Only things left here are accesses to AActor::ceilingz and radius in A_PainShootSkull, plus scaleX and scaleY in the ScriptedMarine sprite setting code.
Most is still using wrapper functions around the fixed point versions.
I can't believe I missed this for more than 10 years, considering that A_CustomMissile explicitly implements this case:
It makes a crucial difference whether P_SpawnMissileZ is used or the actual z-position is temporarily changed.
Reverted this function to the position changing method of the original.
- for quakes, making a distinction between circular and elliptic thrust is pointless, so the checks were removed and both paths consolidated. The elliptic code will do exactly the same for circles and there isn't even a performance difference.
- Converted P_MovePlayer and all associated variables to floating point because this wasn't working well with a mixture between float and fixed.
Like the angle commit this has just been patched up to compile, the bulk of work is yet to be done.
- Don't bother keeping track of uncompiled nodes in a special table. Use
the regular symbol table instead. This should in the future make
compiling nodes referenced deeper than (and before) their definitions
fairly straightforward.
- Also, break up the compiler's Message() function into Warn() and Error()
and get rid of zcc_errors.h. I can't really see having a set of error
numbers being useful.
Patched up everything so that it compiles without errors again. This only addresses code related to some compile error. A large portion of the angle code still uses angle_t and converts back and forth.
- Worked aorund modern GCC bug where C++ exceptions in Objective-C++ code would result in an ICE (bug is already on their tracker, but I doubt it will be fixed unless I decide to dig into the issue myself).
- Turn off fused floating point instructions since these can cause slight deviations in floating point code.
- Use -static-libgcc when compiling on the Mac with GCC since we need to use a custom version of GCC to do so now.
- Note: ZDoom will currently still crash on exit on PowerPC since it seems to be deciding that NameManager needs to be destructed before the console commands.
- fixed: P_TryMove could loop endlessly over a list of static portals when there was an error during portal creation.
# Conflicts:
# src/gl/models/gl_models.cpp
# src/gl/scene/gl_sprite.cpp
When a spechit results in teleportation, P_TryMove never accounted for that, so that subsequent spechits either failed or succeeded, depending on where the teleport ends up.
With portal-aware positions stored within the spechit this no longer worked, so some handling is needed to revert to the original behavior in case there's no portals to consider.
The ideal solution would have been to stop checking spechits (or to block further teleports) once this happens but the likelihood of some old maps depending on this is high.
- _FPU_GETCW is defined for more than just x87. Don't use it if the
control word for the target architecture doesn't support _FPU_EXTENDED
or _FPU_DOUBLE defined, e.g. pretty much anything but x87. If I had been
using glibc on PowerPC instead of Apple's libc, I probably would have
noticed this sooner, since _FPU_GETCW is part of glibc.
- First, don't crash when travelling to a map in a hub that doesn't have
any player starts that match the position given to Teleport_NewMap (or
equivalent).
- Seconed, move the player to the location they were at when the left the
level. At least that way, they shouldn't be in random geometry or off
the map entirely.
The patch content was destructed and then accessed when loading DeHackEd file of old/unsupported version
Do not print the whole patch content to console but only a filename
Links through sector portals are not done because nearly all the checks can be performed without doing this so if it works without there's no need to add more processing time.
Will have to see if there's cases left where such a link is needed and if so, whether there's better options to do it.
For line portals such links are necessary to have proper collision detection with actors that are currently transitioning the portal.
- handle a 'restart' CCMD a bit more controlled. Instead of throwing an exception in the CCMD handler it now just flags D_DoomLoop to return.
If the exception is thrown within the CCMD this can easily happen deep inside the renderer when it calls NetUpdate. But since the software renderer with its use of global variables is not equipped to be yanked out of lile this it could leave broken data behind that caused glitches or even crashes on subsequently played maps.
Notes:
* It is actually not enough to disable the early-out condition for the current block if there's a portal. It must be disabled for the entire rest of the trace because otherwise the collected lines never get processed.
* The block bounds check cannot be done globally with portals in the game. The actual trace can easily end up outside the blockmap bounds if portal offsets are factored into the distance between the two actors.
- This could happen in co-op games that did not have enough player starts
for all the players spawning. Voodoo doll starts were not excluded from
the set of possible starts as they should have been.
- The following Hexen specials all stop 8 units above the floor:
* Ceiling_CrushRaiseAndStay
* Ceiling_CrushAndRaise
* Ceiling_LowerAndCrush
We only and Ceiling_LowerAndCrush correct. Clearly, I should have paid
more attention when the Hexen source was released for the parts that I
had already reverse engineered.
This currently only works for linked portals. For other types some major refactoring may be necessary because it not only requires multiple passes of P_RadiusAttack but also an alteration of how sight checks work.
- fixed: P_FindFloorCeiling set the floorsector for a new ceilingheight.
Note: P_DrawRailTrail still needs to be changed, at the moment rail trails through portals will not work correctly.
- be a bit smarter about what to copy from a subtrace. There's 3 distinct pieces of information here: The hit itself, the CrossedWater setting for Boom-transfers and the CrossedWater setting for 3D floors.
Note: Ideally this should return all water hits it can detect, not just the first one.
- fixed: FMultiBlockLinesIterator initialized continueup twice but forgot continuedown.
- fixed: One of the debug messages in P_AimLineAttack was missing an if (aimdebug).
- Added new state options that DECORATE got to the lemon parser.
