be used when for walls and floors when the renderer is paletted. The format
is very simple:
rgbtex1 paltex1
rgbtex2 paltex2
...
The first texture is the one to be used normally, and the second is the one
to be used in paletted modes.
The vid_nopalsubstitutions cvar can be used to ignore this lump.
SVN r3311 (trunk)
GETPALOOKUP. The end result is that there is a minimum distance around you where light
amplification stops and it gets no brighter. Should this scale with visibility? I can't say.
So, yeah, it turns out all these years ago, I made this out to be harder than it really is.
SVN r3224 (trunk)
- added Sector_SetTranslucent special so set translucency of portal planes at run time.
- added 'additive' information for portal planes. This is no-op at the moment because the flat drawers can't handle additive translucency yet though.
SVN r3149 (trunk)
does not include xtoviewangle[centerx] in the mirroring so that the two columns at the center
of the screen do not map to the same angle. (BTW, this array is only used for the sky drawing.)
SVN r2487 (trunk)
it happened outside the moved actor's Tick function. This got particularly
obvious with moving skybox viewpoints (See Daedalus's MAP21 intro for a good
example.)
SVN r2059 (trunk)
former used fistp, which is not portable across platforms, so cannot be
used in the play simulation. They were only suitable for the renderer.
xs_Float.h also has a very fast float->fixed conversion, so FLOAT2FIXED
uses that now.
(And I also learned that the FPU's round to nearest is not the rounding I
learned in grade school but actually Banker's Rounding. I had no idea.)
(Also, also, the only thing that could have made quickertoint faster than
toint was that it stored a 32-bit int. I never timed them, and I doubt in
practice there was any real difference between the two.)
- Changed atan2f to atan2. Using floats is not a win, because the result is
returned as a double on the x87 stack, which the caller then needs to cast
down to a float using fst/fld.
SVN r1990 (trunk)
are scaled to the height of a 200 pixel tall sky. Skies taller than 240
use the same scale as a 240 tall sky but are shifted down to make the
top of the texture align with the top of the screen when looking fully up.
Thus, by using a sky texture with a height of 240 or more pixels, the sky
will be drawn with square pixels instead of the vertically elongated ones
imposed by Doom's native 320x200 resolution.
SVN r1978 (trunk)
- Improved sky stretching a bit: It now only stretches the sky as tall as it
needs to be: 228 pixels, not 256. It no longer stretches horizontally,
either.
The reason it stretches to 228 and not 200 pixels is because Doom shifted
its sky texture down 28 pixels. By stretching to 228 pixels, we can keep
the sky tiled at the same height on the horizon. Skies 200 pixels tall
(or more) will continue to tile at the center of the screen when looking
directly ahead.
SVN r1976 (trunk)
unsigned integer that can use all 32 bits. They must therefore use
the unsigned mul instruction rather than the signed imul instruction.
- Fixed several signed/unsigned comparison and possibly uninitialized
variable warnings flagged by GCC.
SVN r1965 (trunk)
size textures at any scale. I also tried doing sky scrolling on the sky
cylinder, but that didn't look so good, so I left it in screen space.
SVN r1932 (trunk)
completely ignore them, either).
- Separated light level fixing out of player_t's fixedcolormap parameter.
Using a fixed light level (e.g. PowerTorch) will no longer wipe out
colored lighting.
- Moved the blending rectangle drawing into a separate discrete stage, since
doing it while copying the 3D view window to the display now blends
underneath the weapon instead of on top of it.
- Consolidated the special colormaps into a single 2D table.
- Tweaked the special colormaps slightly to make the true color results more
closely match the paletted approximations.
- fb_d3d9_shaders.h was getting unwieldy, so I moved the shaders out of the
executable and into zdoom.pk3. Shaders are still precompiled so I don't need
to pull in a dependancy on D3DX.
- Added a few more shaders to accomodate drawing weapons with all the in-game
lighting models. These are accessed with the new DrawTexture tags
DTA_SpecialColormap and DTA_ColormapStyle.
- Player weapon sprites are now drawn using Direct3D and receive all the
benefits thereof.
SVN r1858 (trunk)
- Fixed: P_LineAttack may not check the puff actor for MF6_FORCEPAIN because
it's not necessarily spawned yet.
- Fixed: FWeaponSlots::PickNext/PrevWeapon must be limited to one iteration
through the weapon slots. Otherwise they will hang if there's no weapons
in a player's inventory.
SVN r1659 (trunk)
* scalex_top
* scaley_top
* scalex_mid
* scaley_mid
* scalex_bottom
* scalex_bottom
- Added sidedef versions of the linedef flags wrapmidtex and clipmidtex (via
UDMF; names are the same). If the flag is set on the line, it applies to
both sides. Otherwise, each side can control them individually.
