unsigned integer that can use all 32 bits. They must therefore use
the unsigned mul instruction rather than the signed imul instruction.
- Fixed several signed/unsigned comparison and possibly uninitialized
variable warnings flagged by GCC.
SVN r1965 (trunk)
player sprites will retain the same precision they had when they were
rendered as part of the 3D view. (needed for propery alignment of flashes
on top of weapon sprites) It worked just fine for D3D, but software
rendering was another matter. I consequently did battle with imprecisions
in the whole masked texture drawing routines that had previously been
partially masked by only drawing on whole pixel boundaries. Particularly,
the tops of posts are calculated by multiplying by spryscale, and the
texture mapping coordinates are calculated by multiplying by dc_iscale
(where dc_iscale = 1 / spryscale). Since these are both 16.16 fixed point
values, there is a significant variance. For best results, the drawing
routines should only use one of these values, but that would mean
introducing division into the inner loop. If the division removed the
necessity for the fudge code in R_DrawMaskedColumn(), would it be worth it?
Or would the divide be slower than the fudging? Or would I be better off
doing it like Build and using transparent pixel checks instead, not
bothering with skipping transparent areas? For now, I chop off the
fractional part of the top coordinate for software drawing, since it was
the easiest thing to do (even if it wasn't the most correct thing to do).
SVN r1955 (trunk)
at just fixing it at a specific value, since the supply of SM14 cards isn't
all that diverse and all from ATI, but apparently Radeon 8500s and 9000s
have different precision levels in their pixel shaders. See bug report
<http://forum.zdoom.org/viewtopic.php?p=444523>
- Removed unused variables FBFormat and PalFormat.
SVN r1901 (trunk)
Mobility Radeon 9000 (on a PCI card, no less!), I have decided to give the
PS14 support some loving: D3D windowed gamma now works on these cards using
a texture lookup for the gamma table. Sadly, this halves my framerate, so
setting gamma to 1 will skip the gamma correction, as it was before, for
full speed. (On my 8800 GT, the gamma correction was free.)
SVN r1898 (trunk)
surfaces are alternately locked for read-only access each frame, forcing
the driver to stop buffering more than one frame at a time. The input lag
on my system doesn't seem to be as bad as it once was (I can no longer
see it obviously with my naked eye), but turning antilag on "feels"
slightly more responsive. The cvar d3d_antilag turns this technique on and
off. See <http://www.xyzw.de/c120.html> for more details.
SVN r1870 (trunk)
which could cause crashes.
- Added custom special colormaps to DECORATE.
- Cleaned up special colormap code and removed lots of dependencies on the
knowledge of the tables' contents.
SVN r1860 (trunk)
completely ignore them, either).
- Separated light level fixing out of player_t's fixedcolormap parameter.
Using a fixed light level (e.g. PowerTorch) will no longer wipe out
colored lighting.
- Moved the blending rectangle drawing into a separate discrete stage, since
doing it while copying the 3D view window to the display now blends
underneath the weapon instead of on top of it.
- Consolidated the special colormaps into a single 2D table.
- Tweaked the special colormaps slightly to make the true color results more
closely match the paletted approximations.
- fb_d3d9_shaders.h was getting unwieldy, so I moved the shaders out of the
executable and into zdoom.pk3. Shaders are still precompiled so I don't need
to pull in a dependancy on D3DX.
- Added a few more shaders to accomodate drawing weapons with all the in-game
lighting models. These are accessed with the new DrawTexture tags
DTA_SpecialColormap and DTA_ColormapStyle.
- Player weapon sprites are now drawn using Direct3D and receive all the
benefits thereof.
SVN r1858 (trunk)
- moved default item drop style into gameinfo.
- moved default respawn time into gameinfo.
- moved default inventory max amount into gameinfo.
- turned Heretic's blocking of the sector for LS_Plat_RaiseAndStayTx0 into
a parameter instead of having the game mode decide.
SVN r1812 (trunk)
edit-and-continue from working for the Windows source files.
- When a WM_KEYDOWN message is received with VK_PROCESSKEY, the scan key is
now used to retrieve the real virtual key for the message. This fixes the
previous issue that caused me to completely disable the IME.
- Removed the code that disables the IME, since it also disables the ability
to switch between keyboard layouts that do not use an IME.
- TranslateMessage() is no longer called if GUI capture mode is off, so no
dead key processing is performed until it might be useful.
SVN r1758 (trunk)
issues that caused its inclusion. Is an optimized GCC build any faster
for being able to use strict aliasing rules? I dunno. It's still slower
than a VC++ build.
I did run into two cases where TAutoSegIterator caused intractable problems
with breaking strict aliasing rules, so I removed the templating from it,
and the caller is now responsible for casting the probe value from void *.
- Removed #include "autosegs.h" from several files that did not need it
(in particular, dobject.h when not compiling with VC++).
SVN r1743 (trunk)
- Joystick devices now send key up events for any buttons that are held
down when they are destroyed.
- Changed the joystick enable-y menu items to be nonrepeatable so that you
can't create several device scans per second. Changing them with a
controller is also disabled so that you can't, for example, toggle XInput
support using an XInput controller and have things go haywire when the
game receives an infinite number of key down events when the controller
is reinitialized with the other input system.
