When a map named <filename>.map is loaded (<filename> may also contain directory
separators), the engine checks for existence of <filename>_XX.art in the virtual
file system, where XX is a 0-padded number from 00 to 19. It loads a consecutive
sequence of these ART files, i.e. aborts whenever a number in the sequence isn't
found (in contrast to normal ART loading).
Restrictions:
- the per-map ART files must not reside in ZIP files
- if a tile number is attempted to be overridden that has a dummytile or is
cache1d-locked, per-map ART loading fails
On failure, the map is still loaded, but a diagnostic message is output to the
log/OSD.
Loaded per-map ART data are cleared whenever the map is "left". In particular:
- whenever another map is loaded
- in the editor: when a new map is started
- in the game: after the bonus ending screen of a finished level, after going
to the title screen via the menu
A final note: file names are supposed to be looked up and compared
case-sensitively. That is, <filename> must match EXACTLY between the map's and
per-map ART one; 'art' must be lowercase. Otherwise, the cookie monster will
come and eat you!
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4257 1a8010ca-5511-0410-912e-c29ae57300e0
DONT_BUILD, because there have been no significant changes of the non-Lua build.
git-svn-id: https://svn.eduke32.com/eduke32@4006 1a8010ca-5511-0410-912e-c29ae57300e0
- Use the proper tile sequence when multiple pskies are present in a map.
However, there's still only *one* psky chosen at map load time.
- Handle three horizfrac cases:
* 0, psky always at same level wrt screen
* 65536, psky horiz follows camera horiz (e.g. E4L9)
* otherwise, fall back to default hard-coded parallax implemented as an
angle fraction
git-svn-id: https://svn.eduke32.com/eduke32@3977 1a8010ca-5511-0410-912e-c29ae57300e0
- Rename sky_t members: yscale -> horizfrac, bits -> lognumtiles.
- Add default sky (8 tiles, horizfrac=32768 (i.e. 1/2 the scene horiz), offsets
all zero) and CLOUDYOCEAN sky (8 tiles, horizfrac=65536, offsets all zero)
to multipsky[].
- Get rid of "psky_t g_psky", merely maintaining a g_pskyidx instead. Set it up
at map load time so as to keep the behavior of the legacy per-map psky:
the last sector index with a matching psky ceiling wins.
- In mapstate_t, save g_pskyidx too, not (former) pskybits and pskyoffs[].
- Make on-map-load global psky setup consistent for the game and editor by
factoring it out into common.c: G_SetupGlobalPsky().
- Remove a couple of useless initializations, add some static assertions.
This commit is more likely to introduce subtle differences in behavior.
Specifically, getpsky() now always returns the default sky properties instead of
the global sky ones (but with all-zero offsets) when no match for a suiting
multi-psky is found. This is only likely to affect the yscale/horizfrac of
non-multi-pskies when a global non-default multi-psky has been set up.
Bump BYTEVERSION again.
git-svn-id: https://svn.eduke32.com/eduke32@3976 1a8010ca-5511-0410-912e-c29ae57300e0
- Consolidate psky* arrays into a "typedef struct psky_t" "g_psky" and
"multipsky[]".
- Factor out getting parallaxed sky properties into getpsky().
- Condense initial multi-psky setup by memcpy'ing from multipsky[].
- New function: MultiPsky_TileToIdx().
- Add new define PSKYOFF_MAX and related consistency-checking assertions.
- Lower MAXPSKYTILES to 8 to reflect current usage (was 256).
- Game: make multi-pskies consider dynamically-remapped MOONSKY1, BIGORBIT1
and LA. (Not very useful as the editor will still only act for the static
values -- 80, 84 and 89, respectively.)
An attempt has been made to preserve behavior even in strange cases, so this
commit is unlikely to introduce regressions. Because of point 6, BYTEVERSION
had to be bumped.
git-svn-id: https://svn.eduke32.com/eduke32@3975 1a8010ca-5511-0410-912e-c29ae57300e0
In the mirror reversing code, get rid of the padding. This may produce
seams, but they appear to be extremely transient and shouldn't be
noticeable.
In game.c, add a debugging compilation switch DEBUG_MIRRORS_ONLY.
git-svn-id: https://svn.eduke32.com/eduke32@3726 1a8010ca-5511-0410-912e-c29ae57300e0
- Return early from drawsprite_classic() if tspr->owner if oob.
