qzdoom-gpl/src/thingdef/thingdef.h

236 lines
7.3 KiB
C
Raw Normal View History

2006-04-15 15:00:29 +00:00
#ifndef __THINGDEF_H
#define __THINGDEF_H
#include "doomtype.h"
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
class FScanner;
//==========================================================================
//
// This class is for storing a name inside a const PClass* field without
// generating compiler warnings. It does not manipulate data in any other
// way.
//
//==========================================================================
class fuglyname : public FName
{
public:
fuglyname() : FName() {}
fuglyname(const char *foo) : FName(foo) {}
operator const PClass *()
{
return reinterpret_cast<const PClass *>(size_t(int(*this)));
}
fuglyname &operator= (const PClass *foo)
{
FName *p = this;
*p = ENamedName(reinterpret_cast<size_t>(foo));
return *this;
}
};
//==========================================================================
//
// Dropitem list
//
//==========================================================================
struct FDropItem
{
FName Name;
int probability;
int amount;
FDropItem * Next;
};
2006-04-15 15:00:29 +00:00
FDropItem *GetDropItems(const PClass * cls);
//==========================================================================
//
// Extra info maintained while defining an actor.
//
//==========================================================================
struct Baggage
{
FActorInfo *Info;
bool DropItemSet;
bool StateSet;
int CurrentState;
FDropItem *DropItemList;
};
inline void ResetBaggage (Baggage *bag)
{
bag->DropItemList = NULL;
bag->DropItemSet = false;
bag->CurrentState = 0;
bag->StateSet = false;
}
//==========================================================================
//
// Action function lookup
//
//==========================================================================
struct AFuncDesc
{
const char *Name;
actionf_p Function;
};
AFuncDesc * FindFunction(const char * string);
//==========================================================================
//
// State parser
//
//==========================================================================
extern TArray<int> StateParameters;
extern TArray<FName> JumpParameters;
2006-04-15 15:00:29 +00:00
void ClearStateLabels();
void AddState (const char * statename, FState * state);
FState * FindState(AActor * actor, const PClass * type, const char * name);
void InstallStates(FActorInfo *info, AActor *defaults);
void MakeStateDefines(const FStateLabels *list);
void AddStateDefines(const FStateLabels *list);
FState *P_GetState(AActor *self, FState *CallingState, int offset);
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
int FinishStates (FScanner &sc, FActorInfo *actor, AActor *defaults, Baggage &bag);
int ParseStates(FScanner &sc, FActorInfo *actor, AActor *defaults, Baggage &bag);
FState *CheckState(FScanner &sc, PClass *type);
//==========================================================================
//
// Property parser
//
//==========================================================================
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
void ParseActorProperty(FScanner &sc, Baggage &bag);
void ParseActorFlag (FScanner &sc, Baggage &bag, int mod);
void FinishActor(FScanner &sc, FActorInfo *info, Baggage &bag);
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
void ParseConstant (FScanner &sc, PSymbolTable *symt, PClass *cls);
void ParseEnum (FScanner &sc, PSymbolTable *symt, PClass *cls);
int ParseParameter(FScanner &sc, PClass *cls, char type, bool constant);
- Updated lempar.c to v1.31. - Added .txt files to the list of types (wad, zip, and pk3) that can be loaded without listing them after -file. - Fonts that are created by the ACS setfont command to wrap a texture now support animated textures. - FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn with the hardware 2D path instead of being restricted to the game palette. - Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1 on a Radeon 9000. - Added back the off-by-one palette handling, but in a much more limited scope than before. The skipped entry is assumed to always be at 248, and it is assumed that all Shader Model 1.4 cards suffer from this. That's because all SM1.4 cards are based on variants of the ATI R200 core, and the RV250 in a Radeon 9000 craps up like this. I see no reason to assume that other flavors of the R200 are any different. (Interesting note: With the Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the debug Direct3D 9 runtime, but it works perfectly fine with the retail Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its