In order to avoid passing around tag lists, DrawTextV needs to parse everything itself and then pass a fully initialized structure to DrawTexture. This cannot be done if all variants require a varargs tag list.
Apparently the only reason for the old approach was the 'hw' parameter which was never used.
- replaced some uses of FRACUNIT with OPAQUE when it was about translucency.
- simplified some overly complicated translucency multiplications in the SBARINFO code.
- If palette index 255 happens to be white (e.g. as in Hexen), trying to
use white with DTA_FillColor would treat it as if you had never passed
it to DrawTexture().
- Clang's optional runtime array bounds checking doesn't understand when we
intentionally "overflow" by doing this:
RGB32k[0][0][colorval]
It will warn that it was accessed at an index will past the bounds
of type 'BYTE [32]', which makes it less than useful for catching real
array bounds overflows. So now do this:
RGB32k.All[colorval]
And if you want this:
RGB32k[r][g][b]
Now do this:
RGB32k.RGB[r][g][b]
- Fixed: When locating WhiteIndex and BlackIndex in the palette index 0 was skipped.
- Fixed: When filling an area black for vid_fps or pillarbox/letterbox use GPalette.BlackIndex instead of assuming palette index 0 is black.
SVN r3807 (trunk)
onscreen. In addition, it now uses the whole height available to it. Also,
at lower resolutions, items on the compatibility options menu now cut off
the beginning of the option label rather than the option setting, making
this menu useable where previously it was not.
SVN r2044 (trunk)
unsigned integer that can use all 32 bits. They must therefore use
the unsigned mul instruction rather than the signed imul instruction.
- Fixed several signed/unsigned comparison and possibly uninitialized
variable warnings flagged by GCC.
SVN r1965 (trunk)
player sprites will retain the same precision they had when they were
rendered as part of the 3D view. (needed for propery alignment of flashes
on top of weapon sprites) It worked just fine for D3D, but software
rendering was another matter. I consequently did battle with imprecisions
in the whole masked texture drawing routines that had previously been
partially masked by only drawing on whole pixel boundaries. Particularly,
the tops of posts are calculated by multiplying by spryscale, and the
texture mapping coordinates are calculated by multiplying by dc_iscale
(where dc_iscale = 1 / spryscale). Since these are both 16.16 fixed point
values, there is a significant variance. For best results, the drawing
routines should only use one of these values, but that would mean
introducing division into the inner loop. If the division removed the
necessity for the fudge code in R_DrawMaskedColumn(), would it be worth it?
Or would the divide be slower than the fudging? Or would I be better off
doing it like Build and using transparent pixel checks instead, not
bothering with skipping transparent areas? For now, I chop off the
fractional part of the top coordinate for software drawing, since it was
the easiest thing to do (even if it wasn't the most correct thing to do).
SVN r1955 (trunk)
which could cause crashes.
- Added custom special colormaps to DECORATE.
- Cleaned up special colormap code and removed lots of dependencies on the
knowledge of the tables' contents.
SVN r1860 (trunk)
completely ignore them, either).
- Separated light level fixing out of player_t's fixedcolormap parameter.
Using a fixed light level (e.g. PowerTorch) will no longer wipe out
colored lighting.
- Moved the blending rectangle drawing into a separate discrete stage, since
doing it while copying the 3D view window to the display now blends
underneath the weapon instead of on top of it.
- Consolidated the special colormaps into a single 2D table.
- Tweaked the special colormaps slightly to make the true color results more
closely match the paletted approximations.
- fb_d3d9_shaders.h was getting unwieldy, so I moved the shaders out of the
executable and into zdoom.pk3. Shaders are still precompiled so I don't need
to pull in a dependancy on D3DX.
- Added a few more shaders to accomodate drawing weapons with all the in-game
lighting models. These are accessed with the new DrawTexture tags
DTA_SpecialColormap and DTA_ColormapStyle.
- Player weapon sprites are now drawn using Direct3D and receive all the
benefits thereof.
SVN r1858 (trunk)
so that all files are included by a central one instead of compiling
each one separately. This speeds up the compilation process by 25%
when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.
SVN r1226 (trunk)
potential crashes in the situation that con_scaletext is 2 and somebody
uses a hud message as if a hud size was specified, but forgot to actually
set the hud size.
SVN r1010 (trunk)
channel when restarting the song, rather than emitting a single note off
event which only has a 1 in 127 chance of being for a note that's playing
on that channel. Then I decided it would probably be a good idea to reset
all the controllers as well.
- Increasing the size of the internal Timidity stream buffer from 1/14 sec
(copied from the OPL player) improved its sound dramatically, so apparently
Timidity has issues with short stream buffers. It's now at 1/2 sec in
length. However, there seems to be something weird going on with
corazonazul_ff6boss.mid near the beginning where it stops and immediately
restarts a guitar on the exact same note.
- Added a new sound debugging cvar: snd_drawoutput, which can show various
oscilloscopes and spectrums.
- Internal TiMidity now plays music.
- Changed the progdir global variable into an FString.
SVN r900 (trunk)
- Sbarinfo optimization: Creating and destroying bar textures every frame is
a relatively expensive operation. We can skip the custom texture entirely
and just draw the bars directly to the screen, using the clipping parameters
for DrawTexture(). This also means bars are no longer limited to the game
palette, and the bar itself has the same resolution as the screen.
SVN r731 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
vertex buffer, made line batching automatic, and added an index buffer for
use when batching quads. The index buffer actually offered more of a
performance boost than simply batching the quads alone did.
SVN r685 (trunk)