- Enable token generation for state options. They were previously not
generated, so the grammar treated them as function calls instead.
- I don't remember why I thought using PPointer as the metatype for
PClassPointer would be preferable, but it means that PPointer's MatchID
can potentially be called for PClassPointer entries.
* any line completely parallel to the portal is rejected
* any line with one end on the same straight line than the portal is solely decided by the other vertex.
* any line with both ends behind the portal cannot be visible inside, so there's no need to check for an intersection with the view range.
* due to the above P_IntersectLines could be removed as it was redundant.
* for any line that does intersect with the portal straight, do a reverse check: If both ends of the portal lie on the other side of the line than the viewpoint, the line is between viewpoint and portal and needs to be rejected.
This fixes nearly all the phantom wall glitches in the demo map.
* when starting directly on a blockline the trace was offset by one map unit. Do this only for the internal block trace calculations but not for the variable that's being exposed to the outside because in rare situations that can create incorrect values.
* using startfrac could lead to an actor whose inside was right at that positon to be missed.
* when using startfrac the adjusted trace start was not used for all calculations, which could cause the trace to fail.
With these issues fixed, P_AimLineAttack can now successfully navigate line portals.
To allow processing the hit through an arbitrary portal without reference to the portal group table, P_AimLineAttack and P_LineAttack need to pass some more info than just the linetarget.
We need the relative positions of shooter and target within the visual reference of the other to calculate proper angles and we need to know if such a portal was crossed at all, because a few things, e.g. seeker missiles won't work with them.
- fixed setup of target acquisition for the Mage Staff.
The pre-acquired seeker target was never passed to the spawned projectiles.
- converted the P_TranslatePortal* functions to use floating point trigonometry. The combination of R_PointToAngle and finesine even created discrepancies with perfectly parallel portals which is just not acceptable.
- added a function to FPathTraverse to relocate the trace and restart from the new position.
- made P_UseLines portal aware. Traversal through line portals is complete (all types, even teleporters), whether sector portals need better treatment remains to be seen - at the moment it only checks the range at the player's vertical center.
The function to do the work scanned the full list of drawsegs to find portals, which with a large amount of masked geometry and/or drawsegs could become extremely slow.
Changed it so that R_DrawMasked collects all portal related drawsegs up front so that the actual clipping code can
a) scan a far shorter list and
b) can skip half of the validation.
Also using P_PointOnLinePrecise to shave off a small bit of additional time.
The reason is that in such a case it is very likely that the IWAD defines its own menu and will most likely not provide all assets for the base definitions. See 'Adventures of Square' for an example.
Attempts to output errors with bad characters encountered during text lumps parsing were failed miserably because of UTF-8 conversion
Example: loading of GZ-Models-r16.pk3 with GZDoom caused 'NSConcreteAttributedString initWithString:: nil value' exception
During loading of .pk3 that stores hundred of .wad's significant amount of time were spent on scrolling text to the last line
The same applies to other cases like output of thousands warnings/errors
* Arch-Vile resurrection
* Boom point pushers (due to complete lack of z-handling only for line portals.)
* A_RadiusGive
These also require a more thorough collection of portal groups than simple position checks.
It can easily happen that the lower sector has no lines below the checked area, in which case it would not set the dropoffz correctly. To prevent this, P_LineOpening must, when it checks the opening over a sector portal, actually calculate the dropoff to the lower portal itself by calling sector_t::NextLowestPointAt. It also means that FindRefPoint must calculate a proper reference point when one side of the line to be checked is part of a floor portal.
This fixes Clang complaining about unknown command option '-Wno-unused-but-set-variable' when compiling dumb.
Also I got no new warnings on Clang by excluding '-Wno-unused-result'.
This includes:
* allow one sided portal linedefs to be crossable when part of a polyobject. Due to the limitations, two-sided linedefs won't work here. For general use this is still not allowed because making them passable would require some crippling fudging.
* delay portal finalization until after polyobjects have been spawned.
* the camera interpolation also needs to handle angle differences.
The code is still not 100% complete - the most important thing that is still missing is proper handling of P_CheckPosition through arbitrary portals.
- added portal offsetting to all AproxDistance, AngleTo and Vec*To members of AActor.
- optimized displacement retrieval so that the most common case with no offset retrieves a constant null-vector which can be optimized away fully by the compiler.
- early out in P_GetOffsetPosition if there's no portal lines nearby, so that the common case can skip the traverser completely even on maps with line portals.
- made some minor changes to FPathTraverse so that the Add*Intercepts methods can be virtually overridden.
- removed the PortalTracer class because in its existing form it was too costly. Replaced with a P_GetOffsetPosition function that does the minimum required work to get to the translated destination and that's better suited for being called from the Vec*Offset methods. Other use cases will require some changes to FPathTraverse anyway, or some wrapping class like the FMultiBlock iterators.
- renamed sector_t::soundorg in centerspot, changed the type to a fixedvec2 and removed the CenterSpot #define.
Since this thing was used in lots of places that have nothing to do with sound the name made no sense. Having it as a fixed_t array also made it clumsy to use and the CenterSpot #define used a potentially dangerous type cast.
- Split specific parsing for each intrinsic out of ParseExpression0 and
into their own functions.
- Instead of reserving keywords for intrinsics, identify them by name
within TK_Identifier's handling.
* Blocking lines above or below the current sector should only block if they actually intersect with the currently checking actor.
* Sectors above a ceiling portal should not change current floor information and vice versa.
