/*
* jdinput.c
*
* Copyright (C) 1991-1997, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
*
* This file contains input control logic for the JPEG decompressor.
* These routines are concerned with controlling the decompressor's input
* processing (marker reading and coefficient decoding).  The actual input
* reading is done in jdmarker.c, jdhuff.c, and jdphuff.c.
*/

#define JPEG_INTERNALS
#include "jinclude.h"
#include "jpeglib.h"


/* Private state */

typedef struct {
	struct jpeg_input_controller pub; /* public fields */

	boolean inheaders;		/* TRUE until first SOS is reached */
} my_input_controller;

typedef my_input_controller * my_inputctl_ptr;


/* Forward declarations */
METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo));


/*
* Routines to calculate various quantities related to the size of the image.
*/

LOCAL(void)
initial_setup (j_decompress_ptr cinfo)
/* Called once, when first SOS marker is reached */
{
	int ci;
	jpeg_component_info *compptr;

	/* Make sure image isn't bigger than I can handle */
	if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
		(long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
		ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);

	/* For now, precision must match compiled-in value... */
	if (cinfo->data_precision != BITS_IN_JSAMPLE)
		ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);

	/* Check that number of components won't exceed internal array sizes */
	if (cinfo->num_components > MAX_COMPONENTS)
		ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
		MAX_COMPONENTS);

	/* Compute maximum sampling factors; check factor validity */
	cinfo->max_h_samp_factor = 1;
	cinfo->max_v_samp_factor = 1;
	for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
		ci++, compptr++) {
			if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR ||
				compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR)
				ERREXIT(cinfo, JERR_BAD_SAMPLING);
			cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor,
				compptr->h_samp_factor);
			cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor,
				compptr->v_samp_factor);
	}

	/* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE.
	* In the full decompressor, this will be overridden by jdmaster.c;
	* but in the transcoder, jdmaster.c is not used, so we must do it here.
	*/
	cinfo->min_DCT_scaled_size = DCTSIZE;

	/* Compute dimensions of components */
	for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
		ci++, compptr++) {
			compptr->DCT_scaled_size = DCTSIZE;
			/* Size in DCT blocks */
			compptr->width_in_blocks = (JDIMENSION)
				jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
				(long) (cinfo->max_h_samp_factor * DCTSIZE));
			compptr->height_in_blocks = (JDIMENSION)
				jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
				(long) (cinfo->max_v_samp_factor * DCTSIZE));
			/* downsampled_width and downsampled_height will also be overridden by
			* jdmaster.c if we are doing full decompression.  The transcoder library
			* doesn't use these values, but the calling application might.
			*/
			/* Size in samples */
			compptr->downsampled_width = (JDIMENSION)
				jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
				(long) cinfo->max_h_samp_factor);
			compptr->downsampled_height = (JDIMENSION)
				jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
				(long) cinfo->max_v_samp_factor);
			/* Mark component needed, until color conversion says otherwise */
			compptr->component_needed = TRUE;
			/* Mark no quantization table yet saved for component */
			compptr->quant_table = NULL;
	}

	/* Compute number of fully interleaved MCU rows. */
	cinfo->total_iMCU_rows = (JDIMENSION)
		jdiv_round_up((long) cinfo->image_height,
		(long) (cinfo->max_v_samp_factor*DCTSIZE));

	/* Decide whether file contains multiple scans */
	if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode)
		cinfo->inputctl->has_multiple_scans = TRUE;
	else
		cinfo->inputctl->has_multiple_scans = FALSE;
}


LOCAL(void)
per_scan_setup (j_decompress_ptr cinfo)
/* Do computations that are needed before processing a JPEG scan */
/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */
{
	int ci, mcublks, tmp;
	jpeg_component_info *compptr;

	if (cinfo->comps_in_scan == 1) {

		/* Noninterleaved (single-component) scan */
		compptr = cinfo->cur_comp_info[0];

		/* Overall image size in MCUs */
		cinfo->MCUs_per_row = compptr->width_in_blocks;
		cinfo->MCU_rows_in_scan = compptr->height_in_blocks;