Commonize that check between renderers into bad_tspr().
- Make the BIT() macro a left-shift of the *unsigned* number 1,
preventing expansion to (1<<31).
git-svn-id: https://svn.eduke32.com/eduke32@3717 1a8010ca-5511-0410-912e-c29ae57300e0
The size of that struct is currently 4, and its layout almost the same as
what is read in with loadpics(). The number of tiles in an animation is
bumped to 256, so that the max. tile difference in DEF's animtilerange is
255. (There's no way to have such animations from ART.)
git-svn-id: https://svn.eduke32.com/eduke32@3202 1a8010ca-5511-0410-912e-c29ae57300e0
Note the type change of vplce[] in engine.c: int32_t -> uint32_t.
git-svn-id: https://svn.eduke32.com/eduke32@3172 1a8010ca-5511-0410-912e-c29ae57300e0
This reverts r3159..r3161.
Conflicts:
eduke32/build/include/compat.h
(Handled so that r3163's changes are kept applied.)
git-svn-id: https://svn.eduke32.com/eduke32@3165 1a8010ca-5511-0410-912e-c29ae57300e0
I think there's also a fix for the CON precache system breakage in here (lost it in my local tree when I started getting the C++ build working in MSVC, sorry!)
git-svn-id: https://svn.eduke32.com/eduke32@3159 1a8010ca-5511-0410-912e-c29ae57300e0
Credit to Plagman for the idea and doing the work on the game side, which is included in this commit.
(Building as C++ will give us features with which we can make improvements and optimizations on the multiplayer code and Polymer.)
git-svn-id: https://svn.eduke32.com/eduke32@3116 1a8010ca-5511-0410-912e-c29ae57300e0
Don't call setaspect from them, because the only thing that's needed is
(in classic) yxaspect and xyaspect. Pass these from the helper function
defined earlier instead.
git-svn-id: https://svn.eduke32.com/eduke32@2921 1a8010ca-5511-0410-912e-c29ae57300e0
This means that classic and the GL modes now look the same as far as e.g.
hud_bgstretch or HUD weapons are concerned.
git-svn-id: https://svn.eduke32.com/eduke32@2911 1a8010ca-5511-0410-912e-c29ae57300e0
Also move a 'int16_t editstatus' declaration from polymost.c to engine_priv.h.
git-svn-id: https://svn.eduke32.com/eduke32@2066 1a8010ca-5511-0410-912e-c29ae57300e0
functionality, Polymost).
The new feature can be enabled/disabled with the 'r_tror_nomaskpass' cvar.
The basic idea is that when drawing lower or upper levels, a first pass
is performed that ignores all red walls for which the TROR nextwall link
'towards' the viewer arrives at a red wall. Thus, in the worst case, there
can be up to twice as many rendering passes now (when it is discovered that
the no-mask-pass isn't different that what would be drawn with the ordinary
one, the latter is skipped, since we've already drawn all needed geometry).
Hovever, this kind of multi-pass splitting is only suitable for simple scenes,
like the upper subway in the TROR test map. In particular, multiple islands
shouldn't 'see' each other.
Two issues are worth mentioning: first, care needs to be taken for translucent
ceilings or floors, since drawing them twice isn't the same as drawing them
once. This is done for classic, but not for Polymost. Second, sprites (which
are always drawn _after_ the geometry for a given pass) are still clipped to
the geometry of the ordinary pass, resulting in their disappearance from
certain angles.
--
Additionaly, a change made it into this commit that fixes redundant collection
of sprites in TROR:classic/Polymost.
git-svn-id: https://svn.eduke32.com/eduke32@2024 1a8010ca-5511-0410-912e-c29ae57300e0
dealing with sectors on the two sides of a bunch. Make yax_globallev and
yax_globalbunch variables non-static.
Rewrite a TROR-related bit in the engine code using the new function.
git-svn-id: https://svn.eduke32.com/eduke32@2018 1a8010ca-5511-0410-912e-c29ae57300e0
Usage: For an ANM file <somefile>.anm/ANM, EDuke32 looks for <somefile>.ivf, which is the VP8 stream transported by an IVF container. It can be extracted from a WebM file with e.g.
mkvextract tracks <filename>.webm 1:<filename>.ivf
(part of Mkvtoolnix, the Matroska toolset)
Libvpx is required, and the 'YUV'-->RGB conversion is implemented using a fragment shader, so it's for OpenGL modes only. Also, this commit doesn't enable the code.
