#pragma once

/*
** geometry.h
** basic geometry math routines
**
**---------------------------------------------------------------------------
** Copyright 2005-2022 Christoph Oelckers
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
**    notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
**    notice, this list of conditions and the following disclaimer in the
**    documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
**    derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
*/

#include "vectors.h"

inline DVector2 rotatepoint(const DVector2& pivot, const DVector2& point, DAngle angle)
{
	return (point - pivot).Rotated(angle) + pivot;
}

//==========================================================================
//
// 
//
//==========================================================================

inline double PointOnLineSide(double x, double y, double linex, double liney, double deltax, double deltay)
{
	return (x - linex) * deltay - (y - liney) * deltax;
}

//==========================================================================
//
// 
//
//==========================================================================

inline double SquareDist(double lx1, double ly1, double lx2, double ly2)
{
	double dx = lx2 - lx1;
	double dy = ly2 - ly1;
	return dx * dx + dy * dy;
}

// This is for cases where only the factor is needed, and pre-validation was performed.
inline double NearestPointOnLineFast(double px, double py, double lx1, double ly1, double lx2, double ly2)
{
	double wall_length = SquareDist(lx1, ly1, lx2, ly2);
	assert(wall_length > 0);
	return ((px - lx1) * (lx2 - lx1) + (py - ly1) * (ly2 - ly1)) / wall_length;
}


inline DVector2 NearestPointOnLine(double px, double py, double lx1, double ly1, double lx2, double ly2, bool clamp = true)
{
	double wall_length = SquareDist(lx1, ly1, lx2, ly2);

	if (wall_length == 0)
	{
		return { lx1, ly1 };
	}

	double t = ((px - lx1) * (lx2 - lx1) + (py - ly1) * (ly2 - ly1)) / wall_length;
	if (clamp)
	{
		if (t <= 0) return { lx1, ly1 };
		if (t >= 1) return { lx2, ly2 };
	}
	double xx = lx1 + t * (lx2 - lx1);
	double yy = ly1 + t * (ly2 - ly1);
	return { xx, yy };
}

//==========================================================================
//
// 
//
//==========================================================================

inline double SquareDistToLine(double px, double py, double lx1, double ly1, double lx2, double ly2)
{
	double wall_length = SquareDist(lx1, ly1, lx2, ly2);

	if (wall_length == 0) return SquareDist(px, py, lx1, ly1);

	double t = ((px - lx1) * (lx2 - lx1) + (py - ly1) * (ly2 - ly1)) / wall_length;
	t = clamp(t, 0., 1.);
	double xx = lx1 + t * (lx2 - lx1);
	double yy = ly1 + t * (ly2 - ly1);
	return SquareDist(px, py, xx, yy);
}

//==========================================================================
//
// taken from GZDoom with the divline_t parameters removed
//
//==========================================================================

inline double InterceptVector(double v2x, double v2y, double v2dx, double v2dy, double v1x, double v1y, double v1dx, double v1dy)
{
	double den = v1dy * v2dx - v1dx * v2dy;

	if (den == 0)
		return 0;		// parallel

	double num = (v1x - v2x) * v1dy + (v2y - v1y) * v1dx;
	return num / den;
}

//==========================================================================
//
// Essentially two InterceptVector calls. We can reduce the calculations 
// because the denominators for both calculations only differ by their sign.
//
//==========================================================================

inline double InterceptLineSegments(double v2x, double v2y, double v2dx, double v2dy, double v1x, double v1y, double v1dx, double v1dy, double* pfactor1 = nullptr, bool forcansee = false)
{
	double den = v1dy * v2dx - v1dx * v2dy;

	if (den == 0)
		return -2 * (double)FLT_MAX;		// parallel (return a magic value different from everything else, just in case it needs to be handled)

	if (forcansee && den < 0)  // cansee does this added check here, aside from that its logic is virtually the same.
		return -1;		// hitting the backside

	// perform the division first for better parallelization.
	den = 1 / den;

	double factor1 = ((v2x - v1x) * v2dy + (v1y - v2y) * v2dx) * -den;
	if (factor1 < 0 || factor1 >= 1) return -FLT_MAX; // no intersection
	if (pfactor1) *pfactor1 = factor1;

	return ((v1x - v2x) * v1dy + (v2y - v1y) * v1dx) * den; // this one's for the line segment where we want to get the intercept factor for so it needs to be last.
}

//==========================================================================
//
// calculates intersection between a plane and line in 3D
//
//==========================================================================

inline double LinePlaneIntersect(const DVector3& start, const DVector3& trace, const DVector3& ppoint, const DVector3& pvec1, const DVector3& pvec2)
{
	auto normal = pvec1 ^ pvec2; // we do not need a unit vector here.
	double dist = normal.dot(ppoint);
	double dotStart = normal.dot(start);
	double dotTrace = normal.dot(trace);
	if (dotTrace == 0) return -FLT_MAX;
	return (dist - dotStart) / dotTrace; // we are only interested in the factor
}

//==========================================================================
//
// BoxOnLineSide
//
// Based on Doom's, but rewritten to be standalone
// 
//==========================================================================

inline int BoxOnLineSide(const DVector2& boxtl, const DVector2& boxbr, const DVector2& start, const DVector2& delta)
{
	int p1;
	int p2;

	if (delta.X == 0)
	{
		p1 = boxbr.X < start.X;
		p2 = boxtl.X < start.X;
		if (delta.Y < 0)
		{
			p1 ^= 1;
			p2 ^= 1;
		}
	}
	else if (delta.Y == 0)
	{
		p1 = boxtl.Y > start.Y;
		p2 = boxbr.Y > start.Y;
		if (delta.X < 0)
		{
			p1 ^= 1;
			p2 ^= 1;
		}
	}
	else if (delta.X * delta.Y <= 0)
	{
		p1 = PointOnLineSide(boxtl.X, boxtl.Y, start.X, start.Y, delta.X, delta.Y) > 0;
		p2 = PointOnLineSide(boxbr.X, boxbr.Y, start.X, start.Y, delta.X, delta.Y) > 0;
	}
	else
	{
		p1 = PointOnLineSide(boxbr.X, boxtl.Y, start.X, start.Y, delta.X, delta.Y) > 0;
		p2 = PointOnLineSide(boxtl.X, boxbr.Y, start.X, start.Y, delta.X, delta.Y) > 0;
	}

	return (p1 == p2) ? p1 : -1;
}

//==========================================================================
//
// BoxInRange. Two variants becaise they cannot be that easily merged.
//
//==========================================================================

inline bool BoxInRange(const DVector2& boxtl, const DVector2& boxbr, const DVector2& start, const DVector2& end)
{
	return boxtl.X < max(start.X, end.X) &&
		boxbr.X > min(start.X, end.X) &&
		boxtl.Y < max(start.Y, end.Y) &&
		boxbr.Y > min(start.Y, end.Y);
}

inline bool BoxInRange2(const DVector2& boxtl, const DVector2& boxbr, const DVector2& start, const DVector2& end)
{
	return boxtl.X <= max(start.X, end.X) &&
		boxbr.X >= min(start.X, end.X) &&
		boxtl.Y <= max(start.Y, end.Y) &&
		boxbr.Y >= min(start.Y, end.Y);
}

//==========================================================================
//
// 
//
//==========================================================================

inline bool PointInRect(const DVector2& pt, const DVector2& min, const DVector2& max)
{
	return pt.X >= min.X && pt.X <= max.X && pt.Y >= min.Y && pt.Y <= max.Y;
}