Commit graph

41 commits

Author SHA1 Message Date
Christoph Oelckers
2962fe9f08 - silence some warnings. 2018-05-18 00:12:58 +02:00
Christoph Oelckers
852c42bbd4 - fixed dynamic lights in legacy mode.
Since they mess around with the texture coordinates, these need to be backed up and restored afterward.
There was also an issue with the ValidNormal check that was suffering from imprecisions that cause walls to be skipped, so the check was removed because it was mostly pointless.
2018-04-29 19:00:17 +02:00
Christoph Oelckers
60aebff4a1 - starting separation of hardware dependent and hardware independent code, starting with aabbtree, because it was easy. 2018-04-02 15:58:28 +02:00
Christoph Oelckers
d6fedd36b1 - moved the Plane class to vectors.h and deleted gl_geometric.h 2018-04-01 12:43:23 +02:00
Rachael Alexanderson
2bc86b52c8 - fixed a few of the more obvious logic errors 2017-11-21 04:06:24 -05:00
Magnus Norddahl
afdeed305b - Fix typo 2017-09-21 04:39:40 +02:00
Magnus Norddahl
b6b78176d2 - Add FVector4 and DVector4 to the family of vectors 2017-09-21 00:42:06 +02:00
alexey.lysiuk
fc8b697e33 Fixed compilation of POSIX targets
TODO: Need better way to detect SSE support
2017-03-13 12:51:06 +02:00
Christoph Oelckers
1fccec32d6 - add limits.h include to vectors.h for FLT_EPSILON. 2017-03-13 09:23:57 +01:00
Christoph Oelckers
4cd0d3d454 - removed the Vector class in the GL renderer and replaced all its uses with FVector3.
- optimized the math to get a plane equation from a linedef. The original code used a generic algorithm that knew nothing about the fact that Doom walls are always perfectly vertical. With this knowledge the plane calculation can be reduced to a lot less code because retrieving the normal is trivial in this special case.
- use the SSE2 rsqrtss instruction to calculate a wall's length, because this is by far the most frequent use of square roots in the GL renderer. So far this is only active on x64, it may be activated on 32 bit later as well, but only after it has been decided if 32 bit builds should be x87 or SSE2.

# Conflicts:
#	src/gl/dynlights/gl_dynlight.cpp

# Conflicts:
#	src/g_shared/a_dynlightdata.cpp
2017-03-12 19:59:45 +01:00
Christoph Oelckers
41ab08ee47 - fixed: TVector::Resized needs to consider that the input vector has a length of 0. In this case just performing the normal calculations results in an invalid vector. 2016-10-03 11:00:26 +02:00
Christoph Oelckers
966e6797e4 - fixed: The view path for checking whether the player sprite should be drawn during a portal transition was never set properly in the portal transitioning case. 2016-05-09 23:16:06 +02:00
MajorCooke
c972caa9f3 - Added rollIntensity and rollWave to A_QuakeEx.
- Instead of moving the camera around, it rolls the camera.
- This only has an effect in GZDoom.
2016-04-27 13:42:15 +02:00
Randy Heit
b8e3e1f095 Remove BAM_FACTOR from FAngle, because it takes up physical space in the struct 2016-04-23 17:27:36 -05:00
Christoph Oelckers
6445615b5d - fixed the sound location calculations which got somewhat broken by the constant changes during the conversion. 2016-03-31 21:13:32 +02:00
Christoph Oelckers
9412ce45d6 - floatified portals.cpp and most of p_maputl.cpp. 2016-03-31 16:52:25 +02:00
Christoph Oelckers
66929cbaff - floatified p_trace, p_slopes and p_udmf.cpp.
- major cleanup of unused code.
2016-03-30 16:30:22 +02:00
Christoph Oelckers
217414cb1c -floatified P_ExplodeMissile and P_XYMovement 2016-03-28 00:55:57 +02:00
Christoph Oelckers
dabed04d2a - floatification of p_3dfloors, p_3dmidtex and p_acs.cpp plus some leftovers.
- removed all references to Doom specific headers from xs_Float.h and cmath.h.
2016-03-26 12:36:15 +01:00
Christoph Oelckers
4a79602325 - floatification of g_shared.
- rewrote FraggleScript's movecamera function because it was utterly incomprehensible.
2016-03-24 01:46:11 +01:00
Christoph Oelckers
6557f3b8c8 - floatified quake and weapon code 2016-03-23 20:45:48 +01:00
Christoph Oelckers
c830801da3 - g_hexen almost done except for 3 things that require more extensive changes. 2016-03-21 22:20:10 +01:00
Christoph Oelckers
f1602882c8 - added a no-parameter Spawn function for inventory items that never show on the map, because the coordinate and replacement parameters will always be 0 for them.
- started converting g_hexen.

Most importantly this removes CHolyWeave as it is just a specialized version of A_Weave with far more convoluted use of parameters.
2016-03-21 14:00:05 +01:00
Christoph Oelckers
51b05d331d - replaced AActor::vel and player_t::Vel with a floating point version.
- Converted P_MovePlayer and all associated variables to floating point because this wasn't working well with a mixture between float and fixed.

