/* blip_buf 1.1.0. http://www.slack.net/~ant/ */ #include "internal/blip_buf.h" #include #include #include #include /* Library Copyright (C) 2003-2009 Shay Green. This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this module; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */ #if defined (BLARGG_TEST) && BLARGG_TEST #include "blargg_test.h" #endif /* Equivalent to ULONG_MAX >= 0xFFFFFFFF00000000. Avoids constants that don't fit in 32 bits. */ #if ULONG_MAX/0xFFFFFFFF > 0xFFFFFFFF typedef unsigned long fixed_t; enum { pre_shift = 32 }; #elif defined(ULLONG_MAX) typedef unsigned long long fixed_t; enum { pre_shift = 32 }; #else typedef unsigned fixed_t; enum { pre_shift = 0 }; #endif enum { time_bits = pre_shift + 20 }; static fixed_t const time_unit = (fixed_t) 1 << time_bits; enum { bass_shift = 9 }; /* affects high-pass filter breakpoint frequency */ enum { end_frame_extra = 2 }; /* allows deltas slightly after frame length */ enum { half_width = 8 }; enum { buf_extra = half_width*2 + end_frame_extra }; enum { phase_bits = 5 }; enum { phase_count = 1 << phase_bits }; enum { delta_bits = 15 }; enum { delta_unit = 1 << delta_bits }; enum { frac_bits = time_bits - pre_shift }; /* We could eliminate avail and encode whole samples in offset, but that would limit the total buffered samples to blip_max_frame. That could only be increased by decreasing time_bits, which would reduce resample ratio accuracy. */ /** Sample buffer that resamples to output rate and accumulates samples until they're read out */ struct blip_t { fixed_t factor; fixed_t offset; int avail; int size; int integrator; }; typedef int buf_t; /* probably not totally portable */ #define SAMPLES( buf ) ((buf_t*) ((buf) + 1)) /* Arithmetic (sign-preserving) right shift */ #define ARITH_SHIFT( n, shift ) \ ((n) >> (shift)) enum { max_sample = +32767 }; enum { min_sample = -32768 }; #define CLAMP( n ) \ {\ if ( (short) n != n )\ n = ARITH_SHIFT( n, 16 ) ^ max_sample;\ } static void check_assumptions( void ) { int n; #if INT_MAX < 0x7FFFFFFF || UINT_MAX < 0xFFFFFFFF #error "int must be at least 32 bits" #endif assert( (-3 >> 1) == -2 ); /* right shift must preserve sign */ n = max_sample * 2; CLAMP( n ); assert( n == max_sample ); n = min_sample * 2; CLAMP( n ); assert( n == min_sample ); assert( blip_max_ratio <= time_unit ); assert( blip_max_frame <= (fixed_t) -1 >> time_bits ); } blip_t* blip_new( int size ) { blip_t* m; assert( size >= 0 ); m = (blip_t*) malloc( sizeof *m + (size + buf_extra) * sizeof (buf_t) ); if ( m ) { m->factor = time_unit / blip_max_ratio; m->size = size; blip_clear( m ); check_assumptions(); } return m; } blip_t* blip_dup( blip_t* m ) { size_t size = sizeof *m + (m->size + buf_extra) * sizeof(buf_t); blip_t* r = (blip_t*) malloc( size ); if ( r ) memcpy( r, m, size ); return r; } void blip_delete( blip_t* m ) { if ( m != NULL ) { /* Clear fields in case user tries to use after freeing */ memset( m, 0, sizeof *m ); free( m ); } } void blip_set_rates( blip_t* m, double clock_rate, double sample_rate ) { double factor = time_unit * sample_rate / clock_rate; m->factor = (fixed_t) factor; /* Fails if clock_rate exceeds maximum, relative to sample_rate */ assert( 0 <= factor - m->factor && factor - m->factor < 1 ); /* Avoid requiring math.h. Equivalent to m->factor = (int) ceil( factor ) */ if ( m->factor < factor ) m->factor++; /* At this point, factor is most likely rounded up, but could still have been rounded down in the floating-point calculation. */ } void blip_clear( blip_t* m ) { /* We could set offset to 0, factor/2, or factor-1. 0 is suitable if factor is rounded up. factor-1 is suitable if factor is rounded down. Since we don't know rounding direction, factor/2 accommodates either, with the slight loss of showing an error in half the time. Since for a 64-bit factor this is years, the halving isn't a problem. */ m->offset = m->factor / 2; m->avail = 0; m->integrator = 0; memset( SAMPLES( m ), 0, (m->size + buf_extra) * sizeof (buf_t) ); } int blip_clocks_needed( const blip_t* m, int samples ) { fixed_t needed; /* Fails if buffer can't hold that many more samples */ assert( samples >= 0 && m->avail + samples <= m->size ); needed = (fixed_t) samples * time_unit; if ( needed < m->offset ) return 0; return (int)((needed - m->offset + m->factor - 1) / m->factor); } void blip_end_frame( blip_t* m, unsigned t ) { fixed_t off = t * m->factor + m->offset; m->avail += (int)(off >> time_bits); m->offset = off & (time_unit - 1); /* Fails if buffer size was exceeded */ assert( m->avail <= m->size ); } int blip_samples_avail( const blip_t* m ) { return m->avail; } static void remove_samples( blip_t* m, int