* Added compatibility for Hellbound MAP29
- Some of the ceilings in the monster closets weren't high enough to allow the cyberdemons to pass, making 100% kills impossible. This is caused by the floors not going down far enough and stopping at a certain height above the next closest floor.
* Remove the cyberdemons instead of raising the ceilings.
Removed the red key door compat patch for Illusions of Home E3M7 because a switch (the computer panel, rather) already opened that door as it was, therefore the original change was unnecessary.
Default: off (false)
When this option is enabled (true), then exiting the game from
main menu and by menu_quit command doesn't require confirmation
and doesn't play sound.
Steps to reproduce:
1. Load game.
2. Press any key to bring up the main menu.
3. Move the mouse anywhere out of the menu entries.
4. Press Down arrow.
Expected result: the menu cursor sound is played, the first menu element is selected.
Actual result: the menu cursor sound is played, no menu element is selected.
Repeated Down arrow pressing doesn't give any result, either.
If on step 4 Up arrow is pressed, the last element in the menu is selected.
They are attached and actived explicitly during usual actor initialization sequence
Postponed processing applicable to so called user dynamic lights must be skipped for them
RECREATELIGHTS flag handling for dynamic light actors had the opposite effect of deactivating them
https://forum.zdoom.org/viewtopic.php?t=65683
Rationale:
When a mod adds a custom option menu, it adds a space before it, like this:
```
AddOptionMenu OptionsMenu
{
StaticText ""
Submenu "$MYTITLE", MyOptions
}
```
to prevent custom option menu being in the same block as the last entries in the
standard options list. It's okay.
But when more than one such mod is loaded, each one of them adds a space before
their option menu entry, and Options Menu becomes unnecessary bloated.
This simple edit allows mods to not add a space, still be separated from
standard options.
* Fix issues in ILLUSORY/ilusory1
Added some compatibility patches for Illusions of Home E1M6, E3M4, and E3M7 (this fixes minor issues to all of these maps)
E1M8 requires a MAPINFO of some sort to have work correctly in the state it's in, unfortunately.
* Minor tweak to ILLUSORY/ilusory1 fix
Didn't need the activation reset as it was already set to begin with.
* Made the fixes consistent
Made the fixes consistent with the rest of the fixes for the other WADs already in this file
With `crosshairhealth 2`, the crosshair will now
go from white to yellow, then yellow to red as the player's health
decreases. As the player's health increases up to 200, the crosshair
will also go from white to green to indicate overheal.
This is similar to the implementation in games like Xonotic.
The old behavior (`crosshairhealth 1`) is still the default.
Script warning, "gzdoom.pk3:zscript/ui/menu/conversationmenu.zs" line 159:
Truncation of floating point value
Script warning, "gzdoom.pk3:zscript/ui/menu/conversationmenu.zs" line 161:
Truncation of floating point value
- e5m2: floating skulls disappear on lower skill levels
- e5m4: the platform with the baron of hell that led to the invulnerability secret had a missing texture
This was one of that annoying old design mistakes where Doom and Heretic features were poorly merged together. The Heretic Gargoyle uses very similar coding but performs a subtly different action when actually hitting another actor. This different action was made the default, even for the Lost Soul.
It has now been changed that both monsters use their original action, being distinguished by an actor flag. For compatibility with custom definitions Heretic's behavior, which has been the default in ZDoom will be the preferred one. The one of the Lost Soul can be reactivated by a flag.
Most importantly, specifying a patch may optionally disallow showing the autor's name - this is for cases where a styled patch gets used for English but text-based translations of the map name should still be possible.
This looks a lot better. Unfortunately for the regular SmallFont this would severely reduce the available space for the text so it isn't done here, even though for shorter texts the formatting would look better as well.
Duration of sound playback and subtitles display will be synchronized if sound id is specified
For existing Strife messages this works out of the box
https://forum.zdoom.org/viewtopic.php?t=65379
What could be done has been moved into the filter directory of game_support.pk3
Unfortunately most of the rest is needed as presets even for custom games so it cannot be fully cleaned up, because the dependencies here and the filter structure do not align 100%.
* sprite offset definitions, which are IWAD dependent
* Freedoom's decal overrides
* conversation ID definitions for the Strife teasers
* the fallback BigFont now can also be loaded by IWADs which declare themselves as GAME_Heretic or GAME_Hexen.
* the Doom status bar has been partially virtualized to allow overriding specific parts of it, most notably the ammo display
* the internal Harmony status bar has been removed because it only works with the now disabled Dehacked patch.
* the SBARINFO definition has been removed, instead it uses a ZScript-based status bar now which overrides the ammo display to use the new ammo types instead.
This was done for two reasons:
1. It forces loading of zd_extra.pk3 for the stock IWADs, eliminating a certain kind of user error.
2. It removes the stock IWAD definitions for custom games that distribute the engine along with their data, so that it doesn't pick up on Steam and GOG installations and shows an inappropriate IWAD picker.
Unlike the other games this required a bit of patching of the IWAD's data with a new MAPINFO so it needs to be in a separate .pk3 file loaded after the IWAD.