math inside pixel shaders. That would explain perfectly why I can't use constants greater than 1 with PS1.4 and why it can't do an exact mapping to every entry in the color palette. - Fixed: The software shaded drawer did not work for 2D, because its selected "color"map was replaced with the identitymap before being used. - Fixed: I cannot use Printf to output messages before the framebuffer was completely setup, meaning that Shader Model 1.4 cards could not change resolution. - I have decided to let remap palettes specify variable alpha values for their colors. D3DFB no longer forces them to 255. - Updated re2c to version 0.12.3. - Fixed: A_Wander used threshold as a timer, when it should have used reactiontime. - Fixed: A_CustomRailgun would not fire at all for actors without a target when the aim parameter was disabled. - Made the warp command work in multiplayer, again courtesy of Karate Chris. - Fixed: Trying to spawn a bot while not in a game made for a crashing time. (Patch courtesy of Karate Chris.) - Removed some floating point math from hu_scores.cpp that somebody's GCC gave warnings for (not mine, though). - Fixed: The SBarInfo drawbar command crashed if the sprite image was unavailable. - Fixed: FString::operator=(const char *) did not release its old buffer when being assigned to the null string. - The scanner no longer has an upper limit on the length of strings it accepts, though short strings will be faster than long ones. - Moved all the text scanning functions into a class. Mainly, this means that multiple script scanner states can be stored without being forced to do so recursively. I think I might be taking advantage of that in the near future. Possibly. Maybe. - Removed some potential buffer overflows from the decal parser. - Applied Blzut3's SBARINFO update #9: * Fixed: When using even length values in drawnumber it would cap to a 98 value instead of a 99 as intended. * The SBarInfo parser can now accept negatives for coordinates. This doesn't allow much right now, but later I plan to add better fullscreen hud support in which the negatives will be more useful. This also cleans up the source a bit since all calls for (x, y) coordinates are with the function getCoordinates(). - Added support for stencilling actors. - Added support for non-black colors specified with DTA_ColorOverlay to the software renderer. - Fixed: The inverse, gold, red, and green fixed colormaps each allocated space for 32 different colormaps, even though each only used the first one. - Added two new blending flags to make reverse subtract blending more useful: STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that gets blended with the background, since that seems like a good idea for reverse subtraction. They also work with the other two blending operations. - Added subtract and reverse subtract blending operations to the renderer. Since the ERenderStyle enumeration was getting rather unwieldy, I converted it into a new FRenderStyle structure that lets each parameter of the blending equation be set separately. This simplified the set up for the blend quite a bit, and it means a number of new combinations are available by setting the parameters properly. SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
int ParseExpression (FScanner &sc, bool _not, PClass *cls);
bool IsExpressionConst(int id);
int EvalExpressionI (int id, AActor *self, const PClass *cls=NULL);
float EvalExpressionF (int id, AActor *self, const PClass *cls=NULL);
fixed_t EvalExpressionFix (int id, AActor *self, const PClass *cls=NULL);
enum
{
ACMETA_BASE = 0x83000,
ACMETA_DropItems, // Int (index into DropItemList)
ACMETA_ExplosionDamage,
ACMETA_ExplosionRadius,
ACMETA_DontHurtShooter,
ACMETA_MeleeSound,
ACMETA_MeleeDamage,
ACMETA_MissileName,
ACMETA_MissileHeight,
};
// Types of old style decorations
enum EDefinitionType
{
DEF_Decoration,
DEF_BreakableDecoration,
DEF_Pickup,
DEF_Projectile,
};
#if defined(_MSC_VER)
#pragma data_seg(".areg$u")
#pragma data_seg()
#define MSVC_ASEG __declspec(allocate(".areg$u"))
#define GCC_ASEG
#else
#define MSVC_ASEG
#define GCC_ASEG __attribute__((section(AREG_SECTION)))
#endif
struct StateCallData
{
FState * State;
AActor * Item;
bool Result;
};
// Macros to handle action functions. These are here so that I don't have to
// change every single use in case the parameters change.
#define DECLARE_ACTION(name) void AF_##name(AActor *self, FState *, int, StateCallData *);
// This distinction is here so that CALL_ACTION produces errors when trying to
// access a function that requires parameters.