		/* For noninterleaved scan, always one block per MCU */
		compptr->MCU_width = 1;
		compptr->MCU_height = 1;
		compptr->MCU_blocks = 1;
		compptr->MCU_sample_width = compptr->DCT_scaled_size;
		compptr->last_col_width = 1;
		/* For noninterleaved scans, it is convenient to define last_row_height
		* as the number of block rows present in the last iMCU row.
		*/
		tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor);
		if (tmp == 0) tmp = compptr->v_samp_factor;
		compptr->last_row_height = tmp;

		/* Prepare array describing MCU composition */
		cinfo->blocks_in_MCU = 1;
		cinfo->MCU_membership[0] = 0;

	} else {

		/* Interleaved (multi-component) scan */
		if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN)
			ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan,
			MAX_COMPS_IN_SCAN);

		/* Overall image size in MCUs */
		cinfo->MCUs_per_row = (JDIMENSION)
			jdiv_round_up((long) cinfo->image_width,
			(long) (cinfo->max_h_samp_factor*DCTSIZE));
		cinfo->MCU_rows_in_scan = (JDIMENSION)
			jdiv_round_up((long) cinfo->image_height,
			(long) (cinfo->max_v_samp_factor*DCTSIZE));

		cinfo->blocks_in_MCU = 0;

		for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
			compptr = cinfo->cur_comp_info[ci];
			/* Sampling factors give # of blocks of component in each MCU */
			compptr->MCU_width = compptr->h_samp_factor;
			compptr->MCU_height = compptr->v_samp_factor;
			compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
			compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size;
			/* Figure number of non-dummy blocks in last MCU column & row */
			tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
			if (tmp == 0) tmp = compptr->MCU_width;
			compptr->last_col_width = tmp;
			tmp = (int) (compptr->height_in_blocks % compptr->MCU_height);
			if (tmp == 0) tmp = compptr->MCU_height;
			compptr->last_row_height = tmp;
			/* Prepare array describing MCU composition */
			mcublks = compptr->MCU_blocks;
			if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU)
				ERREXIT(cinfo, JERR_BAD_MCU_SIZE);
			while (mcublks-- > 0) {
				cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci;
			}
		}

	}
}


/*
* Save away a copy of the Q-table referenced by each component present
* in the current scan, unless already saved during a prior scan.
*
* In a multiple-scan JPEG file, the encoder could assign different components
* the same Q-table slot number, but change table definitions between scans
* so that each component uses a different Q-table.  (The IJG encoder is not
* currently capable of doing this, but other encoders might.)  Since we want
* to be able to dequantize all the components at the end of the file, this
* means that we have to save away the table actually used for each component.
* We do this by copying the table at the start of the first scan containing
* the component.
* The JPEG spec prohibits the encoder from changing the contents of a Q-table
* slot between scans of a component using that slot.  If the encoder does so
* anyway, this decoder will simply use the Q-table values that were current
* at the start of the first scan for the component.
*
* The decompressor output side looks only at the saved quant tables,
* not at the current Q-table slots.
*/

LOCAL(void)
latch_quant_tables (j_decompress_ptr cinfo)
{
	int ci, qtblno;
	jpeg_component_info *compptr;
	JQUANT_TBL * qtbl;

	for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
		compptr = cinfo->cur_comp_info[ci];
		/* No work if we already saved Q-table for this component */
		if (compptr->quant_table != NULL)
			continue;
		/* Make sure specified quantization table is present */
		qtblno = compptr->quant_tbl_no;
		if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
			cinfo->quant_tbl_ptrs[qtblno] == NULL)
			ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
		/* OK, save away the quantization table */
		qtbl = (JQUANT_TBL *)
			(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
			SIZEOF(JQUANT_TBL));
		MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL));
		compptr->quant_table = qtbl;
	}
}


/*
* Initialize the input modules to read a scan of compressed data.
* The first call to this is done by jdmaster.c after initializing
* the entire decompressor (during jpeg_start_decompress).
* Subsequent calls come from consume_markers, below.
*/

