This allows using the UI scale or its own value, like all other scaling values.
In addition there is a choice between preserving equal pixel size or aspect ratio because the squashed non-corrected versions tend to look odd, but since proper scaling requires ununiform pixel sizes it is an option.
- changed how status bar sizes are being handled.
This has to recalculate all scaling and positioning factors, which can cause problems if the drawer leaves with some temporary values that do not reflect the status bar as a whole.
Changed it so that the status bar stores the base values and restores them after drawing is complete.
Currently this is only being used for draw operations that are not automap related, i.e. DrawLine, DrawPixel and FillSimplePoly are not subjected to it.
- made bluramount also into a gameinfo option
- negative gl_menu_blur cvar now uses gameinfo option, 0 disables it
- removed gl_menu_blur_enabled since gl_menu_blur==0 does that anyway
- made gl_menu_blur default to -1 to use gameinfo option
- add default gameinfo bluramount options
Note that the Strife status bar does not draw the health bars yet. I tried to replace the hacky custom texture with a single fill operation but had to find out that all the coordinate mangling for the status bar is being done deep in the video code. This needs to be fixed before this can be made to work.
Currently this is not usable in mods because they cannot initialize custom status bars yet.
Using I_MSTime is not precise enough, because some camera textures can be done quicker. It was pointless anyway trying to make this multithreading-safe, the entire caching idea here makes no sense if two clippers can simultaneously work on the same level data without changing the memory organization and rendering it ineffective.
src/gl/scene/gl_clipper.h:150:23: warning: comparison of integers of different signs: 'int' and 'unsigned int' [-Wsign-compare]
src/gl/dynlights/gl_aabbtree.cpp:137:24: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
src/gl/dynlights/gl_aabbtree.cpp:137:34: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
src/gl/dynlights/gl_aabbtree.cpp:137:44: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
src/gl/dynlights/gl_aabbtree.cpp:139:6: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
src/gl/dynlights/gl_aabbtree.cpp:139:30: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
src/gl/dynlights/gl_aabbtree.cpp:139:54: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
src/gl/dynlights/gl_aabbtree.cpp:142:6: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
src/gl/dynlights/gl_aabbtree.cpp:143:3: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
src/gl/dynlights/gl_aabbtree.cpp:144:3: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
src/gl/dynlights/gl_aabbtree.cpp:167:6: warning: using integer absolute value function 'abs' when argument is of floating point type [-Wabsolute-value]
src/gl/dynlights/gl_shadowmap.cpp:163:31: warning: '&&' within '||' [-Wlogical-op-parentheses]
src/p_saveg.cpp:367:16: warning: comparison of integers of different signs: 'unsigned int' and 'int' [-Wsign-compare]
src/p_saveg.cpp:402:60: warning: comparison of integers of different signs: 'int' and 'unsigned int' [-Wsign-compare]
src/p_setup.cpp:1553:39: warning: format specifies type 'ptrdiff_t' (aka 'long') but the argument has type 'int' [-Wformat]
src/scripting/zscript/zcc_compile.cpp:293:74: warning: field 'AST' will be initialized after field 'mVersion' [-Wreorder]
src/swrenderer/drawers/r_thread.cpp:113:21: warning: comparison of integers of different signs: 'int' and 'size_t' (aka 'unsigned long') [-Wsign-compare]
It looks like the memory management at use here is not capable of maintaining multiple instances simultaneously and the camera textures create another scene drawer so the initialization of the main scene drawer has to be delayed until after the camera textures are done.
- replaced TStaticArray with regular TArrays.
They had incomplete implementations preventing proper cleanup of the level loading code. It makes more sense to add the missing methods to the regular TArray and use that.
This also makes some changes to how the game nodes are used to avoid creating a copy: If the head node's pointer is stored in a separate variable, no code needs to check which of the two arrays gets used.
- consolidated the code to calculate a sprite's display angle for all 3 renderers.
As it turned out, they all differed in their feature support because they had always been updated independently by different people.
- moved testcolor and test fades into SWRenderer files.
