm(rgb3, edges, unaligned_shift_index);
#else
out3 = vec_perm(rgb2, edges, unaligned_shift_index);
#endif
vec_st(out0, 0, outptr);
if (bytes > 16)
vec_st(out1, 16, outptr);
if (bytes > 32)
vec_st(out2, 32, outptr);
if (bytes > 48)
vec_st(out3, 48, outptr);
#if RGB_PIXELSIZE == 4
if (bytes > 64)
vec_st(out4, 64, outptr);
#endif
}
} else {
#endif /* __BIG_ENDIAN__ */
if (num_cols < RGB_PIXELSIZE * 16 && (num_cols & 15)) {
/* Slow path */
VEC_ST(rgb0, 0, tmpbuf);
VEC_ST(rgb1, 16, tmpbuf);
VEC_ST(rgb2, 32, tmpbuf);
#if RGB_PIXELSIZE == 4
VEC_ST(rgb3, 48, tmpbuf);
#endif
memcpy(outptr, tmpbuf, min(num_cols, RGB_PIXELSIZE * 16));
} else {
/* Fast path */
VEC_ST(rgb0, 0, outptr);
if (num_cols > 16)
VEC_ST(rgb1, 16, outptr);
if (num_cols > 32)
VEC_ST(rgb2, 32, outptr);
#if RGB_PIXELSIZE == 4
if (num_cols > 48)
VEC_ST(rgb3, 48, outptr);
#endif
}
#if __BIG_ENDIAN__
}
#endif
}
}
}
void jsimd_h2v2_merged_upsample_altivec (JDIMENSION output_width,
JSAMPIMAGE input_buf,
JDIMENSION in_row_group_ctr,
JSAMPARRAY output_buf)
{
JSAMPROW inptr, outptr;
inptr = input_buf[0][in_row_group_ctr];
outptr = output_buf[0];
input_buf[0][in_row_group_ctr] = input_buf[0][in_row_group_ctr * 2];
jsimd_h2v1_merged_upsample_altivec(output_width, input_buf, in_row_group_ctr,
output_buf);
input_buf[0][in_row_group_ctr] = input_buf[0][in_row_group_ctr * 2 + 1];
output_buf[0] = output_buf[1];
jsimd_h2v1_merged_upsample_altivec(output_width, input_buf, in_row_group_ctr,
output_buf);
input_buf[0][in_row_group_ctr] = inptr;
output_buf[0] = outptr;
}