METHODDEF(void)
start_input_pass (j_decompress_ptr cinfo)
{
	per_scan_setup(cinfo);
	latch_quant_tables(cinfo);
	(*cinfo->entropy->start_pass) (cinfo);
	(*cinfo->coef->start_input_pass) (cinfo);
	cinfo->inputctl->consume_input = cinfo->coef->consume_data;
}


/*
* Finish up after inputting a compressed-data scan.
* This is called by the coefficient controller after it's read all
* the expected data of the scan.
*/

METHODDEF(void)
finish_input_pass (j_decompress_ptr cinfo)
{
	cinfo->inputctl->consume_input = consume_markers;
}


/*
* Read JPEG markers before, between, or after compressed-data scans.
* Change state as necessary when a new scan is reached.
* Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
*
* The consume_input method pointer points either here or to the
* coefficient controller's consume_data routine, depending on whether
* we are reading a compressed data segment or inter-segment markers.
*/

METHODDEF(int)
consume_markers (j_decompress_ptr cinfo)
{
	my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl;
	int val;

	if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */
		return JPEG_REACHED_EOI;

	val = (*cinfo->marker->read_markers) (cinfo);

	switch (val) {
  case JPEG_REACHED_SOS:	/* Found SOS */
	  if (inputctl->inheaders) {	/* 1st SOS */
		  initial_setup(cinfo);
		  inputctl->inheaders = FALSE;
		  /* Note: start_input_pass must be called by jdmaster.c
		  * before any more input can be consumed.  jdapimin.c is
		  * responsible for enforcing this sequencing.
		  */
	  } else {			/* 2nd or later SOS marker */
		  if (! inputctl->pub.has_multiple_scans)
			  ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */
		  start_input_pass(cinfo);
	  }
	  break;
  case JPEG_REACHED_EOI:	/* Found EOI */
	  inputctl->pub.eoi_reached = TRUE;
	  if (inputctl->inheaders) {	/* Tables-only datastream, apparently */
		  if (cinfo->marker->saw_SOF)
			  ERREXIT(cinfo, JERR_SOF_NO_SOS);
	  } else {
		  /* Prevent infinite loop in coef ctlr's decompress_data routine
		  * if user set output_scan_number larger than number of scans.
		  */
		  if (cinfo->output_scan_number > cinfo->input_scan_number)
			  cinfo->output_scan_number = cinfo->input_scan_number;
	  }
	  break;
  case JPEG_SUSPENDED:
	  break;
	}

	return val;
}


/*
* Reset state to begin a fresh datastream.
*/

METHODDEF(void)
reset_input_controller (j_decompress_ptr cinfo)
{
	my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl;

	inputctl->pub.consume_input = consume_markers;
	inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
	inputctl->pub.eoi_reached = FALSE;
	inputctl->inheaders = TRUE;
	/* Reset other modules */
	(*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
	(*cinfo->marker->reset_marker_reader) (cinfo);
	/* Reset progression state -- would be cleaner if entropy decoder did this */
	cinfo->coef_bits = NULL;
}


/*
* Initialize the input controller module.
* This is called only once, when the decompression object is created.
*/

GLOBAL(void)
jinit_input_controller (j_decompress_ptr cinfo)
{
	my_inputctl_ptr inputctl;

	/* Create subobject in permanent pool */
	inputctl = (my_inputctl_ptr)
		(*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
		SIZEOF(my_input_controller));
	cinfo->inputctl = (struct jpeg_input_controller *) inputctl;
	/* Initialize method pointers */
	inputctl->pub.consume_input = consume_markers;
	inputctl->pub.reset_input_controller = reset_input_controller;
	inputctl->pub.start_input_pass = start_input_pass;
	inputctl->pub.finish_input_pass = finish_input_pass;
	/* Initialize state: can't use reset_input_controller since we don't
	* want to try to reset other modules yet.
	*/
	inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
	inputctl->pub.eoi_reached = FALSE;
	inputctl->inheaders = TRUE;
}