These CCMDs work by hacking the default colormap and were never implemented for hardware rendering because they require many checks throughout the code.
This has increasingly become an obstacle with the hardware renderer, so now the values are being stored as plain data in the sector, with the software renderer getting the actual color tables when needed. While this is a bit slower than storing the pregenerated colormap, in realistic situations the added time is mostly negligible in the microseconds range.
If we have to write compiler specific code for micro-optimizations I am out.
The Posix compatible version nullified most the advantage on MSVC by writing out the XMM register to memory and then reading back the float.
That's not worth the hassle for an optimization that brings a few microseconds at best.
* dynamic lights also work in the true color software renderer and have been moved out of the OpenGL menu.
* created a separate software renderer menu and moved all relevant options there.
* delete non-applicable options when running in legacy mode.
* moved the OpenGL preferences menu one level up to eliminate a two-entry GL top level menu.
Removing this made me realize that calling the renderers' FakeFlat functions from the automap is inherently unsafe with the recent refactorings because there is absolutely no guarantee that the data may actually still be defined when the automap is being drawn.
So the best approach here is to give the automap its own FakeFlat function that runs independently of render data and assumptions of data preservation. This one can also be a lot simpler because it only needs the floor, not the ceiling info.
- optimized the math to get a plane equation from a linedef. The original code used a generic algorithm that knew nothing about the fact that Doom walls are always perfectly vertical. With this knowledge the plane calculation can be reduced to a lot less code because retrieving the normal is trivial in this special case.
- use the SSE2 rsqrtss instruction to calculate a wall's length, because this is by far the most frequent use of square roots in the GL renderer. So far this is only active on x64, it may be activated on 32 bit later as well, but only after it has been decided if 32 bit builds should be x87 or SSE2.
# Conflicts:
# src/gl/dynlights/gl_dynlight.cpp
# Conflicts:
# src/g_shared/a_dynlightdata.cpp
Since the true color software renderer also handles them there is no point keeping them on the GL side.
This also optimized how they are stored, because we no longer need to be aware of a base engine which doesn't have them.
- removed the LastCamera logic in RenderView. This code predates the first GZDoom release and apparently was only added because back then R_SetupFrame was not fully compatible with the hardware renderer. Today it is not needed anymore.
(Is there anyway to tone down GCC's warning level? It outputs too many false positives for potentially uninitialized variables in which the genuine errors get drowned.)
This one was particularly nasty because Windows also defines a DWORD, but in Windows it is an unsigned long, not an unsigned int so changing types caused type conflicts and not all could be removed.
Those referring to the Windows type have to be kept, fortunately they are mostly in the Win32 directory, with a handful of exceptions elsewhere.
Both files can now be included independently without causing problems.
This also required moving some inline functions into separate files and splitting off the GC definitions from dobject.h to ensure that r_defs does not need to pull in any part of the object hierarchy.
Most of those which still rely on ZDoom's own definition should be gone, unfortunately the code in files that include Windows headers is a gigantic mess with DWORDs being longs there intead of ints, so this needs to be done with care. DWORD should only remain where the Windows type is actually wanted.
This is one of two places that unconditionally pulled in all Windows headers into the GL code.
We also do not need the cruft for defining the standard integer types. GZDoom is C++11 which means that stdint.h will be present. So the madness with the definitions should be avoided to ensure that the types are always the same.
This function will truncate everything that is larger than LONG_MAX or smaller than LONG_MIN to fit into a long variable, but longs are 32 bit on Windows and 64 bit elsewhere, so to ensure consistency and the ability to parse larger values better use strtoll which does not truncate 32 bit values.
This can only be used if the entirety of the game code is aware and dealing with this properly. However, that isn't the case so the amount of glitches this causes far exceeds the number of desired interpolations.
- extended the maximum settable light size in GLDEFS to 1024 throughout.
- fixed: A fullbright flat should not be subjected to a sector's material color.
This reverts commit dd03bb1fcb.
Turns out that making this work in GL will create a complete mess so better remove the option as it would only cause problems.