- Changed menu input to use a consolidated set of buttons, so most menus
can be navigated with a controller as well as a keyboard.
- Changed the way that X/Y analog axes are converted to digital axes.
Previously, this was done by checking if each axis was outside its deadzone.
Now they are checked together based on their angle, so straight up/down/
left/right are much easier to achieve.
SVN r1739 (trunk)
methods. Analog axes now respond Button_Speed and cl_run in exactly the
same way as digital buttons do.
- Changed rounding slightly for analog axis -> integer in G_BuildTiccmd().
- Fixed: FXInputController::ProcessThumbstick() was slightly off when it
converted to the range [-1.0,+1.0].
SVN r1733 (trunk)
and a list of all attached controllers, and a second level for configuring
an individual controller.
- Fixed: Pressing Up at the top of a menu with more lines than fit on screen
would find an incorrect bottom position if the menu had a custom top height.
- Added the cvars joy_dinput, joy_ps2raw, and joy_xinput to enable/disable
specific game controller input systems independant of each other.
- Device change broadcasts are now sent to the Doom event queue, so
device scanning can be handled in one common place.
- Added a fast version of IsXInputDevice that uses the Raw Input device
list, because querying WMI for this information is painfully slow.
- Added support for compiling with FMOD Ex 4.26+ and running the game
with an older DLL. This combination will now produce sound.
SVN r1717 (trunk)
- Added XInput support. For the benefit of people compiling with MinGW,
the CMakeLists.txt checks for xinput.h and disables it if it cannot
be found. (And much to my surprise, I accidentally discovered that if you
have the DirectX SDK installed, those headers actually do work with GCC,
though they add a few extra warnings.)
SVN r1686 (trunk)
and loading, XInput, allow axes to be used as buttons (for the Xbox
controller's trigger buttons), allow the joystick to move through the
menus, and my PS2 adapter which has no Vista x64 drivers.
* I'm sure SDL is broken again. Don't bother reporting it, because I already know.
SVN r1680 (trunk)
took far too long to reach this point.) Manual axis configuration is
currently disabled, since I need to rewrite that, too. The eventual point of
this is that the code will be modular enough that I can just plop in
routines for XInput controllers and driver-less PlayStation 2 adapters
without much fuss, since the old joystick code was very much DirectInput-
centric.
SVN r1672 (trunk)
default bindings for it. (Only works with Raw Input on XP. Vista has
support through Win32 mouse, as well. DirectInput does not support it at
all, because the DirectInput mouse device does not expose this control.)
SVN r1640 (trunk)
the PC98 equivalent so it would be recognized as kp=. (Interestingly, F13-
F16 and kp= only generate events when using Raw Input, not when using
DirectInput.
SVN r1639 (trunk)
fullscreen. (e.g. You could no longer scroll the console with the mouse
buffer.)
- Fixed: Wheeling down was seen as wheeling up with the Win32 mouse.
SVN r1618 (trunk)
in data2. This was just unnecessary overhead that wasn't really needed
anywhere.
- Moved GUI-mode input into a separate function to make the code easier to
read.
SVN r1617 (trunk)
switched it to buffered input, and the pause key seems to be properly
cooked, so I don't need to look for it with WM_KEYDOWN/UP. Tab doesn't
need to be special-cased either, because buffered input never passes on
the Tab key when you press Alt+Tab. I have no idea why I special-cased
Num Lock, but it seems to be working fine. By setting the exclusive mode
to background, I can also avoid special code for releasing all keys when
the window loses focus, because I'll still receive those events while the
window is in the background.
SVN r1613 (trunk)
mouse should be grabbed. This fixes the case where you start the game in
the background and it grabs the mouse anyway.
- Changed raw mouse grabbing to call ShowCursor() directly instead of through
SetCursorState(), since changing the pointer isn't working with it
(probably due to the lack of legacy mouse messages), and the others work
fine by setting an invisible cursor.
- Fixed: Raw mouse input passes wheel movements in an unsigned field, but the
value is signed, so it requires a cast to use it.
- Reverted accidental changes to src/sdl/i_input.cpp.
SVN r1605 (trunk)
with RIDEV_NOLEGACY apparently prevents SetCursor() from doing anything.
- Split mouse code off from i_input.cpp into i_mouse.cpp and added raw mouse
handling. (WM_INPUT obsoleted most of DirectInput for XP.)
- Fixed: Similar to the Win32 mouse, using the DirectInput mouse in windowed
mode, if you alt-tabbed away and then clicked on the window's title bar,
mouse input would be frozen until the mouse was ungrabbed again.
SVN r1601 (trunk)
clicking on the window's title bar moved it practically off the screen.
- Beginnings of i_input.cpp rewrite: Win32 and DirectInput mouse handling has
been moved into classes.
SVN r1597 (trunk)
- Removed #pragma warnings from cmdlib.h and fixed the places where they were
still triggered.
These #pragmas were responsible for >90% of the GCC warnings that were not
listed in VC++.
- Fixed one bug in the process: DSeqNode::m_Atten was never adjusted when the
parameter handling of the sound functions for attenuation was changed.
Changed m_Atten to a float and fixed the SNDSEQ parser to set proper values.
Also added the option to specify attenuation with direct values in addition
to the predefined names.
SVN r1583 (trunk)