#define DEFINE_ACTION_FUNCTION(cls, name) \
void AF_##name (AActor *self, FState *, int, StateCallData *); \
AFuncDesc info_##cls##_##name = { #name, AF_##name }; \
MSVC_ASEG AFuncDesc *infoptr_##cls##_##name GCC_ASEG = &info_##cls##_##name; \
void AF_##name (AActor *self, FState *, int, StateCallData *statecall)
#define DEFINE_ACTION_FUNCTION_PARAMS(cls, name) \
void AFP_##name (AActor *self, FState *CallingState, int ParameterIndex, StateCallData *statecall); \
AFuncDesc info_##cls##_##name = { #name, AFP_##name }; \
MSVC_ASEG AFuncDesc *infoptr_##cls##_##name GCC_ASEG = &info_##cls##_##name; \
void AFP_##name (AActor *self, FState *CallingState, int ParameterIndex, StateCallData *statecall)
#define DECLARE_PARAMINFO FState *CallingState, int ParameterIndex, StateCallData *statecall
#define PUSH_PARAMINFO CallingState, ParameterIndex, statecall
#define CALL_ACTION(name,self) AF_##name(self, NULL, 0, NULL)
#define ACTION_PARAM_START(count)
#define ACTION_PARAM_CONST(var, i) \
int var = StateParameters[ParameterIndex+i];
#define ACTION_PARAM_INT(var, i) \
int var = EvalExpressionI(StateParameters[ParameterIndex+i], self);
#define ACTION_PARAM_BOOL(var,i) \
bool var = !!EvalExpressionI(StateParameters[ParameterIndex+i], self);
#define ACTION_PARAM_FIXED(var,i) \
fixed_t var = EvalExpressionFix(StateParameters[ParameterIndex+i], self);
#define ACTION_PARAM_FLOAT(var,i) \
float var = EvalExpressionF(StateParameters[ParameterIndex+i], self);
#define ACTION_PARAM_CLASS(var,i) \
const PClass *var = PClass::FindClass(ENamedName(StateParameters[ParameterIndex+i]));
#define ACTION_PARAM_STATE(var,i) \
int var = StateParameters[ParameterIndex+i];
#define ACTION_PARAM_COLOR(var,i) \
PalEntry var = StateParameters[ParameterIndex+i];
#define ACTION_PARAM_SOUND(var,i) \
FSoundID var = StateParameters[ParameterIndex+i];
#define ACTION_PARAM_STRING(var,i) \
const char *var = FName(ENamedName(StateParameters[ParameterIndex+i]));
#define ACTION_PARAM_NAME(var,i) \
FName var = ENamedName(StateParameters[ParameterIndex+i]);
#define ACTION_PARAM_VARARG(var, i) \
int *var = &StateParameters[ParameterIndex+i];
#define ACTION_PARAM_ANGLE(var,i) \
angle_t var = angle_t(EvalExpressionF(StateParameters[ParameterIndex+i], self)*ANGLE_90/90.f);
#define ACTION_SET_RESULT(v) if (statecall != NULL) statecall->Result = v;
// Checks to see what called the current action function
#define ACTION_CALL_FROM_ACTOR() (CallingState == self->state)
#define ACTION_CALL_FROM_WEAPON() (self->player && CallingState != self->state && statecall == NULL)
#define ACTION_CALL_FROM_INVENTORY() (statecall != NULL)
- Fixed compilation with mingw again. - Added multiple-choice sound sequences. These overcome one of the major deficiences of the Hexen-inherited SNDSEQ system while still being Hexen compatible: Custom door sounds can now use different opening and closing sequences, for both normal and blazing speeds. - Added a serializer for TArray. - Added a countof macro to doomtype.h. See the1's blog to find out why it's implemented the way it is. <http://blogs.msdn.com/the1/articles/210011.aspx> - Added a new method to FRandom for getting random numbers larger than 255, which lets me: - Fixed: SNDSEQ delayrand commands could delay for no more than 255 tics. - Fixed: If you're going to have sector_t.SoundTarget, then they need to be included in the pointer cleanup scans. - Ported back newer name code from 2.1. - Fixed: Using -warp with only one parameter in Doom and Heretic to select a map on episode 1 no longer worked. - New: Loading a multiplayer save now restores the players based on their names rather than on their connection order. Using connection order was sensible when -net was the only way to start a network game, but with -host/-join, it's not so nice. Also, if there aren't enough players in the save, then the extra players will be spawned normally, so you can continue a saved game with more players than you started it with. - Added some new SNDSEQ commands to make it possible to define Heretic's ambient sounds in SNDSEQ: volumerel, volumerand, slot, randomsequence, delayonce, and restart. With these, it is basically possible to obsolete all of the $ambient SNDINFO commands. - Fixed: Sound sequences would only execute one command each time they were ticked. - Fixed: No bounds checking was done on the volume sound sequences played at. - Fixed: The tic parameter to playloop was useless and caused it to act like a redundant playrepeat. I have removed all the logic that caused playloop to play repeating sounds, and now it acts like an infinite sequence of play/delay commands until the sequence is stopped. - Fixed: Sound sequences were ticked every frame, not every tic, so all the delay commands were timed incorrectly and varied depending on your framerate. Since this is useful for restarting looping sounds that got cut off, I have not changed this. Instead, the delay commands now record the tic when execution should resume, not the number of tics left to delay. SVN r57 (trunk)
2006-04-21 01:22:55 +00:00
#endif