Since this needs to be loaded after the IWAD it was also possible to add a small DECORATE lump which fixes a few errors inherited from the original Dehacked patch, like monster counting bugs and unintentionally shootable decorations.
There were two issues blocking this:
* the Doom BigUpper font was loaded for all Doom-based games. It is only valid for original idgames releases and nothing more.
* Hacx.wad defines its BigFont in FONTDEFS which blocks all custom fonts. Since the Hacx font and GZDoom's base BigFont are very similar, the FONTDEFS lump now gets deleted from the WAD directory.
Exit_Normal and Exit_Secret specials imply addition conditions to make a decision about proceeding to the next map
A few scriptified actors require a bypass of these conditions in order to work properly
Script warning, "gzdoom.pk3:zscript/ui/statscreen/statscreen.zs" line 24:
Call to deprecated function CharAt
Script warning, "gzdoom.pk3:zscript/ui/statscreen/statscreen.zs" line 24:
Accessing deprecated function CharAt - deprecated since 4.1.0
Script warning, "gzdoom.pk3:zscript/ui/menu/search/query.zs" line 64:
Call to deprecated function ToLower
Script warning, "gzdoom.pk3:zscript/ui/menu/search/query.zs" line 64:
Accessing deprecated function ToLower - deprecated since 4.1.0
Script warning, "gzdoom.pk3:zscript/ui/menu/search/query.zs" line 65:
Call to deprecated function ToLower
Script warning, "gzdoom.pk3:zscript/ui/menu/search/query.zs" line 65:
Accessing deprecated function ToLower - deprecated since 4.1.0
Script warning, "gzdoom.pk3:zscript/ui/menu/conversationmenu.zs" line 202:
Call to deprecated function CharAt
Script warning, "gzdoom.pk3:zscript/ui/menu/conversationmenu.zs" line 202:
Accessing deprecated function CharAt - deprecated since 4.1.0
Script warning, "gzdoom.pk3:zscript/ui/menu/conversationmenu.zs" line 235:
Call to deprecated function CharAt
Script warning, "gzdoom.pk3:zscript/ui/menu/conversationmenu.zs" line 235:
Accessing deprecated function CharAt - deprecated since 4.1.0
The episode titles required a workaround because the CQ3 episodes do not contain names in text form: If this is the case, the patch name will be used as a string table identifier to get a matching text for localization.
* - Added support for monospacing alignment modes to HUDFont / BaseStatusBar.DrawString
* - added underlying type declaration for EMonospacing
* - replaced "#include v_video.h" with a declaration of EMonospacing
This deprecated CharAt and CharCodeAt for being unsuitable for text processing and in the case of CharCodeAt also for being buggy.
A new replacement, ByteAt has been added that reads a string byte by byte, as well as CodePointCount, which counts the amount of Unicode code points in a string and GetNextCodePoint which reads the string code point by code point.
Note that while this woll work as intended with the currently supported languages as a means to read single characters, there is no guarantee that this will remain so if Unicode support gets extended to things which break the "one code point == one character" assumption.
This is for IWADs that contain content which clashes with the engine and must be removed. The primary reason are the unimplemented characters in Raven's BigFont.
This was meant for using the VGA font in the alternative HUD but this never went beyond the Kill/Item/Secret display which isn't useful for localization.
Some reorganization to avoid code duplication plus making the log screen capable of using the generic font. This also means that the popup for the log in Strife's status bar will be disabled when in generic mode - this popup with its special font would be a bit problematic.
It's "doom.id.doom1/2" instead of "doom.doom1/2" now.
The config file's content will be renamed and for lump filtering a fallback has been added - note that you cannot combine both naming schemes! The old one has to be considered deprecated now.
This also removes the duplicated content necessitated by the old naming scheme.
The file renames “enu” to “default” for consistency and only contains languages that are complete/up to date, i.e. American English, British English, German, Castilian Spanish, Latin American Spanish, French, and Russian. Italian, while not 100% complete, contains a full engine translation, so it has enough material to make it here.
The current menu system simply does not work that well with 320x200, rendering the game hard to use at that tiny screen size. This is a clear case where the work required to keep it operational stands in no relation to the benefit.
There are two options here - one only disables the vertical thrust and the other goes back fully to the original non-z-aware code.
Both options are settable through MAPINFO.
For the compatibility presets, the normal ones only disable the vertical thrust, the strict ones force use of the old code entirely.
This was yet another piece of code that essentially was unworkable thanks to the limited screen space with the old bitmap fonts.
With the new font there is enough screen space to do this properly.
This has to be set in the console, the default is still the regular small font. Mainly added because some mods have really hard to read fonts where it is not easy to decipher the numbers.
1. Top-level menu names are now properly handled.
2. Changing "Any or All terms" option now immediately updates the results.
3. Reformatted menu.zs to have tabs instead of spaces.
The default was changed to replace graphics if only known content is affected.
This also required blocking the feature for Hacx, Harmony and Action Doom 2 which have no localization yet and would fall back on Doom's texts if not blocked.