count ) { buf_t* buf = SAMPLES( m ); int remain = m->avail + buf_extra - count; m->avail -= count; memmove( &buf [0], &buf [count], remain * sizeof buf [0] ); memset( &buf [remain], 0, count * sizeof buf [0] ); } int blip_read_samples( blip_t* m, int out [], int count ) { assert( count >= 0 ); if ( count > m->avail ) count = m->avail; if ( count ) { buf_t const* in = SAMPLES( m ); buf_t const* end = in + count; int sum = m->integrator; do { /* Eliminate fraction */ int s = ARITH_SHIFT( sum, delta_bits - 8 ); sum += *in++; *out = s; out++; /* High-pass filter */ sum -= s >> (8 - (delta_bits - bass_shift)); //<< (delta_bits - bass_shift - 8); } while ( in != end ); m->integrator = sum; remove_samples( m, count ); } return count; } int blip_peek_sample( blip_t* m ) { return ARITH_SHIFT( m->integrator, delta_bits - 8 ); } /* Things that didn't help performance on x86: __attribute__((aligned(128))) #define short int restrict */ /* Sinc_Generator( 0.9, 0.55, 4.5 ) */ static short const bl_step [phase_count + 1] [half_width] = { { 43, -115, 350, -488, 1136, -914, 5861,21022}, { 44, -118, 348, -473, 1076, -799, 5274,21001}, { 45, -121, 344, -454, 1011, -677, 4706,20936}, { 46, -122, 336, -431, 942, -549, 4156,20829}, { 47, -123, 327, -404, 868, -418, 3629,20679}, { 47, -122, 316, -375, 792, -285, 3124,20488}, { 47, -120, 303, -344, 714, -151, 2644,20256}, { 46, -117, 289, -310, 634, -17, 2188,19985}, { 46, -114, 273, -275, 553, 117, 1758,19675}, { 44, -108, 255, -237, 471, 247, 1356,19327}, { 43, -103, 237, -199, 390, 373, 981,18944}, { 42, -98, 218, -160, 310, 495, 633,18527}, { 40, -91, 198, -121, 231, 611, 314,18078}, { 38, -84, 178, -81, 153, 722, 22,17599}, { 36, -76, 157, -43, 80, 824, -241,17092}, { 34, -68, 135, -3, 8, 919, -476,16558}, { 32, -61, 115, 34, -60, 1006, -683,16001}, { 29, -52, 94, 70, -123, 1083, -862,15422}, { 27, -44, 73, 106, -184, 1152,-1015,14824}, { 25, -36, 53, 139, -239, 1211,-1142,14210}, { 22, -27, 34, 170, -290, 1261,-1244,13582}, { 20, -20, 16, 199, -335, 1301,-1322,12942}, { 18, -12, -3, 226, -375, 1331,-1376,12293}, { 15, -4, -19, 250, -410, 1351,-1408,11638}, { 13, 3, -35, 272, -439, 1361,-1419,10979}, { 11, 9, -49, 292, -464, 1362,-1410,10319}, { 9, 16, -63, 309, -483, 1354,-1383, 9660}, { 7, 22, -75, 322, -496, 1337,-1339, 9005}, { 6, 26, -85, 333, -504, 1312,-1280, 8355}, { 4, 31, -94, 341, -507, 1278,-1205, 7713}, { 3, 35, -102, 347, -506, 1238,-1119, 7082}, { 1, 40, -110, 350, -499, 1190,-1021, 6464}, { 0, 43, -115, 350, -488, 1136, -914, 5861} }; /* Shifting by pre_shift allows calculation using unsigned int rather than possibly-wider fixed_t. On 32-bit platforms, this is likely more efficient. And by having pre_shift 32, a 32-bit platform can easily do the shift by simply ignoring the low half. */ void blip_add_delta( blip_t* m, unsigned time, int delta ) { unsigned fixed = (unsigned) ((time * m->factor + m->offset) >> pre_shift); buf_t* out = SAMPLES( m ) + m->avail + (fixed >> frac_bits); int const phase_shift = frac_bits - phase_bits; int phase = fixed >> phase_shift & (phase_count - 1); short const* in = bl_step [phase]; short const* rev = bl_step [phase_count - phase]; int interp = fixed >> (phase_shift - delta_bits) & (delta_unit - 1); int delta2 = (delta * interp) >> delta_bits; delta -= delta2; /* Fails if buffer size was exceeded */ assert( out <= &SAMPLES( m ) [m->size + end_frame_extra] ); out [0] += in[0]*delta + in[half_width+0]*delta2; out [1] += in[1]*delta + in[half_width+1]*delta2; out [2] += in[2]*delta + in[half_width+2]*delta2; out [3] += in[3]*delta + in[half_width+3]*delta2; out [4] += in[4]*delta + in[half_width+4]*delta2; out [5] += in[5]*delta + in[half_width+5]*delta2; out [6] += in[6]*delta + in[half_width+6]*delta2; out [7] += in[7]*delta + in[half_width+7]*delta2; in = rev; out [ 8] += in[7]*delta + in[7-half_width]*delta2; out [ 9] += in[6]*delta + in[6-half_width]*delta2; out [10] += in[5]*delta + in[5-half_width]*delta2; out [11] += in[4]*delta + in[4-half_width]*delta2; out [12] += in[3]*delta + in[3-half_width]*delta2; out [13] += in[2]*delta + in[2-half_width]*delta2; out [14] += in[1]*delta + in[1-half_width]*delta2; out [15] += in[0]*delta + in[0-half_width]*delta2; } void blip_add_delta_fast( blip_t* m, unsigned time, int delta ) { unsigned fixed = (unsigned) ((time * m->factor + m->offset) >> pre_shift); buf_t* out = SAMPLES( m ) + m->avail + (fixed >> frac_bits); int interp = fixed >> (frac_bits - delta_bits) & (delta_unit - 1); int delta2 = delta * interp; /* Fails if buffer size was exceeded */ assert( out <= &SAMPLES( m ) [m->size + end_frame_extra] ); out [7] += delta * delta_unit - delta2; out [8] += delta2; }