SVN r1645 (trunk)
- Removed #pragma warnings from cmdlib.h and fixed the places where they were
still triggered.
These #pragmas were responsible for >90% of the GCC warnings that were not
listed in VC++.
- Fixed one bug in the process: DSeqNode::m_Atten was never adjusted when the
parameter handling of the sound functions for attenuation was changed.
Changed m_Atten to a float and fixed the SNDSEQ parser to set proper values.
Also added the option to specify attenuation with direct values in addition
to the predefined names.
SVN r1583 (trunk)
so that all files are included by a central one instead of compiling
each one separately. This speeds up the compilation process by 25%
when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.
SVN r1226 (trunk)
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
arbitrary point. It has been replaced with a variant that takes a polyobject
as a source, since that was the only use that couldn't be rewritten with the
other variants. This also fixes the bug that polyobject sounds were not
successfully saved and caused a crash when reloading the game. Note that
this is a significant change to how equality of sound sources is determined,
so some things may not behave quite the same as before. (Which would be a
bug, but hopefully everything still sounds the same.)
SVN r1059 (trunk)
that animated icons can be done with it.
- Changed FImageCollection to use a TArray to hold its data.
- Fixed: SetChanHeadSettings did an assignment instead of comparing
the channel ID witg CHAN_CEILING.
- Changed sound sequence names for animated doors to FNames.
- Automatically fixed: DCeiling didn't properly serialize its texture id.
- Replaced integers as texture ID representation with a specific new type
to track down all potentially incorrect uses and remaining WORDs used
for texture IDs so that more than 32767 or 65535 textures can be defined.
SVN r1036 (trunk)
- Grouped the sector plane texture transformation options into a separate
structure and replaced all access to them with wrapper functions.
SVN r1033 (trunk)
if the view is near the bounds of the fixed point coordinate system. This
happens because it rotates the view position around (0,0) according to
the current viewangle, so the resultant coordinate may be outside the
bounds of fixed point. All important math in this function is now done
entirely in floating point.
- Fixed: Slopes didn't draw right on 64-bit platforms.
SVN r986 (trunk)
Since it uses fixed point parameters it can only be used in scripts though.
- Added flags parameters to all wall scroller specials that didn't use
all 5 args.
- Separated scrolling of the 3 different texture parts of a sidedef.
While doing this I did some more restructuring of the sidedef structure
and changed it so that all state changes to sidedefs that affect rendering
have to be made with access functions. This is not of much use to the
software renderer but it allows far easier caching of rendering data
for OpenGL because the only place I need to check is in the access functions.
SVN r832 (trunk)
- Fixed: The MusicVolumes list was allocated with M_Malloc but freed with
delete.
- Fixed: demobuffer was inconsistantly handled with new[]/delete[] and
malloc/free.
- Added used memory tracking to M_Malloc() and M_Realloc(). This
necessitated the addition of an M_Free() call to track frees.
- Removed M_Calloc since it was only used in one place, and can just as well
be done with an M_Malloc/memset pair.
- Bumped DEMOGAMEVERSION for the new net controller codes.
SVN r751 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
drawn to a texture, then that texture is copied to the real back buffer
using a gamma-correcting pixel shader. In fullscreen mode, SetGammaRamp
is used.
- Fixed flashing of vid_fps display when fps > 1000.
- Fixed loading of RGB textures for native 2D mode.
- Changed the first rotozoomer's data because it just became too obvious when
the backdrop is drawn with a full 256 distinct colors available.
- Set the player backdrop to update no more frequently than 35 FPS, so opening
the player setup menu before starting a game won't produce a very fast
moving backdrop.
- Changed the player backdrop into a texture so that it can be drawn like
anything else.
SVN r648 (trunk)
I got rid of the old tx and ty CVARs because they made the texture scaling
much more complicated than it was actually needed (and besides, they were completely
useless except for testing purposes anyway.)
SVN r522 (trunk)
- PClass::StaticInit() now sorts the class metadata so that operations that
iterate over it (such as the "give all" cheat) are compiler-independant.
SVN r340 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
savegames at this point in time.
- Fixed: R_ClearPlanes() did not clear skybox planes for a full clear.
- Streamlined zip file loading by delaying the processing of the local file
header until it is actually needed.
SVN r247 (trunk)
functions added to the exit chain with atterm so that they can be called
in a deterministic order and not whatever order the linker decides to put
them in.
- Fixed: DCajunMaster did not free its getspawned.