Like the angle commit this has just been patched up to compile, the bulk of work is yet to be done.
2016-03-20 00:54:18 +01:00
Christoph Oelckers
aa09cbdada - renamed some functions and fixed a few more conversion errors. 2016-03-17 00:07:37 +01:00
Christoph Oelckers
b140d71c49 - several fixes. 2016-03-16 22:29:35 +01:00
Christoph Oelckers
29a7fe33f3 - fixed some minor issues found during reviewing the code. 2016-03-16 14:10:13 +01:00
Christoph Oelckers
671291227e - first stage of converting actor angles to float complete
Patched up everything so that it compiles without errors again. This only addresses code related to some compile error. A large portion of the angle code still uses angle_t and converts back and forth.
2016-03-16 12:41:26 +01:00
Christoph Oelckers
161d03231a - added custom math routines for reliability. 2016-03-11 15:45:47 +01:00
Christoph Oelckers
9843f16cc0 - some rework of vectors.h, mostly to remove all those silenced double->float conversions. 2016-03-10 22:36:28 +01:00
Christoph Oelckers
f8ebfb541e - use typedefs for TVector<double> etc.
(Better have this out of the way before messing around with this stuff...)
2016-03-10 20:45:45 +01:00
Randy Heit
55142078d8 Normalize line endings 2016-03-01 09:47:10 -06:00
Christoph Oelckers
f7e27032dc - fixed: The default vertical spread for the BFG tracers was set to 32*FRACUNIT instead of 32*ANGLE_1. 2016-02-12 18:55:18 +01:00
Christoph Oelckers
00d5bee72f - ...now where did that 'F' come from...?
SVN r4139 (trunk)
2013-02-16 10:48:03 +00:00
Christoph Oelckers
d71b0609f0 - fixed incorrect -= operators in vectors.h
SVN r4138 (trunk)
2013-02-16 09:41:54 +00:00
Randy Heit
b9ea9a415e - Added Polyobj_MoveTo, Polyobj_OR_MoveTo, and Polyobj_Stop.
- Cleaned up a couple of warnings.

SVN r2483 (trunk)
2010-08-01 19:14:10 +00:00
Randy Heit
344dda4a1a - Replaced toint/quickertoint with the portable routines from xs_Float.h. The
former used fistp, which is not portable across platforms, so cannot be
  used in the play simulation. They were only suitable for the renderer.
  xs_Float.h also has a very fast float->fixed conversion, so FLOAT2FIXED
  uses that now.
  (And I also learned that the FPU's round to nearest is not the rounding I
  learned in grade school but actually Banker's Rounding. I had no idea.)
  (Also, also, the only thing that could have made quickertoint faster than
  toint was that it stored a 32-bit int. I never timed them, and I doubt in
  practice there was any real difference between the two.)
- Changed atan2f to atan2. Using floats is not a win, because the result is
  returned as a double on the x87 stack, which the caller then needs to cast
  down to a float using fst/fld.

SVN r1990 (trunk)
2009-11-20 05:34:20 +00:00
Randy Heit
4ebfdac887 - Changed all coordinates for DrawTexture() to floating point so that the
player sprites will retain the same precision they had when they were
  rendered as part of the 3D view. (needed for propery alignment of flashes
  on top of weapon sprites) It worked just fine for D3D, but software
  rendering was another matter. I consequently did battle with imprecisions
  in the whole masked texture drawing routines that had previously been
  partially masked by only drawing on whole pixel boundaries. Particularly,
  the tops of posts are calculated by multiplying by spryscale, and the
  texture mapping coordinates are calculated by multiplying by dc_iscale
  (where dc_iscale = 1 / spryscale). Since these are both 16.16 fixed point
  values, there is a significant variance. For best results, the drawing
  routines should only use one of these values, but that would mean
  introducing division into the inner loop. If the division removed the
  necessity for the fudge code in R_DrawMaskedColumn(), would it be worth it?
  Or would the divide be slower than the fudging? Or would I be better off
  doing it like Build and using transparent pixel checks instead, not
  bothering with skipping transparent areas? For now, I chop off the
  fractional part of the top coordinate for software drawing, since it was
  the easiest thing to do (even if it wasn't the most correct thing to do).


SVN r1955 (trunk)
2009-11-01 01:27:33 +00:00
Christoph Oelckers
238d4c3fac - More things from Gez's experimental build:
* info CCMD to print extended actor information (not fully implemented yet)
  * summonmbf CCMD.
  * Beta BFG code pointer (but not the related missiles yet.)
  * PowerInvisibility enhancements.
  * ScoreItem with one significant change: Added a score variable that can be
    checked through ACS and DECORATE. The engine itself will do nothing with it.
  * Nailgun option for A_Explode.
  * A_PrintBold and A_Log.
  * A_SetSpecial.


SVN r1819 (trunk)
2009-09-14 19:44:14 +00:00
Randy Heit
47c401f4ec - Replaced the vector math routines with the ones I developed for the FP code.
SVN r454 (trunk)
2007-01-19 02:00:39 +00:00
Randy Heit
cf11cbdb30 Directory restructuring to make it easier to version projects that don't build zdoom.exe.
SVN r4 (trunk)
2006-02-24 04:48:15 +00:00