Unfinished: sound, aspect correction for fullscreen w/ non-square pixels, ... ?
---
Make MAXNODESPERLINE in engine_priv.h actually a macro that depends on MAXYSAVES and MAXDIM instead of using the obsolete precomputed value. I think this might have been the cause for the latest patched-up overhead view crash.
git-svn-id: https://svn.eduke32.com/eduke32@1933 1a8010ca-5511-0410-912e-c29ae57300e0
* rudimentary TROR support
* free mixing of multi- and single-tile pskies
* Don't cull models behind you. That is, treat them like floor sprites in that respect. This way large models like corpses don't disappear from the view unexpectedly.
Classic:
* tweak the last row and column of the translucency table so that e.g. a transparent sprite against a FANSPRITE wall doesn't show up purple (only if Duke3D table is found)
Misc.:
* fixes TROR-nextwall corruption when deleting sectors
* tile selector 'goto' now has also completion
* I forgot a file for the non-OpenGL build last time
git-svn-id: https://svn.eduke32.com/eduke32@1892 1a8010ca-5511-0410-912e-c29ae57300e0
* support for free mixing of multi- and single-tile parallaxed skies in classic
* make visibility independent of yxaspect and viewingrange in OpenGL modes
-- editor:
* when dragging walls, restore pixel width after that (only for the left and right walls of pointhighlight, and its nextwalls, if any)
* pasting on walls and auto-aligning them now carries over a few more fields
-- fixes:
* visibility in OpenGL modes wasn't incremented gradually (regression due to making 'clamp' an inline function instead of a macro)
* memory corruption due to calling qlz_compress with less than the recommended surplus storage of 400 bytes
* decorative sprites in the mirror showing non-flipped
* make the subway SE message (much) more helpful by showing which sector the game considers to be the track sector
git-svn-id: https://svn.eduke32.com/eduke32@1882 1a8010ca-5511-0410-912e-c29ae57300e0
* Polymer light access to m32script (light[<lightidx>].<field>). As an application, provide a state 'insertlights' that takes the currently active lights and puts them into the map as SEs (e.g. for maphack recovery).
* Prototype of a mechanism to gray out certain portion of a map, making them inactive to various, but not all, editing operations. Highlighting a set of sectors and pressing Ctrl-R will make the Z bounds be [(least ceiling z), (greatest floor z)] of all selected ones, pressing Ctrl-R when no sectors are highlighted will reset them. Not sure if it's for production use at this stage...
* The 'align walls' feature [.] now has three independently toggleable behaviours: recurse nextwalls (toggled when Ctrl is pressed), iterate point2s (disabled when Shift is pressed), and also copy pixel width (toggled when Alt is pressed).
* Make shades clamp instead of overflowing in the editor
Fixes:
* crash when carrying out certain operations on walls with xrepeat 0
* the Pause key on linux. Also make demo recording start on Shift-ScrollLock because ScrollLock alone is too easily pressed when pausing
git-svn-id: https://svn.eduke32.com/eduke32@1877 1a8010ca-5511-0410-912e-c29ae57300e0
Engine stuff:
* Add 'r_shadescale_unbounded' cvar. When set to 0, OpenGL renderers should never
draw completely black objects (currently only implemented for Polymost)
Mapster32:
* Add 'r_shadescale' to config
* In 3D mode, make SPACE behave the same as holding down a mose button: the
currently pointed-at object is locked. Required some modification of a.m32
to play well (i.e. not reset SPACE). This is useful by itself but more so
in conjunction with the next point
* make Alt behave as a modifier with PGUP/PGDN: when aiming at a 2-sided wall,
move the other side's sector's ceiling or floor (only this is new).
* Auto-alignment of walls can be controlled in a finer grained fashion now:
When pressing '.', only the immediate neighbors get aligned. Use Ctrl-. for
the old behaviour.
* When inserting a point in 2D mode, auto-align the neighboring wall
git-svn-id: https://svn.eduke32.com/eduke32@1848 1a8010ca-5511-0410-912e-c29ae57300e0
hendricks266
helixhorned
terminx
plagman
qbix79