- clamp scissors fully to avoid NVidia's awful drivers locking up the entire system if they end up out of bounds
- perform buffer clears as part of the render pass. this puts some restrictions on how FRenderState.Clear can be used
- add an offset uniform to the present shaders so the vulkan target can flip the image during presentation
The most important one is the autosave tagging. This was done because the old printout was missing the year and printed the month as a 3 character English string, sabotaging any attempt to sort the autosaves by anything meaningful.
Parts of this menu suffered badly from lack of screen space to convey the intended information due to the oversized fonts. With the new font this is a lot less problematic (unless using 320x200, of course)
Unlike uObjectColor2, this is more global state. uObjectColor2 is part of gradient calculation which may later be offloaded to a secondary buffer which already resulted in only conditionally setting it, resulting in broken special colormap application for the software renderer.
This option value is used for 4 different options, and splitting it up into three will allow for languages based on grammatical gender systems to have different endings. Necessary for e.g. Russian in order to sound correctly.
The corresponding strings are already in the language spreadsheet.
The recent localization work has made it apparent that on many images the menu was extremely hard to read because its colors often clash with the background.
The choice of a bright overlay color with extremely low opacity is simply not enough to make the menus comfortable to navigate. Chex Quest was particularly bad but the problem existed in many Doom mods as well.
This also changes the CQ dim color to something a bit more green to better fit with the theme.
- moved language entry up a bit in the menu
- converted the language entry into a proper CVAR string list selection, instead of a separate menu with said list.
Now a localization mod can disable the graphics patches containing text entirely so that it can properly localize the text based menu variant.
If this flag gets set in MAPINFO, it will override all user settings.
In this menu, all languages supported by GZDoom are selectable with one simple click! Credits to @PROPHESSOR for making it!
(This only edits the English and French languages because they are the only languages currently up to date with GZDoom’s development. A Russian translation will follow suit at a later date.)
* added a CVAR that sets how localizable graphics need to be dealt with.
* pass the substitution string to OkForLocalization so that proper checks can be performed.
* increased item spacing on Doom's list menus to 18 from 16 pixels, because otherwise the diacritic letters would not fit. 20 would have been more ideal but 18 was the limit without compromising its visual style
* added a second text-only main menu because here the spacing cannot be changed. Doing so would render any single-patch main menu non-functional. So here the rules are that if substitution takes place, it will swap out the entire menu class.
* fixed some issues with the summary screen's "entering" and "finished" graphics.
Passing something non-constant at compile time here is extremely dangerous, especially when users can replace those strings if they like.
It now uses FString::Substitute in all cases where something needs to be inserted into a template string.
* entering a savegame description did not work anymore
* the length check was too restrictive and always underestimated the available space
* use the console font for entering a savegame description. This has more characters and better contrast for this content.
* the interface to the text enterer used bad measurements.
What is done:
D1. Controls are separated by existing sections, each section is now a submenu;
D2. The original sections are preserved;
D3. The original controls order is preserved;
D4. "Controls" section is renamed to "Game", because "Controls" submenu of "Customize Controls" would be too confusing;
D5. Map (automap) controls are added as a section, map controls submenu is unchanged;
D6. Missing controls are added to "Other" section;
D7. Sections are given a title following the scheme "Customize <section> Controls", except N4 (see below).
D8. Inside the sections, spaces are added to group the related controls.
Things that I'm not sure about:
N1. "Game" controls section name is too generic - I'll gladly change it to something more suitable;
N2. "Other" controls section name is too generic - I'll gladly change it to something more suitable;
N3. Map controls submenu could use some spacing, and internal title ("Map Controls") is redundant;
N4. "Strife Popup Screens" section name is too long to fit in scheme described in D7, therefore the title is "Strife Popup Screens Controls";
N5. "Game" section could be divided further, but this will break the original menu structure.
For the Doom IWADs the provided font looks almost identical to the characters used on the title patches. So, for any level name that got replaced in some language, it will now check if the retrieved name comes from the default table, and if not, ignore the title patch and print the name with the specified font.
This also required removing the 'en' label from the default table, because with this present, the text would always be picked from 'en' instead of 'default'. Since 'en' and 'default' had the same contents, in any English locale the 'default' table was never hit, so this won't make any difference for the texts being chosen.
Last but not least, wminfo has been made a local variable in G_DoCompleted. There were two places where this was accessed from outside the summary screen or its setup code, and both were incorrect.
This was broken by several small unicode-incompatible code fragments.
This commit also removes the input limit for the player name and the savegame description. With multibyte encoding, limiting them to a fixed length did not work right.
Currently these will just overflow the fields if the text becomes too long, this needs some additional work.
Now that GZDoom supports uppercase and lowercase characters in the BIGFONT format, this commit actually adds those characters. It contains full support for both the English and Russian (minus the letter Ё) alphabets for both Doom and Strife. As for the existing punctuation graphic lumps in Strife, all extra space is removed, and the sprite offsets are adjusted instead.
This also adjusts the English language file so that all menu header texts utilize these new characters. As a tiny extra, it also adds the letter Ё to the Strife smallfont.
(Credits to Skulltag for the uppercase B, Amuscaria for the uppercase X and Z, and @jnechaevsky for all Russian characters, taken from Russian Doom!)