- Fixed: P_FreeLevelData() did not free ACS scripts.
- Fixed: Level snapshots were not freed at exit.
- Fixed: The save/load menu list was not freed at exit.
- Fixed: FCompressedMemFile needs a destructor to free the m_ImplodedBuffer.
- Fixed: G_DoLoadGame() did not free the engine string.
- Fixed: M_ReadSaveStrings() did not free the engine string.
- Fixed: Processing DEM_SAVEGAME did not free the pathname string.
- Added a check for truncated flats to FFlatTexture::MakeTexture() because
Heretic's F_SKY1 is only four bytes long.
- Added a dump of the offending state to the "Cannot find state..." diagnostic.
- Fixed: FCompressedFile did not initialize m_Mode in its default constructor.
- Fixed: Heretic and Hexen status bars did not initialize ArtiRefresh.
- Fixed: PNGHandle destructor should use delete[] to free TextChunks.
SVN r111 (trunk)
merge a lot of these static destructor-only structs into regular
functions added to the exit chain with atterm so that they can be called
in a deterministic order and not whatever order the linker decides to put
them in. (Interestingly, the amount of memory used when repeatedly
executing the same map command at the console varies up and down, but it
now stays relatively stable rather than increasing unbounded.)
- Fixed: The list of resolutions in the video modes menu was not freed
at exit.
- Fixed: mus_playing.name was not freed at exit.
- Fixed: SN_StopAllSequences() should be called at the start of
P_FreeLevelData(), not just before the call to P_SetupLevel() in
G_DoLoadLevel(), so it can run even at exit. And C_FullConsole() can
call P_FreeLevelData() to free more memory too.
- Fixed: StatusBar was not freed at exit.
- Fixed: spritesorter was not freed at exit.
- Fixed: Bad things happened if FString's data pool was destroyed before
all C_RemoveTabCommand() calls were made.
- Added an overload for FArchive << FString.
- Fixed: The players' log text was not freed at exit.
- Fixed: Bot information was not freed at exit.
- Fixed: doomcom was not freed at exit. But since it's always created,
there's no reason why it needs to be allocated from the heap. My guess
is that in the DOS days, the external packet driver was responsible for
allocating doomcom and passed its location with the -net parameter.
- Fixed: FBlockNodes were not freed at exit.
- Fixed: Openings were not freed at exit.
- Fixed: Drawsegs were not freed at exit.
- Fixed: Vissprites were not freed at exit.
- Fixed: Console command history was not freed at exit.
- Fixed: Visplanes were not freed at exit.
- Fixed: Call P_FreeLevelData() at exit.
- Fixed: Channel, SoundCurve, and PlayList in s_sound.cpp were not freed at
exit.
- Fixed: Sound sequences were not freed at exit.
- Fixed: DSeqNode::Serialize() did not resize the m_SequenceChoices array
when loading.
SVN r106 (trunk)
- Fixed some functions that were declared as taking size_t's but defined as taking
unsigned ints.
- Added a dummy object to delete sound environments on exit.
- Fixed: FWarpTexture did not delete its Spans when destroyed.
- Changed wadclusterinfos and wadlevelinfos arrays into TArrays.
- Added the TypeInfo::AutoTypeInfoPtr for TypeInfo::m_RuntimeActors so they can
be automatically deleted.
- Changed TypeInfo::m_Types into a TArray so it will be automatically deleted
on exit.
- Fixed: TArray::Resize() did not deconstruct entries when shrinking the array.
- Changed TArray::Push() so that it calls Grow() instead of duplicating the growth
calculations itself.
- Calling TArray::Grow() for a small amount when the array is short should grow it
a bit more than it was doing.
SVN r76 (trunk)
actually work.
- Turned the list of TabCommands into a TArray because I saw lots of console
commands in the memory leak report at exit. Then I realized those were actually
key bindings, so I changed the Bindings and DoubleBindings arrays into FString
arrays.
- Fixed: FStringCVar was missing a destructor.
- Added TArray::Insert().
- Fixed: TArray::Delete() used memmove().
- Renamed Malloc(), Realloc(), and Calloc() to M_Malloc(), M_Realloc(), and
M_Calloc() so that the debug versions can be defined as macros.
- Enabled the CRT's memory leak detection in WinMain().
- Moved contents of PO_DeInit() into P_FreeLevelData().
- Removed "PolyBlockMap = NULL;" from P_SetupLevel(), because the P_FreeLevelData()
call it makes next does the exact same thing, but also freeing it if needed.
- Fixed: Unneeded memcpy in UnpackUserCmd() when ucmd and basis are the same
SVN r75 (trunk)
